Fujitsu FBR211SAD001-n, FBR211NBD001-n, FBR211NAD001-n, FBR211SBD001-n, FBR211SAD003-n User Manual

MINIATURE RELAY

1 POLE—1 to 2 A (FOR SIGNAL SWITCHING)

FBR211 SERIES

n FEATURES

l 2 A maximum carrying current

Capable of 2 A maximum continuous carrying current in the

contact

l Superior reliability gold-overlay contacts

DISCONTINUED

P type: Gold-overlay silver-palladium contacts

l International terminal pitch of one inch grid terminal layout
l High sensitivity, low power dissipation types also available

Standard types: 0.45 W (A or B type)
High sensitivity types: 0.2 W (C or E type)

l Conforms to FCC 68.302 (high dielectric strength type)
l UL recognized (File number E63615)
l CSA recognized (File number LR64026)
l RoHS compliant since date code: 0433A

Please see page 5 for more information

n ORDERING INFORMATION

FBR211 S A D012 U – P 2 (–CSA)
[Example] (a) (b) (c) (d) (e) (f) (g) (h)

RoHS compliant

(a) Series Name FBR211

(b) Enclosure S: Flux free type
N: Plastic sealed type

A: Standard A type } (nominal power 450 mW type)
(c) Coil Power and Schematics B: Standard B type
C: High sensitivity C type } (nominal power 200 mW type)
E: High sensitivity E type

(d) Nominal Voltage (Example) D003: 3 VDC
D012: 12 VDC (refer to the COIL DATA CHART)

(e) UL Marking on Cover Nil : No UL marking
U : UL marking

(f) Contact Material P : Gold-overlay silver-palladium
M : Gold-overlay silver

(g) Special Type Nil : Standard
2 : High dielectric strength type

(h) CSA Marking Nil : Standard

-CSA : UL + CSA marking (valid when (e) is U)

Note: The designation name is stamped on the top of the relay case as follows:
(Example) Designation ordered: FBR211SAD005-P
Stamp: 211SAD005-P

(1998)

1

n COIL DATA CHART

1. STANDARD (A or B type)

FBR211 SERIES

MODEL

A type B type resistance

Flux free

FBR211SAD001-n FBR211NAD001-n FBR211SBD001-n FBR211NBD001-n 1.5 VDC 5 Ω 300 mA

FBR211SAD003-n FBR211NAD003-n FBR211SBD003-n FBR211NBD003-n 3 VDC 20 Ω 150 mA

FBR211SAD005-n FBR211NAD005-n FBR211SBD005-n FBR211NBD005-n 5 VDC 56 Ω 89 mA

FBR211SAD006-n FBR211NAD006-n FBR211SBD006-n FBR211NBD006-n 6 VDC 80 Ω 75 mA of nominal of nominal nominal 450 mW 45 deg

FBR211SAD009-n FBR211NAD009-n FBR211SBD009-n FBR211NBD009-n 9 VDC 180 Ω 50 mA voltage) voltage)

DISCONTINUED

FBR211SAD012-n FBR211NAD012-n FBR211SBD012-n FBR211NBD012-n 12 VDC 320 Ω 38 mA

FBR211SAD024-n FBR211NAD024-n FBR211SBD024-n FBR211NBD024-n 24 VDC 1,280 Ω 19 mA

Note: All values in the table are measured at 20°C.

2. HIGH SENSITIVITY (C or E type)

MODEL

C type E type resistance

Flux free

FBR211SCD001-n FBR211NCD001-n FBR211SED001-n FBR211NED001-n 1.5 VDC 12 Ω 125 mA

FBR211SCD003-n FBR211NCD003-n FBR211SED003-n FBR211NED003-n 3 VDC 45 Ω 67 mA

FBR211SCD005-n FBR211NCD005-n FBR211SED005-n FBR211NED005-n 5 VDC 120 Ω 42 mA

FBR211SCD006-n FBR211NCD006-n FBR211SED006-n FBR211NED006-n 6 VDC 180 Ω 33 mA of nominal of nominal nominal 200 mW 25 deg

FBR211SCD009-n FBR211NCD009-n FBR211SED009-n FBR211NED009-n 9 VDC 400 Ω 23 mA voltage) voltage)

FBR211SCD012-n FBR211NCD012-n FBR211SED012-n FBR211NED012-n 12 VDC 700 Ω 17 mA

FBR211SCD024-n FBR211NCD024-n FBR211SED024-n FBR211NED024-n 24 VDC 2,800 Ω 9 mA

Note: All values in the table are measured at 20°C.

Plastic sealed

Plastic sealed

Flux free

Flux free

Plastic sealed

Plastic sealed

Nominal Coil current Must Must Maximum

voltage

Nominal Coil current Must Must Maximum

voltage

(±10%)

(±10%)

(at nominal

(at nominal

Nominal

voltage)

Nominal

voltage)

operate release allowable

voltage voltage voltage

approx.

70% max. 10% min. 150% of Approx. Approx.

voltage voltage voltage (at nominal (at nominal

operate release allowable

voltage voltage voltage

approx.

70% max. 10% min. 225% of Approx. Approx.

voltage voltage voltage (at nominal (at nominal

Nominal

Nominal

power

power

Coil

temperature

rise

Coil

temperature

rise

(1998)

2

FBR211 SERIES

n SPECIFICATIONS

Item Standard (A or B type) High sensitive (C or E type)

Contact Arrangement 1 form C (SPDT)

Material Gold-overlay silver-palladium / gold-overlay silver

Resistance (initial) Maximum 100 mΩ (at 0.1 A 6 VDC)

Rating (resistive) 0.5 A 120 VAC or 1 A 28 VDC

Maximum Carrying Current 2 A

Maximum Switching Power 60 VA or 28 W

Max. Switching Voltage*1 220 VAC or 150 VDC

DISCONTINUED

Maximum Switching Current 1.25 A (AC) or 2 A (DC)

Minimum Switching load*2 Plastic sealed 1 mA, 1V
(reference) Flux free 1 mA, 5V

Coil Nominal Power (at 20°C) Approximately 450 mW Approximately 200 mW

Operate Power (at 20°C) Approximately 315 mW maximum Approximately 140 mW maximum

Operating Temperature –25°C to +55°C (no frost) –25°C to +75°C (no frost)

Operating Humidity 45 to 85%RH

Time Value Operate (at nominal voltage) Maximum 5 ms

Release (at nominal voltage) Maximum 5 ms

Life Mechanical 5 × 106 operations minimum

Electrical 3 × 105 operations minimum (at 1 A/ 28 VDC resistive load)

1 × 105 operations minimum (at 0.5 A/120 VDC resistive load)

Other Vibration Resistance 10 to 55 Hz (double amplitude of 1.5 mm)

Shock Misoperation 100 m/s2 (11±1 ms) 60 m/s2 (11±1 ms)
Resistance

Endurance 1,000 m/s2 (11±1 ms)

Weight Approximately 4 g

*1 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type

of load.

*2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum

switching load varies with the switching frequency and operation environment.

(Refer to the REFERENCE DATA)

1 × 105 operations minimum (at 2 A/ 12 VDC resistive load)

n INSULATION

Item Standard (A or B) High sensitive (C or E)

Isolation (initial) Minimum 100 MΩ (at 500VDC)

Dielectric
Strength

n SAFETY STANDARDS

Type Compliance Contact rating

UL UL 110

E63615

CSA C22.2 No. 14

LR 40304, LR 46016

(1998)

500VAC 1 min. (standard)
1,500VAC 1 min. (high isolation coil and contact)

Flammability: UL 94-V0 (plastics)

0.5A, 120VAC (resistive)
1A, 28VDC (resistive)

3

FBR211 SERIES

70

80

90

100

110

120

130

140

150

160

0 10 20 30 40 50 60 70–10

Operating voltage range

Must operate voltage

Range of operation temperature and voltage

(Standard 0.45 W type)

Operating temperature (°C)

80

Maximum allowable coil voltage

70

80

90

100

110

120

130

140

150

160

0 10 20 30 40 50 60 70–10

Operating voltage range

Must operate voltage

Operating temperature (°C)

80

(Data) assumes that
the maximum allow­ able temperature
of E type insula­ tion coil is
115°C

0

0.2 0.4 0.6 0.8

1

2

3

4

5

Not including bounce time

Coil power (W)

Operate and release time data

Time (msec)

(Data) assumes that
the maximum allow­ able temperature
of E type insula­ tion coil is 115°C

Nominal voltage multiplying factor (%)

Range of operation temperature and voltage

(high sensitive 0.2 W type)

Release time

Operate time

Nominal voltage multiplying factor (%)

Maximum allowable coil voltage

0.1

10

20 30 50 120

0.3

0.5

1.0





Maximum switching capacity

Contact load current (A)

12 V DC
resistive load

28 V DC
resistive load

Life curve

Service life (operations)

1

0.50 1.0 1.5 2.0

5

10

50

100

200

(x10 )

4

Contact load current (A)

120 V AC
resistive load

20

30

40

50

60

70

0.4 0.6 0.80.2





(at 20°C)



Standard

(0.45 W type)



High sensitive

(0.2 W type)

Coil power (W)

Coil temperature rise data

Coil temperature rise (°C)

Contact load current (A)



AC resistive load

(○ AC contact rating)



DC resistive load

( DC contact rating)

FBR211

n = 100

Operate

Release

Distribution of operate and release voltage

Nominal voltage multiplying factor (%)

60

50

40

20

30

10

0 10 20 30 40 50 60 70 80

0

Distribution (%)

FBR211

n = 100

Operate

Release

Distribution of operate and release time

100

80

60

20

40

0 1 2 3 4 5 6 7 8

0

Contact resistance (mΩ)

Distribution of contact resistance

FBR211

n = 100

80

60

40

20

0 10 20 30 40 50 60 70 80

0

Distribution (%)

Distribution (%)

n CHARACTERISTIC DATA

DISCONTINUED

n REFERENCE DATA

(1998)

4

FBR211 SERIES

10.1

15.1

0.35

Schematics (BOTTOM VIEW)

0.6

(1.2)

10.16

3.2

2.54

5

8

Dimensions

6

7

1

12

(A type or C type)

586

7

1

12

7.62 (1.24)

10.5

+

0.5

0.3

+

0.5

+

0.5

(B type or E type)

11.7

16.5

Dimensions

0.6

(1.9)

10.16

3.2

2.54

586

7

1

12

(A type or C type)

586

7

1

12

7.62 (2.04)

10.7

+

0.5

0.3

Schematics (BOTTOM VIEW)

+

0.5

+

0.5

(B type or E type)

7.62

6–ø1.0

10.16

PC board mounting hole layout (BOTTOM VIEW)

2.54

n DIMENSIONS

1. STANDARD (Flux free type)

DISCONTINUED

2. N-TYPE (Plastic sealed type)

3. PC BOARD MOUNTING HOLE LAYOUT

(1998)

Unit: mm

5

FBR211 SERIES

RoHS Compliance and Lead Free Relay Information

1. General Information

l Relays produced after the specic date code that is indicated on each data sheet are lead-free

now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info.
(http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf)

l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu.
l All signal and most power relays also comply with RoHS. Please refer to individual data

sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that
are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE).

DISCONTINUED

l

It has been veried that using lead-free relays in leaded assembly process will not cause any

problems (compatible).

l “LF” is marked on each outer and inner carton. (No marking on individual relays).
l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales ofce.
l We will ship leaded relays as long as the leaded relay inventory exists.

Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC)

2. Recommended Lead Free Solder Prole

l Recommended solder paste Sn-3.0Ag-0.5Cu.

Reow Solder condition

Flow Solder condition:

Pre-heating: maximum 120˚C

Soldering: dip within 5 sec. at

260˚C soler bath

Solder by Soldering Iron:

Soldering Iron

Temperature: maximum 360˚C

Duration: maximum 3 sec.

We highly recommend that you conrm your actual solder conditions

3. Moisture Sensitivity

l Moisture Sensitivity Level standard is not applicable to electromechanical realys.

(1998)

4. Tin Whisker

l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in

house test.

6

Fujitsu Components International Headquarter Ofces

FBR211 SERIES

Japan

Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan

Tel: [phone]
Fax: [phone]

Email: [e-mail]
Web: www.fcl.fujitsu.com

DISCONTINUED

North and South America

Fujitsu Components America, Inc.
250 E. Caribbean Drive

Sunnyvale, CA 94089 U.S.A.
Tel: [phone]
Fax: [phone]

Email: [e-mail]
Web: http://www.fujitsu.com/us/services/edevices/components/

©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.

Fujitsu Components America or its afliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or its afliates reserve the right to change specications/datasheets without prior notice.

Rev. January 18, 2008.

Europe

Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands

Tel: [phone]
Fax: [phone]

Email: [e-mail]
Web: emea.fujitsu.com/components/

Asia Pacic

Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex

Singapore 118529

Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web: http://www.fujitsu.com/sg/services/micro/components/

(1998)

7