Page 1
SAFETY CAUTIONS
While FUJITSU COMPONENT has sought to ensure the accuracy of all information in this document,
FUJITSU assumes no liability to any party for any damage caused by any error or omission contained in this manual, its
updates or supplements, whether such errors or omissions result from negligence, accident, or any other cause. In
addition, FUJITSU COMPONENT assumes no liability with respect to the application or use of any product or system in
accordance with descriptions or instructions contained herein, including any liability for incidental or consequential
damages arising therefrom.
In order to protect the users and other persons from the risk of injuries and to avoid damage to properties, the safety
precautions that should be strictly observed are indicated below:
If this product should malfunction, immediately stop using it, and contact your sales representative.
Danger
Indicates an imminent risk of causing severe personal injury or death
if not used properly.
This level is not described in this document.
Warning
Indicates possibility of causing severe personal injury or death if not used
properly.
Caution
Indicates that a minor or some personal injury may occur or that the product
itself or other user's property may be damaged.
Indicates an action that must not be performed.
Detailed description is on the side of this symbol.
Indicates danger, warning and caution.
Detailed description is on the side of this symbol.
Indicates an action that must be performed.
Detailed description is on the side of this symbol.
General Cautions
Warning
Break-
down
-
Do not use in the environment with corrosive gas or salt wind is present.
Failure to observe this may cause failure.
Modify
-
Do not modify or disassemble.
Failure to observe this may cause fire, explosion or breakdown.
Fire
-
Do not burn or heat.
Failure to observe this may cause smoke, fire or breakdown.
Fire
-
Do not pour water.
This equipment is not waterproof. Failure to observe this may cause fire, explosion or
breakdown.
Fire
-
Do not use or store the equipment in a hot environment.
Failure to observe this may cause smoke, fire or breakdown.
Fire
-
Do not throw or drop.
Failure to observe this may cause fire, explosion or breakdown.
Fire
-
Do not use with wet hands. Do not drip or drop liquid such as drinking water, clips or other foreign matter.
Failure to observe this may cause fire or electric shock.
Fire
-
In the event of heat, unusual smells, smoke or excessive noise while using the product, please stop using it
immediately. Unplug the power cable, remove the battery.
Failure to observe this may cause fire.
Caution
Injury
-
Do not use while driving a vehicle or walking.
Failure to observe this may cause traffic accidents and injuries.
Break-
down
-
Do not use the printer near the equipment that generates large radiation noise, such as a high voltage device and a
large motor.
Failure to observe this may cause malfunction or breakdown.
Fire
-
Do not use under direct sunlight or dusty environment that contains the oil and iron.
Failure to observe this may cause heat, fire or failure.
Fire
-
If charging is not completed within the specified time, unplug the charger and stop charging.
The battery may leak by overcharging.
Fire
-
Do not apply force to the cable.
Failure to observe this may cause fire or electric shock.
Break-
down
-
Keep the power line away from other devices which generate noise. (Large motor etc.)
Failure to observe this may cause malfunction or breakdown.
Failure
- Before using this product,
be sure to read complete user's guide.
It may cause the failure by incorrect use.
Page 2
Printer
Warning
Accident
-
Do not use the printer in a location where radio wave generation is prohibited.
Might cause accidentally a malfunction of the instrument.
Burn
-
During or immediately after operation, do not touch the print head, the support plate and the motor. Heat is not
immediately discharged.
Failure to observe this may cause burn injury.
Fire
-
Do not put metal objects or flammable objects into the gaps of the case.
Failure to observe this may cause fire or electric shock.
Burn
-
Surely turn off the printer's power and confirm that the printer head is sufficiently cooled down before cleaning.
Failure to observe this may cause burn injury.
Caution
Injury
-
Never insert fingers or metal into the paper insertion and/or eject slots of the paper cutter.
Failure to observe this may cause equipment failure or injury.
Injury
-
Be careful not to get a hand or hair caught in moving parts.
Failure to observe this may cause burn injury.
Battery
Warning
Break-
down
-
Do not use the battery for other device or purpose.
Failure to observe this may cause destruction.
Modify
-
Do not disassemble the battery.
Failure to observe this may cause heat, fire or destruction.
Fire
-
Only use the specified battery.
Failure to observe this may cause fire or electric shock.
Fire
-
Only charge the battery with the charger specified.
Failure to observe this may cause fire or destruction.
Fire
-
Do not short-circuit the electrode of the battery.
Failure to observe this may cause heat, fire or destruction.
Fire
-
Do not solder the terminal of battery.
Failure to observe this may cause heat, fire or destruction.
Fire
-
Do not make impact or pressure on battery.
Failure to observe this may cause heat, fire or destruction.
Caution
Break-
down
-
Remove the battery if the printer is not expected to be used for long period.
Failure to observe this may cause deterioration of the battery and over-discharge state.
Break-
down
-
Turn off the power of the printer before removing the battery.
Failure to observe this may cause destruction.
AC adapter
Warning
Break-
down
-
Do not use the AC adapter for any other devices or purposes.
Failure to observe this may cause damage to the printer and/or battery.
Fire
-
Only connect the AC adapter to the specified voltage and/or frequency.
Failure to observe this may cause fire or electric shock due to cable disconnection.
Fire
-
Only use the specified AC adapter.
Failure to observe this may cause heat, fire or destruction.
Caution
Fire
-
Please connect or remove the AC adapter after the power is turned off.
Failure to observe this may cause breakdown.
Break-
down
-
If you do not use the AC adapter for a long time, please unplug the power cable.
Failure to observe this may cause electric shock or fire due to dust and moisture.
Warning Label of Product
This product comes with the following warning label.
This label must not be peeled off or erased from the display.
Moreover, please contact the distributor when the label is difficult to see due to dirt, scratching etc.
Warning display Content
HEAD
!"
Do not touch the printer head and its support plate directly, because it
becomes hot during printing.
GEAR & HOOK
#$%&!'
Pay attention that fingers and hair do not get caught in moving parts such
as a gear or hook.
CAUTION
()
Please do not touch the cutter blade when you exchange the paper roll
because it may cause an injury.
Use in High Safety Applications
This product is designed, developed and manufactured for general use, such as standard industrial, general, personal and
household use. This product is not designed, developed and manufactured for “high safety applications”, such as an application
which requires extremely high safety, which may have a serious effect on society, expose individuals to serious danger (death,
personal injury, severe physical damage or other loss), if extremely high safety is not assured (including, without limitation, nuclear
reaction control in a nuclear facility, aircraft automatic flight control, air traffic control, transport control in a mass transport system,
medical equipment for life support, missile launch control of a weapons system), or an application which requires extremely high
reliability (including, without limitation, submarine relay, space satellite).
If you wish to use this product in an environment that requires high safety, please consult with our sales representatives.
Warranty
We shall not be responsible for any failure caused by wrong operation or usage in the wrong environment.
Moreover, we cannot be responsible for the loss, the passive damages or the claim by a third party, even if it is caused
by use or failure of this product.
In addition, this product’s range of failure will never exceed the amount of money paid for it.
Page 3
For USA
Federal Communications Commission Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment. (Example- use only shielded interface cables when
connecting to computer or peripheral devices).
For CANADA
Industry Canada Statement
This equipment complies with Industry Canada RSS210 rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may cause undesired operation.
For EU
CE Marking
This product is in conformance with the requirements of European Council Directive: R&TTE Directive 1995/5/EC
Applied standards:
- EN 60950-1
- EN 300 328
- EN 301 489-1
- EN 301 489-17
- EN 50581
QUICK START GUIDE
It explains the main functions and the usage of this product.
Before using this product, please download complete User's Guide from our website and be sure to read it.
URL : http://www.fcl.fujitsu.com/en/support/thermal-printers/
If you have a difficulty to get the User’s Guide, please contact our distributor.
(1) List of packaged items
At first, please make sure that printer, battery, AC adapter and safety precautions are included.
If one is missing, please ask the distributor.
Printer Battery AC adapter Safety Cautions
(This Document)
AC Cable
Roll Paper
(2) Inserting the battery
Please put the battery into the printer by the following procedures.
1) Slide the cover lock and lift the
battery cover to open.
2) Set the battery and slide to
battery terminal side for battery
locking.
3) Close the battery cover.
Cover close
Battery Cover
Cover L
ock
Cover open
Battery lock
Page 4
(3) Charging the battery
Please charge the battery by the following procedures.
1) Connect the AC cable with
the AC adapter, and connect
the AC plug to an outlet.
2) Open the jack cover . Insert
DC output terminal of AC
adapter into the AC adapter
jack.
3) Hang the hook of the jack
cover to the hole of AC jack,
and push center of the jack
cover to close.
(4) Setting the paper
Please set the paper by the following procedures.
1) Push up the cover open lever
to open the paper cover.
2) Set the paper in the printer. 3) Put out the edge of the paper
and close the paper cover. Push
center of the paper cover firmly
when closing.
(5) Turning printer on
Please keep pushing the POWER Switch until the Status LED turns green.
(6) Printing
Please print by using the application in your terminal such as tablet PC.
(7) Turning printer off
Please keep pushing the POWER switch until the Status LED turns off.
"Made for iPod", "Made for iPhone", and "Made for iPad" mean that an electronic accessory has been designed to
connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the operation of this device or its compliance with safety and
regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless
performance.
Apple, iPod, iPhone and iPad are are trademarks of Apple Inc, registered in the U.S. and other countries.
All Rights Reserved, Copyright © FUJITSU COMPONENT LIMITED 2014
NA02266-L048RS 02
POWER Switch
Status LED
Operation Panel
Thermal Paper
(Thermosensitive Side)
Cover open lever
AC cable AC adapter
Technical Support
FUJITSU COMPONENT LIMITED (Japan)
Global Marketing Dept.2
Tel: +81-3-5449-7014 Fax: +81-3-5449-2628
E-mail:
promothq@fcl.fujitsu.com
FUJITSU COMPONENTS EUROPE, B.V. (EU)
European Headquarters
Tel: +31-23-556-0910 Fax: +31-23-556-0950
FUJITSU COMPONENTS AMERICA, INC. (USA)
North American Headquarters
Tel: +1-(408)745-4900 Fax: +1-(408) 745-4970
Jack
Cover
AC adapter Jack
Loading...