Fujitsu FTP-632MCL302, FTP-632MCL301 User Manual

24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER
3” MECHANISM, WITH CUTTER

FTP-632MCL301/302

■ OVERVIEW

FTP-632MCL/FTP-622DCL/DSL Series is an ultra high speed
line thermal printer driven by 24 VDC, printing on 3-inch wide
paper (80 mm/85 mm).

This printer is compact and light weight, and the design allows
easy head maintenance, head cleaning and head replacement.

This printer is suitable for a variety of applications, such as POS
terminals, ticket machines, coupon machines, label printers,
medical instruments, etc. A printer with a specially designed
cutter is also available.

■ HIGHLIGHTS

• Ultra high speed printing

It can print at 80 mm/s (640 dotlines/s) maximum by using
Fujitsu Components' unique head drive control.

• Compact and lightweight

This printer has a low profile of only 20 mm, and a light
weight of approximately 94 g.

• Low power consumption

The peak current for head driving is approximately 2.9 A (at
80 mm/s printing speed, 50% printing ratio).

• Easy head access

It is designed for easy head cleaning and head replacement.

• Paper auto loading function

Thermal paper can be loaded without head-up lever
operation.

• ESC/POS

The commands conform to ESC/POSTM.

• Auto Cutter

Printer with auto cutter (full cut/partial cut) is also available.

• UL Recognized

File No.E171434

NOT FOR NEW

DESIGN

TM*1

Commands

FTP-632MCL301

FTP-622CU101

*1 ESC/POSTM is a registered trademark of SEIKO EPSON Corp.

FTP-622DCL011

■ DESIGNATION

FTP-632MCL301/302

Item

Printer mechanism

Interface board

LSI(MCU)

*1: Constructed with mechanism+cutter+attachment. 301 is for front paper insertion (curl path) and 302 is for rear

paper insertion (straight path).
*2: 011 supports ANK and 101 supports ANK + Kanji.
*3: 012 supports ANK and 111 supports ANK + Kanji, + FLASH memory.
*4: CU101 supports Kanji and cutter control.

With Auto cutter
Centronics Standard with Auto cutter
Serial (RS-232C)

FTP-632MCL301/302
FTP-622DCL011/111
FTP-622DSL011/012
FTP-622CU101

Part number

*1

*2

*3

*4

■ GENERAL SPECIFICATIONS

NOT FOR NEW

Part number FTP-632MCL301/302
Printing method Thermal-sensitive line dot method

SpecificationsItem

Dot structure 576 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 72 mm

DESIGN

MCL301 80 mm

Paper width

Paper thickness 60~100 µm*
Cutting type full or partial
Number of columns 48 columns/line (24×12 dot font)
Maximum printing speed 640 dotlines/s (80 mm/s)

Character types

Character composition, dimensions (H×W),
Number of characters

MCL302 85 mm

1

Alphanumeric KANA: 159 International characters: 195
JIS KANJI (FTP-622DCL101/111): approximately 6800

24 × 12 dots, (3.0 × 1.5 mm), 48 columns
24 × 24 dots, (3.0 × 3.0 mm), 24 columns
16 × 8 dots, (2.0 × 1.0 mm), 72 columns
16 × 16 dots, (2.0 × 2.0 mm), 36 columns

(Continued)

2