B5FH-5961-01EN-00.book Page 1 Monday, April 29, 2002 2:58 PM
Copyright
Copyright
Fujitsu PC Corporation has made every effort to ensure
the accuracy and completeness of this document.
However, as ongoing development efforts are continually improving the capabilities of our products, we
cannot guarantee the accuracy of the contents of this
document. We disclaim liability for errors, omissions,
or future changes.
Fujitsu, the Fujitsu logo, and LifeBook are registered
trademarks of Fujitsu Limited.
The following are registered trademarks of IBM
Corporation: IBM, IBM PC AT, IBM PS/2.
The following are registered trademarks of Microsoft
Corporation: MS, MS-DOS, Windows.
PCMCIA is a trademark of the Personal Computer
Memory Card International Association.
EarthLink is a registered trademark of EarthLink
Network, Inc.
Crusoe, LongRun, and Transmeta are trademarks of the
Transmeta Corporation.
Adobe Acrobat Reader is a registered trademark of
Adobe Systems, Inc.
Netscape 6.01 is a registered trademark of Netscape
Communications Corporation.
PowerQuest and Drive Image are registered trademarks
of PowerQuest Corporation.
SigmaTel is a registered trademark of SigmaTel, Inc.
Rage Mobility-M is a trademark of ATI Technologies,
Inc.
McAfee is a registered trademark of Network Associates/
McAfee.com Inc.
All other trademarks mentioned herein are the property
of their respective owners.
This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions:
(1) This device must not be allowed to cause harmful interference, (2) This device must accept any interference
received, including interference that may cause undesired operation.
LifeBook P1110 Notebook
Complies with Part 15 of the FCC Rules.
B5FH-5961-01EN-00.book Page 2 Monday, April 29, 2002 2:58 PM
LifeBook P1000 Notebook
B5FH-5961-01EN-00.book Page 3 Monday, April 29, 2002 2:58 PM
B5FH-5961-01EN-00.book Page 1 Monday, April 29, 2002 2:58 PM
1
Preface
B5FH-5961-01EN-00.book Page 2 Monday, April 29, 2002 2:58 PM
LifeBook P1000 Notebook
B5FH-5961-01EN-00.book Page 1 Monday, April 29, 2002 2:58 PM
Preface
Preface
ABOUT THIS GUIDE
This manual explains how to operate your LifeBook
notebook’s hardware and built-in system software. Your
notebook is compatible with the IBM® PC AT.
It comes with Microsoft Windows® 2000, Windows XP
Home, or Windows XP Pro pre-installed.
The LifeBook P Series notebook is a completely selfcontained unit with an active-matrix (TFT) color LCD
display with touch screen capabilities. It has a powerful
interface that enables it to support a variety of optional
features.
Conventions Used in the Guide
Keyboard keys appear in brackets.
Example: [Fn], [F1], [ESC], [ENTER] and [CTRL].
Pages with additional information about a specific topic
are cross-referenced within the text.
Example: (See page xx.)
On screen buttons or menu items appear in bold
Example: Click OK to restart your LifeBook notebook.
DOS commands you enter appear in Courier type.
Example: Shutdown the computer?
POINT
The point icon highlights information that will enhance
your understanding of the subject material.
CAUTION
The caution icon highlights information that is
important to the effective operation of your computer,
or to the integrity of your files. Please read all caution
information carefully.
WARNING
The warning icon highlights information that can be
hazardous to you, your LifeBook notebook, or your
files. Please read all warning information carefully.
FUJITSU CONTACT INFORMATION
Service and Support
You can contact Fujitsu Service and Support in the
following ways:
n
Toll free: 1-800-8Fujitsu (1-800-838-5487)
n
Fax: 1-901-259-5700
n
E-mail: 8fujitsu@fujitsupc.com
n
Web site: http://www.fujitsupc.com
Before you place the call, you should have the
following information ready so that the customer
support representative can provide you with the
fastest possible solution:
n
Product name
n
Product configuration number
n
Product serial number
n
Purchase date
n
Conditions under which the problem occurred
n
Any error messages that have occurred
n
Hardware configuration
n
Type of device connected, if any
Fujitsu Online
You can go directly to the online Fujitsu Product catalog
for your LifeBook notebook by clicking on the LifeBook
Accessories Web site URL link, located in the Windows
Start menu.
You can also reach Fujitsu Service and Support online by
clicking on the Fujitsu Service and Support Web site
URL link, located in the Service and Support Software
folder of the Windows Start menu.
POINT
You must have an active internet connection to
use the online URL links.
WARRANTY
Your LifeBook notebook is backed by a three- or oneyear International Limited Warranty. Check the service
kit that came with your notebook for warranty terms
and conditions.
1
B5FH-5961-01EN-00.book Page 2 Monday, April 29, 2002 2:58 PM
LifeBook P1000 Notebook – Section One
2
B5FH-5961-01EN-00.book Page 3 Monday, April 29, 2002 2:58 PM
2
Getting to Know
Your LifeBook Notebook
3
B5FH-5961-01EN-00.book Page 4 Monday, April 29, 2002 2:58 PM
LifeBook P1000 Notebook – Section Two
4
B5FH-5961-01EN-00.book Page 5 Monday, April 29, 2002 2:58 PM
Getting to Know Your Notebook
Figure 2-1 Fujitsu LifeBook P Series notebook
Overview
This section describes the components of your Fujitsu
LifeBook P Series notebook. We strongly recommend
that you read it before using your notebook – even if you
are already familiar with notebook computers.
UNPACKING
When you receive your LifeBook notebook, unpack it
carefully, and compare the parts you have received with
the items listed below.
n
LifeBook P Series notebook(Figure 2-1)
n
AC adapter with AC power cord (Figure 2-2)
n
External USB Floppy Disk Drive (Figure 2-3)
n
Lithium ion battery
n
Phone/Modem (RJ-11) telephone cable
n
Mini-VGA cable
n
Two additional pointer caps
n
Stylus
n
Driver and Application Restore CD
n
Getting Started Guide
n
LifeBook User’s Guide
n
International Limited Warranty Brochure
n
Microsoft Works CD (Windows XP
Home model only)
n
Certification of Authenticity with operating system
manual.
n
Premium Care registration card and envelope
n
Fujitsu Service Assistant flyer
n
Fujitsu Service Assistant application CD
Once you have checked and confirmed that your LifeBook system is complete, read through the following
pages to learn about all of your notebook’s components.
Figure 2-2 AC Adapter
Figure 2-3 External Floppy Disk Drive
5
B5FH-5961-01EN-00.book Page 6 Monday, April 29, 2002 2:58 PM
LifeBook P1000 Notebook – Section Two
Display Panel
E-Mail Button
Stereo
Speaker
Quick Point
Pointing Device
Figure 2-4 LifeBook notebook with display open
Locating the Controls
and Connectors
TOP AND FRONT COMPONENTS
The following is a brief description of your LifeBook
notebook’s top and front components.
Display Panel
The display panel is a color touch screen LCD panel with
back lighting for the display of text and graphics.
E-Mail Button
The E-Mail button helps you manage your e-mail.
Stylus (pen)
The stylus is used to interact with the touch screen.
(See Touch Screen on page 16 for more information)
Stylus (pen)
Status Indicator Panel
Suspend/Resume/
Power On Button
Keyboard
Stereo Speaker
Keyboard
A full-size keyboard with dedicated Windows
keys. (See Keyboard on page 13 for more information)
Suspend/Resume/Power On Button
The Suspend/Resume/Power On button allows you to
suspend notebook activity without powering off, resume
your LifeBook notebook from suspend mode, and
power on your notebook when it has been shut down
from Windows. (See Suspend/Resume Button on page 25
for more information)
Status Indicator Panel
The Status Indicator Panel displays symbols that correspond with a specific component of your LifeBook notebook. (See Status Indicator Panel on page 11 for more
information)
Stereo Speakers
The built-in dual speakers allow for stereo sound.
Quick Point Pointing Device
The Quick Point pointing device consists of two mouselike buttons and one cursor control button. (See Quick
Point Pointing Device on page 15 for more information)
6
B5FH-5961-01EN-00.book Page 7 Monday, April 29, 2002 2:58 PM
Getting to Know Your Notebook
Wireless LAN On/Off Switch
(on wireless LAN models only)
OFF PositionON Position
Figure 2-5 LifeBook notebook left-side panel
LEFT-SIDE PANEL COMPONENTS
The following is a brief description of your LifeBook
notebook’s left-side components.
Wireless LAN On/Off Switch
(On wireless LAN models only)
The Wireless LAN On/Off Switch turns the wireless LAN
device on and off.
Wireless LAN Antenna
(On wireless LAN models only)
The Wireless LAN Antenna is located behind the cover.
It is used for establishing communications with other
wireless devices.
Wireless LAN Antenna
(on wireless LAN models only)
7
B5FH-5961-01EN-00.book Page 8 Monday, April 29, 2002 2:58 PM
LifeBook P1000 Notebook – Section Two
Stylus
Headphone Jack
Microphone Jack
PC Card Eject Button
Figure 2-6 LifeBook notebook right-side panel
RIGHT-SIDE PANEL COMPONENTS
The following is a brief description of your LifeBook
notebook’s right-side components.
Headphone Jack
The headphone jack allows you to connect headphones
or powered external speakers. (See Headphone Jack on
page 35 for more information)
Microphone Jack
The microphone jack allows you to connect an external
mono microphone. (See Microphone Jack on page 35 for
more information)
PC Card Slot
The PC Card Slot allows you to install one Type II PC
Card. (See PC Cards on page 34 for more information)
PC Card Eject Button
The PC Card eject button allows you to remove PC
Cards from the PC Card slot. (See PC Cards on page 34
for more information)
Air Vents
PC Card Slot
DC Power Jack
Air Vents
The air vents allow for proper cooling of the system
while it is operating.
DC Power Jack
The DC power jack allows you to plug in the AC adapter
or the optional Auto/Airline adapter to power your notebook and charge the internal Lithium ion battery.
8
B5FH-5961-01EN-00.book Page 9 Monday, April 29, 2002 2:58 PM
Anti-Theft Lock Slot
Mini-VGA Jack
Modem (RJ-11) Jack
LAN (RJ-45) Jack (not included with
Wireless LAN-configured system)
Getting to Know Your Notebook
USB Ports
Figure 2-7 LifeBook notebook back panel
BACK PANEL COMPONENTS
Following is a brief description of your LifeBook notebook’s back panel components.
Anti-theft Lock Slot
The anti-theft lock slot allows you to attach an optional
physical lock down device.
Mini-VGA Jack
The mini-VGA jack allows you to connect your LifeBook
notebook to an external monitor with the included cable
adapter. (See Mini-VGA Port on page 35 for more infor-
mation)
USB Ports
The two USB ports allow you to connect Universal Serial
Bus devices. (See Universal Serial Bus Ports on page 35 for
more information)
Modem (RJ-11) Telephone Port
The Modem (RJ-11) telephone jack is for attaching
a telephone line to the internal multinational 56K
modem. (See Modem (RJ-11) Telephone Jack on page 35
for more information)
WARNING
The internal modem is not intended for use with Digital
PBX systems. Do not connect the internal modem to a
Digital PBX as it may cause serious damage to the
internal modem or your entire notebook. Consult your
PBX manufacturer’s documentation for details. Some
hotels have Digital PBX systems. Be sure to find out
BEFORE you connect your modem.
POINT
The internal multinational modem is designed to the
ITU-T V.90 standard. Its maximum speed of 53000bps
is the highest allowed by FCC, and its actual connection
rate depends on the line conditions. The maximum
speed is 33600bps at upload.
For additional information about the multinational
modem, refer to the Fujitsu web site at:
www.fujitsupc.com/modems
LAN (RJ-45) Jack
The internal LAN (RJ-45) jack is used for an internal
Fast Ethernet (10/100 Base-TX) connection. This jack is
not included with systems that are configured with an
Integrated Wireless LAN. (See Internal LAN (RJ-45) Jack
on page 35 for more information)
9
B5FH-5961-01EN-00.book Page 10 Monday, April 29, 2002 2:58 PM
LifeBook P1000 Notebook – Section Two
Main Unit and
Configuration
Label
(approximate
location)
Battery Bay
Release Button
Figure 2-8 LifeBook notebook bottom panel
BOTTOM COMPONENTS
The following is a brief description of your LifeBook
notebook’s bottom panel components.
Battery Bay Release Buttons
Slide the release buttons to release the internal battery.
Lithium ion Battery Bay
The battery bay contains the internal Lithium ion
battery. It can be opened for the removal of the battery
when stored over a long period of time or for swapping
a discharged battery with a charged Lithium ion battery.
(See Lithium ion Battery on page 31 for more information)
Main Unit and Configuration Label
The configuration label shows the model number and
other information about your LifeBook notebook. In
addition, the configuration portion of the label has the
serial number and manufacturer information that you
will need to give your support representative. It identifies the exact version of various components of your
notebook.
Battery Bay
Release Button
Lithium ion
Battery Bay
10
B5FH-5961-01EN-00.book Page 11 Monday, April 29, 2002 2:58 PM
Battery
Charging
Indicator
Getting to Know Your Notebook
Power
AC Adapter
Battery
Identifier
Battery
Level
Hard Drive
Access
Figure 2-9 Status Indicator Panel
Status Indicator Panel
The Status Indicator displays symbols that correspond to
a specific component of your Fujitsu LifeBook notebook. These symbols tell you how each of those components are operating. (Figure 2-9)
POWER INDICATOR
The Power indicator symbol states whether your
system is operational. It has several different states,
each of which tells you what mode your notebook is
in at that time.
■
Steady On: This means that there is power to your
LifeBook notebook and that it is ready for use.
■
Flashing: This means that your LifeBook notebook is
in Suspend mode.
■
Steady Off: This means that your system is either in
Hibernation mode, or that your LifeBook notebook
has been turned off with the power switch.
If you are charging your battery, the Power indicator
symbol will remain on even if your notebook is shut off.
The Power indicator symbol will also remain on if you
have either adapter connected and are shut down from
Windows, but have not turned off the power switch.
PC Card
Access
■
On: This means that either of the adapters are
Numeric
Lock
Scroll Lock
Caps Lock
currently in use.
■
Off: Power is only coming from the batteries, and
you do not have an adapter connected.
BATTERY LEVEL INDICATOR
The Battery Level indicator states whether or not the
primary Lithium ion battery is installed. In addition,
this symbol states how much charge is available within
the installed battery. The symbol will only be displayed
for a battery that is currently installed in your LifeBook
notebook. (Figure 2-10)
76%–100% Charging
76%–100%
51%–75%
26%–50%
11%–25%
Low Warning <11%
Critical Low or
Dead Battery
AC ADAPTER INDICATOR
The AC Adapter indicator states whether your notebook
is operating from the AC adapter, the Auto/Airline
adapter or the batteries. This icon has two different
states that can tell you what power source your LifeBook
notebook is using.
Damaged Battery
Figure 2-10 Battery Level Indicator
CAUTION
A damaged battery must be replaced. (Figure 2-10)
11
B5FH-5961-01EN-00.book Page 12 Monday, April 29, 2002 2:58 PM
LifeBook P1000 Notebook – Section Two
POINT
If there is no battery activity, the power adapters are not
connected, and the power switch is Off, the Battery
Level indicator will also be off.
BATTERY CHARGING INDICATOR
Located to the left of the Battery Level indicator is a
small arrow symbol. This symbol states whether the
battery is charging. This indicator operates whether the
power switch is in the On or Off position, and will flash
if the battery is too hot or cold to charge.
CAUTION
Batteries subjected to shocks, vibration or extreme
temperatures can be permanently damaged.
HARD DRIVE ACCESS INDICATOR
The Hard Drive Access indicator states whether your
internal hard drive is being accessed.
PC CARD ACCESS INDICATOR
The PC Card Access indicator states whether or not your
notebook is accessing a PC Card. The indicator will flash
if your software tries to access a PC Card, even if there is
no card installed. (See PC Cards on page 34 for more
information)
NUMERIC LOCK INDICATOR
The Numeric Lock indicator states that the internal
keyboard is set in ten-key numeric keypad mode.
CAPS LOCK INDICATOR
The Caps Lock indicator states that your keyboard is set
to type in all capital letters.
SCROLL LOCK INDICATOR
The Scroll Lock indicator states that your scroll lock is
active.
12
B5FH-5961-01EN-00.book Page 13 Monday, April 29, 2002 2:58 PM
Function Keys
Getting to Know Your Notebook
x
Fn Key
Windows
Start Key
Numeric Keypad
Figure 2-11 Keyboard
Keyboard
USING THE KEYBOARD
Your Fujitsu LifeBook notebook has an integral 82-key
keyboard. The keys perform all the standard functions of
a 101-key keyboard, including the Windows key and
other special function keys. This section describes the
following keys. (Figure 2-11)
n
Numeric keypad: Your notebook allows certain keys to
serve dual purposes, both as standard characters and
as numeric and mathematical keys. The ability to toggle between the standard character and numerical keys
is controlled through the [NumLk] key.
n
Cursor keys: Your keyboard contains four arrow
keys for moving the cursor or insertion point to the
right, left, up, or down within windows, applications
and documents.
n
Function keys: The keys labeled [F1] through [F12],
are used in conjunction with the [Fn] key to produce
special actions that vary depending on what program
is running.
n
Windows key: This key works with your Windows
operating system and functions the same as the
onscreen Start menu button.
Cursor Keys
Once this feature is activated you can enter numerals 0
through 9, perform addition (+), subtraction (-),
multiplication (*), or division (/), and enter decimal
points (.) using the keys designated as ten-key function
keys. The keys in the numeric keypad are marked on the
front edge of the key to indicate their secondary functions.
(Figure 2-11)
WINDOWS KEY
Your LifeBook notebook has one Windows Start key.
The Start key displays the Start menu. This button functions the same as your onscreen Start menu button.
(Please refer to your Windows documentation for additional information regarding the Windows key.)
(Figure 2-11)
CURSOR KEYS
The cursor keys are the four arrow keys on the keyboard
which allow you to move the cursor up, down, left and
right in applications. In programs such as Windows
Explorer, it moves the “focus” (selects the next item up,
down, left, or right). (Figure 2-11)
NUMERIC KEYPAD
Certain keys on the keyboard perform dual functions as
both standard character keys and numeric keypad keys.
NumLk can be activated by pressing the [NumLk] keys.
Turning off the NumLk feature is done the same way.
13
B5FH-5961-01EN-00.book Page 14 Monday, April 29, 2002 2:58 PM
LifeBook P1000 Notebook – Section Two
FUNCTION KEYS
Your LifeBook notebook has 12 function keys, F1
through F12. The functions assigned to these keys differ
for each application. You should refer to your software
documentation to find out how these keys are used.
(Figure 2-11)
The [Fn] key provides extended functions for the
notebook and is always used in conjunction with
another key.
n
[Fn+F3]: Pressing [F3] while holding [Fn] will toggle
the Audio Mute on and off.
n
[Fn+F4]: Pressing [F4] while holding [Fn] will toggle
the Quick Point feature on and off. Note that the
[Fn+F4] combination only works if Manual Setting is
selected in the BIOS. (See “Entering the BIOS Setup
Utility” on page 23)
n
[Fn+F5]: Pressing [F5] while holding [Fn] allows
you to toggle between video compensation and no
compensation. (Video compensation controls spacing
on the display. When it is enabled, displays with less
than 1024 x 600 pixel resolution will still cover the
entire screen.)
n
[Fn+F6]: Pressing [F6] repeatedly while holding [Fn]
will lower the brightness of your display.*
n
[Fn+F7]: Pressing [F7] repeatedly while holding [Fn]
will increase the brightness of the display.*
n
[Fn+F8]: Pressing [F8] repeatedly while holding [Fn]
will decrease the volume of your LifeBook notebook.**
n
[Fn+F9]: Pressing [F9] repeatedly while holding [Fn]
will increase the volume of your LifeBook notebook.**
n
[Fn+F10]: Pressing [F10] while holding [Fn] allows
you to change your selection of where to send your
display video. Each time you press the combination
of keys you will step to the next choice. The choices,
in order, are: built-in display panel only, both built-in
display panel and external monitor or external monitor only.
n
[Fn+PgUp], [Fn+PgDn], [Fn+Home], and [Fn+End]:
These key combinations allow you to navigate more
quickly around the display.
* There are eight brightness levels.
** There are 17 audio levels.
14
B
5FH-5961-01EN-00.book Page 15 Monday, April 29, 2002 2:58 PM
Getting to Know Your Notebook
Left Button
Right Button
Figure 2-12 Quick Point pointing device
Quick Point
Pointing Device
The Quick Point is built into your LifeBook notebook. It
is used to control the movement of the cursor to select
items on your display panel. The Quick Point is
composed of a cursor control at the center of the
keyboard and three buttons on the palm rest of your
notebook. The cursor control works the same way a
mouse ball does, and moves the cursor around the
display. It only requires light pressure with the tip of
your finger, and the more pressure you use, the faster the
cursor will move. The left button functions the same as a
left mouse button while the right button has the same
function as a right mouse button. When used with the
cursor control, the middle button allows you to scroll up
and down a screen. The actual functionality of the
buttons may vary depending on the application that is
being used. (Figure 2-12)
CLICKING
Clicking means pushing and releasing a button. To leftclick, move the cursor to the item you wish to select,
press the left button once, and then immediately release
it. To right-click, move the cursor to the item you wish
to select, press the bottom button once, and then immediately release it. (Figure 2-13)
Cursor
Control
DOUBLE-CLICKING
Double-clicking means pushing and releasing the left
button twice in rapid succession. This procedure does
not function with the right button. To double-click,
move the cursor to the item you wish to select, press
and release the left button twice. (Figure 2-14)
Figure 2-14 Double-clicking
POINTS
n
If the interval between clicks is too long, the
double-click will not be executed.
n
Parameters for the Quick Point can be adjusted
from the Mouse Properties dialog box located in
the Windows Control Panel.
DRAGGING
Dragging means pressing and holding the left button,
while moving the cursor. To drag, move the cursor to
the item you wish to move. Press and hold the left
button while moving the item to its new location
and then release it. (Figure 2-15)
Figure 2-13 Clicking
Figure 2-15 Dragging
15
B
5FH-5961-01EN-00.book Page 16 Monday, April 29, 2002 2:58 PM
LifeBook P1000 Notebook – Section Two
QUICK POINT DEVICE
CONTROL ADJUSTMENT
The Windows Control Panel allows you to customize
your Quick Point with selections made from within the
Mouse Properties dialog box. There are three aspects of
Quick Point operation, which you can adjust:
n
Buttons: This tab lets you set up the buttons for right
or left handed operation, in addition to setting up the
time interval allowed between clicks in doubleclicking.
n
Pointers: This tab lets you set up the scheme for
the cursor depending on its functionality.
n
Motion: This tab lets you set up a relation between
the speed of your finger motion and the speed of the
cursor. It also allows you to enable a Pointer Trail for
the cursor arrow.
TOU C H SCR E EN
The integrated Touch Screen allows you to use either the
included stylus or your fingertip, as a pointing device.
You can use the stylus to click, double-click, drag items
and icons, or to draw like a pen or pencil in applications
that support this behavior, such as drawing or painting
programs. See the documentation that came with your
application for details. (Figure 2-16)
Clicking
To left-click, touch the object you wish to select and then
lift the stylus tip immediately. You also have the option
to perform the left-click operation by tapping lightly
with your finger on the Touch Screen once. (Figure 2-17)
To right-click, go to Start --> Programs --> Fujitsu
Touch Panel. From that window, you can specify a right
button tool by using the Touch Panel Configuration
Control button prior to the desired right mouse click. It
can be used two ways: by holding down the key or by
pressing the key once.
Figure 2-17 Clicking the Touch Screen
Double-Clicking
To double-click, touch the item twice, and then immediately remove the stylus tip. You also have the option to
perform the double-click operation by tapping lightly
with your finger on the Touch Screen twice.
(Figure 2-18)
Figure 2-16 Using the Stylus with the Touch Screen
CAUTION
To avoid potential scratching and damage, never use
anything but the included stylus or your finger with the
Touch Screen.
Figure 2-18 Double-clicking the Touch Screen
POINTS
n
If the interval between taps is too long, the doubleclick will not be executed.
n
Parameters for the Touch Screen can be adjusted
from the Mouse Properties dialog box located in the
Windows Control Panel.
POINT
To purchase additional or replacement styluses,
visit Fujitsu’s accessories web site at:
http://www.fujitsupc.com.
Dragging
Dragging means moving an item with the stylus by
touching the screen, moving and then lifting the stylus.
To drag, touch the Touch Screen with your stylus on the
item you wish to move. While continuing to touch the
screen with the stylus, drag the item to its new location
16
B
5FH-5961-01EN-00.book Page 17 Monday, April 29, 2002 2:58 PM
Getting to Know Your Notebook
by moving the stylus across the screen, and then lifting
the stylus to release it. Dragging can also be done using
your fingertip. (Figure 2-19)
Figure 2-19 Dragging on the Touch Screen
Right-clicking
It is possible for you to perform right-click functions
with the stylus.
1. Click Start --> Programs (or All Programs, in
Windows XP) --> Fujitsu Touch Panel
--> Touch Panel Configuration.
2. When the Right Button Tool screen appears, select
either “Hold [Ctrl] key down and touch the screen”
or “Press [Ctrl] key and touch the screen”.
5. Once you have selected the twelve symbols, press the
[ENTER] key.
POINT
If you receive an error message at this point, you
selected fewer than twelve symbols. Click OK and begin
again at Step 2.
6. Touch the stylus to various points on the screen to
verify that the screen is correctly calibrated. If you
are satisfied with the screen’s calibration, press the
[ENTER] key. If you are not satisfied, press the
[HOME] key to begin again at Step 2.
When you select “Hold [Ctrl]...”, the stylus will act
as a right mouse button when you hold down the
control key while touching the screen.
When you select “Press [Ctrl]...”, the stylus will act
as a right mouse button when you press the control
key before touching the screen.
3. Click Apply to complete your selection.
Calibrating the Touch Screen
In order to ensure accurate tracking between the stylus
and cursor, you must run the Touch Screen Calibration
Utility before you use the Touch Screen for the first time,
or after you change the display resolution.
To run the calibration utility:
1. On the Start menu, point to Programs (or All
Programs, in Windows XP). Point to Fujitsu Touch
Panel/Compensation Tool. This will open the
Compensation Tool.
2. Adjust the display of your notebook to a comfortable
angle and find the red (+) symbol in the upper-left
corner of the display.
3. Using the stylus, firmly touch the screen directly on
the (+) symbol. Do not lift the tip of the stylus until
the (+) symbol moves to the next location.
4. Repeat step 3 until you have selected a total of twelve
symbols. This is the minimum number of points
necessary to calibrate your touch screen.
17
B
5FH-5961-01EN-00.book Page 18 Monday, April 29, 2002 2:58 PM
LifeBook Notebook P1000 – Section Two
Volume Control
Your Fujitsu LifeBook notebook has multiple volume
controls which interact with each other.
POINT
Any software that contains audio files will also contain
a volume control of its own. If you install an external
audio device that has an independent volume control,
the hardware volume control and the software volume
control will interact with each other. It should be noted
that if you set your software volume to Off, you will
override the external volume control setting.
CONTROLLING THE VOLUME
The volume can be controlled in several different ways:
■
Volume can be set from within the Volume Control on
the Taskbar.
■
Volume can be controlled with the [F8] and [F9]
functions keys. Pressing [F8] repeatedly while holding
[Fn] will decrease the volume of your notebook. Pressing [F9] repeatedly while holding [Fn] will increase
the volume of your notebook.
POINT
There are seventeen levels through which the function
keys cycle.
■
Volume can be controlled by many volume controls
that are set within individual applications.
■
Certain external audio devices you might connect to
your system may have hardware volume controls.
Each source discussed above puts an upper limit on the
volume level that must then be followed by the other
sources.
We recommend that you experiment with the various
volume controls to discover the optimal sound level.
18
B5FH-5961-01EN-00.book Page 19 Monday, April 29, 2002 2:58 PM
3
Getting Started
19
B5FH-5961-01EN-00.book Page 20 Monday, April 29, 2002 2:58 PM
LifeBook P1000 Notebook – Section Three
20
B
5FH-5961-01EN-00.book Page 21 Monday, April 29, 2002 2:58 PM
DC Cable
AC Cable
Figure 3-1 Connecting the AC Adapter
Getting Started
DC Power Jack
AC Adapter
Power Sources
Your Fujitsu LifeBook notebook has four possible power
sources: a primary Lithium ion battery, an optional
high-capacity Lithium ion battery, an AC adapter, or an
optional Auto/Airline adapter.
CONNECTING THE POWER ADAPTERS
The AC adapter or optional Auto/Airline adapter
provides power for operating your notebook and
charging the batteries.
Connecting the AC Adapter
1. Plug the DC cable into the DC power jack
of your LifeBook notebook.
2. Plug the AC adapter into an AC electrical outlet.
(Figure 3-1)
Connecting the Optional Auto/Airline Adapter
1. Plug the DC cable into the DC power jack
on your notebook.
2. Plug the Auto/Airline adapter into the cigarette
lighter of an automobile with the ignition key in
the On or Accessories position.
OR
3. Plug the Auto/Airline adapter into the DC power
jack on an airplane seat.
Switching from AC Adapter Power or the
Auto/Airline Adapter to Battery Power
1. Be sure that you have a charged battery installed.
2. Remove the AC adapter or the Auto/Airline adapter.
POINT
The Lithium ion battery is not charged upon purchase.
Initially, you will need to connect either the AC adapter
or the Auto/Airline adapter to use your notebook.
21
B
5FH-5961-01EN-00.book Page 22 Monday, April 29, 2002 2:58 PM
LifeBook P1000 Notebook – Section Three
Figure 3-2 Opening the Display Panel
Display Panel
Your Fujitsu LifeBook notebook contains a display panel
that is backlit for easier viewing in bright environments
and maintains top resolution through the use of activematrix technology.
OPENING THE DISPLAY PANEL
Lift the display backwards, being careful not to touch the
screen, until it is at a comfortable viewing angle.
(Figure 3-2)
ADJUSTING DISPLAY PANEL BRIGHTNESS
Once you have turned on your LifeBook notebook, you
may want to adjust the brightness level of the screen to a
more comfortable viewing level. There are two ways to
adjust the brightness, by using the keyboard or the
power management utility.
Using the Keyboard
Adjusting the brightness using the keyboard changes the
setting only temporarily.
■
[Fn+F6]: Pressing repeatedly will lower the
brightness of your display.
■
[Fn+F7]: Pressing repeatedly will increase the
brightness of the display.
Using the Power Management Utility (Windows
2000 only)
Adjusting the brightness using the Power Management
changes the setting permanently.
1. Double-click the Battery icon in the lower right
corner of your display. This will open the BatteryAid
Properties dialog box.
2. Select the Power Control tab and adjust your
LCD Backlighting to the desired level.
3. Click OK or Apply to permanently change
the settings.
You may need to readjust the brightness level periodically depending on your operating environment.
POINT
The higher the brightness level, the more power the
notebook will consume and the faster your batteries
will discharge. For maximum battery life, make sure that
the brightness is set as low as possible.
CLOSING THE DISPLAY PANEL
Holding the edge of your display panel, pull it forward
until it is flush with the body of your LifeBook notebook.
22
B
5FH-5961-01EN-00.book Page 23 Monday, April 29, 2002 2:58 PM
Getting Started
Starting Your LifeBook
Notebook
POWER ON
Suspend/Resume/Power On button
The Suspend/Resume/Power On button is used to turn
on your LifeBook notebook from its off state. Once you
have connected your AC adapter or charged the internal
Lithium ion Battery, you can power on your notebook.
(See figure 2-7 on page 9 for location)
POINT
When you turn on your LifeBook notebook be sure you
have a power source. This means that a battery is
installed and charged, or that the AC or Auto/Airline
adapter is connected and has power.
Press the Suspend/Resume/Power On button, which is
located below the display on the right. When you are
done working you can either leave your LifeBook notebook in Suspend mode, (See Standby Mode on page 25
for more information), or you can turn it off. (See Power
Off on page 26 for more information)
When you Power On your LifeBook notebook, it will
perform a Power On Self Test (POST) to check the
internal parts and configuration for correct functionality.
If a fault is found, your LifeBook notebook will emit an
audio warning and/or an error message will be displayed.
(See Power On Self Test Messages on page 47 for more
information) Depending on the nature of the problem,
you may be able to continue by starting the operating
system or by entering the BIOS setup utility and revising
the settings.
After satisfactory completion of the Power On Self Test
(POST), your notebook will load your operating system.
POINT
Never turn off your LifeBook notebook during the
Power On Self Test (POST) or it will cause an error message to be displayed when you turn your LifeBook
notebook on the next time.
Messages on page 47 for more information)
BOOT SEQUENCE
The procedure for starting-up your notebook is termed
the Boot sequence and involves your notebook’s BIOS.
When your LifeBook notebook is first turned on, the
main system memory is empty, and it needs to find
instructions to start up your notebook. This information
(See Power On Self Test
is in the BIOS program. Each time you power up or
restart your notebook, it goes through a boot sequence
which displays a Fujitsu logo until your operating system
is loaded. During booting, your notebook is performing
a standard boot sequence including a Power On Self Test
(POST). When the boot sequence is completed without
a failure and without a request for the BIOS Setup
Utility, the system displays the operating system’s
opening screen.
The boot sequence is executed when:
■
You turn on the power to your LifeBook notebook.
■
You restart your notebook from the Windows
Shut Down dialog box.
■
The software initiates a system restart. Example:
When you install a new application.
■
You reset the system by pressing the three keys
[CTRL+ALT+DEL].
BIOS SETUP UTILITY
The BIOS Setup Utility is a program that sets up the
operating environment for your LifeBook notebook.
Your BIOS is set at the factory for normal operating
conditions, therefore there is no need to set or change
the BIOS’ environment to operate your notebook.
The BIOS Setup Utility configures:
■
Device control feature parameters, such as changing
I/O addresses and boot devices.
■
System Data Security feature parameters, such as
passwords.
Entering the BIOS Setup Utility
To enter the BIOS Setup Utility do the following:
1. Turn on or restart your LifeBook notebook.
2. Press the [F2] key once the Fujitsu logo appears on
the screen. This will open the main menu of the
BIOS Setup Utility with the current settings
displayed.
3. Press the [RIGHT ARROW] or [LEFT ARROW] key
to scroll through the other setup menus to review or
alter the current settings.
BIOS Guide
A guide to your notebook’s BIOS is available online.
Please visit our service and support Web site at
www.fujitsupc.com. Once there, select Support, then
select Notebooks under User’s Guides. Select LifeBook
BIOS Guides from the pull-down menu for your LifeBook series. If you are unsure of your notebook’s BIOS
number, refer to your packing slip.
23
B
5FH-5961-01EN-00.book Page 24 Monday, April 29, 2002 2:58 PM
LifeBook P1000 Notebook – Section Three
BOOTING THE SYSTEM
We strongly recommend that you not attach any external
devices to your system until you have gone through the
initial power on sequence.
When you turn on your LifeBook notebook for the first
time, it will display a Fujitsu logo on the screen. If you
do nothing the system will load the operating system,
and then the Windows Welcome will begin.
Designed to accommodate the needs of many users in
many different countries, Windows needs to be configured the first time you use it. Windows has four parts:
■
Getting Started: You have the opportunity to enter
custom information for your configuration file and
setup your modem so that your LifeBook notebook
will be prepared to dial out.
■
Windows Registration: Easy online registration for
Windows with Microsoft.
■
Windows License Agreement and Final Settings:
You have the opportunity to review the Windows
License Agreement.
■
LifeBook Registration: Register your LifeBook notebook in one of three ways.
POINT
You may click Cancel at any time within this process to
shut down Windows. You may restart this process at
any time in the future, but you must complete it in
order to use your computer.
Getting Started
Read the instructions on the screens carefully and fill in
the information as directed. You will be asked for such
items as the language you wish to use, the country in
which you live, your first and last name, and about how
you dial out from where you will be using your LifeBook
notebook. For the modem settings, enter your current
location information where you will be using your LifeBook notebook. If you are not connected to a phone line
and plan to register at a later time, you may click the
Skip button, and you will go directly to the condition of
use page.
Once you have set up your LifeBook notebook to dial
out, Windows will make a free telephone call to test the
settings. If the call is unsuccessful, you will be returned
to the phone settings page where you may try to fix
them. If you are unable to fix the settings please contact
Fujitsu Service and Support. (See Fujitsu Contact Infor-mation on page 1 for more information) If you would
simply like to move on, and register at a later time, you
may click the Skip button, and you will go directly to the
Condition of Use page.
Windows Registration
If your connection is successful, you will go to a
Registration Confirmation page. Enter the requested
information, then check the box at the bottom to
register your copy of Windows with Micros oft. Once you
have finished, click the Next button to continue.
Final Settings
The first part of your final settings is the Windows End
User License Agreement. Read the agreement carefully.
When you finish reading you must accept or reject the
terms of the agreement and then click on the Next button.
POINTS
■
If you reject the terms of the license agreement you
will be asked to review the license agreement for
information on returning Windows or to shut down
your LifeBook notebook.
■
You cannot use your LifeBook notebook until you
have accepted the License Agreement. If you stop the
process your notebook will return to the beginning of
the Windows Welcome Process, even if you shut your
notebook down and start it up again.
REGISTERING YOUR LIFEBOOK NOTEBOOK
What are the benefits of registering?
You will receive an identification label for your LifeBook
notebook, which, if your notebook is ever lost, may help
in getting it returned to you. You will also receive technical support access and useful product mailings.
How do I register my LifeBook notebook?
There are four ways to register your LifeBook notebook.
Complete the pre-printed registration form and submit
it by either of the following methods:
■
Fax: 1-800-577-9989
■
Mail: Fujitsu PC Corporation
750 139th Ave.
San Leandro, CA 94578
Attn: Warranty Department
You can also register your LifeBook by:
■
Web s it e : www.fujitsupc.com/support
You will need to be set up with an Internet Service
Provider (ISP) to use the last option.
INSTALLING CLICK ME!
The first time you boot up your system, you will see an
icon called Click Me! on the desktop (Windows 2000) or
in the Start folder (Windows XP). When you click the
Click Me! icon, your system will automatically build the
icon tray in the bottom right of the screen. These icons
provide links to utilities that you will frequently access.
24
Loading...
+ 72 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.