Fujitsu LifeBook E7010 User's Guide

Fujitsu Limited has made every effort to ensure the accuracy and completeness of this document. However, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes.

LifeBook is a trademark of Fujitsu Limited. Microsoft, Windows, MS, MS-DOS, and Windows NT are registered trademarks of the Microsoft Corporation of the United States in the United States and other countries. Intel is a registered trademark of the Intel Corporation of the United States. Celeron is a trademark of the Intel Corporation of the United States. ATI is registered trademark of ATI Technologies INC. Macrovision :-

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Re verse engineering or disassembly is prohibited. Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, 4,819,098 and 4,907,093 licensed for limited viewing uses only.

Dolby :-

Manufactured under license from Dolby Laboratories. "DOLBY", "PRO LOGIC ," and the double-D symbol are trademarks

of Dolby Laboratories. Copyrights 1992-1999 Dolby Laboratories, All rights reserved. Phoenix is a registered trademark of Phoenix Technologies Corporation of the United States. K56flex is a trademark of Rockwell International Corporation and Lucent Technologies Corporation. Other product names are trademarks or registered trademarks of their respective companies. Other products are copyrighted by their companies. Copyright© 1981-1999 Microsoft Corporation, All rights reserved. Copyright© 1999 Phoenix Technologies, Ltd., All rights reserved. All other products are trademarks or registered trademarks of their respective companies. Explanations of the adjustments for the track pad cursor control are taken in part from the ALPS GlidePoint Driver User’s Guide, copyright by LCS/Telegraphics in 1996.

© Copyright 2002 Fujitsu Limited. All rights reserved. No part of this publication may be copied, reproduced, or translated, without the prior written consent of Fujitsu Limited. No part of this publication may be stored or transmitted in any electronic form without the written consent of Fujitsu Limited.

Operations are subject to the following two conditions: (1) This device may not be allowed to cause harmful interference, (2) This device must accept any interference received, including interference that may cause undesired operation.

Website : www.fujitsu-pc-asia.com

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions carefully. Save these instructions for future reference.

2. Follow all warnings and instructions marked on the product.

3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners . Use a damp cloth for cleaning.

4. Do not use this product near water.

5. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product.

6. Slots and openings in the cabinet and the back or bottom are provided for v entilation; to ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should nev er be placed near or over a r adiator or heat register, or in a b uiltin installation unless proper ventilation is provided.

7. This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.

8. This product is equipped with a 3-wire grounding-type plug, a plug having a third (grounding) pin. This will only plug into a grounding-type power outlet. This is a safety f eature. If y ou are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the purpose of the grounding-type plug.

9. Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord.

10. If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed 15 amperes.

11. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points that could result in a fire or electric shock. Never spill liquid of any kind on the product.

12. Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.

13. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the product. c. If the product has been exposed to rain or water. d. If the product does not operate normally when the operating instructions are followed. Adjust

only those controls that are covered by the operating instructions since improper adjustment of other controls may result in damage and will often require extensive work by a qualified tech-

nician to restore the product to normal condition. e. If the product has been dropped or the cabinet has been damaged. f. If the product exhibits a distinct change in performance, indicating a need for service.

14. CAUTION. When replacing the battery, be sure to install it with the polarities in the correct posi-

tion. There is a danger of explosion if the battery is replaced with an incorrect type or is mistreated. Do not recharge, disassemble or dispose of in fire. Replace only with the same or equivalent type recommeded by the manufacturer. Dispose of the used battery according to the manufacturer’s instructions.

15. Use only the proper type of power supply cord set (provided in your accessories box) for this unit. It should be a detachable type: UL listed/CSA certified, BS1363,ASTA,SS145 certified, rated 10A 250V minimum, VDE approved or its equivalent. Maximum length is 15 feet (4.6 meters).

High Safety Required Use

This Product is designed, developed and manufactured as contemplated for general use, including without limitation, general office use, personal use, household use and ordinary industrial use, but is not designed,developed and manufactured as contemplated for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could lead directly to death, personal injury,se v ere ph ysical damage or other loss (hereinafter ‘High Safety Required Use’), including without limitation, nuclear power reactioncore control in nuclear atomic facility, airplane automatic aircraft flight control, air traffic control, operation control in mass transport control system,medical instrument for life support system, missile launching control in weapon system. You shall not use this Product without securing the sufficient safety required for the High Safety Required Use.

iii

Data Storage Media

and Customer Responsibilities

The only effective protection for the data stored in a computer, such as on a hard disk, is for you, Purchaser to regularly back up the data. Fujitsu and its affiliates, suppliers, service providers and resellers shall not be responsible for any software prog rams, data or other inf ormation stored or used on any media or part of any Product returned to Fujitsu or its service providers for Warranty Service or other repair, including but not limited to the costs of recovering such programs, data or other information. It is solely your responsibility as the Purchaser to bac k up an y softw are progr ams, data, or information stored on any storage media or any part of a Product returned for W arranty Service or repair to the designated service centers.

AUSTRALIAN WARNINGS

WARNING

FOR SAFETY REASONS, ONLY CONNECT EQUIPMENT WITH A TELECOMMUNICATIONS COMPLIANCE LABEL. THIS INCLUDES CUSTOMER EQUIPMENT PREVIOUSLY LABELLED PERMITTED OR CERTIFIED .

Connection of Non Certified/Approved peripherals may result in the equipment operating outside the Australian EMI Standards.

Modems connected to the Australian telecommunications network must be operated in accordance with the Labelling Notice. This modem has been specifically configured to ensure compliance with the ACA Standards . Do not adjust your modem or software outside the values indicated below. To do so would result in your modem being operated in a non-compliant manner.

Call Attempts/Retries:

Applications software shall be configured so that no more than 3 attempts are made to establish a connection to a given number (Note: if the modem can detect service tones, up to 10 attempts can be made). If the call sequence is unsuccessful, there shall be a delay of at least 30 minutes before attempting to call the number again.

Failure to set the modem, and any application software used with the modem, to the values shown above will result in the modem being operated in a non-compliant manner. Consequently, this would be in violation of the Labelling Notice for this equipment, and the Telecommunications Act 1997 prescribes penalties for the connection of non-compliant equipment.

NEW ZEALAND WARNINGS

The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom’s network services.

This equipment is not capable under all operating conditions of correct operation at the higher speeds for which it is designed. 56 KBPS connections are likely to be restricted to lower bit rates when connected to some PSTN implementations. Telecom will accept no responsibility should difficulties arise in such circumstances.

Immediately disconnect this equipment should it become physically damaged, and arrange for its disposal or repair.

This equipment shall not be used in any manner, which could constitute a nuisance to other Telecom customers.

This equipment shall not be set to make automatic calls to the Telecom “111” Emergency Service. This device is equipped with pulse dialing while the New Zealand standard is DTMF tone dialing. There is no guarantee that Telecom lines will always continue to support pulse dialing. It is strongly recommended that pulse dialing is not used.

Some parameters required for compliance with Telecom’s Telepermit requirements are dependent on the equipment (PC) associated with this device. The associated equipment shall be set to operate within the following limits for compliance with Telecom’s Specifications:

For repeat calls to the same number.

There shall be no more than 10 call attempts to the same number within any 30 minute period for any single manual call initiation, and The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next attempt.

For Automatic calls to different numbers.

The equipment shall go on-hook for a period of not less than 5 seconds between the end of one attempt and the beginning of the next attempt.

For Automatically answered Incoming Calls

Incoming calls shall be answered between 3 and 30 seconds from the start of the ringing.

For correct operation, the total of the RNs of all devices connected to a single line at anytime should not exceed 5. The RN of this Equipment is 0.5.

WARNING Connection of Non Certified/Approved peripherals may result in the equipment operating

outside the New Zealand EMI Standards.

Note: Modem setting in Windows 98 / Windows Me

The default modem setting in Windo ws 98 / Windows Me operating system is United States of America. If you are residing in Australia or New Zealand, please choose the appropriate country where you are located.

Dial type must be set to Tone Dialing if you are either in Australia or New Zealand. Please see below instruction for quick modem setup.

A. If you are located in Australia

1. Go to Control panel, select modem icon.

2. Choose Australia in “What country/region are you in now?”

3. Select Phone system as “Tone Dialing”

4. Close

B. If you are located in New Zealand

1. Go to Control panel, select modem icon.

2. Choose New Zealand in “What country/ region are you in now?”

3. Select Phone system as “Tone Dialing”

4. Close

vii

Note: Modem setting in Windows XP

A. If you are located in Australia

1. Click Start select Control panel select "Phone and Modem Options".

2. Double click New Location.

3. Choose "Australia" in Country/region pull down menu bar.

4. Select Phone system as “Tone Dialing”.

5. Click OK and Apply.

B. If you are located in New Zealand

1. Click start select Control panel select "Phone and Modem Options".

2. Double click New Location.

3. Choose "New Zealand" in Country/region pull down menu bar.

4. Select Phone system as “Tone Dialing”.

5. Click OK and Apply.

Note:

The screens and illustrations shown in this examples may slightly vary depending on the operating environment that you have installed.

viii

NOTATION IN THIS DOCUMENT

Warnings

This manual uses a variety of icons as visual marks so that you can use this computer safely and correctly and avoid damage and danger to yourself and to others . These icons and their meanings are as follows. Please learn these icons bef ore reading this manual. Learning these icons will be useful for understanding this manual.

Icon Meaning

WARNING

CAUTION

The symbols below are used together with the icons above to indicate what type of danger or damage is involved.

Symbol Meaning

Incorrect handling or ignoring this warning can cause a dangerous situation that could result in death or severe injury.

Incorrect handling or ignoring this warning can cause a dangerous situation that could result in moderate or minor injury or could result in equipment damage.

The symbol indicates a w arning or caution. The symbol inside the indicates the concrete nature of the warning. (The example on the left is a caution for electric shock.)

The circle and slash indicates prohibited behavior. The symbol inside the circle indicates the concrete nature of the prohibition. (The example on the left indicates that disassembly is prohibited.)

The indicates instructions that must be followed. The symbol inside indicates the concrete nature of those instructions. (The example on the left tells you to unplug the power plug from the socket.)

Key notation and operation methods

Explanations of key operations do not show all the characters on the keyboard. Instead they indicate just the keys necessary to the explanation as follows. Examples: [Ctrl] key, [Enter] key, [ → ] key When multiple keys are to be pressed at the same time, this is indicated b y connecting them with [+]. Examples: [Ctrl] + [F3] keys; [Shift] + [ ↑ ] key

Screen examples

The screens shown in this manual are examples. Please understand that the file names and screens you use may be different.

Notation in text

Here is what symbols in text mean.

Symbol Meaning

Critical Points

Indicates a point necessary for correctly operating the hardware or software.

Gives the meaning and brief explaination of a term.

Column

→ Indicates the page to see elsewhere in this manual.

Command input (key input)

Within the text of this manual, command input (giving commands to the computer by pressing keys) is indicated as follows.

Example:

In the position indicated in the example above by the ↑, the space left between the characters indicates that a space needs to be left in the entry by pressing the space bar (the long key with nothing written on it at the center of the front of the keyboard). Commands are written in this manual as lowercase latin letters, but uppercase letters may be used.

Product names

The following product names are abbreviated as follows in this manual. “Microsoft® Windows XP® operating system” is written as “Windows XP”.

“Microsoft® Windows® 2000 operating system” is written as “Windows 2000”. “Microsoft® Millennium® Edition operating system” is written as “Windows Me”. “Microsoft® Windows® 98 operating system” is written as “Windows 98”. “Microsoft® MS-DOS® operating system Version 6.2/V” is written as “MS-DOS”. “Microsoft® Windows® operating system Version 3.1” is written as “Windows 3.1”. “Microsoft® Windows NT® Server network operating system V ersion 3.5” and “Microsoft® Windows NT® Workstation operating system Version 3.5” are both written as “Windows NT 3.5”. “Microsoft® Windows NT® Server network operating system V ersion 3.51” and “Microsoft® Windows NT® Workstation and NT Server Version 4.0” are both written as “Windows NT 4.0”. “Windows NT 3.51” and “Windows NT 4.0” are both written as Windows NT. “Fujitsu LifeBook” is written as “this computer” or “the computer main unit”.

dir c:

↑

Configuration of this Manual

SECTION 1

This section explains basic operations and basic items for using this computer, including the names of the parts and their functions, Flat Point Operations and battery operation.

SECTION 2

This section explains installation of options for this computer.

SECTION 3

This section explains what to do when trouble occurs with this computer and when messages are displayed. Read this section as the necessity arises.

SECTION 1

SECTION 2

SECTION 3

CONTENTS

SECTION 1

1. Names of the Parts and their Functions .............................2

2. Status LCDs .........................................................................12

SECTION 2

1. Before Installing Peripheral Equipment ............................16

2. Battery ..................................................................................18

3. PC Cards .............................................................................. 25

4. Memory.................................................................................29

5. Mobile Multi-Bay ..................................................................33

6. Numeric Keypad ..................................................................36

7. Printers .................................................................................37

8. External Displays ................................................................39

Front of Computer ............................................................................... 2

Right Side of Computer ....................................................................... 5

Left Side of Computer ......................................................................... 6

Rear Panel........................................................................................... 8

Bottom of Computer .......................................................................... 10

Port Replicator................................................................................... 11

Peripheral Equipment That Can Be Used.......................................... 16

Cautions for Handling........................................................................17

Charging the Battery ......................................................................... 18

Running This Computer on the Battery ............................................. 19

Checking the Remaining Battery Capacity........................................20

Low Battery State .............................................................................. 21

Cautions for Handling........................................................................22

Replacing the Battery Pack ............................................................... 23

Cautions on Handling ........................................................................ 25

Loading PC Cards ............................................................................. 25

Removing PC Cards.......................................................................... 26

Installing/Removing Memory ............................................................. 29

Cautions on Handling ........................................................................ 33

Replacing a Mobile Multi-Bay Unit..................................................... 34

Connection ........................................................................................ 36

Connection ........................................................................................ 37

Connections ...................................................................................... 39

xii

SECTION 3

9. Pointing Devices..................................................................41

Touch Pad..........................................................................................41

Touch Pad Usage .............................................................................. 42

Mouse Usage .................................................................................... 44

PS/2 Mouse.......................................................................................46

USB Mouse ....................................................................................... 46

10. Keyboard ..............................................................................48

Numeric Keypad Mode......................................................................48

Function Keys.................................................................................... 49

11. CDs .......................................................................................51

Cautions on Handling ........................................................................ 51

Loading/Removing CDs .................................................................... 52

12. Diskettes .............................................................................. 54

Cautions for Handling........................................................................54

Loading/Removing Diskettes............................................................. 54

13. Caring for the Hardware ..................................................... 56

Caring for the Computer....................................................................56

Caring for the Floppy Disk Drive........................................................ 56

1. Security ................................................................................58

Security Button .................................................................................. 58

2. LifeBook Security/Application Panel .................................59

Setting up your LifeBook Security Panel ........................................... 59

Passwords.........................................................................................59

Operating your LifeBook Security/Application Panel ......................... 60

Precautions ....................................................................................... 61

Uninstalling the Security Panel Application Software........................61

Configuring your LifeBook Application Panel .................................... 63

Configure your E-mail Account Settings............................................ 66

Desktop Control Panel....................................................................... 71

3. When This Happens ............................................................ 73

4. Care and Maintenance ........................................................77

5. Glossary ...............................................................................82

xiii

SECTIONSECTION

SECTION

SECTIONSECTION

SECTION

SECTIONSECTION

This chapter gives the names of the parts and their functions.

SECTION 1

Names of the Parts and their Functions

Front of Computer

1. Latch

This latch locks so that the LCD display does not open accidentally. To open the LCD display, slide the latch to the right to unlock it.

2. LCD display

This is the display screen for this computer.

Critical Point

Characteristics of the LCD display Please understand that the following performance is characteristic of the LCD display and

does not indicate a problem with the display.

• This computer’s TFT color LCD display uses high-level technology and comprises over

2.35 million pixels (dots) (for a resolution of 1024 x 768). Therefore, there may be a few dots that never light up or never go out.

• Due to the manufacturing process, there may be some difference in the colors among different units of this model and temperature change may result in a certain unevenness of the color on a single computer’s screen.

3. Closed Cover Switch

This switch puts the computer on standby and makes it resume and switches the LCD display backlight Off/On when the cover is closed/opened.

4. Status display LCD

Shows the status of this computer.

5. LifeBook Security/Application Panel

The LifeBook Security/Application Panel provide hardware security and one-touch application launch capability.

6. Infrared Mouse Receiver

This IR Mouse Receiver allows you to use a Fujitsu IR mouse.

7. Power button

This button switches On the power for this computer and puts the computer on standby and makes it resume.

8. Keyboard

The keyboard is used to input text and give commands to the computer.

9. Touch pad

Serves as the mouse. When you install the “Alps Pointing Device Driver” that comes with this computer, you can install the center scroll button. When you press the center scroll button, the screen scrolls up/down.

SECTION 1

Critical Point

You can not scroll with this scroll button in some applications.

10. Speakers

Outputs the sound for this computer.

CAUTION

HEARING LOSS

T urn the volume on the computer all the wa y down b y pressing the “Fn” + “F8” k eys when connecting to the mic jack or headphone jack. Connecting with the volume up can damage audio equipment or cause irritating noise that has a negative impact on your hearing.

11. IEEE 1394 Port

The 1394 port allows you to connect devices that are compliant with IEEE standard 1394.

12. Microphone Jack

This is the jack for connecting any ordinary 3.5-mm miniplug microphone and recording (in monaural). Note that certain types of ordinary microphones (dynamic microphones) will not work correctly with this jack. Please check before purchasing a microphone.

13. Headphone jack/Optical digital audio output terminal

This is the jack for connecting any ordinary 3.5-mm miniplug headphone. Note that some headphones have plugs shaped in such a wa y that they can not be used with this jack. Chec k this before purchasing a headphone. This terminal can also be used as an optical digital output terminal to connect the computer to the optical digital input terminal of an MD player, etc. (with a

3.5-mm fiber-optic mini plug).

CAUTION

HEARING LOSS

Be careful not to turn the volume up too high when using headphones. Listening for prolonged periods to irritatingly loud volumes can damage your hearing.

HEARING LOSS

Do not leave on headphones while switching the power On or Off. The irritating noise that can result can damage your hearing.

Right Side of Computer

1. Mobile multi-bay

One of the following is installed, depending on the model.

• Internal CD-ROM drive unit

• Internal CD-R/RW drive unit

• Internal DVD-ROM & CD-R/RW drive unit

• SuperDisk or 2nd Hard Disk. (Optional)

• Weight Saver. (Optional) The unit installed in the multi-bay can be replaced.

2. Mobile multi-bay unit eject lever

To remove the unit installed in the mobile multi-bay, raise this lever.

SECTION 1

Left Side of Computer

1. Fan Exhaust

The fan exhaust assists in the proper cooling of the system. This fan rotates if the temperature inside the computer reaches a certain level.

CAUTION

Breakdown

Do not block the cooling f an hole. If you do, heat can build up within the computer and cause breakdown.

2. Modem connector (Modem (RJ-11) Telephone Jack)

Some models have a modem connector. The modem (RJ-11) telephone jack is for attaching a telephone line to the internal modem.

3. Anti-theft Lock

This anti-theft lock allow you to attach an optional physical lock down device.

Critical Point

This theft prevention lock supports the Kensington Microsaver Security System. Product name: Microsaver (security wire)

4. PC card slots

These are the slots for loading PC cards. The bottom slot is Slot 1 and the top slot is Slot 2.

Critical Point

Some OSs treat Slot 1 (bottom) as Slot 0 and Slot 2 (top) as Slot 1.

5. PC card eject buttons

Press here to eject a PC card.

SECTION 1

Rear Panel

1. Serial connector

This is the connector for equipment with an RS-232C interface.

2. Parallel connector

This is the connector for a printer or other device using a parallel interface.

3. External display connector

This is the connector for a CRT display or other external display.

4. Infrared communications port

This is the interface for infrared communications.

Critical Point

The infrared communications port is used with “Wireless Link”. When using infrared communications, keep the A C adaptor and an y e xternal display de vice away from the infr ared communications port. They can cause noise and malfunctions.

5. PS/2 Port

This PS/2 port allows you to connect an external keyboard, numeric keypad or mouse.

6. Air intake hole

This hole allows the cooling fan to take in air.

CAUTION

BREAKDOWN

Do not block the cooling f an hole. If you do, heat can build up within the computer and cause breakdown.

7. LAN connector

A LAN cable can be connected here.

8. S-Video Out Port

The S-Video port allows you to connect and used directly any S-Video device,such as a VCR or Television. (This port have 7 pins but you can use the 4 pins S-Video cable to connect.)

9. USB connectors

You can connect USB peripheral equipment, such as USB printers, to these these connectors.

10. DC-IN connector

This is the connector for the AC adaptor.

IMPORTANT

• When connecting per ipheral equipment to this computer, always check that the connector is facing the correct direction and push straight in.

SECTION 1

Bottom of Computer

1. Internal battery pack

This is the internal battery pack.

2. Expansion RAM module slot

This is the slot for installing memory in this computer.

Port Replicator

Anti-theft Lock

PS/2 Port for keyboard

PS/2 Port for Mouse

Parallel Port

External Monitor Port

Serial Port

External Floppy Disk Drive Port (Not applicable for this model)

SECTION 1

Lan (RJ-45) Port

DC Power Jack

USB Port

Docking Port

Port Replicator Release Latch

Line-out Jack

Line-in Jack

SECTION 1

Status LCDs

Critical Point

When the power is switched off, the status LCDs go out except for the charging indicator.

1. SUS/RES indicator ( )

When this computer is running, this lamp lights up and when the computer is on standby, this lamp flashes.

2. AC Adapter indicator ( )

Lights up to show that the computer is running on power from the AC adaptor.

3. Battery mounting display (1, 2 )

Lights up when a battery is installed. 1 is the internal battery and 2 is an expansion battery in the mobile multi-bay.

4. Battery charge display ( )

Lights up when the battery is being charged. If the charging stops to let the battery cool off because it is too hot, this display flashes.

5. Battery remaining capacity display ( )

Indicates the amount of battery capacity remaining. “Hardware” – “Checking the remaining battery capacity”.

6. CD access display ( )

Lights up when the CD is being accessed.

7. Hard disk access display ( )

Lights up when the internal hard disk is being accessed.

8. Diskette access display ( )

Lights up when a diskette or superdisk is being accessed.

IMPORTANT

• The diskette access display in the status display LCDs does not light up if the mobile multi-bay FDD unit is installed and accessed. To check whether or not that unit is being accessed, check its own access lamp. Alwa ys make sure that the access lamp is out before remo ving a diskette.

9. PC card access display ( , )

Lights up when a PC card is being accessed. The bottom slot is Slot 1 and the top slot is Slot 2.

10. Num Lock display ( )

Lights up when the keyboard is in numeric lock mode. Switch numeric lock mode On/Off by pressing the “Num Lk” key.

11. Caps Lock display ( )

Lights up when the caps lock is on. (This is the state in which keys pressed are input as uppercase letters.) Switch the Caps Lock on/off by pressing “Caps Lock”.

12. Scroll Lock display ( )

Lights up when the screen is locked so that it does not scroll. Switch the scroll lock On/Off by pressing the “Fn” + “Num Lk” keys at the same time. How the display operates during a scroll lock depends on the application.

13. Security display ( )

When a password is set with the accompanying “Security Button”, this lights up when the password is required. If the security display lights up when this computer’s power is switched On or when it resumes operation, input the password.

SECTION 1

Critical Point

Never press the Power button while the hard disk access or diskette access display is lit! Doing so can destroy data on the hard disk or diskette or superdisk. Some OSs treat Slot 1 (bottom) as Slot 0 and Slot 2 (top) as Slot 1.

SECTIONSECTION

SECTION

SECTIONSECTION

SECTION

SECTIONSECTION

This chapter covers basic handling of peripheral equipment installed in this computer and that can be installed on this computer.

SECTION 2

1. Before Installing Peripheral Equipment

Peripheral Equipment That Can Be Used

USB mouse

PC card

Numeric keypad

Memory

Mouse

Printer Memory

Internal CD-ROM drive unit

Internal CD-R/RW drive unit

Internal DVD-ROM & CD-R/RW drive unit

Cautions for Handling

Please note these cautions before installing peripheral equipment.

• Some peripheral equipment requires setup on the computer Some peripheral equipment can not be operated by just connecting it to the computer. Such

peripheral equipment requires that settings be made on the computer after the peripheral equipment is connected. For example, when you use a printer or PC card, after you install it, you must install the driver . There is also equipment that requires no settings, f or example memory . When connecting peripheral equipment, read this manual carefully so that you can connect the peripheral equipment correctly.

• Read the manual for the peripheral equipment too

The installation methods given in this manual are just examples . Always read the manual f or the peripheral equipment together with this manual.

• Use original Fujitsu peripheral equipment

The “System Configuration Diagram” shows the original Fujitsu peripheral equipment available for this computer. Correct operation of products from other companies can not be assured. When using peripheral equipment from other companies, we recommend that you inquire with the manufacturer of the peripheral equipment.

Questions concerning peripheral equipment from another company can best be answered by that company.

• Use peripheral equipment that supports ACPI

This computer is set to ACPI mode. If you use peripheral equipment that does not support ACPI mode, the power conservation and other functions may not operate correctly.

Also, this computer does not support low-lev el standby (ACPI S1). If any peripheral equipment that you use only supports low-level standby, do not put this computer on standby or hibernate when using such peripheral equipment.

• Cautions for Installation/Removal

When installing peripheral equipment other than a PS/2 mouse, complete the operation system setup first. If you install such peripher al equipment before setting up the operating system, the operating system may not be set up correctly. For details on operating system setup, see the “User’s Manual”.

IMPORTANT

• When connecting per ipheral equipment to this computer, always check that the connector is facing the correct direction and push straight in.

• When installing multiple pieces of peripheral equipment, install and complete the settings for one piece of peripheral equipment at a time.

SECTION 2

+ 72 hidden pages