DATASHEET IP Switch Brocade FCX648S
DATASHEET
IP Switch Brocade FCX648S
THE IDEAL IP SWITCH FOR THE PRIMERGY CX1000
The Brocade FCX648S is Brocade’s next
generation stackable data center class Ethernet
switch specifically designed to address the
unique requirements of the enterprise edge
market. The Brocade FCX648S switch delivers
high-performance, scalable and flexible
enterprise campus access solutions with o nly 1
rack unit (RU).
The single Brocade FCX648S offers 48 ports with
1GbE for connecting server and storage systems
together and two 10GbE uplinks to the data
center network. Up to eight Brocade FCX648S
switches can be stacked into a si ngle logical
switch with a single IP address to simplify
management.
Brocade FCX648S is targeted at enterprises of all
sizes. Large enterprise companies as well as
medium and small enterprises will use this s witch
to connect end users’ end devices in th e data
centers.
The typical usage environment for the switc h is
the data center where it can be used as a top of
the rack- or access-layer-switch. Another very
important usage scenario is the PRIMERGY
CX1000 solution. In this solution, in which 38
rack servers work together in one rack, the
Brocade FCX648S offers high performance
server connectivity and network redundancy .
Page 1 of 6 http://ts.fujitsu.com/storage
DATASHEET IP Switch Brocade FCX648S
FEATURES AND BENEFITS
MAIN FEATURES BENEFITS
Simplified, High-Performance Stacking
The Brocade FCX648S includes two dedicated 1 6 Gbps stacking
ports,
Up to eight Brocade FCX648S switches can be stac ked into a single
logical switch with a single IP address
Power
Power to campus devices is automatically nego tiated, providin g
exactly the amount of power that they ne ed.
PRIMERGY CX1000
The Brocade FCX648S is a part of the PRIMERGY CX1000 soluti on
The switch is pre-tested and certified with the PRI MERGY CX1000
Providing simple and robust expandabil ity for future growth at the
network edge
Simple management
Flexibility
Ideal for customers who Pay as you grow
Easy extensibility
Reduced power consumption
If devices go into sleep mode, they c an request less power fro m the
network, minimizing power usage in the campus environment
and therefore the preferred switch for this solution
Page 2 of 6 http://ts.fujitsu.com/storage
DATASHEET IP Switch Brocade FCX648S
TECHNICAL DETAILS
GENERAL SPECIFICATION Brocade FCX648S
Switching bandwidth (data rate, full duplex) 200 Gbps
Forwarding bandwidth (data rate, full duplex) 150 Mpps
Stacking bandwidth (data rate, full duplex) 64 Gbps
10/100/1000 Mbps RJ-45 ports 44
10/100/1000 Mbps combination ports 4
16 Gbps CX4 stacking ports 2
Power supplies 2 removable (second optional)
10 Gigabit Ethernet module FCX-2XG
Second power supply RPS13
Replacement fan unit FCX-S-FAN
10/100/1000 Mbps combination ports 4
System Architecture
Connector options 10/100/1000 ports: RJ-45 (fixed), 1 Gbps SFP combo ports: SX;
10 Gbps XFP ports: SR; Out-of-band Ethernet mgmt: RJ-45 (fixed);
Console management: DB9
Maximum MAC addresses
Maximum VLANs
Maximum STP (spanning trees)
Maximum routes (in hardware)
Trunking
Maximum Jumbo Frame size
IEEE standards compliance •
Layer 2 switching •
32,000
4096
255
16,000
Maximum ports per trunk: 8
Maximum trunk groups: 32
9000 bytes
802.1AB LLDP/LLDP-MED
• 802.1D-2004 MAC Bridging
• 802.1p Mapping to Priority Queue
• 802.1s Multiple Spanning Tree
• 802.1w Rapid Spanning Tree
• 802.1x Port-based Network Access Control
• 802.3 10 Base-T
• 802.3ab 1000 Base-T
• 802.3ad Link Aggregation (Dynamic and St atic)
• 802.3ae 10 Gigabit Ethernet
• 802.3af Power over Ethernet
• 802.3ak CX4
• 802.3u 100 Base-TX
• 802.3x Flow Control
• 802.3z 1000Base-SX/LX
• 802.3 MAU MIB (RFC 2239)
802.1s Multiple Spanning Tree
• 802.1x Authentication
• Auto MDI/MDIX
• BPDU Guard, Root Guard
• Dual-Mode VLANs
• Dynamic VLAN Assignment
• Dynamic Voice VLAN Assignment
• Fast Port Span
• Flexible Static Multicast MAC Address Configurati on
• GARP VLAN Registration Protocol
• IGMP Snooping (v1/v2/v3)
• Link Fault Signaling (LFS)
• MAC Address Locking
• MAC-Layer Filtering
• MAC Learning Disable; Port Security
• MLD Snooping (v1/v2)
• Multi-device Authentication
• Per VLAN Spanning Tree (PVST/PVST+/PVRST)
• PIM–SM Snooping
Page 3 of 6 http://ts.fujitsu.com/storage
DATASHEET IP Switch Brocade FCX648S
A
A
A
Layer 3 routing •
Metro features
Quality of service •
Traffic management
Management
Management and control •
•
• Port-based Access Control Lists
• Port-based, ACL-based, MAC Filter-based, and VLAN based Mirroring
• Port Loop Detection
• Port Speed Downshift and Selective Auto- negotiation
• Private VLAN
• Private VLANs and Uplink Switch
• Protected Link Groups
• Protocol VLAN (802.1v), Subnet VLAN
• Remote Fault Notification (RFN)
• Single-instance Spanning Tree
• Single-link LACP
• Trunk Groups
• Trunk Threshold
• Uni-Directional Link Detection (UDLD)
• Host routes
• IPv4 Static Routes
• L3/L4 ACLs RIP v1/v2 announce
• OSPF v2
• PIM-SM, PIM-SSM, PIM-DM
• RIP v1/v2
• Routed Interfaces
• Route-only Support
• Routing Between Directly Connected Subnets
• Virtual Interfaces
• Virtual Route Redundancy Protocol (VRRP)
•
• Virtual Switch Redundancy Protocol (VSRP)
• VLAN Stacking (Q-in-Q)
• VRRP
• Topology Groups
• ACL Mapping to Priority Queue
• ACL Mapping to ToS/DSCP
• Classifying and Limiting Flows Based on TCP Fl ags
• DHCP Relay
• DiffServ Support
• Honoring DSCP and 802.1p
• MAC Address Mapping to Priority Queue
• QoS Queue Management using Weighted Round Robin
(WRR), Strict Priority (SP), and a combination of WRR
and SP
•
• Broadcast, multicast, and unknow n unicast rate limiti ng
• Inbound rate limiting per port
• Outbound rate limiting per port and per q ueue
• Configuration Logging
• Digital Optical Monitoring
• Display Log Messages on Multiple Ter minals
• Embedded Web Management
• Foundry Discovery Protocol (FDP)
• Industry-Standard Command Line Interfac e (CLI)
• Integration with HP OpenView for Sun Solaris, HP-UX,
IBM AIX, and Windows
• IronView Network Manager (INM) Version 3.2 or la ter
• MIB Support for MRP, Port Security, MAC Authentication,
and MAC-based VLANs
• Out-of-band Ethernet Management
• RFC 783 TFTP
• RFC 854 TELNET Client and Server
• RFC 1157 SNMPv1/v2c
• RFC 1213 MIB-II
• RFC 1493 Bridge MIB
• RFC 1516 Repeater MIB
Policy-controlled MAC-based VLANs
ECMP
Metro-Ring Protocol (v1, v2)
CL Mapping and Marking of ToS/DSCP
CL-based inbound rate limiting and traffic policies
uto Configuration
Page 4 of 6 http://ts.fujitsu.com/storage
DATASHEET IP Switch Brocade FCX648S
A
•
RFC 1573 SNMP MIB II
• RFC 1643 Ethernet Interface MIB
• RFC 1643 Ethernet MIB
• RFC 1724 RIP v1/v2 MIB
• RFC 1757 RMON MIB
• RFC 2068 Embedded HTTP
• RFC 2131 DHCP Relay
• RFC 2570 SNMPv3 Intro to Framework
• RFC 2571 Architecture for Describing SNMP Framework
• RFC 2572 SNMP Message Processing and Dispat ching
• RFC 2573 SNMPv3 Applications
• RFC 2574 SNMPv3 User-based Security Model
• RFC 2575 SNMP View-based Access Control Model
SNMP
• RFC 2818 Embedded HTTPS
• RFC 3176 sFlow
• SNTP Simple Network Time Protocol
• Support for Multiple Syslog Servers
Embedded security •
Bi-level Access Mode (Standard and EXEC Level)
• EAP pass-through support
• IEEE 802.1X username export in sFlow
• Protection against Denial of Service (DOS) attacks
Secure management •
uthentication, Authorization, and Ac counting (AAA)
• Advanced Encryption Standard (AES) with SSHv2
• RADIUS/TACACS/TACACS+
• Secure Copy (SCP)
• Secure Shell (SSHv2)
• Username/Password
Mechanical
Enclosure Side-to-back airflow; 1U, 19-inch EIA-compliant, power from non-
port side
Size Width: 44.0 cm (17.3 in)
Height: 4.4 cm (1.7 in)
Depth: 38.6 cm (15.2 in)
Weight 4.0 kg (8.8 lbs)
Environment
Temperature Operating temperature: 32° to 104°F (0° to 40°C)
Storage temperature: -23° to 158°F (-25° to 70°C)
Humidity Relative humidity: 5% to 95%, non-condens ing
Altitude Storage altitude: 10,000 ft (3000 m) maximum
Acoustic 51 to 63 dB
Power
Power supplies Up to two internal, redundant, field-replaceable, load-sharing AC
power supplies
Power inlet C13
Input voltage Typical 100 to 240 VAC
Input line frequency 50 to 60 Hz
Certification
Electromagnetic emissions FCC Class A (Part 15); EN 55022/CISPR-22 Class A; VCCI Class A
Environmental regulatory compliance
Power and Thermal Specifications
RoHS Compliant (6 of 6); WEEE compliant
Max Current at 100 VAC (Amps) 1.39
Max Current at 200 VAC (Amps) 0.63
Max Total Power Draw1 (Watts) 122
Max System Power Draw2 (Watts) 122
Max Thermal Output3 (BTU/Hr) 416
Energy Efficiency (Watts/Gbps) 1.22
1
-Total power drawn from the source and consum ed by the switch and attached Po E devices. Class 3 d evices assumed on all ports.
2
-Power drawn from the source and consumed onl y by the switch.
3
-Thermal output of the switch.
Page 5 of 6 http://ts.fujitsu.com/storage
DATASHEET IP Switch Brocade FCX648S
FUJITSU PLATFORM SOLUTIONS
In addition to IP Switch Brocade FCX648S,
FUJITSU provides a range of platform
solutions. They combine reliable FUJITSU
products with the best in services, know-how
and worldwide partnerships.
Dynamic Infrastructures
With the FUJITSU Dynamic Infrastructures
approach, FUJITSU offers a full portfolio of IT
products, solutions and services, ranging fro m
clients to datacenter solutions, Managed
Infrastructure and Infrastructure-as-a-Service.
How much you benefit from FUJITSU
technologies and services depends on th e
level of cooperation you choose. This tak es IT
flexibility and efficiency to the nex t level.
Computing Products
www.fujitsu.com/global/services/computing/
Software
www.fujitsu.com/software/
CONTACT
FUJITSU Technology Solutions
Email: storage-pm@ts.fujitsu.com
Website:
http://fujitsu.com
2010-04-12 WW-EN
MORE INFORMATION
Learn more about IP Switch Brocade
FCX648S, please contact your FUJITSU sales
representative or FUJITSU Business partner,
or visit our website.
www.fujitsu.com/
FUJITSU GREEN POLICY INNOVATION
FUJITSU Green Policy Innovation is our
worldwide project for reducing burdens o n the
environment. Using our global know-how, we
aim to resolve issues of environmental e nergy
efficiency through IT. Please find further
information at [http://www.fujitsu.com/
global/about/environment/]
COPYRIGHT
© Copyright 2009 FUJITSU Technology
Solutions
FUJITSU, the FUJITSU logo and FUJITSU
brand names are trademarks or registered
trademarks of FUJITSU Limited in Japan and
other Countries. Other company, product and
service names may be trademarks or
registered trademarks of their respec tive
owners.
DISCLAIMER
Technical data are subject to modificat ion and
delivery subject to availability. Any liabi lity
that the data and illustrations are compl ete,
actual or correct is excluded. Designatio ns
may be trademarks and/or copyrights of t he
respective manufacturer, the use of which by
third parties for their own purposes may
infringe the rights of such owner.
Page 6 of 6 http://ts.fujitsu.com/storage
Loading...