COPYRIGHT
Fujitsu™ PC Corporation has made every eVort to ensure the accuracy and completeness of this document. However, as ongoing development eVorts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes.
LifeBook, Fujitsu,and the Fujitsu logo are trademarks of Fujitsu Limited.
The following are registered trademarks of IBM Corporation:IBM, IBM PC AT, IBM PS/2. The following are registered trademarks of
Microsoft Corporation:MS,MS-DOS, Windows 95. PCMCIA is a trademark of the Personal Computer Memory Card International Association.
Phoenix and the Phoenix logo are registered trademarks of Phoenix Technologies,Ltd. Pentium is a registered trademark and
MMX technology is a trademark of Intel Corporation. PC-Doctor is a trademark of watergate.software.inc. SoftPEG is a registered trademark of
CompuCore Multimedia Inc. LapLink is a registered trademark of Traveling Software Inc.
AudioRack is a registered trademark of ESS Technology, Inc.
MegaPhone is a registered trademark of Cypress Research Corporation
All other trademarks mentioned herein are the property of their respective owners.
We cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes.
© Copyright 1996 Fujitsu PC Corporation. All rights reserved. No part of this publication may be copied, reproduced, or translated, without prior written consent of Fujitsu PC Corporation. No part of this publication may be stored or transmitted in any electronic form without the written consent of Fujitsu PC Corporation.
DECLARATION OF CONFORMITY according to FCC Part 15
Responsible Party Name: Fujitsu PC Corporation
Address: 598 Gibraltar Drive Milpitas,CA 95035
Telephone: (408) 935-8800
Declares that product: Model:LifeBook 735Dx. LifeBook 755Tx. LifeBook 765Tx.
Complies with Part 15 of the FCC Rules.
This device complies with Part 15 of the FCC rules.
Operations is subject to the following two conditions:
(1) This device must not be allowed to cause harmful interference, (2) This device must accept any interference received, including interference that may cause undesired operation.
David Woo |
Fujitsu |
9/23/97 |
full name |
company |
date |
C A U T I O N
Changes or modification not expressly approved by Fujitsu PC Corporation could void this user’s authority to operate the equipment.
FCC NOTICES
Notice to Users of Radios and Television
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oV and on, the user is encouraged to try to correct the interference by one or more of the following measures:
■Reorient or relocate the receiving antenna.
■Increase the separation between the equipment and receiver.
■Connect the equipment into an outlet that is on a diVerent circuit than the receiver.
■Consult the dealer or an experienced radio/TV technician for help.
Shielded interconnect cables must be employed with this equipment to ensure compliance with the pertinent RF emission limits governing this device.
Notice to Users of the US Telephone Network
The LifeBook™ 700 Series notebook computers are supplied with an internal modem which complies with Part 68 of the FCC rules.On this notebook is a label that contains the FCC Registration Number and the Ringer Equivalence Number (REN) for this equipment among other information. If requested, the user must provide their telephone company with the following information:
1.The telephone number to which the notebook is connected.
2.The Ringer Equivalence Number (REN) for this equipment.
3.That the equipment requires a standard modular jack type USOC RJ-11C which is FCC
Part 68 compliant.
4.The FCC Registration Number.
This equipment is designed to be connected to the telephone network or premises wiring using a standard modular jack type USOC RJ-11C which is FCC Part 68 compliant and a line cord between the modem and the telephone network with a minimum of 26AWG.
The REN is used to determine the number of devices that you may connect to your telephone line and still have all of those devices ring when your number is called. Too many devices on one line may result in failure to ring in response to an incoming call. In most, but not all,areas the sum of the RENs of all of the devices should not exceed five (5.0). To be certain of the number of devices you may connect to your line, as determined by the RENs, contact your local telephone company.
If this equipment causes harm to the telephone network, your telephone company may discontinue your service temporarily. If possible,they will notify you in advance. If advance notice is not practical they will
notify you as soon as possible. You will also be advised of your right to file a complaint with the FCC.
This fax modem also complies with fax branding requirements per FCC Part 68.
Your telephone company will probably ask you to disconnect this equipment from the telephone network until the problem is corrected and you are sure that the equipment is not malfunctioning. This equipment may not be used on coin service telephones provided by your telephone company. Connection to party lines is subject to state tariVs. Contact your state’s public utility commission,public service commission or corporation commission for more information.
This equipment includes automatic dialing capability. When programming and/or making test calls to emergency numbers:
■Remain on the line and briefly explain to the dispatcher the reason for the call.
■Perform such activities in oV-peak hours, such as early morning or late evening.
FCC rules prohibit the use of non-hearing aid compatible telephones in the following locations or applications:
■All public or semipublic coin-operated or credit card telephones.
■Elevators,highways, tunnels (automobile, subway, railroad or pedestrian) where a person with impaired hearing might be isolated in an emergency.
■Places where telephones are specifically installed to alert emergency authorities such as fire, police or medical assistance personnel.
■Hospital rooms, residential health care facilities, convalescent homes and prisons.
■Workstations for the hearing impaired.
■Hotel,motel or apartment lobbies.
■Stores where telephones are used by patrons to order merchandise.
■Public transportation terminals where telephones are used to call taxis or to rese rve lodging or rental cars.
■In hotel and motel rooms as at least ten percent of the rooms must contain hearing aid compatible
telephones or jacks for plug-in hearing aid compatible telephones which will be provided to hearing impaired customers on request.
DOC (INDUSTRY CANADA) NOTICES
Notice to Users of Radios and Television
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
CET appareil numérique de la class B respecte toutes les exigence du Réglement sur le matérial brouilleur du Canada.
Notice to Users of the Canadian
Telephone Network
The Canadian Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements. The Department does not guarantee the equipment will operate to the user’s satisfaction.
The LifeBook 700 Series notebook computers are supplied with an internal modem which complies with the Industry Canada certification standards for telecommunication network protection and safety requirements. Before connecting this equipment to a telephone line the user should ensure that it is permissible to connect this equipment to the local telecommunication facilities. The user should be aware that compliance with the certification standards does not prevent service degradation in some situations.
Repairs to telecommunication equipment should be made by a Canadian authorized maintenance facility. Any repairs or alterations not expressly approved by Fujitsu™ PC Corporation or any equipment failures may give the telecommunication company cause to request the user to disconnect the equipment from the telephone line.
The connecting arrangement code for this equipment is
CA11A.
The Load Number is 3.
The Load Number assigned to each telephone terminal device denotes the percentage of the total load to be connected to a telephone loop or circuit which is used by the device to prevent overloading. The termination on a loop may consist of any combination of devices such that the total of the load numbers of all devices does not exceed 100.
C A U T I O N
For safety, users should ensure that the electrical ground of the power utility, the telephone lines and the metallic water pipes are connected together. Users should NOT attempt to make such connections themselves but should contact the appropriate electric inspection authority or electrician. This may be particularly important in rural areas.
Avis Aux Utilisateurs Du Réseau
Téléphonique Canadien
L’étiquette canadienne Industrie Canada identifie l’équipement certifié. Cette certification signifie que l’équipement satisfait certaines normes de protection,d’exploitation et de sécurité des réseaux de télécommunications. Le département ne garantit pas le fonctionnement de l’équipement à la satisfaction de l’utilisateur.
La série LifeBook™ 500 possèdent un modem interne conforme aux normes de certification d’Industrie Canada pour protéger les réseaux de télécommunications et satisfaire aux normes
de sécurité. Avant de connecter cet équipement à une ligne téléphonique,l’utilisateur doit vérifier s’il est permis de connecter cet équipement aux installations de télécommunications locales. L’utilisateur est averti que même la conformité aux normes de certification ne peut dans certains cas empêcher la dégradation du service.
Les réparations de l’équipement de télécommunications doivent être eVectuées par un service de maintenance agréé au Canada. Toute réparation ou modification, qui n’est pas expressément approuvée par Fujitsu PC Corp.,
ou toute défaillance de l’équipement peut entraîner la compagnie de télécommunications à exiger que l’utilisateur déconnecte l’équipement de la ligne téléphonique.
Le code d’arrangement de connexion de cet équipement est CA11A.
Le numéro de charge est 3.
Le numéro de charge assigné à chaque terminal téléphonique indique le pourcentage de la charge totale pouvant être connecté à une boucle ou à un circuit téléphonique, utilisé par ce périphérique afin de prévenir toute surcharge. La terminaison d’une boucle peut être constituée de n’importe quelle combinaison de périphériques de sorte que le total de numéros de charge de tous les périphériques n’excède pas 100.
A V E R T I S S E M E N T
Pour assurer la sécurité, les utilisateurs doivent vérifier que la prise de terre du service d’électricité, les lignes téléphoniques et les conduites d’eau métalliques sont connectées
ensemble. Les utilisateurs NE doivent PAS tenter d’établir ces connexions eux-mêmes, mais doivent contacter les services d’inspection d’installations électriques appropriés ou un électricien. Ceci peut être particulièrement important en régions rurales.
UL NOTICE (FOR AUTHORIZED REPAIR TECHNICIANS ONLY)
CAUTION: For continued protection against risk of fire, replace only with the same type and rating fuse.
CAUTION:Danger of explosion if CMOS battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instruction.
WARNING: CMOS and NiCAD batteries may explode if mistreated. Do not recharge,disassemble or dispose of in fire.
T a b l e o f C o n t e n t s
T a b l e o f C o n t e n t s
PREFACE . . . . . . . . . . . . . . . . . . . . v
SECTION ONE |
|
SETTING UP YOUR |
|
LIFEBOOK 700 SERIES |
|
Unpacking. . . . . . . . . . . . . . . . . . . |
. 2 |
Overview of Features . . . . . . . . . . . . . . |
3 |
Component Identification . . . . . . . . . . . |
4 |
Top and Front Components . . . . . . . . . . |
6 |
Left Side Panel Components . . . . . . . . . . |
7 |
Right Side Panel Components . . . . . . . . . |
7 |
Rear Panel Components . . . . . . . . . . . . |
8 |
Bottom Components . . . . . . . . . . . . . |
10 |
Power Sources . . . . . . . . . . . . . . . . . |
10 |
Data Security . . . . . . . . . . . . . . . . . |
11 |
Starting Your Notebook for the First Time. . |
12 |
User Registration . . . . . . . . . . . . . . . |
14 |
Learning About Your Operating System |
|
and Application Software. . . . . . . . . . |
15 |
SECTION TWO
USING YOUR LIFEBOOK 700 SERIES
Display Panel . . . . . . . . . . . . . . . . . |
18 |
Adjusting the Keyboard Angle . . . . . . . . |
18 |
Status Indicator Panel . . . . . . . . . . . . . |
19 |
Power On . . . . . . . . . . . . . . . . . . . |
23 |
Power Off . . . . . . . . . . . . . . . . . . . |
24 |
Restarting the System . . . . . . . . . . . . . |
25 |
Fujitsu Welcome Center . . . . . . . . . . . . |
26 |
Batteries . . . . . . . . . . . . . . . . . . . . |
26 |
Integrated ErgoTrac Pointing Device . . . . . |
30 |
Using the Keyboard . . . . . . . . . . . . . . |
32 |
Volume Control . . . . . . . . . . . . . . . . |
34 |
Floppy Disk Drive . . . . . . . . . . . . . . . |
34 |
CD-ROM Drive . . . . . . . . . . . . . . . . |
36 |
Hard Drive . . . . . . . . . . . . . . . . . . . |
38 |
Power Management . . . . . . . . . . . . . . |
38 |
Internal Modem . . . . . . . . . . . . . . . . |
46 |
Infrared Port . . . . . . . . . . . . . . . . . . |
46 |
Pre-Installed Software . . . . . . . . . . . . . |
47 |
SECTION THREE
CONFIGURING YOUR
LIFEBOOK 700 SERIES
Boot Sequence . . . . . . . . . . . . . . . . . 52 Identifying the Drives . . . . . . . . . . . . . 52 BIOS Setup Utility. . . . . . . . . . . . . . . 53 Navigating Through the Setup Utility . . . . 55 Main Menu – Setting System Parameters . . 56 Advanced Menu – Setting Device Controls . 65 Security Menu – Setting Passwords. . . . . . 77 Power Savings Menu – Setting Power
Management Controls . . . . . . . . . . . 81 Boot Menu . . . . . . . . . . . . . . . . . . . 88 Exit Menu – Leaving the Setup Utility . . . . 90 Setting Up Your Save-To-Disk
File Allocation. . . . . . . . . . . . . . . . 93
ii
L i f e B o o k 5 0 0 S e r i e s f r o m F u j i t s u
T a b l e o f C o n t e n t s
SECTION FOUR |
|
USER INSTALLABLE FEATURES |
|
Multi-function Bay Devices . . . . . . . . |
. 97 |
PC Cards . . . . . . . . . . . . . . . . . . |
103 |
Parallel Port Devices . . . . . . . . . . . . |
105 |
Serial Port Devices . . . . . . . . . . . . . |
105 |
USB Devices. . . . . . . . . . . . . . . . . |
105 |
Microphone . . . . . . . . . . . . . . . . . |
105 |
Stereo Line In Devices . . . . . . . . . . . |
105 |
Headphones . . . . . . . . . . . . . . . . . |
105 |
Telephone Lines . . . . . . . . . . . . . . . |
106 |
Mouse or Keyboard. . . . . . . . . . . . . |
106 |
External Monitor . . . . . . . . . . . . . . |
106 |
Theft Prevention Lock . . . . . . . . . . . |
106 |
External Installation of the |
|
Floppy Disk Drive . . . . . . . . . . . . |
107 |
Memory Upgrade Module . . . . . . . . . |
108 |
Landock . . . . . . . . . . . . . . . . . . . |
111 |
Port Replicator . . . . . . . . . . . . . . . |
112 |
SECTION FIVE
TROUBLESHOOTING
Identifying the Problem . . . . . . . . . . . 118
Specific Problems . . . . . . . . . . . . . . 119 Power On Self Test Messages . . . . . . . . 138 Emergency CD-ROM
Tray Release . . . . . . . . . . . . . . . . 141 Modem Setup and Commands . . . . . . . 141 Restoring Your Pre-installed Software
from CD-ROM . . . . . . . . . . . . . . 141
SECTION SIX |
|
CARE AND MAINTENANCE |
|
Care and Maintenance . . . . . . . . . . . . |
144 |
Caring for Your Notebook . . . . . . . . . . |
144 |
Increasing Battery Life . . . . . . . . . . . . |
145 |
Caring for Your Batteries . . . . . . . . . . |
145 |
APPENDIX A SPECIFICATIONS |
|
Warranty . . . . . . . . . . . . . . . . . . . |
148 |
LifeBook™ 735Dx Specifications . . . . . . . |
148 |
LifeBook 755Tx Specifications . . . . . . . |
151 |
LifeBook 765Tx Specifications . . . . . . . |
154 |
Approvals . . . . . . . . . . . . . . . . . . . |
157 |
Popular Accessories . . . . . . . . . . . . . |
157 |
APPENDIX B GLOSSARY . . . . . . |
159 |
INDEX . . . . . . . . . . . . . . . . . . . 167
iii
P r e f a c e
L ifeB o o k 70 0 Se rie s f ro m F u jit su ™
P r e f a c e
PREFACE
The LifeBook 700 Series from Fujitsu™ PC Corporation is a powerful notebook computer. It is powered by an Intel Pentium® microprocessor with MMX™ technology, has a built-in color display, a CD-ROM drive and brings
the computing power of desktop personal computers (PCs) to a p ortable environment.
This manual explains how to operate your LifeBook 700 Series’ hardware and built-in system software. The LifeBook 700 Series is compatible with the IBM® PC AT. It comes with Windows® 95 pre-installed.
A LifeBook 700 Series is a completely selfcontained unit witha dual scan passive-matrix (DSTN) or an active-matrix (TFT) color LCD display. It has a powerful interface that enables it to support a variety of optional features. (Figure P-1.)
CONVENTIONS USED IN THE GUIDE
Screen examples in this manual are intended as examples only, and screen and file names may diVer in actual use.
Messages displayed by the LifeBook 700 Series appear in Courier type.
Example: Shutdown the computer?
Keyboard keys are shown in boldface
Helvetica type.
Example: Fn, F1, Esc, and Ctrl.
Pages with additional information about a specific topic are cross-referenced within the text. Example: (See page xx.)
P O I N T
The point icon highlights information that will enhance your understanding of the subject material.
C A U T I O N
The caution icon highlights information that is important to your safety, to the safe operation of your computer, or to the integrity of your files. Please read all caution information carefully.
vi
L i f e B o o k 7 0 0 S e r i e s f r o m F u j i t s u
L i f e B o o k 7 0 0 S e r i e s f r o m F u j i t s u
Figure P-1 LifeBook 700 Series
with Both Fujitsu and
Third Party Options
vii
S e c t i o n O n e
S etting Up Your LifeBook 700 Series
Unpacking . . . . . . . . . . . . . . . . . . . 2
Overview of LifeBook 700 Series Features . . . 3
Component Identification . . . . . . . . . . . 4
Top and Front Components . . . . . . . . . . 6
Left Side Panel Components . . . . . . . . . . 7
Right Side Panel Components . . . . . . . . . 7
Rear Panel Components . . . . . . . . . . . . 8
Bottom Components . . . . . . . . . . . . . 10
Power Sources . . . . . . . . . . . . . . . . 10
Data Security . . . . . . . . . . . . . . . . . 11
Starting Your Notebook for the First Time . . 12
User Registration . . . . . . . . . . . . . . . 14
Learning About Your Operating System
and Application Software. . . . . . . . . . 15
S e c t i o n O n e
Section One
SETTING UP YOUR LIFEBOOK 700 SERIES FROM FUJITSU
This section describes how to set up your
LifeBook 700 Series from Fujitsu. We strongly recommend that you read it before using your notebook – even if you are already familiar with notebook computers.
UNPACKING
When you receive your notebook,unpack it carefully, and compare the parts you have received with the items listed below.
For a standard configuration you should have:
■LifeBook 700 Series from Fujitsu. (Figure 1-1.)
■AC adapter with AC power cord (located in the accessories box). (Figure 1-2.)
■Modular Lithium ion battery (already installed in Multi-function Bay 1 of your notebook).
■Modular 20-speed maximum CD-ROM drive (already installed in Multi-function Bay 2 of your notebook).
■Modular 3.5" floppy disk drive (located in the accessories box). (Figure 1-4.)
■Device adapter for Multi-function Bay 2 (located in the accessories box.) (Figure 1-3.)
■RJ-11 cable (located in the accessories box).
■Getting Started Guide.
■User’s Guide.
■Microsoft Windows 95 Manual.
■Registration card and customer information pack.
■Recovery CD-ROM (located in the accessories box).
■Additional equipment and/or documentation depending on the option package you have purchased.
Figure 1-1 LifeBook 700 Series Notebook
Figure 1-2 AC Adapter Unit
2
Figure 1-3 Device Adapter for Multi-function Bay 2
Figure 1-4 Floppy Disk Drive
S e t t i n g U p Y o u r L i f e B o o k 7 0 0 S e r i e s
Once you have checked and confirmed that your notebook system is complete, connect the AC adapter and follow the instructions on page 12-14 to accept the conditions for using the
LifeBook 700 Series. When you have completed the Conditions of Use process please register your notebook. (See page 14.)
OVERVIEW OF LIFEBOOK 700 SERIES FEATURES
The LifeBook 700 Series is a compact, yet powerful notebook computer available with standard features including: (See Appendix A, pages 148-157, for detailed information on individual models.)
■133MHz,150MHz or 166MHz Intel Pentium processor with MMX technology.
■16MB or 32MB SDRAM standard, expandable to 80MB or 96MB.
■12.1" dual-scan (DSTN) or active-matrix (TFT) color display with 800 x 600 resolution.
■2MB EDO video RAM.
■Built-in 1.6GB, 2GB or 3.2GB hard drive.
L i f e B o o k 7 0 0 S e r i e s f r o m F u j i t s u
■Dual Multi-function bays which support the following:
■3.5" floppy disk drive (included with all models).
■20-speed maximum CD-ROM drive (included with all models) (for Bay 2 only).
■Optional second 3.2GB hard drive (for Bay 2 only).
■Lithium ion battery
(one included with all models).
■Optional second Lithium ion battery.
■Internal 56K fax/data/voice modem with built-in telephony and DSVD support.
C A U T I O N
Your internal modem is designed to allow faster downloads from K56flex compliant digital sources. Maximum achievable download transmission rates may not reach 56kbps and will vary with line conditions
3
S e c t i o n O n e
■Full audio and video features:
■16-bit SoundBlaster-compatible sound chip.
■3D-Stereo for multiple speaker effect.
■Zoomed Video support for full motion video acceleration.
■Built-in stereo speakers.
■Built-in mono microphone.
■Stereo line in jack.
■Stereo headphone jack.
■Microphone jack.
■Two Type II/one Type III PC Card slot.
■Fast IrDA (4Mbps) compatible infrared port for wireless data transfer.
■Integrated ErgoTrac pointing device for superb comfort and cursor control.
■External monitor support with simultaneous display capabilities.
■“No re-learning”, full-size keyboard with three dedicated Windows 95 keys.
■Hot swap connection for an external keyboard or an external mouse.
■USB device support.
■Bridge battery for warm-swapping capabilities for batteries.
■Standard pre-installed software:
■Microsoft Windows 95 operating system.
■LapLink for file transfers via modem, cable or infrared port.
■PC-Doctor for system diagnostics.
■SoftPEG from CompCore,an MPEG-1 video player.
■McAfee VirusScan for virus protection.
■ESS AudioRack for 3D-Stereo, audio CD and other audio controls.
■MegaPhone for telephone applications including fax,dialing, and speakerphone.
Figure 1-5 Top and Front Panel
■Some models may include additional software.
COMPONENT IDENTIFICATION
For detailed specifications on each model refer to Appendix A on pages 148-157.
4
ErgoTrac Pointing Device
Multi-function Bay 1
L i f e B o o k 7 0 0 S e r i e s f r o m F u j i t s u
S e t t i n g U p Y o u r L i f e B o o k 7 0 0 S e r i e s
Display Panel Latch
Display Panel
Status Indicator Panel |
|
|
Brightness Control |
Keyboard |
Contrast Control |
|
(Model 735Dx Only) |
|
Built-in Microphone |
|
Suspend/Resume button |
Closed Cover Switch
Multi-function Bay 2 |
Figure 1-6 LifeBook 700 Series with Display Open |
|
5
S e c t i o n O n e
TOP AND FRONT COMPONENTS
Display Panel Latch
This latch locks and releases the display panel. When the display panel is released it pops up slightly to make it easier to open. (Figure 1-6.)
Display Panel
This is a color LCD panel with back lighting for the display of text and graphics. (Figure 1-6.)
Brightness Control
The brightness control adjusts the overall intensity of the display panel back lighting.
(Figure 1-6.)
Contrast Control (Model 735Dx only)
The contrast control (located just below the brightness control) sets the ratio of the intensity of the light to dark areas of the display. (Figure 1-6.)
Built-in Microphone
The built-in microphone allows mono audio input to your notebook. (Figure 1-6.)
Status Indicator Panel
An LCD display of the status of the power state and source, Suspend mode,battery charge (battery in either Multi-function Bay), floppy disk drive activity, hard drive activity, CD-ROM drive activity, PC Card activity, CapsLock, NumLk and Scr Lk. (Figure 1-6.)
Suspend/Resume Button
The Suspend/Resume button allows you to suspend notebook activity without turning off the notebook power, and to return it to an active state. This feature saves power, and is particularly useful when the notebook is running only on battery power. (See pages 38-46 and 81-87 for more information on power management.) (Figure 1-6.)
C A U T I O N
Be sure you know which settings are active for your Suspend/Resume button before you use it because misuse can result in data loss. (See the Power Savings Menu of the BIOS setup utility, pages 81-87, for more information.)
Closed Cover Switch
The closed cover switch turns off the LCD back lighting when the display panel is closed, thus saving power. (Figure 1-6.)
Keyboard
A full-size keyboard with dedicated Windows 95 keys for input into the notebook.
(Figure 1-6.)
ErgoTrac Pointing Device
The ErgoTrac pointing device is a joystick-like cursor control system with two click buttons. (Figure 1-6.)
Multi-function Bay One
This bay accommodates:
■Lithium ion battery.
■3.5" floppy disk drive.
Multi-function Bay Two
This bay accommodates:
■ 20-speed maximum CD-ROM drive.
6
■Lithium ion battery mounted in the device adapter for Multi-function Bay 2 (a second battery can be purchased separately for a dual battery configuration).
■Optional second 3.2GB hard drive (which must be purchased separately).
■3.5" floppy disk drive mounted in the device adapter for Multi-function Bay 2.
C A U T I O N
Do not use your notebook with either of the Multi-function bays empty. It may damage your notebook.
L i f e B o o k 7 0 0 S e r i e s f r o m F u j i t s u
S e t t i n g U p Y o u r L i f e B o o k 7 0 0 S e r i e s
PC Card Eject Buttons |
|
RIGHT SIDE PANEL COMPONENTS |
||||
|
|
|
Theft Prevention Lock Slot |
|
||
|
|
|
This is a slot that allows you to attach a physical |
|||
|
|
|
lock down device. (Figure 1-8.) |
|
||
|
|
|
USB Port |
|
|
|
|
|
|
This port allows you to connect Universal Serial |
|||
PC Card Lock |
PC Card Slots |
Left Speaker |
Bus devices, such as external game pads, point- |
|||
Figure 1-7 LifeBook 700 Series Left Side Panel |
ing devices, keyboards and speakers. |
|
||||
|
|
|
(Figure 1-8.) |
|
|
|
LEFT SIDE PANEL COMPONENTS |
DC Power Jack |
|
|
|||
PC Card Slot |
|
|
|
|
||
|
|
The DC power jack allows you to plug in the |
||||
The PC Card Slot allows you to install two Type |
||||||
AC adapter or the optional auto/airline adapter. |
||||||
I or Type II PC Cards or one Type III PC Card. |
||||||
(Figure 1-8.) |
|
|
||||
(See pages 103-105 for more information on PC |
|
|
||||
|
|
|
||||
Cards.) The button to the left of the card slot |
Stereo Line |
External Floppy |
|
|||
locks the card(s) in place,and the buttons |
|
|||||
In Jack |
Disk Drive Port |
Theft Prevention |
||||
to the right of the slot eject the |
|
Headphone Jack Microphone |
Lock Slot |
|||
card(s) from the slot. (Figure 1-7.) |
|
Jack |
Power Switch |
|||
|
|
Volume |
|
|
||
Left Speaker |
|
Control |
|
|
||
|
|
|
|
|
||
The built-in dual speakers output |
|
|
|
|
||
stereo sound from the notebook. |
|
|
|
USB |
||
(Figure 1-7 and Figure 1-8.) |
|
PS/2 |
|
|||
|
|
Port |
||||
|
|
|
Port Port Cover |
Right Speaker DC Power Jack |
Figure 1-8 LifeBook 700 Series Right Side Panel
7
S e c t i o n O n e
Power Switch
This switch is the main power switch for your notebook. (Figure 1-8.)
Right Speaker
The built-in dual speakers output stereo sound from the notebook. (Figure 1-7 and Figure 1-8.)
External Floppy Disk Drive Port
A port for attaching an optional external floppy disk drive. This allows you to connect an optional separate floppy disk drive when the Multi-function bays are being used for other purposes. (Figure 1-8.)
PS/2 Port
The port allows you to connect an external PS/2 keyboard, mouse, or numeric keypad.
(Figure 1-8.)
Microphone Jack
The microphone jack allows you to connect an external mono microphone. (Figure 1-8.)
Stereo Line In Jack
The stereo line in jack allows you to connect an external audio source to your notebook,like an audio cassette player. This jack will not support an external microphone. (Figure 1-8.)
Headphone Jack
You can connect headphones or powered external speakers to the headphone jack. (Figure 1-8.)
Volume Control
The volume control is a knob which provides manual control of the sound level of all audio output from your notebook. (Figure 1-8.)
C A U T I O N
There are also software volume controls. The knob setting and the software settings will interact. Software volume off will override the knob setting and the software volume setting will control the maximum knob setting. (See Volume Control on page 34 for more information.)
RJ-11 Jack
Docking Port
Serial Port
Parallel Port
External
Monitor Port
Slide Panel
Connector Cover
Infrared Port
Figure 1-9 LifeBook 700 Series Rear Panel
REAR PANEL COMPONENTS
RJ-11 Jack
This is the jack for attaching a telephone line to the internal modem. This jack can be used with the connector cover closed and the sliding panel in the connector cover slightly opened for added convenience. (Figure 1-9.)
8
C A U T I O N
The internal modem is not intended for use with Digital PBX systems. Do not connect the internal modem to a digital PBX as it may cause serious damage to the internal modem or your entire notebook. Consult your PBX manufacturer’s documentation for details. Some hotels have Digital PBX systems. Be sure to find out BEFORE you connect your modem.
Docking Port
This port is for connection to an optional port replicator or docking station. The connector cover must be closed and the sliding panel fully opened to reveal the docking port and the RJ-11 jack when connecting a port replicator or a docking station. (Figure 1-9.)
S e t t i n g U p Y o u r L i f e B o o k 7 0 0 S e r i e s
C A U T I O N
The cover – which closes over the ports on the rear of the notebook – can be damaged if it is left open when the notebook is moved around.
L i f e B o o k 7 0 0 S e r i e s f r o m F u j i t s u
Infrared Port
The fast IrDA (4Mbps) compatible port allows you to communicate with another IrDA compatible infrared device without a cable.
(See pages 46-47 for more information.) (Figure 1-9.)
Serial Port
The serial port allows you to connect serial RS-232C devices, such as serial printers or serial scanners. (This is also sometimes referred to as a COM port.) (Figure 1-9.)
Parallel Port
The parallel port allows you to connect parallel devices, such as a parallel printer to your notebook. (This is also sometimes referred to as a LPT port.) (Figure 1-9.)
External Monitor Port
This port allows you to connect an external VGA or SVGA CRT monitor. (Figure 1-9.)
Docking Alignment |
Tilt |
|
Docking Alignment |
|||
Receptacle |
Adjustment |
|
Receptacle |
|||
|
|
Feet |
|
|
|
|
|
|
|
|
|
|
|
Memory |
|
|
|
|
Main Unit |
|
Upgrade |
|
|
|
|
and |
|
Compartment |
|
|
|
|
Configuration |
|
|
Multi-function Bay 2 |
|
|
Label |
|
|
|
|
|||||
|
Multi-function Bay 1 |
|||||
Multi-function Bay 2 |
|
|
Multi-function Bay 1 |
|||
Release Button |
|
|
Release Button |
Figure 1-10 LifeBook 700 Series Bottom
9
S e c t i o n O n e
BOTTOM COMPONENTS
Tilt Adjustment Feet
These are a pair of feet which flip down and hold the back of the keyboard approximately
6° higher than the front when resting on a flat surface. They are designed to make using your notebook keyboard more comfortable.
(Figure 1-10.)
Main Unit and Configuration Label
This label shows the model number and other information about your notebook. In addition the configuration portion of the label has the serial number and manufacturer information that you will need to give your support representative so that he or she can help you. It identifies the exact version of various components of your notebook. (Figure 1-10.)
Memory Upgrade Compartment
This compartment houses the memory upgrade module which allows you to expand the system memory capacity of your notebook. (See pages 108-110 for more information on installing added memory capacity.) (Figure 1-10.)
Multi-function Bay 1 Release Button
This is the release to allow removal and installation of devices in the Multi-function Bay 1. (Figure 1-10.)
Multi-function Bay 1
This compartment is accessed from the front of your notebook. (See Figure 1-6 on page 5. )
Multi-function Bay 2 Release Button
This is the release to allow removal and installation of devices in the Multi-function Bay 2. (Figure 1-10.)
Multi-function Bay 2
This compartment is accessed from the front of your notebook. (See Figure 1-6 on page 5. )
POWER SOURCES
Your notebook has four possible power sources: the primary Lithium ion battery; an optional dual Lithium ion battery configuration; the AC adapter; or an optional auto/airline adapter.
Figure 1-11 Connecting the AC Adapter
Connecting the Power Adapters
The AC adapter or an optional auto/airline adapter provides power for operating your notebook and charging the batteries.
(Figure 1-11.)
To Connect the AC Adapter
1.Plug the DC Output cable of the AC adapter into the DC Power jack on the right side panel of your notebook.
2.Plug the AC adapter into an AC electrical outlet.
10
To Connect the Optional Auto/airline Adapter
1.Plug the DC Output cable into the DC Power jack on the right side panel of your notebook.
2.Plug the auto/airline adapter plug into the cigarette lighter of a car or other vehicle with the ignition key in the On or the Accessories position or into the DC Power jack on an airplane seat.
To Switch From AC Adapter Power
To Battery Power
1.Be sure that you have at least one charged battery installed.
2.Remove the AC or auto/airline adapter.
S e t t i n g U p Y o u r L i f e B o o k 7 0 0 S e r i e s
C A U T I O N
The primary Lithium ion battery is not charged when you purchase your notebook. Initially you will need to connect the AC adapter or the auto/airline adapter to use it. If you purchase a second Lithium ion battery it will not be charged when you get it. You will need to charge it prior to use. It can take up to three (3) hours to charge a single battery if your notebook is turned off or is in Suspend mode. If your notebook is in use it can take up
to nine (9) hours or more to charge a single battery.
DATA SECURITY
Your LifeBook 700 Series has a built-in hardware control password security feature that allows you to protect the data stored in the notebook from unauthorized access. Your operating system and some applications have
L i f e B o o k 7 0 0 S e r i e s f r o m F u j i t s u
software control password security features that allow you to protect all or portions of the data stored in the notebook from unauthorized access.
Hardware Data Security Features
When you are using your notebook built-in hardware control password to gain access to the notebook the actual password will not ap pear on the screen. This is a safety precaution. The hardware control security parameters are set from the BIOS setup utility. (See Security Menu on pages 77-80 for more information on setting and clearing passwords and enabling and disabling built-in security features.)
Software Data Security Features
The operating system and some applications have security features that are independent of the built-in hardware protection features that are controlled from the BIOS. See your software documentation for more information about these features.
11
S e c t i o n O n e
C A U T I O N
Make sure you memorize your passwords, both hardware and software.
If you forget, you may not be able to use the notebook, and you will have to contact your service provider and arrange to have them reset the hardware system password. See your software documentation for what to do if you forget your software security password(s).
C A U T I O N
Software security feature passwords may not be the same as the hardware security passwords. Be sure you know which features are controlled from software and which from hardware or you may lock yourself out of your own data or lock up your hardware and not be able to operate your notebook.
STARTING YOUR NOTEBOOK FOR THE FIRST TIME
Booting the System
The first time that you turn on your notebook you will need to attach your AC adapter because the battery is not charged when you get your machine. We strongly recommend that you not attach any other external devices and do not put any CD or floppy disk in your drives until you have gone through the initial p ower on sequence.
When you turn on your notebook for the first time it will display a Fujitsu logo on the screen. If you do nothing the system will read the hard drive for the operating system software, flash the notebook configuration information on the screen, and then the Windows 95 Setup Wizard Screen will appear. (See Power On on pages 2324 for additional help.) You will then be stepped through the condition of use process. You must complete this initial process before you will be able to use your notebook. (If you wish to access the BIOS setup utility before you go through the condition of use process you must
press the F2 key while the Fujitsu logo is still visible. If you press the Esc key while the Fujitsu logo is still present you will get a dialog box which will allow you to select which drive is to be used for finding the operating system.) If you turn off the power without using the o n screen Cancel button you will get an error message when you start your notebook again.
Conditions of Use Process
The first time you start your notebook you must confirm your acceptance of the copyright limitations for your pre-installed software. After you complete the Condition of Use process these screens will not appear again. There are 6 screens to read carefully and respond to.
You cannot use your notebook until this Condition of Use process is completed. The bottom of each screen has a <Back button, a Next> Button and a Cancel button which are activated by the integrated ErgoTrac cursor control and button click. The <Back button will return you to the previous screen. The Next> button activates any choices or
12
information you have entered and takes you on to the next screen. The Cancel button allows you to stop the setup process.
If you stop the process your notebook will start up at the b eginning of the Windows 95 Setup Wizard.
The screens you will be required to respond to are described with the required action.
User Information
Fill in your name and your company name as you want the software licensed. To step from the name blank to the company blank press the Tab key. When the information has been entered click on the Next> button. You will not be allowed to continue until you makean entry.
License Agreement
Read the agreement carefully. You can scroll through the text using the integrated ErgoTrac pointing device to activate the scroll bar or use the up arrow ’ and down arrow ‘ keys to move up and down the text one line at a time, or use the Page Up and Page Down keys to
S e t t i n g U p Y o u r L i f e B o o k 7 0 0 S e r i e s
move the text one screen at a time. When you finish reading you must point and click to accept or reject the terms of the agreement and then click on the Next> button.
L i f e B o o k 7 0 0 S e r i e s f r o m F u j i t s u
Start Wizard
The Start Wizard screen will appear if you have entered a valid product code. When you click on the Finish button the display will flash various screens as the system identifies what hardware is installed and runs a virus check.
P O I N T
If you reject the terms of the license agreement you will be asked to review the license agreement for information on returning Windows 95 or to shut down your notebook.
Certificate of Authenticity
Look in the box that your notebook came in and you will find a Windows 95 Certificate of Authenticity shrink wrapped with the Windows 95 Users manual.On the certificate you will find a bar-code with a number above it. This is your product code and the number you should enter on the Certificate of Authenticity screen. When you have entered the number exactly as shown then click on the Next> button.
Time Zone
When your notebook has completely identified all of the installed hardware it will display a dialog box for entering which time zone you wish to set the clock to.
Windows Messaging
Once you have selected a time zone you will see a screen announcing that Windows messaging is being set up.
Printer Setup
When the messaging setup is complete a dialog box will appear for selecting which printer is to be attached to your notebook. You do not have to select a printer at this time. If you do not wish to select a printer, click on the Cancel button. If you do wish to select a printer click on the Next button and answer the questions.
13
S e c t i o n O n e
Welcome to Windows 95
Once you have completed the printer setup or chosen not to set up a printer at this time you will see the Welcome screen for Windows 95.
You can choose: Windows Tour; What‘s New; Online Registration; or Close. You are now in the Windows 95 operating system and the Condition of Use process will not be repeated.
P O I N T
You will find a Recovery CD-ROM packet in your accessories box. Please store the packet in a safe place in case there is a loss of data and it becomes necessary
to re-install your operating system and and/or application programs.
(See Restoring Your Pre-installed Software from the Recovery CD-ROM on page 141.)
USER REGISTRATION
There are three ways to register your notebook.
1.The registration card provided in the box with your LifeBook 700 Series that can be
filled out and mailed.
2.A registration form behind one of the Fujitsu Welcome Center icons that can be filled out on your notebook and sent in a variety of ways,including printing and mailing, faxing or e-mailing.
3.Telephone registration by calling the Fujitsu PC service and support line at 1-800-8FUJITSU (1-800-838-5487).
C A U T I O N
There are two Fujitsu Welcome Center icons on your notebook desktop, one for use if you have a model 735Dx and the other for use if you have a model 755Tx or a model 765Tx. Be sure to use the correct icon or your product registration may be invalid. Choose carefully as using the incorrect form will invalidate your registration and may prevent you from receiving technical support.
14
L i f e B o o k 7 0 0 S e r i e s f r o m F u j i t s u
S e t t i n g U p Y o u r L i f e B o o k 7 0 0 S e r i e s
LEARNING ABOUT YOUR OPERATING SYSTEM AND APPLICATION SOFTWARE
Tutorials
All operating systems and most application software have tutorials built-in. We highly recommend that you step through your tutorial before you use an application even if you are familiar with the same application on a different machine,an earlier version of the application, or a similar product.
Manuals
In the accessories box you will find manuals for
Windows 95 and other pre-installed software.
Software manuals of pre-installed software that are not in the accessories box are available online. See the help screens of your preinstalled software. We recommend that you review these manuals for general information on the use of these applications and to get a basic understanding of what is covered in the manual,and how it is organized,should questions arise as you use the applications.
15
S e c t i o n T w o
Using Your LifeBook 700 Series from Fujitsu
Using Your LifeBook 700 Series from Fujitsu |
. |
18 |
|
Display Panel . . . . . . . . . . . . . . |
. . |
. |
18 |
Adjusting the Keyboard Angle . . . . . |
. . |
. |
19 |
Status Indicator Panel. . . . . . . . . . |
. . |
. |
19 |
Power On . . . . . . . . . . . . . . . |
. . |
. |
23 |
Power Off . . . . . . . . . . . . . . . |
. . |
. |
24 |
Restarting the System . . . . . . . . . |
. . |
. |
25 |
Fujitsu Welcome Center . . . . . . . . |
. . |
. |
26 |
Batteries . . . . . . . . . . . . . . . . |
. . |
. |
26 |
Integrated ErgoTrac Pointing Device . . |
. . |
. |
30 |
Using the Keyboard. . . . . . . . . . . |
. . |
. |
32 |
Volume Control . . . . . . . . . . . . . |
. . |
. |
34 |
Floppy Disk Drive . . . . . . . . . . . . |
. . |
. |
34 |
CD-ROM Drive . . . . . . . . . . . . . |
. . |
. |
36 |
Hard Drive . . . . . . . . . . . . . . . |
. . |
. |
38 |
Power Managment . . . . . . . . . . . |
. . |
. |
38 |
Internal Modem . . . . . . . . . . . . |
. . |
. |
46 |
Infrared Port . . . . . . . . . . . . . . |
. . |
. |
46 |
Pre-installed Software . . . . . . . . . |
. . |
. |
47 |
S e c t i o n T w o
SECTION TWO
USING YOUR LIFEBOOK 700 SERIES FROM FUJITSU
This section describes the indicators, buttons, connections and operating modes of your LifeBook 700 Series and their use.
DISPLAY PANEL
Opening the Display Panel
Lifting the latch releases the top of the display panel from the front of the notebook body. When the display panel is released it pops up slightly to make it easier to open.Lift the display panel backward until the screen is at a comfortable viewing angle. (Figure 2-1.)
Adjusting the Display Panel
When you turn on your notebook, you may want to adjust the brightness level of the screen for best visibility. To do this, adjust the brightness control slider on the right side of the display panel. (Figure 2-2.) You may need to adjust the brightness periodically for different
Figure 2-1 Opening the Display Panel
operating environments.(For model 735Dx only, you may also adjust contrast with a contrast control slider that is just below the brightness control.)
Brightness Control |
Brighter |
|
|
||
Contrast Control |
Less Bright |
|
(Model 735Dx Only) |
||
Higher Contrast |
||
|
||
|
Less Contrast |
P O I N T
The higher the brightness level, the more
power the notebook will consume and Figure 2-2 Display Adjustments the faster your batteries will discharge.
For maximum battery life, make sure that the brightness is set as low as possible.
18
ADJUSTING THE KEYBOARD ANGLE
On the bottom of your notebook,near the back,are a pair of feet which flip down and hold the back of the keyboard about 6° higher than the front when resting on a flat surfa ce. They are designed to make it more comfortable to use the keyboard with your notebook. The feet must be folded flat against the bottom of the notebook when opening or using the CDROM drive or it will not open or operate properly. (Figure 1-10 on page 9)
C A U T I O N
Do not operate your CD-ROM drive or attempt to open the tray unless your notebook is sitting on a flat surface and the adjustment feet are folded against the bottom of the notebook. Using a CD-ROM drive when it is not level may damage the drive or prevent proper operation.
L i f e B o o k 7 0 0 S e r i e s f r o m F u j i t s u
U s i n g Y o u r L i f e B o o k 7 0 0 S e r i e s
C A U T I O N
When you are not using the adjustment feet be sure that they are folded flat against the bottom of the notebook. They could be broken off or injure someone if not used properly.
STATUS INDICATOR PANEL
The Status Indicator panel is located in the recess just above the keyboard. (Figure 2-3.) The appropriate indicators become visible as you use your notebook.
Power Indicator
The Power indicator tells you when the system is operational. It is on steady when there is power to your notebook,and blinks when the system is in Suspend mode. It goes off when the system has entered Save-to-Disk mode,has entered the Windows 95 pseudo-off state, or the power is turned off from the power switch.
P O I N T
When your notebook has been shut down from Windows 95, it is not the same as turned off from the power switch. It is in a pseudo-off state, with all applications closed, but can be turned on by pressing the Suspend/Resume button. It is drawing some current in the pseudo-off state.
C A U T I O N
Your notebook’s power switch must be turned off to prevent all current draw.
19
S e c t i o n T w o
Power |
Battery |
Battery |
CD-ROM |
Floppy Disk |
PC Card |
NumLk |
Scr Lk |
|
|
Identifier |
Charging |
Drive Access |
Drive Access |
Slot Identifier |
|
|
|
|
AC Adapter |
Battery |
Hard Drive Access |
PC Card Access |
CapsLock |
|||
|
|
Level |
|
|
|
|
|
|
Figure 2-3 Status Indicator Panel
AC Adapter Indicator
The AC Adapter indicator tells you whether the system is operating on an AC or auto/airline adapter, or batteries alone. The indicator is On when either of the adapters is active and Off when power comes from the batteries alone. If a battery is charging, the Power Adapter indicator is active regardless of the setting of the power switch. The AC Adapter indicator is also active in the Windows 95 pseudo-off state, regardless of the battery status. If there is no battery charging, and the power switch is Off,then the AC Adapter indicator and the Battery indicators will all be Off.
Battery Indicators
The two sets of battery indicators show whether or not the primary Lithium ion battery and/or the optional second Lithium ion battery are installed,and indicate the condition of each. (Figure 2-3.) Battery 1 is the Lithium ion bat - tery which is installed in Multi-function Bay 1 and Battery 2 is the Lithium ion battery which is installed in Multi-function Bay 2. The battery indicators are displayed only for a battery which is installed.
20