Fujitsu PC Corporation has made every effort to ensure
the accuracy and completeness of this document.
However, as ongoing development efforts are continually
improving the capabilities of our products, we cannot
guarantee the accuracy of the contents of this document.
We disclaim liability for errors, omissions, or future
changes.
Fujitsu, the Fujitsu logo, and LifeBook are registered
trademarks of Fujitsu Limited.
The following are registered trademarks of Microsoft
Corporation: MS, MS-DOS, Windows.
PCMCIA is a trademark of the Personal Computer
Memory Card International Association.
Intel and Pentium are registered trademarks and
SpeedStep is a trademark of Intel Corporation or its
subsidiaries in the United States and other countries.
Adobe Acrobat Reader is a registered trademark of
Adobe System Inc.
Earthlink is a registered trademark of EarthLink
Network, Inc.
Quicken is a registered trademark of Intuit, Inc.
WinDVD is a trademark of InterVideo, Inc.
Netscape 6 is a registered trademark of Netscape
Communications Corporation.
PowerQuest and Drive Image are registered trademarks
of PowerQuest Corp.
McAfee is a registered trademark of Network Associates/
McAfee.com, Inc.
BayManager is a registered trademark of Softex, Inc.
The DVD player found in some models of the LifeBook
notebook incorporates copyright protection technology
that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by
Macrovision Corporation and other rights users. Use of
this copyright protection technology must be authorized by Macrovision Corporation, and is intended for
home and other limited viewing uses only unless authorized by Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
Dolby Headphone manufactured under license from
Dolby Laboratories. “Dolby”, “Pro Logic”, and the
double-D symbol are trademarks or registered trademarks of Dolby Laboratories. Confidential Unpublished
works. Copyrights 1992-1999 Dolby Laboratories. All
rights reserved.
All other trademarks mentioned herein are the property
of their respective owners.
Responsible Party Name:Fujitsu PC Corporation
Address: 5200 Patrick Henry Drive
Telephone:(408) 982-9500
Declares that product:Model Configurations: LifeBook E4010
This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions: (1) This
device must not be allowed to cause harmful interference, (2) This device must accept any interference received,
including interference that may cause undesired operation.
Preparation for wireless LAN connection . . . . .101
Connection to the network. . . . . . . . . . . . . . . .103
LifeBook E Series Notebook
1
Preface
1
LifeBook E Series Notebook - Section 1
2
Preface
Preface
ABOUT THIS GUIDE
The LifeBook® E Series notebook from Fujitsu PC
Corporation is a powerful notebook computer. It is
powered by an Intel microprocessor, has a built-in color
display, a number of possible configurations, and brings
the computing power of desktop personal computers
(PCs) to a portable environment.
This manual explains how to operate your LifeBook
notebook’s hardware and built-in system software. Your
notebook is compatible with the IBM® PC AT.
It comes with Microsoft® Windows® 2000 Professional,
Windows XP Home Edition, or Windows XP Professional pre-installed.
The LifeBook notebook is a completely self-contained
unit with either an active-matrix XGA or SXGA+ TFT
color LCD display. It has a powerful interface that
enables it to support a variety of optional features.
Conventions Used in the Guide
Keyboard keys appear in brackets.
Example: [Fn], [F1], [ESC], [ENTER] and [CTRL].
Pages with additional information about a specific topic
are cross-referenced within the text.
Example: (See page xx.)
On screen buttons or menu items appear in bold
Example: Click OK to restart your LifeBook notebook.
DOS commands you enter appear in Courier type.
Example: Shut down the computer?
POINT
The point icon highlights information that will enhance
your understanding of the subject material.
CAUTION
The caution icon highlights information that is
important to the safe operation of your computer, or to
the integrity of your files. Please read all caution
information carefully.
FUJITSU CONTACT INFORMATION
Service and Support
You can contact Fujitsu Service and Support the
following ways:
■
Toll free: 1-800-8Fujitsu (1-800-838-5487)
■
Fax: 1-901-259-5700
■
E-mail: 8fujitsu@fujitsupc.com
■
Web site: http://www.fujitsupc.com
Before you place the call, you should have the
following information ready so that the customer
support representative can provide you with the
fastest possible solution:
■
Product name
■
Product configuration number
■
Product serial number
■
Purchase date
■
Conditions under which the problem occurred
■
Any error messages that have occurred
■
Hardware configuration
■
Type of device connected, if any
Fujitsu Online
You can go directly to the online Fujitsu Product catalog
for your LifeBook notebook by clicking on the LifeBook
Accessories Web site URL link, located in the Windows
Start menu.
You can also reach Fujitsu Service and Support online by
clicking on the Fujitsu Service and Support Web site
URL link, located in the Service and Support Software
folder of the Windows Start menu.
POINT
You must have an active internet connection to use the
on-line URL links.
WARRANTY
Depending upon the configuration of your LifeBook
notebook, your system is backed by either a one-year or
three-year International Limited Warranty. Check the
information that came with your LifeBook notebook for
further warranty terms and conditions.
WARNING
The warning icon highlights information that can be
hazardous to either you, your LifeBook notebook, or
your files. Please read all warning information carefully.
3
LifeBook E Series Notebook – Section 1
4
2
Getting to Know
Your LifeBook Notebook
5
LifeBook E Series Notebook – Section 2
6
Figure 2-1. LifeBook E Series
Overview
This section describes the components of your Fujitsu
LifeBook notebook. We strongly recommend that you
read it before using your LifeBook notebook – even if
you are already familiar with notebook computers.
UNPACKING
When you receive your LifeBook notebook, unpack it
carefully, and compare the parts you have received with
the items listed below.
Getting to Know Your LifeBook
Figure 2-2. AC Adapter
For a pre-configured model you should have:
■
LifeBook E Series notebook computer (Figure 2-1)
■
Lithium ion battery, pre-installed
■
AC adapter with AC power cord (Figure 2-2)
■
Weight Saver
■
Modular optical drive
■
Phone/Modem (RJ-11) telephone cable
■
Drivers and Applications Restore CD
■
Getting Started Guide
■
User’s Guide (this guide)
■
International Limited Warranty Brochure
■
Microsoft-associated materials
■
Premium Care registration card
Depending upon the configuration of your system, one
or more of the following items may also be included in
the box:
■
External USB floppy disk drive
■
DVD Application CD
■
CD-RW Application CD
■
Additional battery(ies)
7
LifeBook E Series Notebook – Section 2
Status
Indicator
Panel
Closed
Cover
Switch
Tou ch pa d
Pointing
Device
Stereo
Speaker
Headphone
Jack
Microphone
Jack
Figure 2-3. LifeBook notebook with display open
Locating the Controls
Stereo Speaker
Display
Panel Latch
Display Panel
LifeBook Security/
Application Panel
Power and
Suspend/
Resume
Button
Keyboard
Stereo Speakers
The built-in dual speakers allow for stereo sound.
and Connectors
TOP AND FRONT COMPONENTS
The following is a brief description of your LifeBook
notebook’s top and front components.
Display Panel Latch
The display latch locks and releases the display panel.
Display Panel
The display panel is a color LCD panel with back
lighting for the display of text and graphics.
Status Indicator Panel
The Status Indicator Panel displays symbols that correspond to specific components of your notebook. (See
Status Indicator Panel on page 13 for more information)
Power and Suspend/Resume Button
The Power and Suspend/Resume button is always used
to power on your notebook from its Off state. It is also
used as the Suspend/Resume button. This allows you to
suspend notebook activity without powering off, resume
your notebook from suspend mode, and power on your
notebook when it has been shut down. (See Power On on
page 31 for more information) and (See Power and
Suspend/Resume Button on page 34 for more information)
Closed Cover Switch
The closed cover switch turns off the LCD backlighting
when the display panel is closed.
Keyboard
A full-size keyboard with dedicated Windows keys.
(See Using the Keyboard on page 16 for more information)
Touchpad Pointing Device
The pointing device is a Touchpad that allows you
simple cursor control. (See TouchPad Pointing Device on
page 18 for more information)
LifeBook Security/Application Panel
The LifeBook Security/Application Panel provides
hardware security and one-touch application launch
capability. (See LifeBook Security/ Application Panel on
page 22 for more information)
Microphone Jack
The microphone jack allows you to connect an external
mono microphone. (See Microphone Jack on page 52 for
more information)
Headphone Jack
The headphone jack allows you to connect headphones
or powered external speakers. (See Headphone Jack on
page 52 for more information)
8
Getting to Know Your LifeBook
Wireless LAN Antenna On/Off Switch
Fan Vents
Figure 2-4. LifeBook notebook left-side panel
Modem Port
LEFT-SIDE PANEL COMPONENTS
Following is a brief description of your LifeBook notebook’s left-side components.
Modem Port
The modem port is designed to accept a Modem (RJ-11)
telephone jack for the multi-national internal 56K
modem. (See Communications Ports on page 51 for more
information)
POINT
The internal modem is designed to the ITU-T V.90
standard. Its maximum speed of 53000bps is the
highest allowed by FCC, and its actual connection rate
depends on the line conditions. The maximum upload
speed is 33600bps.
Anti-theft Lock Slot
PC Card Slots
PC Card Eject Buttons
PC Card Slots
The PC Card Slots allow you to install two Type I or
Type II PC Cards or one Type III PC Card.
(See PC Cards on page 47 for more information)
Anti-theft Lock Slot
The anti-theft lock slot allows you to attach an optional
physical lock down device.
Fan Vents
The fan vents assist in the proper cooling of the system.
Wireless LAN Antenna On/Off Switch
The Wireless LAN Antenna On/Off Switch turns the
wireless LAN antenna on and off in systems with an
optional Wireless LAN device installed. For systems
without an optional Wireless LAN device installed, the
Wireless Antenna On/Off Switch is present, but nonfunctional.
CAUTION
The internal modem is not intended for use with Digital
PBX systems. Do not connect the internal modem to a
digital PBX as it may cause serious damage to the
internal modem or your entire LifeBook notebook.
Consult your PBX manufacturer’s documentation for
details. Some hotels have Digital PBX systems. Be sure
to find out BEFORE you connect your modem. Thirdparty hardware is available to allow modem-to-PBX
interface.
9
LifeBook E Series Notebook – Section 2
Figure 2-5. LifeBook notebook right-side panel
Flexible Bay Release Latch
Flexible Bay
RIGHT-SIDE PANEL COMPONENTS
Following is a brief description of your LifeBook notebook’s right-side components.
Flexible Bay
The Flexible Bay can accommodate one of the following
devices. (See Flexible Bay Devices on page 20 for more
information)
■
Modular DVD/CD-RW combo drive
■
Modular DVD drive
■
Modular CD-ROM drive
■
Modular Lithium ion bay battery
Flexible Bay Release Latch
The Flexible Bay release latch releases the Flexible Bay
device.
10
Serial Port
Parallel Port
External Monitor Port
Getting to Know Your LifeBook
Infrared Port
LAN Port
S-Video Out Port
Figure 2-6. LifeBook notebook back panel
BACK PANEL COMPONENTS
Following is a brief description of your LifeBook notebook’s rear panel components.
Serial Port
The serial port allows you to connect serial (RS-232C)
devices. (This is also sometimes referred to as a COMM
port.) (See Serial Port on page 51 for more information)
Parallel Port
The parallel port allows you to connect parallel
devices. (This is also sometimes referred to as an
LPT port.) (See Parallel Port on page 51 for more infor-
mation)
External Monitor Port
The external monitor port allows you to connect an
external monitor. (See External Monitor Port on page 52
for more information)
Infrared Port
The fast IrDA compatible port allows you to communicate with another IrDA compatible infrared device
without a cable.
DC Power Jack
USB 2.0 Ports (Qty. 2)
USB 2.0 Ports
The USB ports allow you to connect Universal Serial Bus
2.0 or USB 1.1 devices. (See Universal Serial Bus (USB)
2.0 Ports on page 51 for more information)
DC Power Jack
The DC power jack allows you to plug in the AC adapter
or the optional Auto/Airline adapter to power your LifeBook notebook and charge the internal Lithium ion
battery.
LAN Port
The LAN port is designed to accept a Local Area
Network (LAN) RJ-45 jack. (See Communications Ports
on page 51 for more information)
S-Video Out Port
The S-Video out port is used to transmit a higher
resolution video signal to a compatible TV or VCR.
(See S-Video Out Port on page 52 for more information)
11
LifeBook E Series Notebook – Section 2
Part Number
Label
(approximate
location)
Main Unit
Label
(approximate
location)
Lithium ion
Battery Bay
Figure 2-7. LifeBook notebook bottom panel
Docking
Port
Certificate of
Authenticity
(approximate
location)
Memory Upgrade
Compartment
BOTTOM COMPONENTS
Following is a brief description of your LifeBook notebook’s bottom panel components.
Configuration Label and Version Label
The configuration label shows the configuration part
number, the Fujitsu part number, and the various
components that make up your LifeBook notebook. The
version label contains the system part number and serial
number. These labels provide manufacturer information
that you will need to give your support representative in
the event you find it necessary to contact Fujitsu.
Lithium ion Battery Bay
The battery bay contains the internal Lithium ion
battery. It can be opened for the removal of the battery
when stored over a long period of time or for swapping
a discharged battery with a charged Lithium ion battery.
(See Lithium ion Battery on page 39 for more information)
Docking Port
The docking port allows you to connect an optional port
replicator or docking station. (See Docking Port on
page 52 for more information)
Memory Upgrade Compartment
Your LifeBook notebook comes with high speed PC2100
DDR266 SO-DIMM memory. The memory upgrade
compartment allows you to expand the system memory
capacity of your LifeBook notebook, hence improving
overall performance. (See Memory Upgrade Module on
page 49 for more information)
12
Getting to Know Your LifeBook
Power
Battery
Identifier
AC AdapterBattery
Level
Battery
Charging
Hard Drive
Access
Media Drive
Access
Figure 2-8 Status Indicator Panel
Status Indicator Panel
The Status Indicator panel is located in the recess just
above your keyboard. Within this panel are symbols that
correspond with a specific component of your LifeBook
notebook. These symbols tell you how each of those
components are operating. (Figure 2-8)
POWER INDICATOR
The Power indicator symbol states whether your system
is operational. It has several different states, each of
which tells you what mode your LifeBook notebook is in
at that time.
■
Steady On: This means that there is power to your
LifeBook notebook and that it is ready for use.
■
Flashing: This means that your LifeBook notebook is
in Suspend mode.
■
Steady Off: This means that your system is either in
Save-to-Disk mode, or that your LifeBook notebook
has been turned off with the power/suspend/resume
button.
If you are charging your battery, the Power indicator
symbol remains on even if your notebook is shut off.
The Power indicator symbol will also remain on if you
have either adapter connected and are shut down from
Windows, but have not turned off with the power/
suspend/resume button.
PC Card
Slot Identifier
Floppy Disk
Drive Access
PC Card
Access
NumLk
CapsLk
ScrLk
Security
Indicator
Airline adapter or the batteries. This icon has two
different states that can tell you what power source your
LifeBook notebook is using.
■
On: This means that either of the adapters are
currently in use.
■
Off: Power is only coming from the batteries, and
you do not have an adapter connected.
BATTERY LEVEL INDICATORS
The two Battery Level indicators state whether or not the
primary Lithium ion battery and/or the optional second
Lithium ion battery are installed (Battery 1 refers to the
primary Lithium ion battery, while Battery 2 refers to the
Flexible Bay optional second battery). In addition, this
symbol states how much charge is available within each
installed battery. The symbol will only be displayed for a
battery that is currently installed in your LifeBook notebook. (Figure 2-9)
AC ADAPTER INDICATOR
The AC Adapter indicator states whether your LifeBook
notebook is operating from the AC adapter, the Auto/
13
LifeBook E Series Notebook – Section 2
76%–100% Charging
76%–100%
51%–75%
26%–50%
11%–25%
Low Warning <11%
Critical Low or
Dead Battery
Shorted Battery
Figure 2-9 Battery Level Indicator
CAUTION
A shorted battery is damaged and must be replaced
immediately.
POINT
If there is no battery activity, the power adapters are not
connected, and the power is Off, the Battery Level
indicators will also be off.
BATTERY CHARGING INDICATORS
Located to the left of each of the Battery Level indicators
is a small arrow symbol. This symbol states whether that
specific battery is charging. This indicator operates
whether the power on or off, and will flash if the battery
is too hot or cold to charge.
POINT
The Windows DVD/CD Auto Insert Notification
function will periodically check for a DVD/CD installed
in the drive, causing the Media Drive Access indicator to
flash. The DVD/CD Auto Insert Notification function
allows your system to automatically start a DVD/CD as
soon as it is inserted in the drive and the tray is closed. It
will begin playing an audio DVD/CD or will start an
application if the DVD/CD has an auto-run file.
(See
Auto Insert Notification Function on page 45 for more
information)
HARD DRIVE OR REMOVABLE
MEDIA DRIVE ACCESS INDICATOR
The Hard Drive Access indicator states whether your
internal hard drive or optional second hard drive is
being accessed.
POINT
The Hard Drive Access indicator does not show which
hard drive is being accessed.
FLOPPY DISK DRIVE
ACCESS INDICATOR
The Floppy Disk Drive Access indicator states whether
the floppy disk drive is being accessed. This indicator
will flash if your software tries to access a disk even if no
floppy disk drive is installed. (See External USB Floppy
Disk Drive on page 41 for more information)
CAUTION
Batteries subjected to shocks, vibration or extreme
temperatures can be permanently damaged.
MEDIA DRIVE ACCESS INDICATOR
The Media Drive Access indicator tells you that the DVD
or CD-RW drive is being accessed. If the Auto Insert
function is active, the indicator will flash periodically
when your system is checking the media drive. If the
Auto Insert Notification function is not active, the indicator will only flash when you access the media drive.
The default setting is the Auto Insert Notification function active. (See Auto Insert Notification Function on
page 45 for more information)
14
PC CARD ACCESS INDICATORS
The PC Card Access indicator(s) state whether or not
your LifeBook notebook is accessing a PC Card(s). The
indicator will flash if your software tries to access a PC
Card even if there is no card installed. The number
inside the indicator refers to which PC Card slot is being
accessed. (See PC Cards on page 47 for more information)
NUMLK INDICATOR
The NumLk indicator states that the internal keyboard is
set in ten-key numeric keypad mode. (See Using the
Keyboard on page 16 for more information)
POINT
If you are using the optional external numerical keypad,
pressing the [NumLk] key will activate the external
keypad. The indicator will come on, however it will not
change any of the functionality of your keyboard keys.
CAPSLOCK INDICATOR
The CapsLock indicator states that your keyboard is set
to type in all capital letters. (See Using the Keyboard on
page 16 for more information)
SCRLK INDICATOR
The ScrLk indicator states that your scroll lock is active.
(See Using the Keyboard on page 16 for more information)
SECURITY INDICATOR
The Security Indicator flashes (if a password was set)
when the system resumes from Off or Suspend modes.
You must enter the password that was set in the Security
Panel before your system will resume operation.
Getting to Know Your LifeBook
15
LifeBook E Series Notebook – Section 2
Function Keys
Fn Key
Start Key
Numeric Keypad
(surrounded with
thick black line)
Figure 2-10 Keyboard
Keyboard
USING THE KEYBOARD
Your Fujitsu LifeBook notebook has an integral 87-key
keyboard. The keys perform all the standard functions of
a 101-key keyboard, including the Windows keys and
other special function keys. This section describes the
following keys.
■
Numeric keypad: Your LifeBook notebook allows
certain keys to serve dual purposes, both as standard
characters and as numeric and mathematical keys. The
ability to toggle between the standard character and
numerical keys is controlled through the [NumLk]
key.
■
Cursor keys: Your keyboard contains four arrow
keys for moving the cursor or insertion point to the
right, left, up, or down within windows, applications
and documents.
■
Function keys: The keys labeled [F1] through [F12]
are used in conjunction with the [Fn] key to produce
special actions that vary depending on what program
is running.
■
Windows keys: These keys work with your Windows
operating system and function the same as the
onscreen Start menu button, or the right button on
your pointing device.
NUMERIC KEYPAD
Certain keys on the keyboard perform dual functions as
both standard character keys and numeric keypad keys.
NumLk can be activated by pressing the [NumLk] keys.
Turning off the NumLk feature is done the same way.
Start Key
Application Key
Cursor Keys
Once this feature is activated you can enter numerals 0
through 9, perform addition ( + ), subtraction ( - ),
multiplication ( * ), or division ( / ), and enter decimal
points ( . ) using the keys designated as ten-key function
keys. The keys in the numeric keypad are marked on the
front edge of the key to indicate their secondary functions.
POINT
If you are using the optional external numerical keypad,
pressing the [NumLk] key will activate the external keypad. The indicator will come on, however it will not
change any of the functionality of your keyboard keys.
WINDOWS KEYS
Your LifeBook notebook has three Windows keys: two
Start keys and an Application key. The two Start keys
display the Start menu. This button functions the same
as your onscreen Start menu button. The Application
key functions the same as your right mouse button and
displays shortcut menus for the selected item. (Please
refer to your Windows documentation for additional
information regarding the Windows keys.)
CURSOR KEYS
The cursor keys are the four arrow keys on the keyboard
which allow you to move the cursor up, down, left and
right in applications. In programs such as Windows
Explorer, it moves the “focus” (selects the next item up,
down, left, or right).
16
FUNCTION KEYS
Your LifeBook notebook has 12 function keys, F1
through F12. The functions assigned to these keys differ
for each application. You should refer to your software
documentation to find out how these keys are used.
The [Fn] key provides extended functions for the
notebook and is always used in conjunction with
another key.
■
[Fn+F3]: Pressing [F3] while holding [Fn] will toggle
the Audio Mute on and off.
■
[Fn+F4]: Pressing [F4] while holding [Fn] will toggle
the touchpad on and off. (This function key combination only works if the BIOS setting for Advanced>
Keyboard/Mouse Features>Internal Pointing Device is
set to Manual Setting.)
■
[Fn+F5]: Pressing [F5] while holding [Fn] allows
you to toggle between video compensation and no
compensation. (Video compensation controls spacing
on the display. When it is enabled, displays with less
than 1024 x 768 or 800 x 600 pixel resolution will still
cover the entire screen.)
■
[Fn+F6]: Pressing [F6] repeatedly while holding [Fn]
will lower the brightness of your display.
■
[Fn+F7]: Pressing [F7] repeatedly while holding [Fn]
will increase the brightness of the display.
■
[Fn+F8]: Pressing [F8] repeatedly while holding [Fn]
will decrease the volume of your LifeBook notebook.
■
[Fn+F9]: Pressing [F9] repeatedly while holding [Fn]
will increase the volume of your LifeBook notebook.
■
[Fn+F10]: Pressing [F10] while holding [Fn] allows
you to change your selection of where to send your
display video. Each time you press the combination
of keys you will step to the next choice. The choices,
in order, are: built-in display panel only, both built-in
display panel and external monitor or external
monitor only.
Getting to Know Your LifeBook
17
LifeBook E Series Notebook – Section 2
Cursor
Cursor Control
Left Button
Right Button
Figure 2-11. TouchPad pointing device
TouchPad Pointing Device
The TouchPad pointing device is built into your Fujitsu
LifeBook notebook. It is used to control the movement
of the pointer to select items on your display panel. The
TouchPad is composed of a cursor control and a left and
right button. The cursor control works the same way a
mouse does, and moves the cursor around the display. It
only requires light pressure with the tip of your finger,
and the more pressure you use, the faster the cursor will
move. The left and right buttons function the same as
mouse buttons. The actual functionality of the buttons
may vary depending on the application that is being
used. (Figure 2-11)
POINT
An external mouse can be connected to the USB port
on your LifeBook notebook, and be used simultaneously with the TouchPad. However, if you boot the
system with an external mouse connected the TouchPad will be disabled or enabled depending on your
BIOS settings.
more information)
(See BIOS Setup Utility on page 31 for
CLICKING
Clicking means pushing and releasing a button.
To left-click, move the cursor to the item you wish
to select, press the left button once, and then immediately release it. To right-click, move the mouse cursor to
the item you wish to select, press the right button once,
and then immediately release it. You also have the
option to perform the clicking operation by tapping
lightly on the TouchPad once. (Figure 2-12)
Figure 2-12. Clicking
DOUBLE-CLICKING
Double-clicking means pushing and releasing the left
button twice in rapid succession. This procedure does
not function with the right button. To double-click,
move the cursor to the item you wish to select, press
the left button twice, and then immediately release it.
You also have the option to perform the double-click
operation by tapping lightly on the TouchPad twice.
(Figure 2-13)
18
Figure 2-13. Double-clicking
POINT
If the interval between clicks is too long, the
double-click will not be executed.
DRAGGING
Dragging means pressing and holding the left button,
while moving the cursor. To drag, move the cursor to
the item you wish to move. Press and hold the left
button while moving the item to its new location
and then release it. Dragging can also be done using the
TouchPad. First, tap the TouchPad twice over the item
you wish to move making sure to leave your finger on
the pad after the final tap. Next, move the object to its
new location by moving your finger across the
TouchPad, and then release your finger. (Figure 2-14)
Getting to Know Your LifeBook
Figure 2-14. Dragging
TOUCHPAD CONTROL ADJUSTMENT
The Windows Control Panel allows you to customize
your TouchPad with selections made from within the
Mouse Properties dialog box.
19
LifeBook E Series Notebook – Section 2
Figure 2-15 Flexible Bay
Flexible Bay Devices
Your LifeBook notebook contains a Flexible Bay. The
Flexible Bay can accommodate a modular CD-ROM
drive, DVD drive, DVD/CD-RW drive, Lithium ion
battery, or weight saver. (Figure 2-15)
You Flexible Bay will have one of the following devices
installed. All devices listed here are also options which
can be purchased separately. (Figure 2-16)
■
Modular CD-ROM drive: This allows you to access
software and audio CDs.
■
Modular DVD drive: This allows you to access movies,
software, and audio DVD/CDs.
■
Modular DVD-CD-RW combo drive: This allows you
to access movies, software, and audio DVD/CDs as
well as to write to CDs.
■
Modular Lithium ion battery: This is a rechargeable
battery that can be used to power your LifeBook notebook when an adapter is not connected.
■
Weight Saver: This is used to fill the bay when no
device is needed.
Flexible Bay
CD-ROM Drive
DVD/CD-RW
Combo Drive
DVD Drive
Lithium ion
Bay Battery
Weight Saver
Figure 2-16 Flexible Bay Devices
POINT
You should never leave your Flexible Bay empty when
the LifeBook notebook is in operation.
REMOVING AND INSTALLING
MODULAR DEVICES
There are two ways to remove and install modular
devices in the Flexible Bay:
■
Cold-swapping: Swapping devices while your
LifeBook notebook is powered off. (Reference the
following section.)
■
Hot-swapping: Swapping devices while your system is
active using BayManager
sections of this chapter entitled "Hot-swapping".)
20
™
software. (Reference the
Cold-swapping
To cold-swap modular devices in your Flexible Bay
follow these easy steps: (Figure 2-17)
1. Close any open files.
2. Shut down your LifeBook notebook.
3. Pull out the Flexible Bay release latch, then press the
latch in to release the modular device. This will push
your device out slightly, allowing you to remove the
device.
4. Slide your device out until it is clear of the bay.
This will require light force.
Flexible Bay
Release Latch
Figure 2-17 Removing a device from the Flexible Bay
Getting to Know Your LifeBook
Figure 2-18 Installing a device in the Flexible Bay
CAUTION
Be careful when aligning and seating devices in the bay.
If the fit is incorrect, you may damage the bay or the
device. If the device does not move easily in the bay,
remove it, and check for dirt or foreign objects. It will
require a firm push to latch the device in place.
5. Slide the device you are installing into your
LifeBook notebook until it clicks into place.
6. It is now safe to turn your notebook back on.
7. You can now access and use the device.
Your LifeBook notebook will automatically detect the
new device and activate it within your system. The drive
letters associated with the device will be created and
listed under My Computer and Windows Explorer.
Hot-swapping
Under Windows 2000 and XP, hot-swapping is provided
through the Unplug or Eject Hardware utility. The icon
for the utility appears on the taskbar. Refer to your
Windows manual on using this feature.
21
LifeBook E Series Notebook – Section 2
Figure 2-19 LifeBook Security/Application Panel
123 4
Numbered Buttons for
entering password and
launching applications
Enter
Button
LifeBook Security/
Application Panel
A unique feature of your LifeBook notebook is the
Security/Application Panel that allows you to secure your
notebook from unauthorized use. The Security/
Application Panel also allows you to launch applications
with the touch of a button when your system is on.
If the security system is activated, upon starting your
LifeBook notebook or resuming from suspend mode the
security system requires you to enter a password code
using the buttons on the Security/Application Panel.
After entering a correct password, your LifeBook
notebook resumes system operation. (Figure 2-19)
SETTING UP YOUR
LIFEBOOK SECURITY PANEL
When you receive your LifeBook notebook, the security
panel application is pre-installed without any passwords.
The following sections provide detailed information on
your security panel, and how to set, change or remove
passwords.
Numbered Buttons
Use these buttons to enter your password. (Figure 2-19)
Enter Button
After entering the button strokes, push this button to
enter the password into the notebook. (Figure 2-19)
notebooks in a group environment should not use a
common password. A password consists of one to five
button strokes plus the enter button. A valid stroke
consists of pushing one or up to four buttons simultaneously. The following are valid button strokes:
n
Pushing [4] by itself
n
Pushing [2] and [3] at the same time
n
Pushing [1], [2], and [4] at the same time
n
Pushing [1], [2], [3], and [4] at the same time
The following are valid passwords. The numbers
within braces ({ }) are button strokes using more
than one button.
n
{[2]+[3]}, [1], [enter]
n
[4], [enter]
n
{[1]+[3]}, {[2]+[3]+[4]}, [1], [4], [2], [enter]
Setting Passwords
When shipped from the factory, no passwords are set.
You have a choice of having no password or setting a
supervisor and user password. You must set the supervisor password before the user password.
POINTS
n
The purpose of supervisor password is to be able to
bypass the user password in case the user password
is forgotten. The supervisor password alone will not
lock the system.
n
You have to set both the supervisor and user passwords for the security panel to work.
PASSWORDS
The user and supervisor password may be set on this
LifeBook notebook. A supervisor password is typically
the same for all notebooks in a working group, office, or
company to allow for system management. Individual
22
Getting to Know Your LifeBook
Setting Supervisor Password
You must have set a supervisor password before setting
any user passwords. The supervisor password can bypass
the user password.
1. Go to the Start menu.
2. Click on Run.
3. Type in
"C:\Program Files\Fujitsu\
Security Panel Application\
Supervisor\FJSECS.EXE" (be sure to use
the quotation marks), then press [Enter]
4. Follow the on-screen instructions to set the
Supervisor password.
Setting User Password
1 Go to the Start menu.
2. Click on Programs.
3. Click on Security Panel Application > Security Panel Application.
4. Follow the on-screen instructions to set the
user password.
POINT
You may change or remove the supervisor or user
password by repeating the steps defined above.
OPERATING YOUR LIFEBOOK SECURITY
APPLICATION PANEL
The security lock feature is in effect both when the system
resumes from OFF or suspend state. You always need to
push the Suspend /Resume button to input the user password. Your system will not begin the boot sequence
without entering your supervisor/user password.
From Off State
1. Turn on your system.
2. When the Security Indicator flashes, enter the
password and press Enter button.
For example, if the password is 22222,
Press Button Number 2 five times and press Enter
button.
The LifeBook notebook will boot to normal operation.
From Suspend State
1. Press your Suspend/Resume button.
2. When the Security Indicator flashes, enter the password and press Enter button.
The notebook should resume normal operation.
Incorrect Password Entry
If an invalid supervisor or user password is entered three
times in succession, the system will “beep” for about one
minute. If a valid password is entered within a minute
(while system beeps), the beeping will stop and the LifeBook notebook will resume normal operation. If no
password or an invalid password is entered while the
system beeps, the system will return to its previous
locked state (suspend or off) and the Security Indicator
will go off. To reactivate the LifeBook notebook after a
password failure, you must press the Suspend/Resume
button, then enter a correct password.
POINT
Remember the user password you specified on the
Security Panel Application. If you forget the password
you will not be able to use your computer. The supervisor password can override the user password.
PRECAUTIONS
Opening and Closing the Cover
Closing the cover may place the notebook into suspend
mode. Opening the cover does not automatically place
the notebook into normal operation. Instead, you must
enter the proper security password after pushing the
Suspend/Resume button.
Low Battery Operations
If your LifeBook notebook has a low battery, pushing
the suspend/resume button only turns on the Security
Indicator. Your notebook does not unlock, and the
Security Indicator LED turns off after one minute. To
resume normal operation, first attach a power supply to
the LifeBook notebook. Then you may unlock the notebook.
UNINSTALLING THE SECURITY
PANEL APPLICATION
You have two options when uninstalling the security
panel application:
n
Uninstall the security panel application software.
This will disable all security feature.
n
Uninstall the security panel application with
password still active. This will not allow any
changes to the password.
Uninstalling the Security Panel
Application Software
Remove passwords when User wants no password
protection whatsoever and doesn’t want to give anybody
the utility to set a password on their computer. In this
case, if passwords (supervisor, user, or both) are set, the
passwords must first be cleared BEFORE removing the
application. To clear passwords, follow same procedure
in SETTING PASSWORD CODES except this time,
select REMOVE, enter current password then click Next.
When asked to confirm select Yes .
23
LifeBook E Series Notebook – Section 2
Removing Security Panel Application with
Passwords Still Active
Using this feature will not allow any changes to
the password.
POINT
Removing the applications does not remove the
password. It simply removes the utility to change/add/
remove passwords. To change your password you must
reinstall the application.
User:
1. Go to Start Menu, Click on Control Panel.
2. Open Add/Remove Programs Properties in the
Control Panel.
3. Select the Security Panel Application in the list, and
click Add/Remove.
4. When the Confirm File Deletion box appears,
click Ye s .
Supervisor:
1. Go to Start Menu, Click on Control Panel.
2. Open Add/Remove Programs Properties in the
Control Panel.
3. Select the Security Panel Application forSupervisor in the list, and click Add/Remove.
4. When the Confirm File Deletion box appears,
click Ye s .
Reinstalling the Security Application Panel
To reinstall supervisor or user security application, you
will need your Drivers and Applications Restore CD. The
Secpanel folder located in the Utilities\Security Panel
contains the setup files for supervisor and user security
application.
1. Double-click the Setup FJSECS.EXE file. The
Installing Security Panel Application window will
appear. Follow the instructions on the screen.
2. Double-click the Setup FJSECU.EXE file. The
Installing Security Panel Application window will
appear. Follow the instructions on the screen.
Supervisor and user passwords can be set by the
Windows Software which are FJSECS.EXE and
FJSECU.EXE respectively. FJSECU.EXE for user password cannot run without supervisor password.
First you need to run FJSECS.EXE to set supervisor password before setting user password. Follow instructions
under Setting Passwords on page 22.
If you forget both passwords, contact Fujitsu Service and
Support at 1-800-8Fujitsu (1-800-838-5487). Fujitsu
charges a service fee for unlocking a password restricted
LifeBook notebook. When calling please have a valid
credit card and provide proof of ownership. You will
then be given instructions on where to ship your LifeBook notebook.
LAUNCHING APPLICATIONS WITH
THE SECURITY/APPLICATION PANEL
The security panel also enables you to launch applications
with the touch of a button when your system is on.
Pressing any of the buttons will launch a user-defined
application. Your LifeBook notebook is pre-installed with
software utilities that let you operate and configure your
LifeBook Security/Application Panel. These utilities are
found under the Start menu, under Programs, then under
LifeBook Application Panel. They include Application
Panel Setup, Guide, Activate Panel and Deactivate Panel.
Configuring your LifeBook Application Panel
When you start Windows, the LifeBook Application
Panel is automatically activated. An icon resembling a
finger pressing a button will appear on the system tray
(the indented portion of the status bar where the clock is
displayed). When you see this icon you will know that
LifeBook Application Panel is active.
As an application launcher, the LifeBook Application
Panel is very flexible, giving you a variety of options. To
set up the Panel to best suit your needs, we have
provided the Application Panel Setup utility that quickly
and easily helps you make the most of this valuable
feature.
To configure your LifeBook Application Panel with
Application Panel Setup:
1. Click on Start.
2. Click on Programs.
3. Click on LifeBook Application Panel.
4. Click on Application Panel Setup.
The Application Panel Setup utility will appear. There
are tabs that correspond to the application buttons on
the LifeBook Application Panel. When you receive your
LifeBook notebook, these buttons are pre-configured to
launch the associated programs, as defined in Chapter 7.
POINT
The tabs in Application Panel Setup may not be in the
same order as the buttons on your LifeBook notebook,
please select the tab you wish to change carefully.
To change an application associated with the Application
buttons, click on the tab for the button you would like to
reconfigure – for example, Application A. Click on
Browse from Start Menu, scroll down the list of applications, click on the application you wish to launch with
this button, and then click OK. The button will now
launch the new application.
24
Loading...
+ 102 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.