Fujitsu FTP-634MCL001, FTP-634MCL002 User Manual

BATTERY DRIVE, FTP-604 Series
3” TYPE MECHANISM AND INTERFACE BOARD

FTP-634MCL001/002/FTP-624DCL/DSL002

■ OVERVIEW

FTP-634MCL/FTP-624DCL/DSL Series is a high speed line
thermal printer driven by battery, printing on 3-inch wide paper
(80 mm/ 85 mm).

The printer is compact and lightweight, and the design allows
easy head maintenance, head cleaning and head
replacement.

This printer is suitable for a variety of applications, such as
hand held terminals, POS terminals, ticket machines, coupon
machines, label printers, etc.

FTP-634MCL001

■ HIGHLIGHTS

• High speed printing

It can print at 50 mm/s (400 dotlines/s) maximum by using
Fujitsu

• Compact and lightweight

This printer has a low profile of only 20 mm, and a light
weight of approximately 95g.

• Low power consumption

The peak current for head drive is only 3.5 A (8.5 VDC, 128
dots on).

• Easy head access

It is designed for easy head cleaning and head replacement.

• Paper auto loading function

Thermal paper can be loaded without head-up lever
operation.

• UL recognized

File No. E171434

Components' unique head drive control.

FTP-624CU102

FTP-624DCL/DSL002

1

■ DESIGNATION

FTP-634MCL001/002/FTP-624DCL/DSL002

Part numberItem

Printer mechanism FTP-634MCL001/002*

Interface Board

LSI Micro Controller Unit FTP-624CU102

Cables

*1: 001 is for front paper insertion (curl path) and 002 is for rear paper insertion (straight path).
*2: 002 supports ANK, 102 supports ANK and Kanji.
*3: 002 supports ANK, 103 supports ANK and Kanji.

Centronics
RS-232C

Thermal head cables FTP-624Y002*1, FTP-624Y003
Parallel interface cable FTP-441Y201
Serial interface cable FTP-624Y301
Power cables (logic, head and motor) FTP-621Y401, FTP-621Y601

FTP-624DCL002*

FTP-624DSL002*

■ GENERAL SPECIFICATIONS

SpecificationsItem

Part number FTP-634MCL001/002
Printing method Thermal-sensitive line dot method
Dot structure 576 dots/line

1

2

3

Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 72 mm
Paper width (MCL001) 80 mm
Paper width (MCL002) 85 mm
Paper thickness 60 to 100 µ m*
Number of columns 72 columns/line (16 × 8 dot font)
Maximum printing speed

Character types ASCII : 31

Character composition, dimensions (H×W),
Number of characters

Interface Centronics / RS-232C

400 dotlines/s (50 mm/s)
[Condition] 1 ply, printing on high sensitive thermal paper,
8 columns of “H” /line, double density 16 × 8 dot font,
room temperature, 8.5 VDC drive

JIS ANK : 128 International : 195

24 × 12 dots, (3.0 × 1.5 mm), 48 columns
16 × 8 dots, (2.0 × 1.0 mm), 72 columns
16 × 16 dots, (4.0 × 2.0 mm), 36 columns
24 × 24 dots, (6.0 × 3.0 mm), 24 columns

1

(Continued)

2

(Continued)

FTP-634MCL001/002/FTP-624DCL/DSL002

SpecificationsItem

For head

Power
supply

Dimensions

Weight (Mechanism) approximately 95 g
Expected life Mechanism Pulse durability: 1 × 108 pulse/dot (using Fujitsu Takamisawa's standard

Environmental
conditions

For motor

For logic

Mechanism 108 (W) × 46 (D) × 20 (H) mm (excluding lever and knob diameter)
Interface board 131 (W) × 89(D) × 24 (H) mm

Operating temperature 0 to +50°C*
Operating humidity 20 to 85% RH (no condensation)
Storage temperature –20 to +60°C
Storage humidity 5 to 95% RH (no condensation)
Head temperature By thermistor (applied energy control, abnormal temperature detection)

Voltage: 4.2 to 8.5 VDC (equivalent to 2 Lithium lon batteries)
Peak current: approx. 3.5 A (conditions: room temp., 7.2VDC, 128 dots on)

Voltage: 4.2 to 8.5 VDC (equivalent to 2 Lithium lon batteries)
Peak current: approximately 0.8 A (conditions: room temperature, 7.2VDC)

Voltage: 5 V DC± 5%
Current: 0.2 A maximum

driving method)

Wear resistance: 50 km (at 12.5% print ratio)

2

Detection Paper out/Mark detect By photointerrupter

Head-up By microswitch

For front insertion use (80 mm width) : FTP-030PU001
For rear insertion use (85 mm width) : FTP-030P0020, FTP-030PG106

Recommended thermal sensitive paper

In Europe (80 mm width) : FTP031P0060-45

· Oji Paper : PD160R, PD170R, PD150R

· NIPPON Paper : TF50KS-E4, TF60KS-E, TF50KS-E

· MITSUBISHI Paper Mills : P220VBB-1, AFP-235

*1: There may be exceptions.
*2: Guarantee +5°C to +40°C.

3

■ DIMENSIONS

Printer mechanism

20.1

1.5

45.5

FTP-634MCL001/002/FTP-624DCL/DSL002

PAPER INSERTION

(MCLOO1)

HEAD UP LEVER (AT HEAD DOWN)

CENTER OF PAPER

(7.5)

PAPER INSERTION

(MCLOO2)

2-MOUNTING HOLE

HEAD CONNECTOR

(150)

50.9 57.0
(107.9)

±1

Unit: mm

4

Interface board

FTP-634MCL001/002/FTP-624DCL/DSL002

33.0

5.1

15.2

130.8

120.7

105.4

71.1

5.1

88.9

78.7

39.4

5.15.1

5.1

17.0

5.0

CN9

CN3

CN10

CN11

59.7

CN12

CN1

73.7

105.4

114.2

120.7

Mounting Height

Mounting Height

CN2

86.4

CN5

CN4

5.1

CN7

CN8

52.1

CN6

39.4

26.7

5.1

5.1

4-03.6

.6

* CN9 on FTP-624DSL only
** CN8, CN11, CN12 not used

Unit: mm

5

FTP-634MCL001/002/FTP-624DCL/DSL002

■ CONNECTOR PIN ASSIGNMENT FOR PRINTER MECHANISM

1. Thermal Head

Head side 1: B11B-PH-K-S-2.2 (J.S.T.) or equivalent
2: B10B-PH-K-S-2.2 (J.S.T.) or equivalent
Board side 1: PHR-11 (J.S.T.) or equivalent
2: PHR-12 (J.S.T.) or equivalent

Connector Thermal Head 1

.oNlangiStnemmoC

15BTS5langiselbanetnirP
26BTS6langiselbanetnirP
37BTS7langiselbanetnirP
48BTS8langiselbanetnirP

5KLCkcolcnoissimsnartataD
6TALlangisgnihctalatadtnirP
7NIDlangistuptuoatadtnirP
8DNGdnuorgdaeH
9DNGdnuorgdaeH

01HVdaehrofrewoP
11HVdaehrofrewoP

*1: Symbol: " " means a negative logic signal

Thermal head heat sink

Motor

1, 2, 3, ...............9, 10 1, 2, 3, ...............10, 11

Connector Thermal Head 2

.oNlangiStnemmoC

1HVdaehrofrewoP
2HVdaehrofrewoP
3DNGdnuorgdaeH
4DNGdnuorgdaeH
5*HT
61BTS1langiselbanetnirP
72BTS2langiselbanetnirP
83BTS3langiselbanetnirP
94BTS4langiselbanetnirP

01DDVcigolrofrewoP

1

Head up level

noitcetederutarepmeT

Connector Pin No.

3. Sensor connectors

Sensor : PHR-5 (J.S.T.) or equivalent
Board side : B5B-PH-K-S (J.S.T.) or equivalent

6

FTP-634MCL001/002/FTP-624DCL/DSL002

■ FUNCTION

metImetI
.1noitcnuftnirptseT.8noitcnufgnivasrewoprotoM
.2noitcetedtuorepaP.9noitcnufnoitcetedkraM
.3noitceteddneraenrepaP.01noitcetedytilamronbanoitarepoUCM
.4noitcetedpudaeH.11noitcetorpecneuqesFFO/NOrewoP
.5noitcetedytilamronbaerutarepmetdaehlamrehT.21noitcetorptnerruc-revorotoM
.6noitcetedesuftuo-wolB.31remiterawdraH
.7noitcetedytilamronbaegatlovdaeH

■ INTERFACE, COMMAND, OPTIONS

Please refer to the FTP-624DCL/DSL DATA SHEET.

Japan

Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku

Fujitsu Components
International
Headquarter
Offices

Tokyo 141, Japan
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.fcl.fujitsu.com

North and South America

Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.fcai.fujitsu.com

© 2002 Fujitsu Components America, Inc. All company and product names are trademarks or registered
trademarks of their respective owners. Rev. 06/2002

Europe

Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.fceu.fujitsu.com

Asia Pacific

Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: [phone]
Fax: [phone]
Email: [e-mail]
www.fcal.fujitsu.com

7