baTTery driveN, FTP-608 series
2” high sPeed TherMaL PriNTer
FTP-628MCL401/451
n Overview
The FTP-628 MCL Series are battery driven high-speed
printers with a 2-inch paper width equivalent.
The FTP-628 MCL Series can be used for a variety of
applications, such as portable terminals, POS, banking
terminals, and measurement and medical equipment.
n highLighTs
• Ultralowprole
Height 21.8 mm, width 81.2 mm, depth 42.2 mm
• Highspeedprinting
It can print at 60 mm/s (480 dotlines/s) maximum by using
Fujitsu's unique head drive control.
• AutoCutter
Full cut type and partial cut type printers are available by
user selection.
• Easypapersetting
Our unique platen release mechanism allows a
wide paper route even if the printer is ultra-compact, so
paper can be easily inserted. Conventional auto loading is
also available.
• Multifunctionaldie-castform
Wide operating temperature range, long continuous
printing, high ESD absorbtion and discharge of static
electricity vibration and shock resistant.
• RoHScompliant
FTP-628MCL401
FTP-628DSL491R
1
FTP-628MCL401/451
n ParT NuMbers
Name Part Number
Printer mechanism with cutter FTP-628MCL401 (Easy Load Model)
Printer mechanism without cutter FTP-628MCL451 (Easy Load Model with platen bracket + lock
lever)
LSI for driving FTP-629CU451R
Interface board for
Mechanism/Cutter
Interface cable Parallel (Centronics) FTP-628Y202
Power cables Head, motor, logic FTP-628Y402
nsPeCiFiCaTiONs
Cutter supported FTP-628DSL491R Parallel (Centronics) / Serial (RS-232C)
Serial (RS-232C) FTP-628Y302
Specications Item
Part number FTP-628MCL401
Printing method Thermal-line dot method
Dot structure 384 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 48 mm
Number of columns ANK 32 columns/line (maximum 12 x 24 dot font)
Paper width 58 mm
Paper thickness 60 to 100 µ m (some paper in this range may not be used because
of paper characteristics)
Printing Speed Maximum 60mm/sec. (480 dot line/sec.) at 8.5V
Character types
Alphanumeric, kana: 159 types
International characters: 195 types
JIS Kanji (Kanji CG loaded board): about 6800 types
Character, dimensions (W×H), number
12 × 24 dots, (1.5 × 3.0 mm), 32 columns: ANK
24 × 24 dots, (3.0 × 3.0 mm), 16 columns: ANK
of columns
8 × 16 dots, (1.0 × 2.0 mm), 48 columns: ANK
16 × 16 dots, (2.0 × 2.0 mm), 24 columns: ANK
2
nsPeCiFiCaTiONs
m etI n oita cifice p S
e cafretnI scin ortn e C / C 2 3 2 S R ot s m rofn o C
re w o P
ylp p us
d a e h tnirp ro F
V 2.7 ta A)4.2( 8.1 ,tn erru c e g arev a C D V 5.8 - 2.4
).ce s/ m m 0 6 :d e e ps tnirp , % 5.2 1 :oitartnirp(
roto m ro F m u m ixa m A 1 ,C D V 5.8 - 2.4
roto m rettuc ro F m u m ixa m A 1 ,C D V 5.8 - 5 7.4
cig olro F m u m ixa m A 1.0 , % 5 ± C D V 5
s n ois n e miD
rettuc htiw m sin a h ce M ) H x D x W ( m m 8.1 2 x 2.2 4 x 2.1 8
dra o b ec afretnI m m 2 1x 0 6 x 0 7
th gie W
rettuc htiw m sin a h ce M g 7 9 yleta mix orp p A
dra o b ec afretnI g 5 2 yleta mix orp p A
efiL
d a e H
dra d n ats ru o re d n u(to d/s eslu p n oilli m 0 0 1 :ec n atsiser eslu P
m k0 5 ec n atsid g nile vartre p a p :ec n atsis er n oisarb A ;)sn oitid n o c
)ss elro % 5.2 1 :oitartnirp(
rettu C stuc 0 0 0,0 0 5
g nitare p O
tn e m n orivn e
*erutare p m et g nitare p O C ˚0 5 ot C ˚
0
ytidim u h g nitare p O )n oitas n e d n oc o n( H R % 5 8 ot 0 2
erutare p m et e g arotS )d e d ulc nito n re p a p( C ˚0 6 + ot C ˚0 2-
ytidim u h e g arotS )n oitas n e d n oc o n( H R % 5 9 ot 5
n oitc ete D
n oitc n uf
erutare p m et d a e H
n oitc ete d
rotsi m re hty b d etc ete D
n oitc ete d kra m /tu o re p a P retp urretni-oto h p yb d etc ete D
e sa eler n etalP h ctiw s g nidils yb d etc ete D
e d alb elb av o M retp urretni-oto h p yb d etc ete D
re p a p e vitis n esla m re ht d e d n e m m oc e R
re p a P e vitisn e S h giH )re p a P n o p piN( 4 E-S K 0 5 F T
:re p a p dra d n atS -P T F ,)re p a P n o p piN(E -S K 0 6 F T
,)re p a P ijO ( R 5 0 1 D P ,) m m 8 5( 1 0 0 U P 0 2 0
) m m 8 5( 1 0 7 0 P 0 2 0-P T F
re p a P efiL m uid e M ,) m m 8 5( 2 0 1 0 P 0 2 0-P T F ,1 F-S K 0 6 F T
1-B B V 0 2 2 P ,)re p a P ijO ( R 0 71 D P
)re p a P ih sib ustiM
re p a P efiL g n o L 5 3 2-P F A ,)re p a P ijO ( N- R 0 6 1 D P
n o p piN( R -J K 0 5 P T ,)re p a P ih sib ustiM (
)re p a P n o p piN( A A 0 2 2 A H ,)re p a P
Platen 5,000 times (open/close)
FTP-628MCL401/451
*+5˚C to +40˚C printing density assurance rance (-25 to 70˚C capability)
3
FTP-628MCL401/451
11
7.5
(54)
13.9
13.1
42.2
21.8
10.7
5.4
81.2
platen center
printer position standard
platen unit
paper exhaust position
lever
platen unit
paper
printer
cutting position
n FuNCTiON OF iNTerFaCe bOard
Item Item
1.
Test print function 8. Cutter trouble detect
2. Paper out detection 9. Motor power saving function
3. Paper near end detection 10. Mark detection function
4. Platen open detection 11. MCU operation abnormality detection
5. Thermal head temperature abnormality detection 12. Power ON/OFF sequence protection
6. Blow-out fuse detection 13. Motor over-current protection
7. Head voltage abnormality detection 14. Hardware timer
n diMeNsiONs
1.Printermechanism
FTP-628MCL401
Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specied).
2. Platen unit (lever, platen, etc) moves by approximately 0.7mm toward paper insertion direction when platen is
open.
Unit: mm
4
1.Printermechanism
FTP-628MCL451
FTP-628MCL401/451
5
2.Interfaceboard
17.5
49.5
63.5
(70.0)
3.25
53.5
3.25
(60.0)
50.5
42.0
3.25
FGØ3.2
3-Ø3.2
CN7
CN2
CN1
CN8
CN3
1
1
6
8
1
2
29
30
1
2
CN4
1
8
25.5
13.5
3.25
3.25
1.25
1.0
1.2
7
3
1.6
30
1
45.5
Note:
1. The size with parentheses is a reference value.
2. Part mounting height is maximum.
Unit:mm
Mounting height
Mounting height
1.45
FTP-628MCL401/451
6
FTP-628MCL401mechanism/cutterFPCPINAssignment
o N la n giS stn etn o C
1 K H P rotp urretnioto h p rof e d o hta C
2 N E S V re w o p ros n e s re p a p
3 E H P rotp urretnioto h p rofrottim E
4 H V
re w o p e vird d a e H
5 H V
6 ID ni ata D
7 K L C k c olC
8 D N G
d n u org d a e H
9 D N G
0 1 6 B T S 6 e b ortS
1 1 5 B T S 5 e b ortS
2 1 4 B T S 4 e b ortS
3 1 d d V re w o p cig o L
4 1 M T
rotsi m re h T
5 1 M T
6 1 3 B T S 3 e b ortS
7 1 2 B T S 2 e b ortS
8 1 1 B T S 1 e b ortS
9 1 D N G
d n u org d a e H
0 2 D N G
1 2 T A L h ctal ata D
2 2 O D tu o ata D
3 2 H V
re w o p e vird d a e H
4 2 H V
5 2 W S
h ctiw s es a eler n etalP
6 3 W S
7 2 A/T M A la n gis n oitaticx E
8 2 A /T M A la n gis n oitaticx E
9 2 B /T M B la n gis n oitaticx E
0 3 B/T M B la n gis n oitaticx E
(1) For thermal head, motor and sensor
Connector on control circuit: 52610-3090 (Molex or equivalent)
FTP-628MCL401/451
7
FTP-628MCL451mechanism/platenbracketFPCPINAssignment
o N la n giS stn etn o C
1 K H P rotp urretnioto h p rof e d o hta C
2 N E S V re w o p ros n e s re p a p
3 E H P rotp urretnioto h p rofrottim E
4 H V
re w o p e vird d a e H
5 H V
6 ID ni ata D
7 K L C k c olC
8 D N G
d n u org d a e H
9 D N G
0 1 6 B T S 6 e b ortS
1 1 5 B T S 5 e b ortS
2 1 4 B T S 4 e b ortS
3 1 d d V re w o p cig o L
4 1 M T
rotsi m re h T
5 1 M T
6 1 3 B T S 3 e b ortS
7 1 2 B T S 2 e b ortS
8 1 1 B T S 1 e b ortS
9 1 D N G
d n u org d a e H
0 2 D N G
1 2 T A L h ctal ata D
2 2 O D tu o ata D
3 2 H V
re w o p e vird d a e H
4 2 H V
5 2 W S
h ctiw s es a eler n etalP
6 3 W S
7 2 A/T M A la n gis n oitaticx E
8 2 A /T M A la n gis n oitaticx E
9 2 B /T M B la n gis n oitaticx E
0 3 B/T M B la n gis n oitaticx E
(1) For thermal head, motor and sensor
Connector on control circuit: 52610-3090 (Molex or equivalent)
FTP-628MCL401/451
8
(2) For cutter
o N la n giS stn etn o C
1 N E S V re w o p ros n es n oitiso p e m o H
2 E H P rotp urretnioto h p rofrottim E
3 K H P rotp urretnioto h p rof e d o hta C
4 A/T M A la n gis n oitaticx E
5 A/T M A la n gis n oitaticx E
6 B/T M B la n gis n oitaticx E
7 B/T M B la n gis n oitaticx E
8 C N d etc e n n oc to N
Connector on control circuit: 52610-0890 (Molex or equivalent)
Sensor (Photointerruptor)
Platen unit
FTP-628MCL401/451
FujitsuComponentsInternationalHeadquarterOfces
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Web: www.fcl.fujitsu.com
NorthandSouthAmerica
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: components@us.fujitsu.com
Web: http://us.fujitsu.com/components/
Motor
Connector No
(FPC pin
Thermal head
FPC
Connect terminal:
surface side
30,29,
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp, The Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Web: emea.fujitsu.com/components/
AsiaPacic
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: fcal@fcal.fujitsu.com
Web: http://www.fujitsu.com/sg/services/micro/components/
©2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners.
Fujitsu Components America or its afliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its
afliates reserve the right to change specications/datasheets without prior notice.
Rev. August 17, 2007
9