Page 1
©2017 FUJITSU ELECTRONICS INC.
1/9
F-Cue Board
Quick Start Guide
Rev.1.00 2017/01/06
FUJITSU ELECTRONICS INC.
Page 2
Quick Start Guide
2/9
©2017 FUJITSU ELECTRONICS INC.
1. The contents of this document may be changed without prior notice. Please verify with our sales department if you need
any assistance.
2. The data and circuits given in this document are merely examples of using the semiconductor device and are not
intended for installation in equipment that actually used. Further, our company does not bear any liabilities whatsoever
regarding any third patent right violations or other rights violations arising out of the use of these data and circuits.
3. Transferring or copying the contents of this document without prior written permission from our company is prohibited.
4. The semiconductor devices of our company are intended for use in standard applications (office equipment such as
computer, OA, etc., equipment related to industrial, communication, measurement, equipment for personal or home use,
etc.). Customers considering use in special applications (aircrafts, space, nuclear power control, life sustaining medical
applications, etc.) such as in equipment wherein any fault or wrong operation of these semiconductors can directly cause
a threat to human life, or is likely to cause damage to human body, or wherein extremely high reliability is required are
requested to consult our sales department before using.
5. Failures of semiconductor devices occur at certain probabilistic rates. The customers are requested to carry out safety
designs such as equipment redundancy design, fire spreading countermeasure design, overcurrent prevention
countermeasure design, wrong operation prevention design, etc., so that, even if our company’s semiconductior device
fails, as a result human injury accidents, fire accidents, and accidents causing social damage do not occur.
6. When the product described in this document comes under the goods or technology restricted under the Foreign
Exchange and Foreign Trade Act of Japan, permission from the concerned authority is required at the time of exporting
this product.
©2017 FUJITSU ELECTRONICS INC. Printed in Japan
Warning
1. Bluetooth Qualification
F-Cue Board is equipped with TAIYO YUDEN's module, WYSBHVGXG, certified Bluetooth authentication. The Linux BSP
pre-installed in eMMC memory doesn't include Bluetooth-profile and Bluetooth-protocol. Therefore, please obtain the profile and
protocol that you need by yourself.
If you are to manufacture and sell your products that use Bluetooth functions of F-Cue Board, you must join Bluetooth SIG and
obtain Bluetooth Qualification.
2. HDMI Licenses
If you are to manufacture and sell your products that use HDMI functions of F-Cue Board, you must obtain licenses with respect to
HDMI functions from HDMI Licensing, LLC (http://www.hdmi.org/) which administers HDMI licenses.
3. HDCP Licenses
F-Cue Board does not support HDCP functions. If you need F-Cue Board to support HDCP functions, you must obtain licenses
with respect to HDCP functions from Digital Content Protection, LLC (https://www.digital-cp.com/licensing) which administers HDCP
licenses. Please contact us for further information.
Page 3
Quick Start Guide
©2017 FUJITSU ELECTRONICS INC.
3/9
Contents
1. Introduction .............................................................................................................................................................................................. 4
2. Package Contents ................................................................................................................................................................................... 5
3. Getting Started ........................................................................................................................................................................................ 6
4. Hardware Issues...................................................................................................................................................................................... 8
4.1. Known issues ................................................................................................................................................................................................................ 8
4.2. Fixed issues ................................................................................................................................................................................................................... 8
Page 4
4/9
©2017 FUJITSU ELECTRONICS INC.
1. Introduction
Thank you for buying F-Cue Board.
This document is a User’s Guide that describes the quick start of prebuild Linux kernel on F-Cue Board.
Quick Start Guide
Page 5
Quick Start Guide
©2017 FUJITSU ELECTRONICS INC.
5/9
No.
Name
Model number
Quantity
Note 1 F-Cue Board
MSB7701-C01
1
AC Adapter not included.
2
F-Cue Extension Board
MSB7701-E01
1
Optional products.
No.
Name
Note 1 AC Adapter
Conform to the 96boards standard.
2
USB mouse and keyboard
-
3
HDMI monitor and cable
-
2. Package Contents
The following table is a composition list of this product.
Prepare the following items.
Page 6
6/9
©2017 FUJITSU ELECTRONICS INC.
3. Getting Started
Switch name
Default configuration
BOOT SEL[4:1]
4:OFF, 3:OFF, 2:ON, 1:ON [eMMC card boot]
Boot device
4 3 2 1 Note
eMMC
OFF
OFF
ON
ON
Default setting
micro SD card
OFF
ON
ON
ON
-
1
2
3
4
O
F
F
BOOT SEL
Power supply button
The F-Cue Board ships with a default configuration for use. Please check following Switch.
You can change the boot device for U-Boot by setting SW<BOOT SEL>.
Quick Start Guide
Follow these steps to boot Linux on F-Cue Board.
Connect the HDMI cable between the monitor and F-Cue Board.
Connect the mouse and the keyboard to F-Cue Board..
Plug the supplied adapter into the DC-jack and a wall outlet.
Turn on the Power supply button.
Page 7
Quick Start Guide
©2017 FUJITSU ELECTRONICS INC.
7/9
At this point, Linux Kernel starts. After start completion, a Kernel prompt is indicated at HDMI monitor.
Page 8
8/9
©2017 FUJITSU ELECTRONICS INC.
4. Hardware Issues
No.
Function
Description
I2016.12-1-1
Reset button
Reset button is not available.
- - -
No.
Function
Description
Fixed Version
- - - -
4.1. Known issues
4.2. Fixed issues
Quick Start Guide
Page 9
Quick Start Guide
©2017 FUJITSU ELECTRONICS INC.
9/9
Date
Version
Description
2017/01/06
1.00
First Edition
Revision History
Loading...