Fujitsu Computer Systems Corporation
ExpressCard Hybrid
TV Tuner User’s Guide
This installation guide contains information on installing and using
your ExpressCard Hybrid TV Tuner. We strongly recommend that
you read this guide before installing and using the tuner. Note that
the “Hybrid” terminology refers to the fact that this device supports
both analog and digital inputs (NTSC and ATSC).
Kit Contents
Before you install the TV tuner card, verify that the package contains
the following parts:
• Fujitsu ExpressCard Hybrid TV Tuner
•RF In to SMB Cable
• S-Video In/Composite RCA In 2-in-1 Cable
• ExpressCard TV Tuner Driver CD-ROM
• User Guide (this manual)
ExpressCard Hybrid TV Tuner (above)
S-Video In/Composite In
2-in-1 Cable (left)
Figure 1. Kit Contents
RF In Cable (right)
1
Installing the Driver
Before you can use the TV tuner, you must first install the device
driver. To do so, perform the following steps:
1. Insert the ExpressCard TV Tuner Driver disc into the optical
drive. A Fujitsu Installer screen is displayed after the disc is
inserted.
2. After reading the License Agreement, select [I agree], then
click [Continue].
3. A window will appear containing a list of applications, drivers,
and utilities that are contained on the disc.
4. Select the TV Tuner driver from the list – typically this is the
only component in the list.
5. In cases of certain product models, the video driver may need
to be updated and will be listed in the subcomponents to be
installed. In this case, check off the Video driver component
which may be grayed-out. If the Video driver component is
grayed-out, a message will be displayed to the effect that the
driver is already installed, and it may need to be uninstalled
prior to reinstallation; it is not necessary to manually uninstall
the driver.
6. Click [Install Selected Subsystems] to start the installation.
7. After the driver is installed, click [OK], then click [Yes] when
asked if you want to reboot the system.
2
• Inserting the card in the wrong slot could result
in damage to the card or slot connectors. When
installing the TV tuner card, be sure that you
insert it in the ExpressCard slot. The ExpressCard slot is usually identified by an “EC” icon.
• The illustrations contained in this document
may not accurately reflect the position of your
ExpressCard slot. If you are unsure about which
slot is the ExpressCard slot, refer to your system
user’s guide.
Installing the TV Tuner Card
To install the ExpressCard Hybrid TV Tuner, first be sure you are
familiar with the ExpressCard slot location. If you are unsure, refer
to your system user’s guide.
1. Position the card as shown in Figure 2. The small arrow
should be located on the top of the card.
2. Carefully guide the card into the slot. When it reaches the back
of the slot, push it firmly to ensure that it is seated securely.
ExpressCard slot
Positioning arrow
Figure 2. Inserting the TV Tuner Card
3