Fujitsu FBR211 User Manual

MINIATURE RELAY

1 POLE—1 to 2 A (FOR SIGNAL SWITCHING)

FBR211 SERIES

n FEATURES

l 2 A maximum carrying current

Capable of 2 A maximum continuous carrying current in the

contact

l Superior reliability gold-overlay contacts

P type: Gold-overlay silver-palladium contacts

l International terminal pitch of one inch grid terminal layout l High sensitivity, low power dissipation types also available

Standard types: 0.45 W (A or B type) High sensitivity types: 0.2 W (C or E type)

l Conforms to FCC 68.302 (high dielectric strength type) l UL recognized (File number E63615) l CSA recognized (File number LR64026) l RoHS compliant since date code: 0433A

Please see page 5 for more information

n ORDERING INFORMATION

FBR211 S A D012 U – P 2 (–CSA) [Example] (a) (b) (c) (d) (e) (f ) (g) (h)

RoHS compliant

(a) Series Name FBR211

(b) Enclosure S: Flux free type N: Plastic sealed type

}

A: Standard A type (c) Coil Power and Schematics B: Standard B type C: High sensitivity C type E: High sensitivity E type

(d) Nominal Voltage (Example) D003: 3 VDC D012: 12 VDC (refer to the COIL DATA CHART)

(e) UL Marking on Cover Nil : No UL marking U : UL marking

(f) Contact Material P : Gold-overlay silver-palladium M : Gold-overlay silver

(g) Special Type Nil : Standard 2 : High dielectric strength type

(h) CSA Marking Nil : Standard

-CSA : UL + CSA marking (valid when (e) is U)

Note: The designation name is stamped on the top of the relay case as follows: (Example) Designation ordered: FBR211SAD005-P Stamp: 211SAD005-P

(nominal power 450 mW type)

}

(nominal power 200 mW type)

n COIL DATA CHART

1. STANDARD (A or B type)

FBR211 SERIES

MODEL

A type B type resistance

Flux free

FBR211SAD001-n FBR211NAD001-n FBR211SBD001-n FBR211NBD001-n 1.5 VDC 5 Ω 300 mA

FBR211SAD003-n FBR211NAD003-n FBR211SBD003-n FBR211NBD003-n 3 VDC 20 Ω 150 mA

FBR211SAD005-n FBR211NAD005-n FBR211SBD005-n FBR211NBD005-n 5 VDC 56 Ω 89 mA

FBR211SAD006-n FBR211NAD006-n FBR211SBD006-n FBR211NBD006-n 6 VDC 80 Ω 75 mA of nominal of nominal nominal 450 mW 45 deg

FBR211SAD009-n FBR211NAD009-n FBR211SBD009-n FBR211NBD009-n 9 VDC 180 Ω 50 mA voltage) voltage)

FBR211SAD012-n FBR211NAD012-n FBR211SBD012-n FBR211NBD012-n 12 VDC 320 Ω 38 mA

FBR211SAD024-n FBR211NAD024-n FBR211SBD024-n FBR211NBD024-n 24 VDC 1,280 Ω 19 mA

Note: All values in the table are measured at 20°C.

Plastic sealed

Flux free

Plastic sealed

Nominal Coil current Must Must Maximum

voltage

(±10%)

(at nominal

Nominal

voltage)

operate release allowable

voltage voltage voltage

approx.

70% max. 10% min. 150% of Approx. Approx.

voltage voltage voltage (at nominal (at nominal

Nominal

power

Coil

temperature

rise

2. HIGH SENSITIVITY (C or E type)

MODEL

C type E type resistance

Flux free

FBR211SCD001-n FBR211NCD001-n FBR211SED001-n FBR211NED001-n 1.5 VDC 12 Ω 125 mA

FBR211SCD003-n FBR211NCD003-n FBR211SED003-n FBR211NED003-n 3 VDC 45 Ω 67 mA

FBR211SCD005-n FBR211NCD005-n FBR211SED005-n FBR211NED005-n 5 VDC 120 Ω 42 mA

FBR211SCD006-n FBR211NCD006-n FBR211SED006-n FBR211NED006-n 6 VDC 180 Ω 33 mA of nominal of nominal nominal 200 mW 25 deg

FBR211SCD009-n FBR211NCD009-n FBR211SED009-n FBR211NED009-n 9 VDC 400 Ω 23 mA voltage) voltage)

FBR211SCD012-n FBR211NCD012-n FBR211SED012-n FBR211NED012-n 12 VDC 700 Ω 17 mA

FBR211SCD024-n FBR211NCD024-n FBR211SED024-n FBR211NED024-n 24 VDC 2,800 Ω 9 mA

Note: All values in the table are measured at 20°C.

Plastic sealed

Flux free

Plastic sealed

Nominal Coil current Must Must Maximum

voltage

(±10%)

Nominal

(at nominal

voltage)

operate release allowable

voltage voltage voltage

approx.

Nominal

power

70% max. 10% min. 225% of Approx. Approx.

voltage voltage voltage (at nominal (at nominal

Coil

temperature

rise

FBR211 SERIES

n SPECIFICATIONS

Item Standard (A or B type) High sensitive (C or E type)

Contact Arrangement 1 form C (SPDT)

Material Gold-overlay silver-palladium / gold-overlay silver

Resistance (initial) Maximum 100 mΩ (at 0.1 A 6 VDC)

Rating (resistive) 0.5 A 120 VAC or 1 A 28 VDC

Maximum Carrying Current 2 A

Maximum Switching Power 60 VA or 28 W

Max. Switching Voltage*

Maximum Switching Current 1.25 A (AC) or 2 A (DC)

Minimum Switching load* (reference) Flux free 1 mA, 5V

Coil Nominal Power (at 20°C) Approximately 450 mW Approximately 200 mW

Operate Power (at 20°C) Approximately 315 mW maximum Approximately 140 mW maximum

Operating Temperature –25°C to +55°C (no frost) –25°C to +75°C (no frost)

Operating Humidity 45 to 85%RH

Time Value Operate (at nominal voltage) Maximum 5 ms

Release (at nominal voltage) Maximum 5 ms

Life Mechanical 5 × 10

Electrical 3 × 10

1 × 10

Other Vibration Resistance 10 to 55 Hz (double amplitude of 1.5 mm)

Shock Misoperation 100 m/s Resistance

Endurance 1,000 m/s

Weight Approximately 4 g

*1 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type

of load.

*2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum

switching load varies with the switching frequency and operation environment.

(Refer to the REFERENCE DATA)

220 VAC or 150 VDC

Plastic sealed 1 mA, 1V

operations minimum

operations minimum (at 1 A/ 28 VDC resistive load)

1 × 105 operations minimum (at 2 A/ 12 VDC resistive load)

operations minimum (at 0.5 A/120 VDC resistive load)

(11±1 ms) 60 m/s2 (11±1 ms)

(11±1 ms)

n INSULATION

Item Standard (A or B) High sensitive (C or E)

Isolation (initial) Minimum 100 MΩ (at 500VDC)

Dielectric Strength

500VAC 1 min. (standard) 1,500VAC 1 min. (high isolation coil and contact)

n SAFETY STANDARDS

Type Compliance Contact rating

UL UL 110

E63615

CSA C22.2 No. 14

LR 40304, LR 46016

Flammability: UL 94-V0 (plastics)

0.5A, 120VAC (resistive) 1A, 28VDC (resistive)

+ 4 hidden pages