Fujitsu FI 4220C - Document Scanner Quick Installation Manual

Download

Page 1

Quick Installation Guide

fi-XXX

X X

Connect the USB interface cable, SCSI interface cable and the AC cable

Refer to the "fi-4220C Image Scanner Operator's Guide" when you would like to know more about the scanner.

Refer to the "Scanner Utility for Microsoft

WindowsR User's Guide" on the Scanner driver CD-ROM when you would like to know more detailed information about the FUJITSU TWAIN32 Scanner driver installation.

Check the scanner and accessories

Confirm that all of the following items are included.

Scanner

Carefully read the "fi-4220C Image Scanner Operator's Guide" before using this product. Particularly read and understand the "Safety Precautions" before using this product.

fi-4220C Image Scanner Operator's Guide

ADF paper chuteUSB interface cable

Caution

Confirm that the power of PC and the image scanner device is turned off.

1. Connect either the USB interface cable or the SCSI interface cable.

When using Windows

Connecting the USB interface cable

Connect the PC end of the USB interface cable to the PC.

1 2

Connect the scanner end of the USB interface cable to the scanner.

Connecting the SCSI interface cable

Connect the PC end of the SCSI

1 2

Connect the scanner end of the SCSI

3 Check the SCSI ID switch. The SCSI ID switch is set to No. 5. If another device has the same ID then change the SCSI

ID. Refer to the "fi-4220C Image Scanner Operator's Guide" for information about the

procedure to change the SCSI ID.

• It is necessary to separately purchase a SCSI interface cable and a

Caution

•

Connect the AC adapter with the AC Cable, and then connect it to the DC inlet on the Scanner.

95, Windows NTR 4.0,connect the SCSI interface cable.

interface

SCSI card which are available commercially. See "fi-4220C Image Scanner Operator's Guide" for details. Connect the scanner so that it is the terminator SCSI device.

cable to the PC.

interface

cable to the scanner.

3. Insert the AC cable into the power outlet.

Next, install the FUJITSU TWAIN32 Scanner driver.

SCSI interface connector

*1) Connect to your PC. *2) Connect to the power outlet.

• When using Windows

or Windows complete installation.

• When using Windows

procedure in to complete the installation.

USB interface connector

SCSI interface cable(*1)

XP, perform the procedure in step to

98, WindowsR Me, WindowsR 2000

95 or Windows NTR4.0, perform the

DC inlet

AC cable(*2)

USB interface cable(*1)

Adobe CD-ROM

AcrobatR 5.0

Release

Manual CD-ROM

FUJITSU TWAIN32

Scanner Driver

CD-ROM

FUJITSU ISIS

Scanner Driver

CD-ROM

Release the Shipping Lock

Lock

Attach the ADF paper chute

1. Holding the ADF paper chute, insert it so that the two tabs on the chute

slot into the holes on the rear of the scanner. Attach the ADF paper chute so that the side with the side guides is face up.

fi-4220C Quick Installation Guide

AC adapterAC cable

Make sure to slide the shipping lock in place (located on the bottom of the scanner) to secure the internal carrier unit during transportation. After transporting and placing the scanner, tilt the scanner (approx. 30 degrees) and release the shipping lock. See the "fi-4220C Image Scanner Operator's Guide" for further details.

ADF paper chute

FUJITSU ISIS Scanner Driver Quick Installation Guide

tab

5-a

Install FUJITSU TWAIN32 Scanner driver

WindowsR 98,WindowsR Me,WindowsR 2000,WindowsRXP

Install the mini-driver first, and then the TWAIN data source.

Caution

The Windows and operations will differ slightly depending on the OS that is being used.

Preparation

Confirm that the Scanner is connected to your personal computer with the USB interface cable or SCSI interface cable.

Installing the mini-driver

1. Turn on the power by pushing the power switch on the scanner's control

panel. The green LED on the control panel lights. The Function No. display shows to the order "8","P","0","1". When Function No. display reaches "1" the scanner is ready.

2. Turn on your personal computer and log on to Windows

When using Windows administrator . The "Found New Hardware Wizard" dialog box is displayed.

Check "Install from a list or specific location (Advanced)", then click [Next].

If the old version of FUJITSU TWAIN32 Scanner driver has been installed on your personal computer, refer to the

"Scanner Utility for Microsoft

XP screen samples are shown below. The screen

Windows R User's Guide" on the Scanner driver CD-ROM, and update the mini-driver.

4. Insert the Scanner driver CD-ROM

5. Select "Search for the best

driver in these locations".

Check "Include this location in

the search:" then specify D:\Driver2 (When your CDROM is the D drive). After that click [Next].

2000 or WindowsR XP log on as an

For Windows D:\Driver2 (When your CD-ROM is the D drive). After that click [Next]. For Windows device." Check "Specify a location" then specify D:\Driver2 (When your CD-ROM is the D drive). After that click [Next].

For Windows next screen specify "Copy manufacturer's files from:" then specify

D:\Driver2 (When your CD-ROM is the D drive), then click [OK].

98, just check "Specify a location:" then specify

Me, select "Search for the best driver for your

2000, just check "Specify a location" and then in the

For WindowsR Me, check "Specify the location of the driver

(Advance)", then click [Next].

For Windows

search method screen is displayed.

Side guide

• For Windows devise. (Recommended)" then click [Next].

• For Windows device (Recommended)" then click [Next].

2000 and WindowsR 98, clicking on [Next] the select

98, select "Search for the best driver for your

2000, select "Search for a suitable driver for my

Continued on next page

P3PC-E057-03EN

Page 2

Continued from previous page

6. For Windows

screen is displayed, click [Continue Anyway] and complete the installation.

For Windows displayed, click [Yes]. For other operating systems click [Next].

Caution

7. Click [Finish] .

XP, the next

2000, the "Digital Signature Not Found" dialog is

For WindowsR 98 there is a request to insert a disc. When this happens, insert the WindowsR 98 CD-ROM.

Installing TWAIN data source

When using WindowsR 2000 or WindowsR XP log on as an administrator.

1. Insert the Scanner Driver CD-ROM, then use the explorer to double

click on D:\Driver2\Setup\install.exe (when your CD-ROM is the D drive).

Hint

When automatic start has been set, the setup disk start screen is displayed.Installation can be started from this screen also.

2. Follow the instruction on the screen to complete the installation. Make

the best selection that suits your needs.

• Select the language you will use during installation.

• Check the installation directory. If you need to change the installation destination, click the [Browse...] button then specify the destination.

• Check the names of components that need to be installed in [Select Components]. Explanation of the component is displayed underneath it.

3. When installation is finished, confirm that the following folder has been

created. The icons displayed differ depending on the setting in [Select Component] during installation.

Install Image Capturing Software Utilities "ScandAll 21" for MicrosoftR Windows

When using Windows NTR4.0, WindowsR 2000 or WindowsR XP, log on as an administrator .

1. Insert the Scanner driver CD-ROM, then use explorer to double click

on ScandAll 21.exe in the ScandAll folder in the CD-ROM drive.

2. Select the language you use

during installation in [Choose Setup Language] then click [OK]. This screen might not be displayed.

3. Click [Next] in the welcome screen.

4. Carefully read the License

Agreement then click [Yes], if you agree.

5. Confirm the name of the

destination folder then click [Next].

6. Click [Finish].

5-b

8. Restart the system.

After restarting the system install the TWAIN data source.

Continue by installing Image Capturing Software Utilities "ScandAll 21" for Microsoft

WindowsR.

Install FUJITSU TWAIN32 Scanner driver

WindowsR 95,Windows NTR4.0

Refer to the "Scanner Utility for MicrosoftR WindowsR User's Guide" on the Scanner driver CD-ROM when you would like to know more detailed information about the FUJITSU TWAIN32 Scanner driver installation.

Preparation

1. Confirm that the SCSI adapter is attached to your personal computer.

2. Confirm that SCSI driver and ASPI manager are correctly integrated and operating.

Caution

3. If an older version is installed, uninstall it before doing the installation.

Installation

1. Turn on the power by pushing the power switch on the scanner's control panel.

2. Turn on your personal computer and log on Windows

3. Insert the Scanner driver CD-ROM, then use explorer to double click on D:\Driver1\ASPI\install.exe (when your CD-ROM is the D drive).

ASPI manager Version 4.01 or newer is required. Check the WNASPI32.DLL file version with explorer. Please refer to "Scanner Utility for Microsoft

The green LED on the control panel lights. The Function No. displayl shows to the order "8","P","0","1". When Function No. display reaches "1" the scanner is ready.

When using Windows NT

4.0, log on as an administrator.

WindowsR User's Guide" for details.

Scanning documents

Confirm whether the scanner works normally, as follows.

1. Place a document on the ADF paper chute.

For details on how to load documents, see " 3 BASIC SCANNER OPERATIONS" in the "fi-4220C Image Scanner Operator's Guide"

Caution

In case of WindowsR 98, WindowsR Me, Windows and Windows an application may start automatically or the window for selecting application may be displayed. If you want to change these setting, refer to "6.3 Event tab" of " Microsoft

XP, when documents are set on the scanner,

WindowsR User's Guide

2. Start ScandAll 21.

In the start menu select [Program] then [Scanner Utility for Microsoft Windows] then [ScandAll 21] in that order.

3. Specify the scanner

you are using.

Select [Select Source] from the [Scan] menu in ScandAll 21.

The following dialog is displayed.

- In case of Windows

Select "FUJITSU fi-4220Cdj".

- In case of and Windows NT

Select "FUJITSU TWAIN32".

And then Click [Select].

WindowsR 98, WindowsR Me,

2000, and WindowsR XP,

WindowsR 95,

4.0,

Scanner Utility for

2000,

5. In [TWAIN Driver] (Scan

conditions setting screen) set the scan resolution, paper size and other scanning conditions,

and click the [Scan] button. For details on settings in the [TWAIN Driver] dialog box, refer to the "Scanner Utility for Microsoft Guide" on the Scanner driver CD-ROM.

The document is scanned and

the image is displayed on the

ScandAll 21 screen.

If the document can be scanned then setup has been successfully finished. For various scanning operations not mentioned here, see " 4 SCANNING VARIOUS TYPES OF DOCUMENTS" in the "fi-4220C Image Scanner Operator's Guide". See "ScandAll 21 Help" for information about ScandAll 21 functions and operations.

WindowsR User's

Hint

When automatic start has been set, the setup disk start screen is displayed. Installation can be started from this screen also.

4. Follow the instruction on the screen.

5. When installation is finished, confirm that the following group ("Scanner Utility for Microsoft Windows" group) has been created.

Continue by installing Image Capturing Software Utilities "ScandAll 21" for Microsoft

WindowsR.

4. Click [Scan To View] in the toolbar.

Installation end

The screen images may be changed due to improvements without notice.

If the displayed screen images are slightly different from the screen images in "fi-4220C Quick Installation Guide" follow the actual screen display for installation. Please also refer to the software operation

manual and do the installation according to the actual screens.