FUJITSU FTP-629MCL054 User Manual

FTP-629MCL054/353/354-R

24V DRIVE, FTP-609 SERIES
ULTRA HIGH SPEED (200

mm/s)

2” TYPE MECHANISM (Cutter option)

FTP-629MCL054/353/354-R

n OVERVIEW

The FTP-609MCL Series thermal printer (driven by 24VDC)
provides ultra-high speed printing (200mm/s) for 2-inch and 3­inch wide paper.

This series is suitable for a variety of applications, such as POS/
ECR, kiosk terminals, ticket machines, label printers, banking
machines, measuring devices, medical equipment, etc.

n HIGHLIGHTS

• Ultra high speed printing

It can print at 200 mm/s (1600 dotlines/s) maximum by using

Fujitsu Components' unique head drive control.

FTP-6x9MCL054R with

FTP-629DSL034R

• Rear paper insertion mechanism with lock type

Fujitsu Components' unique platen release mechanism allows

straight paper path and easy head maintenance.

• Auto Cutter

Printer with auto cutter (full cut/ partial cut) is available. It can

be mounted on top of the mechanism.

• Multi-featuring diecast frame

By application of multi-featuring diecast frame, continous print

by function of heat-sink, high ESD with stand by function of
earth frame and shock/vibration resistance by function of solid
frame are valid.

• Compact size

Depth: 40.5mm, width: 82.2mm, height: 20.5mm for the 2-

inch model. The 3-inch model has a width of 104.2mm

• High resolution

8 dots/mm head provides clear print out.

• RoHS compliant

1

FTP-629MCL054/353/354-R

n PART NUMBERS

Name Part Number

Printer mechanism Bottom insertion FTP-629MCL054R FTP-629MCL074R FTP-629MCL054R

Mechanism with cutter Front insertion FTP-629MCL353R TBA FTP-629MCL353R

Bottom insertion FTP-629MCL354R FTP-629MCL374R FTP-629MCL354R

LSI FTP-629CU101R FTP-629SR201 FTP-629CU301R

Interface board Parallel FTP-629DCL014R FTP-629DSL181R*

Serial (RS232C) FTP-629DSL034R FTP-629DSL181R* FTP-629DSL301R

USB --- FTP-629DSL112R FTP-629DSL301R

Thermal head cable extension --- FTP-629Y001 ---

Interface cable Parallel FTP-628Y202 ---

Serial FTP-628Y302 FTP-629Y302

USB --- FTP-629Y301

Power supply cable Logic FTP-629Y401 ---

Head, motor FTP-629Y601 FTP-629Y602

*: Interface is selectable by DIP switch

n GENERAL SPECIFICATIONS

Item Specications

Part number FTP-629MCL054/074-R FTP-629MCL354/374-R

Printing method Thermal sensitive line dot method

Dot structure 432 dots/line

Dot pitch (horizontal) 0.125mm (8dots/mm) - Dot density

Dot ptich (vertical) 0.125mm (8dots/mm) - Line feed pitch

Effective printing area 54 mm

Number of columns ANK 36 columns/line (12 x 24 dot font), OCR 18 columns (24x40)

Paper width 60 mm +0/-1

Paper thickness 60 to 150µm (there may be exceptions) 60 to 100µm

Cutting type --- full or partial

Printing speed FTP-629DCL/DSL series FTP-629DSL100 series/

FTP-629DSL300 series

80mm/sec. (640 dot lines/sec.)
line mode
200mm/sec. (1600 dot lines/sec.)
image mode

Interface types FTP-629DCL/DSL series

Character
types

Character, dimensions (WxH), number of
columns

Interface standard Centronics, RS-232C, USB Serial /USB

Alphanumeric, Kana:
International and special
OCRI
OCRIII
OCRIV
Extended numeric
JIS Kanji level 1, level 2, non-Kanji

FTP-629DCL/DSL100 series

159 types
195 types

about 6,800 types

(8x16 dots), 54 columns: ANK
(12x24 dots), 36 columns: ANK
(16x16 dots), 27 columns: ANK
(24x24 dots), 18 columns: ANK

125mm/sec. (1000 dot lines/sec.) line
mode
200mm/sec. (1600 dot lines/sec.)
page mode

FTP-629DSL300 series

159 types
195 types
103 types
23 types
103 types
11 types
about 6,800 types

(24 x 40 dots), 18 columns, OCRI
(24 x 48 dots), 18 columns, OCRII
(36 x 60 dots), 12 columns, OCRIV
(24 x 48 dots) 18 columns, extended
numeric

2

FTP-629MCL054/353/354-R

SpecicationsItem

Part number FTP-629MCL054/074-R FTP-629MCL354/374-R

Interfaces Centronics / RS-232C standard / USB

For head

24 VDC ±5% 1.4A (3A)

(24V , 25% printing ratio)

For printer motor 24VDC ±5% 1A maximum

Power
For cutter motor --- 24VDC±5% 1.2 A maximum
supply

For logic 5VDC± 5% 0.2 A maximum

Printer Mechanism 82.3

× 40.5 × 20.5 mm --­Dimensions
Wx D x H Printer Mechanism

w/cutter --- 90.6 × 62.5 × 37.2mm

Interface board

(DCL/DSL) 70 × 60 × 21.6mm

Interface board

(DSL100) 95 x 73.5 x 11.6mm

Interface board (DSL300) 77 x 50x 215mm

Weight Printer mechanism Approximately 100/110g ---

Printer mechanism

w/cutter --- Approximately 270g

Interface board

(standard) Approximately 25g

Interface board

(med speed) Approximately 45g

Interface board

(hi speed) Approximately 20g

Life Head Pulse durability: 100 milion pulse/dot

Wear resistance: 100 km (at 12.5% print ratio)

(using Fujitsu Components' standard driving method)

Cutter --- 500,000 cuts min.

Operating temperature -10˚C to +60°C (Guarantee) 0˚C to +50°C (Guarantee)

Environmental
conditions Operating humidity 20 to 85% RH (no condensation)

Storage temperature –40°C to +75°C (excluding paper) –20°C to +60°C

Storage humidity 5 to 95% RH (no condensation)

Head temperature By thermistor

Detection Paper out/Mark detect By photointerrupter

Head release By slide switch

High sensitivity paper TF50KS-E4 (Nippon paper)

Standard paper TF60KS-E (Nippon paper), FTP-020P0104 (58mm),
PD150R (Oji paper), FTP-020P020P0701 (58mm)

Medium term paper TP60KS-F1 (Nippon paper),FTP-020P0102(58mm),

Recommended

PD170R (Oji paper)

thermal sensitive

P220VBB-1 (Mitsubishi paper)

paper

PD160R-N (Oji paper)

Long term paper AFP-235 (Mitsubishi paper)
TP50KJ-R (Nippon paper)
HA220AA (Nippon paper)

3

FTP-629MCL054/353/354-R

Platen open lever

center of platen

(paper end sensor)

n FUNCTION

ITEM ITEM

1. Test printing 8. Cutter trouble detection

2. Paper-out detection 9. Motor power save

3. Paper near end detection 10. Mark detection

4. Head-up detection 11. MCU trouble detection

5. Abnormal temp. of thermal head detection 12. Power on/off sequence protection

6. Blown fuse detection 13. Motor protection

7. Abnormal voltage detection of head 14. Hardware timer

n DIMENSIONS

1. Printer mechanism

FTP-629MCL054R

Unit: mm

4

2. Printer mechanism with cutter

29.9

(57.5)

28.525.5

center
of platen

S

S

3.015.5

34.0

3.5

10.0

68.0

27.534.0

(75.1)

37.2

center
of paper

40.6

58.0

+0

-1

90.6

310

±15

A

platen
release lever

Notes:

1.The dimensions tolerance is ±0.5mm
unless specified.

2.Dimensions in parenthesis are
referene dimensions.

3.s shows the standard center line.

23.0

FTP-629MCL054/353/354-R

FTP-629MCL353/354-R

Unit: mm

5

FTP-629MCL054/353/354-R

oN langiS O/I stnetnoC oN langiS O/I stnetnoC

1 WS O hctiwsneponetalP 2 WS - hctiwsneponetalP

3 HV - daehlamrehtrofrewoP 4 HV - daehlamrehtrofrewoP

5 HV - daehlamrehtrofrewoP 6 HV - daehlamrehtrofrewoP

7 ID I niataD 8 2BTS I 2elbanetnirP

9 3BTS I 3elbanetnirP 01 DDV - cigolrofrewoP

11 MT - rotsimrehT 21 DNG - DNGdaeH

31 DNG - DNGdaeH 41 DNG - DNGdaeH

51 DNG - DNGdaeH 61 DNG - DNGdaeH

71 DNG - DNGdaeH 81 DNG - DNGdaeH

91 DNG - DNGdaeH 02 DNG - DNGdaeH

12 HT O rotsimrehT 22 1BTS I 1elbanetnirP

32 CN I detcennoctoN 42 TAL I hctalatadtnirP

52 KLC I kcolC 62 OD O tuptuoataD

72 HV - daehlamrehtrofrewoP 82 HV - daehlamrehtrofrewoP

92 HV - daehlamrehtrofrewoP 03 HV - daehlamrehtrofrewoP

C 4 IM

.oN langiS O/I stnetnoC .oN langiS O/I stnetnoC

1 1WS - hctiwsnoitisopemohrettuC 2 2WS O hctiwsnoitisopemohrettuC

3 +M O veirdrotomrettu - veirdrotomrettuC

M O

M O

.oN langiS O/I stnetnoC .oN langiS O/I stnetnoC

1 CN - detcennoctoN 2 MT O rosneserutarepmetrotoM

3 MT - rosneserutarepmetrotoM 4 AT /I AnoitaticxeliocrotoM

5 ATM O/I AnoitaticxeliocrotoM 6 BT /I BnoitaticxeliocrotoM

7 BTM O/I BnoitaticxeliocrotoM 8 KHP - edohtacrosnestuorepaP

9 NESV - rosnesrepaprofrewoP 01 EHP O rottimerosnestuorepaP

n CONNECTOR PIN ASSIGNMENT OF PRINTER MECHANISM (FPC)

1. Thermal head control circuit side

Part number : 52610-3071 (Molex) or equivalent

2. Motor, Sensor

Connector on circuit side : 52610-1071 (Molex) or equivalent

3. Cutter

Connector type: B4B-PH-SM4-TB (J.S.T.) or equivalent

n INTERFACE, COMMAND, OPTIONS

Please refer to the FTP-629DCL/DSL or FTP-629DCL/DSL100/300 series datasheet.

6

FTP-629MCL054/353/354-R

Fujitsu Components International Headquarter Ofces

Japan

Fujitsu Component Limited

Gotanda-Chuo Building

3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141 8630, Japan
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.fcl.fujitsu.com

North and South America

Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web: http://us.fujitsu.com/components/

Europe

Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web: emea.fujitsu.com/components/

Asia Pacic

Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web: http://www.fujitsu.com/sg/services/micro/components/

©2009 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.

Fujitsu Components America or its afliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or its afliates reserve the right to change specications/datasheets without prior notice.

Rev. February 27, 2009.

7