Fujitsu LIFEBOOK E734, LIFEBOOK E744, LIFEBOOK E754, lifebook e736, lifebook e746 Operating Manual
Operating Manual
FUJITSU LIFEBOOK E734
FUJITSU LIFEBOOK E744
FUJITSU LIFEBOOK E754
System
Congratulations on your pu
product from Fujitsu.
rchase of an innovative
The latest information about our products, tips, updates etc. can be found
on the Internet at: "
You can find driver updates at: "http://s upport.ts.fujitsu.com /download"
Should you have any technical questions, please contact:
• our Hotline/Service Desk (see the Service Desk list or visit:
"
http://support.ts.fujitsu.com/contact/servicedesk")
• Your sales partner
• Your sales office
We hope you enjoy working with your new Fujitsu system!
http://www.fujitsu.com/fts/"
Published by / Contact address in the EU
chnology Solutions GmbH
Fujitsu Te
Mies-van-der-Rohe-Straße 8
80807 Munich, Germany
www.fujitsu.com/fts/"
http://
"
Copyright
u Technology Solutions GmbH 2014. All rights reserved.
©Fujits
Publication Date
02/2014
Order No.: A26391-K371-Z320-1-7619, edition 1
FUJITSU LIFEBOOK E734
FUJITSU LIFEBOOK E744
FUJITSU LIFEBOOK E754
Operating Manual
Innovative technology 7
Ports and controls 9
Important notes 14
First-time setup of your device 17
Working with the notebook 20
Security functions 51
Connecting external devices 57
Removing and installing components
during servicing 63
Settings in BIOS Setup Utility 71
Troubleshooting and tips 73
Technical data 81
Manufacturer’s notes 83
Index 84
Remarks
Information on the product description meets the design specifications of Fujitsu and
is provided for comparison purposes. Several factors may cause the actual results to
differ. Technical data is subject to change without prior notification. Fujitsu rejects any
responsibility with regard to technical or editorial mistakes or omissions.
Trademarks
Fujitsu, the Fujitsu logo and LIFEBOOK are registered trademarks of Fujitsu Limited
or its subsidiaries in the United States and other countries.
Microsoft and Windows are trademarks or registered trademarks of the Microsoft
Corporation in the United States and/or other countries.
Adobe Reader is a trademark of Adobe Systems Incorporated.
Sony and Memory Stick are registered trademarks of Sony Electronics, Inc.
Made under license from DTS Licensing Limited. DTS and the symbol are reg istere d trademarks and
& DTS Boost is a trademark of DTS, Inc. Product contains software. © DTS, Inc. All rights reserved.
All other trademarks specified here are the property of their respective owners.
Copyright
No part of this publication may be copied, reproduced or translated without
the prior written consent of Fujitsu.
No part of this publication may be saved or transferred by any electronic means
without the written approval of Fujitsu.
Contents
Contents
Innovativetechnology ................................................................. 7
Furtherinformation ...................................................................... 7
Notational conventions .................................................................. 8
Portsand controls ..................................................................... 9
Importantnotes ........................................................................ 14
Safetynotes ............................................................................ 14
Additional safety notes for devices with radio components . . . . . ............................. 14
Energysaving .......................................................................... 15
Energy saving u nder Windows ....................................................... 15
Travelling withyour notebook ............................................................ 15
Beforeyou travel ................................................................... 15
Notebook:transporting ............................................................... 16
Cleaningthe notebook .................................................................. 16
First-time setup o
Unpacking and che
Selectingalocat
Mains adapter con
Switchingonthe
Workingwith thenotebook ............................................................ 20
Statusindicators ........................................................................ 20
Switching on the notebook . . . . ........................................................... 22
Notebook: switching off .................................................................. 22
Keyboard ............................................................................... 23
Virtualnumerickeypad .............................................................. 25
Separate number block . . . ........................................................... 26
Keycombinations ................................................................... 26
Country and keyboard settings ....................................................... 28
Applicationkeys ........................................................................ 28
Touchpad and touchpadbuttons .......................................................... 29
Movingthe pointer .................................................................. 29
Selectingan item .................................................................... 29
Executing commands . . . . . ........................................................... 29
Draggingitems ...................................................................... 30
LCDscreen ............................................................................ 30
Webcam ............................................................................... 31
Rechargeablebattery ................................................................... 32
Charging,caring for andmaintainingthebattery ....................................... 32
Removingand installing thebattery ................................................... 32
Module ................................................................................. 34
Removing a m odule . . . . . . ........................................................... 35
Installing a module .................................................................. 35
Opticaldrive ............................................................................ 36
Handlingdata carriers ............................................................... 36
CD/DVDindicator ................................................................... 36
Insertingor removing adata carrier ................................................... 37
Manual removal (emergency removal) . . . . ............................................ 37
Removing and fittingthe dustremoval cover(ventilationslot cover) ......................... 38
Usingthe power-management features ................................................... 40
fyourdevice .........................................................
ckingthe device ......................................................
ion .....................................................................
necting ...............................................................
device for the first time ..................................................
17
17
18
18
19
Fujitsu 3
Contents
Memorycards .......................................................................... 41
Supportedformats .................................................................. 41
Insertingthe memory card ........................................................... 41
Removingthe memorycard .......................................................... 41
Loudspeakers and microphones . . ........................................................ 42
SIMcard ............................................................................... 42
Insertingthe SIMcard ............................................................... 43
Removingthe SIMcard .............................................................. 44
Wireless LAN/Bluetooth/UMTS/LTE radio components . . . .................................. 45
Switching the wire less components on and off ......................................... 45
Settingup WLANaccess ............................................................ 45
Accessvia UMTS/LTE ............................................................... 46
Ethernetand LAN ....................................................................... 46
Your PortReplicator ..................................................................... 47
PortsonthePortReplicator .......................................................... 47
Connecting the notebook to the Port Replicator . . . . . .................................. 48
Connecting the mains adapter to the Port Replicator . .................................. 49
Switching on the notebook via the port replicator . . . . . .................................. 49
Disconnecting the notebook from the Port Replicator .................................. 50
Securityfunctions ..................................................................... 51
Configuring the fingerprint sensor ........................................................ 51
Usingthe Security Lock ................................................................. 52
Configuringpassword protection inBIOS Setup Utility ...................................... 52
Protecting the BIOS Setup Utility (supervisor and user HDD passwords) . . ............... 53
Password protection for booting of the operating system . .............................. 54
Trusted Platform Module (TPM) (device-dependent) . . . . . .................................. 55
EnablingTPM ....................................................................... 55
DisablingTPM ...................................................................... 55
SmartCard reader ....................................................................... 56
Insertingthe SmartCard ............................................................. 56
Connectingexternal devices ........................................................... 57
Connecting an external monitor . . ........................................................ 58
HDMIport .............................................................................. 59
Connecting USB devices ................................................................ 60
USBportwithchargingfunction (Anytime USB charge) ................................. 61
HowtoremoveUSBdevicescorrectly ................................................ 61
Connecting external audio devices . . . . . . ................................................. 62
Microphone port/Line In . . ............................................................ 62
Headphone port . . . . . ................................................................ 62
Removing and installing co mponents during servicing . . . .............................. 63
Notes on installing and removing boards and components .................................. 63
Preparing to remove components ........................................................ 64
Installingand removing memory expansion ................................................ 64
Removinga cover ................................................................... 65
Removing memory modules . . ........................................................ 65
Installinga memory module .......................................................... 66
Attachingthe cover .................................................................. 66
Removingand installing thehard disk .................................................... 67
Removinga cover ................................................................... 67
Removinga harddisk ............................................................... 68
Installinga hard disk ................................................................. 69
4 Fujitsu
Contents
Attachingthe cover .................................................................. 70
Finishing component removal . ........................................................... 70
Settings in BIOS Setup Utility . . . ....................................................... 71
Startingthe BIOSSetupUtility ........................................................... 71
OperatingBIOS Setup Utility ............................................................. 71
ExitingBIOS SetupUtility ................................................................ 72
Exit Saving Changes - save changes and exit BIO S Setup Utility . . ..................... 72
Exit Discarding Changes – D iscard changes and exit BIOS Setup Ut ility . . . .............. 72
Load Setup Defaults – Copy Standard Entries . ........................................ 72
Discard Changes – Discard changes without exiting the BIOS Setup Utility . .............. 72
Save Changes - save changes without exiting the BIOS Setup Utility . . . . . . .............. 72
Save Changes and Power Off ....................................................... 72
Troubleshooting and tips .............................................................. 73
Helpifproblemsoccur ................................................................... 73
Restoring the hard disk contents under Windows . . ........................................ 74
The notebook’s date or time is incorrect ................................................... 74
Whencertaincharacters are entered onthe keyboard, onlynumeralsarewritten ............. 74
The notebook’s LCD screen remains blank . . . . ............................................ 75
The LCD screen is difficultto read ........................................................ 75
Theexternalmonitor remains blank ...................................................... 75
Theexternalmonitor is blankor theimageisunstable ..................................... 76
The notebook cannot be started . . . ....................................................... 76
The notebook stops working . . ........................................................... 77
The printer does not print . . . . . ........................................................... 77
The radio connection to a network does not work . . ........................................ 77
Acousticwarnings ....................................................................... 78
SmartCard reader is not recogn ised. . . . ................................................... 78
SmartCardPIN forgotten ................................................................ 78
SmartCardlost ......................................................................... 78
Errormessages onthe screen ........................................................... 79
Technical data ......................................................................... 81
LIFEBOOK ............................................................................. 81
Rechargeablebattery ................................................................... 81
Mains adapter .......................................................................... 82
Manufacturer’snotes .................................................................. 83
Disposaland recycling .................................................................. 83
Declarationsof Conformity ............................................................... 83
CEmarking ............................................................................ 83
Index .................................................................................. 84
Fujitsu 5
Contents
6 Fujitsu
Innovative technology
Innovative technology
... and ergonomic design make your device a reliable and convenient companion.
The device boots very quickly, is ready for immediate use and offers a particularly
long operating time because of its high capacity battery.
With the user-friendly "BIOS Setup Utility" you can control your notebook’s hardware and better
protect your system against unauthorised access by using the powerful password properties.
Information on the connections and user componen ts of your notebook
canbefoundin"
Ports and controls", Page 9.
Further information
The Windows drivers for your device can be found on our Internet site.
The factory installation of your device does not support any other operating
system. Fujitsu Technology Solutions accepts no liability whatsoever
if any other operating system is used.
Software oriented components of the se instructions refer to Microsoft products,
if they come within the scope of the delivery.
If you install other software products, pay attention to the operating
instructions of the manufacturer.
Fujitsu 7
Innovative technology
Notational conventions
Pay particular attention to text marked with this symbol. Failure to observe
these warnings could pose a risk to h ealth, damage the device or lead
to loss of data. The warra nty will be invalidated if the device becomes
defective throu gh failure to observe these warnings.
Indicates important informa
tion for the proper use of the device.
►
This font
This font
This font
"This font"
Key
This font
Indicates an activity that must be performed
Indicates a result
indicates data entered
the command line, e.g.
start a program (star
indicates information that is displayed on the screen by a program, e.g.:
Installation is complete.
Indicates
• terms and texts used in a software interface, e.g.: Click on Save
• names of programs or files, e.g. Windows or setup.exe.
Indicates
• cross-references to another section, e.g. "Safety information"
• cross-references to an external source, e.g. a web address: For more
information, go to "
• Names of CDs, DVDs and titles or designations for other materials,
e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual
indicates a key on the keyboard, e.g:
indicates terms and texts that are emphasised or highlighted, e.g.: Do
not switch off the device
using the keyboard in a program dialogue or at
your password (Name123) or a command used to
t.exe)
http://www.fujitsu.com/fts/"
F10
8 Fujitsu
Ports and controls
Ports and controls
This chapte r presents the individual hardware components of your device. It gives
an overview of the indicators and ports of the device. Please familiarise yourself with
these components before you start to work with the device.
Front
LIFEBOOK E734:
2
1
3
1
7
11
1 = Microphone (optional)
2 = WebCam (optional)
3 = WebCam LED (optional)
4 = Touchpad
5 = Loudspeakers
6 = TouchStick (optional)
5
6
4
8
7
9
5
10
7 = Status indicators
8 = Application keys
9 = ON/OFF switch
10 = Fingerprint sensor (optional)
11 = Touchpad buttons
Fujitsu 9
Ports and controls
LIFEBOOK E744:
1
2
3
1
5
758
9
6
4
7
11
10
1 = Microphone (optional)
2 = WebCam (optional)
3 = WebCam LED (optional)
4 = Touchpad
5 = Loudspeakers
6 = TouchStick (optional)
7 = Status indicators
8 = Application keys
9 = ON/OFF switch
10 = Fingerprint sensor (optional)
11 = To u chpad buttons
10 Fujitsu
LIFEBOOK E754:
Ports and controls
1
2
3
1
5
8
7
6
4
9
5
7
11
10
1 = Microphone (opt
2 = WebCam (optional)
3 = WebCam LED (op
4 = Touchpad
5 = Loudspeaker
6 = TouchStick (optional)
Left side
ional)
tional)
s
1
1 = DC input connector (DC IN)
2 = Ventilation slots
3 = LAN port
4 = Monitor port (VGA)
7 = Status indicato
8 = Application keys
9 = ON/OFF switch
10 = Fingerprint sensor (optional)
11 = Touchpad but
2
3 4 5 6 7 8
5 = DisplayPort
6 = USB port 3.0
7 = SmartCard reader (optional)
8 = Memory card slot
rs
tons
Fujitsu 11
Ports and controls
Right side
1 2
3
4
1 = Headphone port
2 = Microphone port
3 = USB port 3.0
4 = USB 3.0 port with charging function
(Anytime USB charge)
Rear
1 2
5 6
5 = Module b ay with optical drive
6 = Security Lock device
1 = USB port 2.0 (LIFEBOOK E744/E754 only) 2 = HDMI port (LIFEBOOK E754 only)
12 Fujitsu
Bottom
Ports and controls
7
1 = Module release
2 = Battery release
3 = Port replicator port
4 = Battery com partment (SIM card
under the battery)
1
2
3
4
2
5
6
5 = Ventilation slot cover
6 = Memory service compartment
7 = Hard disk service compartment
Fujitsu 13
Important notes
Important notes
ImportantnotesNotes
Safety notes
SafetynotesNotes
This chapter contains essential safety information which must be followed
when working with your notebook. Other notes also provide useful information
which will help you with your n otebook.
Please follow the safety notes provided in the "Safety/Regulations" manual
as well as the safety notes given below.
Please pay special attention to the sections in the manual marked
with the symbol on the left.
When connecting and disconnecting cables, observe the relevant
notes in this operating manual.
Read the information on the ambient con ditions in the "
Page 81 and "First-time setup of your device", Page 17 before preparing your
notebook for use and switching it on for the first time.
When cleaning the device, please observe the relevant notes in the
section "
Pay attention to the additional safety notes for devices with radio components
provided in the "Safety/Regulations" manual.
Please refer to the notes in the chapter "
components during servicing", Page 63.
Cleaning the notebook", Page 16.
Technical data",
Removing and installing
This notebook
equipment. I
please conta
complies with the relevant safety regulations for data processing
f y ou have questions about using your notebook in a particular area,
ct your sales outlet or our Hotline/Service Desk.
Additional safety notes for devices with radio components
Radiocomponent:WirelessLAN:Bluetooth,safetynotes
If a radio component (Wireless LAN, Bluetooth, UMTS, LTE) is incorporated into your notebook,
you must be sure to observe the following safety notes when using your notebook:
• Switch off the radio components when you are in an aircra ft or driving in a car.
• Switch off the radio components when y ou are in a hospital, an operating room or near a medical
electronics system. The transmitted radio waves can impair the operation of medical devices.
• Switch off the radio components when you let the device get near flammable
gases or into hazardous environments (e.g. petrol station, paintshops), as the
transmitted radio waves can cause an explosion or a fire.
For information on how to switch radio components on and off, see chapter
Switching the wirele ss components on and off", Pa ge 45.
"
14 Fujitsu
Important notes
Energy saving
NotesEnergyEnergysaving
Switch the notebook off when it is not in use. Switch off external, connected device s if you
are not using them. If you use the energy saving functions, the noteboo k uses less energy.
You will then be able to work for longer before having to recharge the battery.
Energy efficiency is increased and the environmental impact is reduced.
You s ave money while protecting the environme nt.
Energy saving under Windows
► Make use of the power management features (see ""Using the power-management features",
Page 40").
Travelling with you
MobileoperationNotesTran sportationNotebook
Please observe the points listed below when travelling with your notebook.
r notebook
Before you travel
► Back up important data stored on your hard disk.
NotebookTravel,notebook
► Switch off the radio component for data se curity reasons. With data traffic via a wireless
connection, it is also possible fo r unauthorised third parties to receive data.
Information on activating data encryption is provided in the documentation
for your radio component.
► If you wish to use your notebook during a flight, first check with the flight
attendants if it is OK to do so.
When travelling in other countries
► If you are travelling abroad , check that the mains adapter can be operated with the
local mains voltage. If this is not the case, obtain the appropriate mains adapter for
your notebook. D o not use any other voltage converter!
► Check whether the local mains voltage and the power cable are compatible. If this is
not the case, buy a power cable that matches the local conditions.
► Enquire with the corresponding government office of the country you will be
travelling in as to whether you may operate the radio component integrated in
your notebook there (see also "
CE marking", Page 83).
Fujitsu 15
Important notes
Notebook: t ranspo rting
Protect the notebook from severe shocks and extreme temperatures
(e.g. direct sunlight in a car).
► If your device has an optical drive, remove all data media (e.g. CD , DVD) from the drives.
TransportationNotebook
► Switch the notebook off.
► Unplug the mains adapter and all external devices from the power socket.
► Disconnect the mains adapter cable and the data cables for all external devices.
► Close the LCD screen.
► To protect against damaging jolts and bumps, use a notebook carrying
case to transport your notebook.
Cleaning the notebo
ok
Do not clean any interior parts yourself; leave this job to a service technician.
Only use cleaning products designed for computers. Normal household
cleaners and polishes can damage the markings on the keyboard and the
device, the paintwork or the notebook itself.
Ensure that no liquid enters the notebook.
The LCD screen very sensitive to scratches. Only clean the display
surface with a very soft, slightly damp cloth.
► Switch the notebook off.
display
CleaningNotesNotebookKeyboardTouchpadLCDscreenCr ystalView
► In order to prevent accidentially switching the device on, remove the power cable from the mains
adaptor and remove the battery (see "
The surface c
been moiste
an be cleaned with a d ry cloth. If particularly dirty, use a cloth which has
ned in mild domestic detergent and then carefully wrung out.
Removing and installing the battery", Page 32).
To clean the keyboard and the touchpad, if available, you can use disinfectant wipes.
Ensure that no liquid enters the device.
16 Fujitsu
First-time setup of your device
First-time setup of your devic
First-timesetu pGettingstarted
On delivery, the battery can be found in the battery compartment or in the accessories kit.
The battery must be charged if you want to operate your device using the battery.
When used on the move, the built-in battery pro vides the device with the necessary po wer. You
can increase the operating time by using the available energy-saving functions.
For instructions on how to connect exte rnal devices (e.g. mouse, printer) to your
device, please refer to the operating manual for your device.
Unpacking and
► Unpack all the individual parts.
► Check your
Please read the chapter "Important notes", Page 14.
If your device is equipped with a Windows operating system, the necessary
hardware drivers and supplied software are already pre-installed.
Beforeyouswitchonthedeviceforthefirst time, connect it to the mains voltage
using the mains adapter, see "
adapter must be connected during the entire installation process.
A system test is performed when your device is first switched on. Various messages
can appear. The display may remain dark for a short time o r may flicker.
Please follow the instructions on the screen.
NEVER switch off your device during the first-time setup process.
Mains adapter connecting", Page 18.Themains
checking the device
Should you discover any damage that occurred during transportation,
notify your local sales outlet immediately!
PackagingTransport
device for any visible damage which may have occurred during tra nsp ortation.
e
You m a y n e
Fujitsu 17
ed the packaging in the future, if you need to transport your device.
First-time setup of your device
Selecting a location
SelectingalocationDeviceM ainsadapter
Select a suitable location for the device before setting it up. Follow
the instructions below when doing so:
• Never place the device or the mains adapter on a heat-sensitive surface.
The surface could be dama ged as a result.
• Never place the device on a s oft surface (e. g. carpeting, upholstered furniture,
bed). This can block the air vents and cause overheating and da mage.
• The underside of the device heats up during normal operation. Prolonged contact
with the skin may become unpleasant or even result in burns.
• Place the device on a stable, flat, non-slippery surface. Please note that the
rubber feet of the device may mark certain types of delicate surfaces.
• Keep other objects at least 100 mm / 3.9 7" away from the device and
its mains adapter to ensure adequate ventilation.
• Never cover the ventilation slots of the device.
• Do not expose the device to extreme environmental conditions. Protect
the device from dust, humidity, and heat.
Mains adapter connecting
PreparingforoperationMainsadapter
Observe the safety notes in the enclosed "Safety/Re gulations" manual.
The supplied power cable conforms to the requirements of the country in
which you purchased your device. Make sure that the power cable is approved
for use in the country in which you intend to use it.
When an approved 2 -pin mains adapter is connected, you may feel a slight tingling
when you touch the top of the aluminium housing. The combination of a mains adapter
without protective earth and metallic hous ing parts ca use s a very weak e lectrical
current. This effect is harmless. The device meets all relevan t safety standards.
► Connect the power cable (1) to the
mains adapter.
► Plug the mains cable (2) into a mains outlet.
► Connect the mains adapter cable (3) to
3
the DC jack (DC IN) of the device.
2
1
18 Fujitsu
First-time setup of your device
Switching on the device for the first time
Switchingonforthefirsttime
When you switch on the device for the first time, the supplied software is
installed and configured. Because this procedure must n ot be interrupted,
you should set aside enough time for it to be fully completed and connect
the device to the mains using the mains adapter.
During the installation process, DO NOT restart the device unless
you are requested to do so!
To make it easier to use yo
is pre-installed on the
ur device for the first time, the operating system
hard disk.
► Switch on your device.
► During installation, follow the instructions on screen.
If a Window s operating system is installed on your device, you will find more
information on the system and drivers, help programmes, updates, manuals etc. on
the device or on the Internet under "
http://www.fujitsu.com/fts/support/".
You can find information and help on the Windows operating system functions
on the Internet at "
http://windows.microsoft.com".
Fujitsu 19
Working with the notebook
Working with the notebook
Notebook,operationNotebook
This chapter describes the basics for operating your notebook. Please read the chapter
entitled "
devices such as a mouse and a printer to the notebook.
Status indicators
Statusindicators
The status indicators provide information about the status of the power supply,
the drives and the keyboard functions.
Connecting external devices", Page 57 for instructions on how to connect
Please refer to the notes in "Important notes", Page 1 4.
Key Description
Power-on
StandbyindicatorPower-onindicator
• Indicato
indicator/Standby
r is illuminated: The notebook is switched o n.
• Indicator flashe s: The notebook is in standby mode.
• Indicat
Batter
• Indica
or is off: The notebook is switched off.
y indicator
tor is illuminated (green): The battery is charged to between 50% and
100% of
its maximum capacity.
• The indicator lights up orange: The battery is charged to between 13% and
49% of its maximum capacity.
•Thei
ndicator lights up re d: The battery is charged to between 0% and 12% of
aximum capacity.
its m
• Indicator flashes red: An error has occured.
20 Fujitsu
Key Description
Battery charging indicator (Battery 1/Battery 2)/Power supply
The state of charge of the battery is shown by the battery indicator.
• Indicator is illuminated (green): The battery is charged or no battery has been
inserted.
• The indicator lights up orange: the mains adapter is connected and the battery
is being charged.
• Indicator flashes orange: the mains adapter is connected but the battery cannot
be charged as the battery is too hot or cold for charging. The charging process
is continued as soon as the battery reaches a permissible temperature again.
• Indicator flashes red: An error has occured.
• The indicator is not illuminated: the mains adapter is not connected.
tor
Batterystatusindica
BatterysymbolBatteryindicator
Drive indicator
DriveIndicator
Indicator is illuminated: One of the drives (e.g. hard disk, CD/DVD) is being
accessed.
Radio components indicator
• Indicator is illuminated: The wireless components are switched on.
• Indicator is off: The wireless compon ents are switched off.
Num Lock indicator
IndicatorNum Lock
Indicator is illuminated: The
keypad is activated. You can output the characters indicated on the upper right of
the keys.
Caps Lock indic
IndicatorCap sLock
Indicator is i
you type will a
printedonthe
Scroll Lock indicator
IndicatorScrollLock
Indicator is illuminated: the key combinationFn+
effect that this key has varies between applications.
Energy saving functions indicator
• Indicator is illuminated: None of the energy saving functions have been
activated.
• The indicator is not illuminated: The energy saving functions have been
deactivated.
Working w ith the notebook
Num
key has been pressed. The virtual numerical
ator
lluminated: The Caps Lock key has been pressed. All the characters
ppear in upper case. In the case of overlay keys, the character
upper left of the key will appear when that key is pressed.
Scr
has been pressed. The
Fujitsu 21
Working with the notebook
Switching on the notebook
► Open the LCD screen.
Switchingon
► Press the ON/OF F switch for about one
second to switch the notebook on.
The power-on indicator
is lit.
Notebook: switching off
Back up your data and close all applications before you switch off your
device. Otherwise data might be lo st.
► Shut down the operating system correctly.
Notebook
► If the notebook is not switched off
automatically, press the O N/ OFF switch
for approx. five seconds.
► Close the LCD screen.
22 Fujitsu
Keyboard
KeyboardNumerickeypadN umerickeypadButtons
The keyboard of your notebook is subject to continuou s wear through normal
use. The k ey markings are especially prone to wear. The key markings are
liable to wear away over the life of the notebook.
Working w ith the notebook
The keyboard has been desig
Some enhanced keyboard fun
The following descriptio
are described in the relev
The figure below shows how
The example applies when
The illustrations show
n of keys refers to Windows. Additional functions supported by the keys
ant manuals supplied with your application programs.
the Caps Lock key has not been activated.
=
+
0
=
0
ned to provide all the functions of an enhanced keyboard.
ctions are map ped with key combinations.
to access the different characters on keys with ove rlaid functions.
n below may differ from your actual device.
Num
}
}
=
0
=
}
0
+
=
0
}
}
Alt Gr
Fujitsu 23
Working with the notebook
Key Description
Backspace key
The Backspace key deletes the character to the left of the cursor.
BackspaceBackspace
Tab key
The Tab key moves the c ursor to
Tabkey
the next tab stop.
Enter key (return)
The Enter key terminates
is executed wh en you pres
EnterkeyReturnEnterLinefeed
a command line. The command you have entered
s this k ey.
Caps Lock key
The Caps Lock key activate s the Caps Lock mode, and the correspon ding
icon is displayed in the Windows information area. In Caps Lock mode, all
of the characters you type appear in upper case. In the case of overlay
keys, the chara cter printed on the upper left of the key will appear when
that key is pressed. To cancel the Caps Lock function, simply press the
Caps Lock key again.
ShiftkeyC apsLock
Shift key
The Shift key ca
keys, the chara
keyispressed.
ShiftkeyShif t
uses uppercase characters to appear. In the case of overlay
cter printed on the upper left of the key appears when that
Fn button
Fn
The
"
Key combina
Fnkey
key enabl
es the special functions indicated on overlay keys (see
tions", Page 26).
Cursor keys
The cursor
left, or ri
CursorkeysCursorcontrolkeys
keys move the cursor in the direction of the arrow, i.e. up, down,
ght.
Windows key
The Windows key switches between the start screen and the last used
application.
Windowskey
Menu key
The Menu key opens the m enu for the active application.
24 Fujitsu
Loading...