Fujitsu fi-4010CU User Manual

Quick Installation Guide

fi-X

X XXX

X X

XXX

Connect the USB cable, ADF cable, and power cable

Refer to the "fi-4010CU Image Scanner Operator's Guide" when you would like to know more about the scanner.

Refer to the "Scanner Utility for Microsoft

WindowsR User's Guide" on the Scanner driver CD-ROM when you would like to know more detailed information about the FUJITSU TWAIN32 Scanner driver installation.

Check the scanner and accessories

Confirm that all of the following items are included.

ADF paper chute A

Scanner

USB cable

Carefully read the "fi-4010CU Image Scanner Operator's Guide" before using this product. Particularly read and understand the "Safety Precautions" before using this product.

Document stopper

Pad ASY

ADF paper chute B

Caution

Before connecting the scanner, be sure to turn off the PC and the scanner.

1. Insert smaller connector of the USB cable(the one with a core) to the USB conector

on the back side of the scanner.

2. Connect the other end of the USB cable to the PC.

Connect the ADF cable to the ADF cable connector of the scanner, and fix the thumb screws of the ADF cable connector.

Connect the power cable to the AC adapter and connect the AC adapter to the AC adapter connector of the scanner.

Insert the power cable to the power outlet.

USB connector

USB cable

Connect to your PC.

ADF cable connector

ADF cable

AC adaptor connector

Power cable

Connect to the power outlet.

Manual CD-ROM

Scanner driver CD-ROM

Release the Shipping Lock

Slide the Shipping Lock to "Unlock" position.

AdobeR AcrobatR 5.0 CD-ROM

AC cable fi-4010CU Quick Installation Guide

Lock

Shipping Lock

AC adapter

1. Raise the scanner carefully upward so that bottom side of

the scanner faces towards you.

2. Slide the lock switch to "Unlock" position to release the

lock.

Unlock

fi-4010CU Image Scanner Operator's Guide

Install FUJITSU TWAIN32 Scanner driver

WindowsR 98, WindowsR Me, WindowsR 2000, WindowsRXP

Be sure to install the TWAIN data source after installing the mini-driver.

Caution

The Windows and operations will differ slightly depending on the OS that is being used.

Preparation

Confirm that the Scanner is connected to your personal computer with the USB cable.

Installing the mini-driver

1. Turn on the power by pushing the power switch in the back of the

scanner. The power lamp lights.

2. Turn on your personal computer and log on to Windows

When using Windows administrator . The "Found New Hardware Wizard" dialog box is displayed.

If the old version of FUJITSU TWAIN32 Scanner driver has been installed on your personal computer, refer to the "Scanner Utility for Microsoft

XP screen samples are shown below. The screen

Windows R User's Guide" on the Scanner driver CD-ROM, and update the mini-driver.

4. Insert the Scanner driver CD-ROM

When automatic start has been set, the "SETUP DISK

Caution

START UP SCREEN" is displayed. To close this screen, click the [Exit] button on this screen.

5. Select "Find the most suitable

driver in the next location". Check "Include the next location" then specify D:\Driver2 (When your CDROM is the D drive). After that

2000 or WindowsR XP log on as an

click [Next].

Check "Install from list or specified location", then click [Next].

Attach the ADF paper chute and Document stopper

ADF paper chute B

1. Attach the ADF paper chute A to the ADF unit so that the side guide of the

ADF paper chute faces up.

2.Attach the ADF paper chute B to the ADF paper chute A so that the flip out of

part of the ADF paper chute B faces up.

3.Insert the clows of the document stopper into the slots of the scanner. Slide the

document stopper in the direction of the arrow marked on it to fix the stopper.

Flip out part

Document stopper

ADF paper chute A

For WindowsR Me check "Specify the driver location", then click

[Next].

For Windows

search method screen is displayed.

• For Windows device being used" then click [Next].

• For Windows device" then click [Next].

2000 and WindowsR 98, clicking on [Next] the select

98 select "Find the most suitable driver for the

2000 select "Find the most suitable driver for the

For Windows D:\Driver2 (When your CD-ROM is the D drive). After that click [Next]. For Windows device being used" then click [Next]. Check "Specify search location" then specify D:\Driver2 (When your CD-ROM is the D drive). After that click [Next].

For Windows next screen specify "Copy source for origination file" then specify

D:\Driver2 (When your CD-ROM is the D drive), then click [OK].

98, just check "Specify search location" then specify

Me, select "Find the most suitable driver for the

2000, just check "Specify location" and then in the

Continued on next page

P3PC-E117-01EN

Continued from previous page

6. For Windows

screen is displayed, click [Continue] and complete the installation. For other operating systems click [Next].

Caution

7. Click [Finish] .

8. Restart the system.

After restarting the system install the TWAIN data source.

XP, the next

For WindowsR 98 there is a request to insert a disc. When this happens, insert the Windows

98 CD-ROM.

Installing TWAIN data source

When using WindowsR 2000 or WindowsR XP log on as an administrator.

1. Insert the Scanner Driver CD-ROM, then use the explorer to double

click on D:\Driver2\Setup\install.exe (when your CD-ROM is the D drive).

Hint

When automatic start has been set, the "SETUP DISK START UP SCREEN" is displayed.Installation can be started from this screen also.

2. Follow the instruction on the screen to complete the installation. Make

the best selection that suits your needs. Select the language you will use during installation. Check the names of components that need to be installed in [Select

Components]. Explanation of the component is displayed underneath

it. Check the installation directory. If you need to change the installation

destination, click the [Change Directory] button then specify the

destination Click the [Continue] button to start the installation.

3. When installation is finished,

confirm that the following folder has been created. The icons displayed differ depending on the setting in [Select Component] during

installation.

Continue by installing Image Capturing Software Utilities "ScandAll 21"

for Microsoft

WindowsR.

Scanning documents

Confirm that the scanner works correctly, as follows.

1. Place a document on the ADF paper chute.

For details on how to load documents, see " 3.2 Scanning document with ADF" in the "fi-4010CU Image Scanner Operator's Guide"

2. Start ScandAll 21.

In the start menu select [Program] then [Scanner Utility for Microsoft Windows] then [ScandAll 21] in that order.

3. Specify the scanner

you are using. Select [Select Source] from the [Scan] menu in ScandAll 21.

In the dialog box that is displayed, select "FUJITSU fi-4010CU" then click [Select].

4. Click [Scan preview screen] in the toolbar.

5. In [TWAIN Driver] (Scan

conditions setting screen) set the scan resolution, paper size and other scanning conditions,

and click the [Scan] button. For details on settings in the [TWAIN Driver] dialog box, refer to the "Scanner Utility for Microsoft Guide" on the Scanner driver CD-ROM.

The document is scanned and

the image is displayed on the

ScandAll 21 screen.

If the document can be scanned then setup has been successfully finished.

See "ScandAll 21 Help" for information about ScandAll 21 functions and operations

WindowsR User's

Install Image Capturing Software Utilities "ScandAll 21" for MicrosoftR Windows

When using WindowsR 2000 or WindowsR XP, log on as an administrator .

1. Insert the Scanner driver CD-ROM, then use explorer to double click

on ScandAll 21.exe in the ScandAll folder in the CD-ROM drive.

2. Select the language you use

during installation in [Chooze Setup Language] then click [OK]. This screen might not be displayed.

3. Click [Next] in the welcome screen.

4. Carefully read the License

Agreement then click [Yes], if you agree.

5. Confirm the name of the

destination folder then click [Next].

Installation end

The screen images may be changed due to improvements without notice.

If the displayed screen images are different from the screen images in this guide follow the actual screen display for installation. Please also refer to the software operation

manual and do the installation according to the actual screens.

6. Click [Finish].