F-10C_EN_ninshou
Children using the equipment should be
instructed in proper operation by an
adult. Do not allow them to use the
Do
equipment without adult supervision.
May cause injuries.
Store the equipment out of reach of
small children.
May be accidentally swallowed or cause
Do
injuries.
Be careful especially when using FOMA
terminal connected to the adapter
continuously for a long time.
Do
If you use i-αppli, a videophone call or 1Seg
watching while charging the battery for a long
time, FOMA terminal, battery pack and adapter
may be heated.
Directly touching a hot part for a long time, you
may have redness, itching or rash on your skin,
or it may result in low-temperature burns
depending on your constitution and/or health
condition.
Handling FOMA terminal
WARNING
Do not direct the infrared data port
toward your eye and transmit signals.
May cause harmful effect on eyes.
Don’t
Do not direct the infrared data port
toward home electric appliances etc.
equipped with infrared device when
Don’t
using infrared communication.
May cause an accident because of malfunction
of infrared device.
Do not turn on the light by getting the
lighting part closer to other person's
eyes.
Don’t
May impair eyesight. And may cause accidents
like injury etc., by dazzling or astounding other
people.
Do not put foreign objects such as liquid
like water, metal pieces or burnable
things into UIM or microSD card slot.
Don’t
May cause fire, burns, injuries, electric shock.
Do not turn on the light aiming directly
at the driver of the car etc.
May disturb driving and cause an accident.
Don’t
Turn FOMA terminal OFF in areas where
use is prohibited, such as in airplanes
and hospitals.
Do
Failure to do so may cause electronic equipment
or electronic medical equipment to fail or
malfunction. If the function which automatically
turns the power ON is set, cancel the setting
before turning the power OFF.
When using the phone in a medical facility, be
sure to observe the regulations of the facility. If
you do prohibited act such as using the phone in
an airplane, you will be punished according to
law.
When you talk by setting handsfree or
ring alert is sounding, keep FOMA
terminal away from your ear.
Do
And, when connecting the earphone/
microphone etc. to the FOMA terminal
and play a game or music, adjust the
volume moderately.
Too loud volume may cause a hearing loss.
And, if you cannot hear the sound around you
clearly, it may cause an accident.
Introduction
9
F-10C_EN_ninshou
Introduction
10
If you have weak heart, be careful when
setting the Vibrate alert (vibration) or
alert volume setting.
Do
May cause harmful effect on heart.
When you use electronic medical
equipment, check with the equipment
manufacturer to determine how the
Do
device is affected by radio waves before
using.
May cause harmful effect on electronic medical
equipment etc.
Turn FOMA terminal OFF near highprecision electronic control equipment
or electronic equipment using low-
Do
power signals.
Failure to do so may cause the equipment to fail
or malfunction.
* Examples of electronic equipment to avoid.
Hearing aids, implanted pacemakers or defibrillators,
other electronic medical equipment, fire alarms,
automatic doors and other automatic control
equipment.
Users wearing implanted pacemakers or defibrillators
or other electronic medical equipment should check
with the manufacturer or sales outlet about the effect
of radio frequencies on the equipment.
When the display or camera lens is
accidentally broken, be careful of
broken glass or exposed internal parts
Do
of FOMA terminal.
Surfaces of display and camera lens are made of
plastic panels and they are structured for the
glass not to scatter, however, if you mistakenly
touch broken or exposed parts, you may be
injured.
To sound the high-pitched alarm,
always keep FOMA terminal away from
your ears.
Do
Failure to do so may cause hearing defect.
CAUTION
Do not swing FOMA terminal by
antenna or its strap.
May cause accident such as injury to yourself or
Don’t
others by hitting.
Do not use damaged FOMA terminal.
May cause fire, burns, injuries, electric shock.
Don’t
When using the motion tracking or
motion sensor, check the safety around
you, hold FOMA terminal firmly, and do
Don’t
not shake it unnecessarily.
May cause accident such as injuries.
If the display part is accidentally broken
and the liquid crystal leaks out, do not
make the substance contact with your
Don’t
skin of face or hands.
May cause loss of sight or skin problems.
If the liquid crystal gets into your eyes or mouth,
rinse it with clean water and see a doctor
immediately.
And, if the liquid adheres to skin or clothing, use
alcohol etc. to wipe it off, then wash with soap.
To use the terminal in car, check with
automobile manufacturer or dealer to
determine how the device is affected by
Do
radio waves before using.
In rare cases, using the phone in some vehicle
models can cause the vehicle's electronic
equipment to malfunction. In that case, stop
using the terminal immediately.
Mobile phones can give some users skin
problems such as itching, allergic
reactions or rashes. If you develop skin
Do
problems, stop using the phone
immediately, and see a doctor.
"Material list (P14)"
⇒
F-10C_EN_ninshou
When opening or closing FOMA
terminal, take care not to have your
fingers or strap caught by the terminal.
Do
May cause accident such as injuries.
When watching the display, take a
certain distance from the display in a
fully bright place.
Do
May reduce visual acuity.
Handling battery pack
■
Check that the battery type matches the type
displayed on the battery pack label.
Display Battery type
Li-ion 00 Li-ion battery
DANGER
Do not connect a wire or other metal
objects to the jack. And, do not carry or
store FOMA terminal with objects like a
Don’t
metal necklace.
May cause the battery pack to ignite, burst, heat
or leak.
Check the orientation of battery pack to
install it to FOMA terminal, and do not
try to force the battery pack onto FOMA
Don’t
terminal if you are having trouble
installing it.
May cause battery pack to ignite, burst, heat or
leak.
Do not throw the battery pack into the
fire.
May cause battery pack to ignite, burst, heat or
Don’t
leak.
Do not nail the battery pack, hit with a
hammer or step on it.
May cause battery pack to ignite, burst, heat or
Don’t
leak.
If the battery pack's fluid etc. contacts
eyes, immediately flush the eyes with
clean water and see a doctor right
Do
away. Do not rub the eyes.
May cause loss of sight.
WARNING
If the battery pack seems to have
abnormalities such as deformation or
scratches due to falling, never use it.
Don’t
May cause battery pack to ignite, burst, heat or
leak.
If the battery pack leaks or gives off a
strange smell, immediately remove it
from the vicinity of open flames.
Do
The vapors from leaking battery pack fluid may
ignite or explode.
Be careful not to let your pet bite the
battery pack.
May cause battery pack to ignite, burst, heat or
Do
leak.
CAUTION
Do not discard old battery packs
together with other garbage.
May cause igniting or environmental
Don’t
destruction. Tape the terminals of old battery
packs to insulate them, and then bring them into
a sales outlet such as docomo Shop. If your local
municipality has a battery recycling program,
dispose of them as provided for.
Introduction
11
F-10C_EN_ninshou
Do not use or charge a wet battery pack.
May cause battery pack to ignite, burst, heat or
leak.
Don’t
If fluid etc. leaks out from the battery
pack, do not make the fluid contact with
your skin of face or hands.
Do
Introduction
May cause loss of sight or skin problems.
If the fluid etc. put into your eyes or mouth, or
contacts skin or clothes, immediately flush the
contacted area with clean water.
If the fluid put into the eyes or mouth,
immediately see a doctor after flushing.
Handling adapter and desktop
holder
WARNING
Do not use the adapter cord if it gets
damaged.
May cause fire, burns, electric shock.
Don’t
Do not use the AC adapter or desktop
holder in a bathroom or other highly
humid area.
Don’t
May cause fire, burns, electric shock.
Always use the DC adapter with a
negative-ground vehicle. Do not plug it
into a positive-ground vehicle.
Don’t
May cause fire, burns, electric shock.
When it starts to thunder, do not touch
adapter.
May cause electric shock.
Don’t
12
Do not short the charging jack while it is
connected to the outlet or cigarette
lighter socket. Do not touch the
Don’t
charging jack with a part of your body
such as your hand or finger.
May cause fire, burns, electric shock.
Do not place heavy objects on the
adapter cord.
May cause fire, burns, electric shock.
Don’t
When you insert and remove AC
adapter from power outlet, do not
contact a metal strap or other metal
Don’t
objects with the jack.
May cause fire, burns, electric shock.
Do not touch the adapter cord, desktop
holder or outlet with wet hands.
May cause fire, burns, electric shock.
No wet hands
Only use with the specified power
source and voltage.
When charging FOMA terminal
Do
overseas, use AC Adapter for global use.
If incorrect voltage is used, this may cause fire,
burns or electric shock.
AC adapter : AC100V
DC adapter : 12 or 24V DC (specific for negative
ground vehicle)
AC adapter for global use : Between 100V and
240V AC (Connect to the AC outlet for internal
household use)
If the DC adapter's fuse blows, replace it
only with the specified fuse.
May cause fire, burns, electric shock. For the
Do
specified fuse, see the instructions that come
with the DC adapter.
Wipe off any dust that accumulates on
the power plug.
Failure to do so may cause fire, burns, electric
Do
shock.
F-10C_EN_ninshou
When you connect the AC adapter to an
outlet, firmly connect to the outlet.
Failure to do so may cause fire, burns, electric
Do
shock.
When you disconnect the adapter from
the outlet or cigarette lighter socket, do
not pull the adapter cord with excessive
Do
force. Instead, hold the power plug to
disconnect.
May cause fire, burns, electric shock.
Always remove the power plug from
the outlet or cigarette lighter when not
using the adapter for an extended
Unplug
period.
Failure to do so may cause fire, burns, electric
shock.
Immediately remove the power plug
from the outlet or cigarette lighter
socket if water or other fluids get into
Unplug
the adapter.
Failure to do so may cause fire, burns, electric
shock.
Always remove the power plug from
the cigarette lighter socket when
cleaning the equipment.
Unplug
Failure to do so may cause fire, burns, electric
shock.
Handling UIM
CAUTION
Be careful of the cut surface when
removing UIM.
May cause injuries.
Do
Handling mobile phones near
electronic medical equipment
■
These precautions are based on the guidelines
produced at the Electromagnetic Compatibility
Conference Japan, regarding the protection of
electronic medical equipment from radio
waves emitted by mobile phone units.
WARNING
Obey the following rules inside medical
facilities.
･
Do not bring FOMA terminal into operating
Do
rooms (ORs), intensive care units (ICUs) or
coronary care units (CCUs).
･
Turn FOMA terminal OFF in hospital wards.
･
Turn FOMA terminal OFF in hospital lobbies
and corridors if electronic medical equipment
could be nearby.
･
If the medical facility has specified zones
where use or possession of mobile devices is
prohibited, obey those instructions.
･
If the function to automatically turn ON the
power is set, cancel the setting before turning
the power OFF.
Turn FOMA terminal OFF in crowded
trains or other public places where
pacemaker or defibrillator wearers
Do
could be nearby.
FOMA terminal's signals may affect the
operation of implanted pacemakers or
defibrillators, and other devices.
Wearers of implanted pacemakers or
defibrillators must carry and use FOMA
terminal at least 22 cm away from the
Do
implanted device.
FOMA terminal's signals may affect the
operation of implanted pacemakers or
defibrillators, and other devices.
Introduction
13
F-10C_EN_ninshou
When electronic medical equipment
other than implanted pacemakers or
defibrillators are in use outside of
Do
medical facilities (such as in home care
settings), check with the device
manufacturer to determine how the
Introduction
device is affected by electrical signals.
FOMA terminal's signals may affect the
performance of electronic medical equipment.
Material list
Part Material
Exterior
case
Display panel Hardened
Movable
part Display
Movable
part Rear
surface
Fixed part
Keypad
Fixed part
Battery
Back cover PC+ABS
Back cover
lock lever
Back cover
lock plate
Back cover
(body)
Back cover
(gasket)
Surface
PC resin UV hard
PA-GF resin UV hard
PA-GF resin UV hard
PC+ABS
resin
resin
POM resin None
Stainless
steel
Stainless
steel
Silicon
rubber
glass
treatment
coating
coating
coating
UV hard
coating
UV hard
coating
None
None
None
Shatterproof
film
UV hard
coating
シ
None
coating
coating
coating
None
None
Gold plating
Tin plating
coating
Surface
treatment
Part Material
Camera lens Camera
Light lens PC resin None
Side keys PC resin UV hard
Keypad PC resin UV hard
External
connection
jack cap
Charging
jack
External connection jack Stainless
Facing sheet around
keypad
panel
Camera ring
(Color:
BLACK,
RED)
Camera ring
(Color:
WHITE)
Body PC resin UV hard
Flexure Elastomer
Water stop PC resin None
Water stop
rubber
Contacts Stainless
Attaching
holder
section
High heat
resistance
transparent
material (
ルプラス®)
ABS resin Chrome-plating
Acrylate
resin
resin (TPE)
Silicon
rubber
steel
LCP resin None
steel
PET resin UV hard
14
F-10C_EN_ninshou
Part Material
Movable
part/Rear
surface
Screw (battery install
recess)
Battery install recess face PC board Gold plating
Battery
contacts
Battery pack Battery pack PC resin None
Fingerprint sensor Flexible PC
UIM tray POM resin None
Facing panel ABS resin UV hard
Corner pad Elastomer
Screw sheet Polyester
Battery
contacts
connector
Battery
contacts
Contacts Beryllium
resin (TPEE)
film
Stainless
steel
PPS resin None
Beryllium
copper
copper
board
Surface
treatment
coating
None
None
None
Gold plating
(base : Ni-Pd
plating)
Gold plating
None
Introduction
15
F-10C_EN_ninshou
Handling precautions
General
・
F-10C is waterproof/dustproof, however, do not allow
water or dust to seep into FOMA terminal and do not
Introduction
allow accessories or optional devices to get wet or let
dust attach.
- Battery pack, adapter, UIM are not waterproof/
dustproof. Do not use in a bathroom or other highly
humid area or do not let rain attached. Or putting the
terminal on your body, humidity of sweat may cause
internal corrosion and malfunction. Note that
malfunctions, which are determined to be caused by
water as result of inspections, are not covered by the
warranty. Since these conditions are outside the scope
of the warranty, a repair, if at all possible, is charged.
・
Clean FOMA terminal with a dry soft cloth (such as a
cloth for eyeglasses).
- Rubbing it roughly with a dry cloth may scratch the
display.
- Drops of water or dirt left on the display may cause
stains.
- If FOMA terminal is wiped with alcohol, paint thinner,
benzine or detergent, the printing may disappear or
color may fade.
・
Clean the jack occasionally with a dry cotton swab
etc.
- If the jack is soiled, connection gets worse and it may
cause power to be turned off or insufficient battery
charge, so clean the jack with a dry cotton swab etc.
Also, be careful never to damage the jack when
cleaning it.
・
Do not place FOMA terminal near an air-conditioner
outlet.
- The rapid change in temperature may cause
condensation, causing internal corrosion and
malfunction.
・
When using, be careful not to subject excessive force
to FOMA terminal or the battery.
- If FOMA terminal is crammed into a brimming bag or
placed in a pocket and sat on, display, internal PCBs or
battery pack may be damaged or malfunction. And, if
external devices are plugged into the external
connection jack (earphone/microphone jack), the
breakage of the connector or malfunction may result.
・
Do not rub or scrape the display with a metal piece
etc.
- It may scratch the display, causing malfunction or
damage.
・
Carefully read the separate instructions that come
with the battery pack and adapter.
FOMA terminal
・
Do not press the surface of the touch panel strongly or
operate it with sharp objects such as a nail, a ballpoint
pen and a pin.
- It may damage the touch panel.
・
Avoid extreme temperature.
- Use FOMA terminal where the temperature ranges
between 5 and 40℃ (limited to the temporary use in a
bathroom etc. when temperature is above 36℃) and
humidity ranges between 45 and 85%.
・
FOMA terminal may affect land-line phones, TVs or
radios in use nearby, so use it as far as possible from
these appliances.
・
Maintain a separate record of the data you saved in
your FOMA terminal.
- If the data is deleted, DOCOMO assumes no
responsibility for the loss of any data.
・
Do not drop FOMA terminal or subject it to shocks.
- May cause malfunction or damage.
・
Do not plug external devices into the external
connection jack (earphone/microphone jack) at a
slant, or do not pull it forcibly while it is plugged.
- May cause malfunction or damage.
16
F-10C_EN_ninshou
・
Do not close FOMA terminal with the strap etc. held
inside.
- May cause malfunction or damage.
・
It is normal for FOMA terminal to become warm
during use or charging. Continue to use it.
・
Do not leave FOMA terminal with the camera in areas
under strong direct sunlight.
- May cause discoloring or burn-in of materials.
・
Use FOMA terminal with the external connection jack
cap closed.
- Dust and/or water brought into FOMA terminal cause
troubles.
・
Do not use FOMA terminal with the back cover
removed.
- May cause removal of battery pack, malfunction or
damage.
・
Do not put extreme thick sticker on the keypad face.
- May cause malfunction, damage or erroneous
operation.
・
Do not put label or sticker on the back side of display.
- Label or sticker may be hooked when opening/closing
FOMA terminal and may cause malfunction or
damage.
・
Do not rotate the display with FOMA terminal closed.
- It may scratch the part around the display and keypad,
and it may cause malfunction or damage.
・
Do not put strong impact on the fingerprint sensor or
scratch its surface.
- It may cause malfunction of fingerprint sensor and
disable authentication operation.
・
Clean the fingerprint se nsor with a dry soft cloth (such
as a cloth for eyeglasses).
- If the fingerprint sensor is dirty or water is sit on its
surface, the sens or cannot read fingerprints, a nd it may
cause decrease authentication performance or
malfunction.
・
While microSD card is being used, do not take the
card out and do not turn off FOMA terminal.
- May cause data loss or malfunction.
・
Do not bring magnetic cards etc. close to FOMA
terminal nor clip it by FOMA terminal.
- Magnetic data in cash cards, credit cards, telephone
cards, floppy disks, etc. may be erased.
・
Do not bring magnetized objects close to FOMA
terminal.
- Bringing strong magnetism close may cause a
malfunction.
Battery pack
・
The battery pack is a consumable part.
- Replace the battery pack if FOMA terminal has
extremely short operation time on a full charge,
though it may vary by operating conditions. Purchase
a new battery pack of the specified type.
・
Charge the battery in an area within the proper
ambient temperature range (5-35
・
The operation time provided by the battery pack
varies by the operating environment and battery
pack's deterioration.
・
The battery pack may swell out a s it comes to near the
end of its lifetime depending on the usage conditions,
but it is not a problem.
・
Be careful especially about the following points when
preserving the battery pack.
- Keeping under the state of the full charge (right after
charging ends)
- Keeping under the state of the empty charge (too
exhausted to turn on FOMA terminal)
They may cause the battery pack performance to be
degraded or its lifetime to be shortened.
A recommended battery level to keep the battery pack
is the battery icon in 2 cells or in 40 % of remaining
battery level as a guide.
℃
).
Introduction
17
F-10C_EN_ninshou
Adapter
・
Charge the battery in an area within the proper
ambient temperature range (5-35
・
Do not charge the battery in the areas below.
- In areas of excessive humidity, dust or vibrations
- Near land-line phones or TVs/radios
・
It is normal for the adapter to become hot while
Introduction
charging. Continue to use it.
・
When using the DC adapter for charging, keep the
vehicle engine running.
- The vehicle's battery could become flat.
・
When using an outlet with a mechanism preventing
unplugging, follow the handling instructions for that
outlet.
・
Do not give strong shock. Do not deform the charging
jack.
- Doing so may cause malfunction.
℃
).
UIM
・
Do not use excessive force to install/remove UIM.
・
Note that DOCOMO assumes no responsibility for
malfunctions occurring as the result of inserting and
using UIM with another IC card reader/writer.
・
Always keep UIM ICs clean.
・
Clean UIM with a soft, dry cloth (such as a cloth for
eyeglasses).
・
Maintain a separate record of the data you saved in
UIM.
- If the data is deleted, DOCOMO assumes no
responsibility for the loss of any data.
・
To preserve the environment, bring the old UIM to a
sales outlet such as docomo Shop.
・
Take care not to scratch, touch accidentally or short
IC.
- May cause data loss or malfunction.
・
Do not drop UIM or subject it to shocks.
- May cause malfunction.
・
Do not bend UIM or place heavy objects on it.
- May cause malfunction.
・
Do not install UIM into FOMA terminal with a label or
sticker put on.
- May cause malfunction.
18
Bluetooth® devices
・
This FOMA terminal is equipped with the security
features, that are compliant with Bluetooth standards
for communication via Bluetooth. However,
depending on the settings, there may not be enough
security. Be aware of security risks when using
Bluetooth.
・
DOCOMO assumes no responsibility for any
information which may be leaked during
communication via Bluetooth.
・
You can use headset, handsfree, audio, keyboard,
dial-up connection, data transfer, serial port, image
transfer or health devices with FOMA terminal. An
audio/video remote control may be available with an
audio device (only Bluetooth compatible devices).
・
Frequency bands
Frequency bands used by FOMA terminal Bluetooth
function are as below.
abdc
2.4FH1
a
2.4 : Radio equipment that uses the 2400 MHz band.
b
FH : The modulation is the FH-SS method.
c
1 : The expected interference distance is 10 m or
shorter.
d
and 2483.5 MHz are used, and the bandwidth used by
mobile object identification devices cannot be
avoided.
: All bandwidths between 2400 MHz
F-10C_EN_ninshou
Cautions on using Bluetooth devices
In the bandwidth used by this terminal, in addition to
home electric appliances such as a microwave oven and
industrial/scientific/medical devices, in-plant radio
stations used to identify mobile objects used in
production lines of a factory that require a license,
specified low power radio stations, or amateur radio
stations that do not require a license (hereafter "other
radio stations") can be in operation.
1. Before using this terminal, check whether other radio
stations are in operation in your neighborhood.
2. If radio wave interference occurs between the
terminal and "other radio stations", use the terminal
in a different location or "Turn the power OFF" to
avoid the radio wave interference.
3. For details, contact "General Inquiries" on the last
page of this manual.
FeliCa reader/writer
・
FeliCa reader/writer function of FOMA terminal uses
weak waves requiring no licenses for radio stations.
・
It uses 13.56 MHz frequency band. When using other
reader/writers in your surroundings, keep FOMA
terminal away sufficiently from them. Before using
the FeliCa reader/writer, confirm that there are no
radio stations using the same frequency band nearby.
FM transmitter
・
FM transmitter of FOMA terminal uses weak waves
requiring no licenses for radio stations.
・
It uses 77.4 - 85.0MHz frequency band. To use it, set
frequency not to common to FM radio station of the
area you use to avoid affecting FM radio users in
neighborhood.
Introduction
19
F-10C_EN_ninshou
CAUTION
・
Do not use a remodeled FOMA terminal. Using a
remodeled terminal violates the Radio Law.
FOMA terminal is certified according to technical
standard conformance of specified wireless
equipment based on the Radio Law, and as a proof of
it, the "Technical Compliance Mark " is depicted on
Introduction
the engraved sticker of FOMA terminal.
If you remodel FOMA terminal by removing its screws,
your certification of technical standard conformance
becomes invalid.
Do not use FOMA terminal with its certification of
technical standard conformance invalid as it violates
the Radio Law.
・
Be careful when you use FOMA terminal while driving
a car etc.
Using a mobile phone while driving is subject to penal
regulations.
However, absolutely necessary cases such as rescue
of a sick person or maintaining public's safety are
exempted.
・
Use the Bluetooth function only in Japan.
The Bluetooth function of the FOMA terminal is
compliant with wireless standards and is authorized
for use only in Japan.
If you use this function overseas, you may be
punished.
・
Use FeliCa reader/writer function only in Japan.
FeliCa reader/writer function of FOMA terminal
conforms to Japanese radio standards.
If you use this function overseas, you may be
punished.
・
Use FM transmitter only in Japan.
FM transmitter of FOMA terminal is compliant with
wireless standards and is authorized for use only in
Japan.
If you use this function overseas, you may be
punished.
20
F-10C_EN_ninshou
Waterproof/Dustproof function
F-10C provides waterproofness of IPX5*1,
*2
and dustproofness of IP5X*3 with
IPX8
firmly closing the external connection jack
cap and installing the back cover in a locked
state.
IPX5 means that a phone keeps functioning after
*1
applying a jet flow of 12.5 L/min. from every
direction from a distance of approximately 3 m for at
least 3 minutes using water nozzle in 6.3 mm inner
diameter.
*2
For F-10C, IPX8 means that a phone keeps
functioning after F-10C is slowly submerged to
depth of 1.5m in static tap water at room
temperature, left there for 30 minutes and then taken
out, and the mobile phone keeps shooting still
images or moving pictures in approximately 30
minutes in static tap water at room temperature.
*3
IP5X means a protection degree that a phone keeps
functioning and safety after it is placed in a device
with dust in diameter 75
agitated and then taken out.
✜
What you can do with waterproofness/
μ
or less for 8 hours,
dustproofness of F-10C
・
You can talk or watch 1Seg programs without
using an umbrella in the rain (for rainfall of 20
mm or less per hour).
- When your hands or the FOMA terminal are
wet, avoid installing/removing the back cover
or opening/closing the external connection
jack cap.
・
You can also shoot still images and moving
pictures in the pool depth of 1.5 m.
- Do not perform other operations underwater
than shooting still images and moving
pictures.
- If you put the terminal in water of swimming
pool, be sure to have it within 30 minutes.
- If FOMA terminal gets wet with water from the
swimming pool, wash it in specified procedure
⇒
(
・
You can use FOMA terminal in a bathroom.
- Do not put the terminal in the bathtub. Do not
use the terminal in hot water. May cause
malfunction.
- Never put FOMA terminal in hot spring water
or water containing soap, detergent or bath
powder.
To ensure waterproofness/
dustproofness
To avoid water/dust ingress, be sure to
observe the following points.
・
Do not throw any liquid other than roomtemperature tap water on FOMA terminal, or
soak it in such liquid.
・
When using the external connection jack, pull
the cap up with your finger by the groove as
shown in the illustration.
Groove
Introduction
P23).
21
F-10C_EN_ninshou
After using the external connection jack, close
the cap as the direction shown in the, and make
sure that the cap is completely closed without
slack by pushing the tab in.
Introduction
・
For installing the back cover, see "Installing back
cover" of "Attaching UIM/battery pack".
・
Securely lock the back cover and firmly close the
external connection jack cap. Even a fine
obstacle (one hair, one grain of sand, tiny fiber,
etc.) put between contact surfaces may allow
water to enter.
・
Do not poke the microphone, earpiece or
speaker with a swab or sharp object.
・
Do not let FOMA terminal fall. It may become
scratched causing the waterproof/dustproof
performance to degrade.
・
The external connection jack cap and the rubber
packing of the rear side of the back cover play an
important role for keeping waterproof
performance. Do not deform the back cover by
twisting etc. or peel off or damage the rubber
packing. Also, prevent dust from adhering to it.
To keep FOMA terminal waterproofness/
dustproofness, replacement of parts is required
every 2 years regardless of whether FOMA
terminal appears normal or abnormal.
DOCOMO replaces the parts as a chargeable
service. Bring FOMA terminal to a sales outlet
such as a DOCOMO-specified repair office.
22
⇒
Tab
Important precautions
Do not perform actions shown in the
illustrations below.
<Example>
Using Soap/Detergent/
Bath powder
P26
Applying strong
water flow
Observe the following precautions to use
FOMA terminal properly.
・
Accessories and optional devices are not
waterproof/dustproof. When watching 1Seg etc.
with FOMA terminal installed in the included
desktop holder, do not use it in a bathroom,
shower room, kitchen or lavatory even if it is not
connected to the AC adapter.
・
Do not apply water flow stronger than allowed (
⇒
P21) (e.g., such water flow that gives you pain
when applied to your skin directly from a faucet
or shower). F-10C provides IPX5 waterproof
performances. However, it causes malfunction.
・
If FOMA terminal gets wet with salt water, sea
water, refreshing beverage or mud or soil
adhered, wash it immediately. If they dry out, it
is hard to remove the dirt and it may cause
damage or malfunction.
・
Do not put FOMA terminal in hot water, use it in
a sauna or apply hot airflow (from a hair dryer
etc.) to it.
Washing with
brush/sponge
Soaking in
ocean water
Machine-washing
Using in
hot spring
F-10C_EN_ninshou
・
Do not move in water or slam the terminal
against the surface of water with FOMA terminal
opened.
・
If you put the terminal in tap water or in water of
swimming pool, be sure to have it within 30
minutes.
・
When you use the terminal in swimming pool,
obey rules of the facility.
・
FOMA terminal does not float on water.
・
Do not leave water on FOMA terminal. May
short-circuit the power jacks, or in a cold region,
water may freeze causing malfunction.
・
Do not leave water on the microphone, earpiece
or speaker. Such water may interfere with
talking.
・
Do not leave water on the temperature/humidity
sensor. Measuring temperature and humidity
may not be correct.
・
If the back cover is damaged, replace it. Water
may enter inside from a damaged section
causing troubles such as electric shocks or
corrosion of the battery.
・
If FOMA terminal gets wet with water or other
liquids with the external connection jack cap or
the back cover open, the liquid may get inside
the terminal causing electric shocks or
malfunction. Stop using FOMA terminal, turn
the power OFF, remove the battery pack and
contact a DOCOMO-specified repair office.
・
If the external connection jack cap, or the rubber
gasket on the rear side of the back cover is
damaged or deformed, replace it at DOCOMOspecified repair office.
DOCOMO does not guarantee actual operations
under all states. Malfunctions deemed to be
caused by inappropriate operation by the
customer are not covered by the warranty.
Washing FOMA terminal
With pressing and holding the external
connection jack cap not to open, wash the
terminal in tap water without rubbing hard.
Press here
・
Do not apply water flow stronger than allowed (
⇒
P21) (e.g., such water flow that gives you pain
when applied to your skin directly from a faucet
or shower).
・
In locked state with the back cover attached,
with pressing and holding the external
connection jack cap not to open, wash the
terminal in tap water in room temperature
without rubbing hard.
・
Do not use brush, sponge, soap, detergent, etc.
・
If mud or soil is adhered to the terminal, do not
open, close or rotate the terminal. Eliminate the
dirt first by shaking several times in tap water of
wash-basin and then wash the terminal with
running water.
・
After washing, wipe the surface with dry cloth
well, drain water by the following procedure and
let the terminal dry naturally.
Introduction
23
F-10C_EN_ninshou
To drain water off the speaker,
shake FOMA terminal with the
speaker upward
Draining water from FOMA
terminal
When FOMA terminal is wet, water may flow
out after wiping it off; drain the water in the
following steps.
a
Hold the hinge section of FOMA terminal firmly
and wipe off moisture on FOMA terminal
Introduction
surface and back side with dry, clean cloth etc.
b
Shake FOMA terminal approximately 20 times,
firmly holding its hinge section, until there is
no more water splattering.
24
F-10C_EN_ninshou
c
Swing FOMA terminal in about 10 times
against dry, clean cloth etc. to wipe off water
remaining in the microphone, earpiece,
speaker, keypad, hinges or charging jack, etc.
In addition, swing the right side of the display
face against cloth about 10 times to wipe off
the water remaining in earpiece (right in the
illustration below).
Charging
Check the following before and after
charging.
・
Check if FOMA terminal is not wet. Never try to
charge the battery pack when FOMA terminal is
wet.
・
Accessories and optional devices are not
waterproof/dustproof.
・
When charging the battery when or after FOMA
terminal is wet, adequately drain it and wipe off
water with a dry, clean cloth etc., before
connecting the accessory desktop holder or
opening the external connection jack cap.
・
When the external connection jack cap is
opened for charging, close the cap firmly after
charging. It is recommended to use the desktop
holder for charging to prevent water from
seeping inside from the external connection
jack.
・
Do not use the AC adapter or desktop holder in
a bathroom, shower room, kitchen, lavatory or
other highly humid area. May cause fire or
electric shock.
・
Do not touch the AC adapter or desktop holder
with wet hands. May cause electric shock.
Introduction
d
Wipe off water drained from FOMA terminal
with dry, clean cloth etc., and dry naturally.
･
Water, if any, remaining in FOMA terminal
may ooze up after wiping off.
･
Do not wipe off water remaining in gaps
directly with a cotton swab etc.
25
Loading...