Fujitsu ESPRIMO P4 Series, ESPRIMO PH3 Series, ESPRIMO P5 Series Operating Manual
System
Operating Manual
ESPRIMO P4xx / P5xx / PH3xx
Congratulations, you have
decided to buy an
innovative Fujitsu product.
The latest information about our products, useful tips, updates etc. is available
on our website:"
http://ts.fujitsu.com"
For automatic driver updates, go to: "http:// support.ts.fujitsu.com/com/support/index.html"
Should you have any technical questions, please contact:
• our Hotline/Service Desk
(see the Service Desk list or visit: "
http://ts.fujitsu.com/support/servicedesk.html")
• Your sales partner
• Your sales office
We hope you really enjoy using your new Fujitsu system.
Copyright
Fujitsu Tec
hnology Solutions 08/11
Published by
Fujitsu Technology Solutions GmbH
Mies-van-
der-Rohe-Straße 8
80807 Munich, Germany
Contact
h
ttp://t
s.fujitsu.com/support
All rights reserved, including intellectual property rights. Technical data subject to modifications and delivery subject to
availability. Any liability that the data an d illustrations are complet e, actual or correct is exclud ed. Designations may be
tradem
arks and/or copyrights of the respective manufacturer, the use of which by third parties for their own purposes may
infringe the rights of such owner. You will find more information at "
http://ts.fujitsu.com/terms_of_use.html"
Order N
o. Fujitsu Technology Solutions GmbH: A26361-K1017-Z320-1-7619, edition 2
ESPRIMO P4xx / P5xx / PH3xx
Operating Manual
Your ESPRIMO 5
Important notes 7
Getting started 10
Operation 18
Troubleshooting and tips 24
System expansions 29
Technical specification 44
Index 45
ESPRIMO is a registered trademark of Fujitsu Technology Solutions GmbH.
Windows 7, Windows Vista and Windows XP are registered trademarks of Microsoft Corporation.
PS/2 is a registered trademark of International Business Machines, Inc.
Pentium is a registered trademark of Intel Corporation, USA.
Kensington and MicroSaver are registered trademarks of ACCO World Corporation.
All other trademarks referenced are trademarks or registered trademarks of their
respective owners, whose protected rights are acknowledged.
Copyright © Fujitsu Technology Solutions GmbH 2011
All rights reserved, including rights of translation, reproduction by printing, copying
or similar methods, either in part or in whole.
Noncompliance is subject to compensation for damages.
All rights reserved, including rights created by patent grant or registration of a utility model or design.
Subject to availability and tech nical modifications.
Contents
Contents
YourESPRIMO ......................................................................... 5
Notational conventions .................................................................. 6
Important notes ........................................................................ 7
Safetyinformation ....................................................................... 7
Transporting the device
..................................................................
7
Cleaning the device ..................................................................... 8
Energy saving, disposa
land recycling ....................................................
8
CEmarking ............................................................................ 8
FCC Compliance Stat em
ent .............................................................
9
FCC Class B Compliance
Statement ..................................................
9
Getting started ......................................................................... 10
Unpacking and checking the delivery . . ................................................... 10
Stepsfor initialsetup .................................................................... 10
Setting up thedevice .................................................................... 11
Connecting the device to the mains supply . . . . ............................................ 11
Connecting external devices . . ........................................................... 12
Connecting the cables . .............................................................. 12
Disconnecting the cables . . . . . ....................................................... 12
Portson thedevice .................................................................. 13
Connecting a monitor . . . . . ........................................................... 14
Connecting the mouse . . . . ........................................................... 14
Connecting the keyboard . ........................................................... 15
Connecting extern al devices to the serial interface . .................................... 15
Connecting extern al devices to the USB ports . ........................................ 16
Switchingonforthefi rsttime: installing the software ....................................... 16
Switchingon monitor and device ..................................................... 17
Installingthe software ............................................................... 17
Operation .............................................................................. 18
Switch the
deviceon ....................................................................
18
Switching
off thedevice .................................................................
18
Indicato
rson thedevice .................................................................
19
Keyboard
...............................................................................
20
Importan
t keys and keyboard shortcuts . . . . ............................................
21
Setting
sin BIOSSetup ..................................................................
22
Propert
yand dataprotection .............................................................
22
Anti-th
eft protection and lead-sealing . . . . . . ............................................
22
BIOS s e
tupsecurity functions ........................................................
23
Access
authorisation via SmartCard ..................................................
23
Troubleshooting andtips .............................................................. 24
Helpif problems occur ................................................................... 24
Troubleshooting . . . ...................................................................... 24
Powerindicator remains off afteryou haveswitched on your device ..................... 24
The d evice cannot be switched off with the ON/OFF switch ............................. 25
Monitorremains blank ............................................................... 25
Nomouse pointer displayedon the screen ............................................ 27
Time and/ordate isnot correct ....................................................... 27
Errormessages on the screen ........................................................ 27
Installingnew software .................................................................. 27
Fujitsu Technology Solutions 3
Contents
Restoring hard disk contents ............................................................. 28
Tips .................................................................................... 28
Systemexpansions .................................................................... 29
Information about boards ................................................................ 30
Opening the casing . . ................................................................... 31
Closingthe casing ...................................................................... 32
Overview of thedrive bays and drives in yourdevice ....................................... 32
Installing and removing the accessible 5
1
/4inchdrive ...................................... 33
Removing anaccessibledrive ........................................................ 33
Installingan accessible drive ......................................................... 34
Installing and removing an accessible 3
1
/2inchdrive ....................................... 35
Installingan accessible drive ......................................................... 35
Removing anaccessibledrive ........................................................ 36
Installingand removing the hard disk drive ................................................ 37
Removing a hard diskdrive .......................................................... 37
Installinga harddisk drive ........................................................... 38
Installing and removing a board . . ........................................................ 39
Boardinstalling ..................................................................... 39
Boardremoving ..................................................................... 41
Mainboard expansions . . ................................................................ 42
Upgrading mainmemory ............................................................. 42
Processor, replacing ................................................................. 42
Replacing the lithium battery ......................................................... 43
Technical specification ................................................................. 44
Index .................................................................................. 45
4 Fujitsu Technology Solutions
Your ESPRIMO
Your ESPRIMO
Overview
... is available with various configuration levels which differ in terms of hardware and software
equipment. You can install additional drives (for exa m ple a DVD drive) and other boards.
This ma nual tells you how to start using your device and how to operate it in daily use.
This manual applies for all configuration levels. Depending on the chosen configuration
level, some of the hardware components described may not be available on your PC.
Please also read the notes about your operating system.
Depending on the configuration selected, the operating system is preinstalled
on your hard disk (e.g. Window s 7).
Further information on this device is provided:
• in the poster "Getting Started"
• in the "Safety/regul
ations" manual
• in the "Warranty" manual
• in the operating m a
nual for the monitor
• in the manual for the mainboard
• in your operating
system d ocumentation
• in the information files (e.g. *.PDF, *.HT ML, *.DOC, *.CHM, *.TXT, *.H LP )
Some of the manuals listed can be found in electronic form on the "Drivers & Utilities" DVD.
You can access and view the required information using the Acrobat Reader
program, w hich is also included on the DVD. You can of course also
print out a copy of the manual if you prefer.
Fujitsu Technology Solutions 5
Your ESPRIMO
Notational conventions
Pay particular a tten tion to text marked with this symbol. Failure to observe
these warnings could p ose a risk to health, damage the device or lead
to loss of data. The warranty will be invalidated if the device becomes
defective through failure to observe these warnings.
Indicates important informa
tion for the proper use of the device.
►
Indicates an activity that must be performed
Indicates a result
This font
Indicates data entered
using the keyboard in a program dialogue or at
the command line, e .g.
your password (Name123) or a command used to
start a program (star
t.exe)
This font
Indicates informa tion that is displayed on the screen by a program,
e.g.: Installation is complete.
This font
Indicates
• terms and texts used in a software interface, e.g.: Click on Save
• names of programs or files, e.g. Windows or setup.exe.
"This font"
Indicates
• cross-references to anot her section, e.g. "Safety information"
• cross-references to an external source, e.g. a web address: For more
information, go to "
http://ts.fujitsu.com"
• Names of CDs, DVDs and titles or designations for other materials,
e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual
Key
Indicates a key on the keyboard, e.g:
F10
This font
Indicates terms and texts that are emphasised or highlighted, e.g.: Do
not switch off the device
6 Fujitsu Technology Solutions
Important notes
Important notes
ImportantnotesNotes
In this chapter you will find information regarding safety which it is essential to
take note of when working with your device.
Safety information
SafetyinformationNote
Please note the informat
ion provided in the "Safety/regulations" manual
and in the following safe
ty notes.
When installing and ope
rating the device, please observe th e no tes on
environmental conditi
ons in Chapter "
Technical specification", Page 4 4 as well
as the i nstructions in C
hapter "
Getting started", Page 10.
When setting up the dev
ice, make sure there is clearance all around it so that
thecasingreceives
enough ventilation. In order to avoid overheating, do not
cover the ventilati
on areas of the monitor or the device.
You must only opera
te the device if the rated voltage used by the
device is set to the
local mains voltage.
The main switch (if
present) and the ON/OFF switch do not disconnect the
device from the ma
ins voltage. To completely disconnect from the mains
voltage, remove t
he power plug from the power socket.
Replace the lit
hium battery on the mainboard in accordance with the instructions
in "
Replacing t
he lithi um battery", Page 43.
Caution, compo
nents in the system can get very hot.
The activitie
s described in these instructions must always be
performed wit
h the greatest care.
Repairs to th
e device must only be performed by qualified technicians.
Incorrect re
pairs could put the user at great risk or cause serious damage
to the equip
ment (electric shock, risk of fire).
Transport
ing the device
Device,Trans portationRetransportation
Transport all parts separately in their original packaging or in a packaging which
protects them from knocks and jolts, to the new site.
Do not unpack them until all transportation manoeuvres are completed.
If the device is brought from a cold environment into the room whe re it will be used,
condensation may occur. Before operating the device, wait until it is absolutely dry
and has reached approximately the same tempe rature as the installation site.
Fujitsu Technology Solutions 7
Important notes
Cleaning the device
Device,Trans portationRetransportationSystem unit,seeDevice
Turn off all power and equipment switches and disconnect the power
plug from the mains outlet.
Do not clean any interior parts yourse lf, leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrode
plastic (alcohol, thinner or acetone).
Never clean the device with water! Water entering into th e device could
present a serious risk to users (e.g. electric shock).
Ensure that no liquid enters the system.
The surface can be clea
ned with a dry c loth. If particularly dirty, use a cloth that has been
moistened in mild dome
stic detergent and then carefully wrung out.
Use disinfectant wi
pes to clean the keyboard and the mouse.
Energy saving, disposal and recycling
DisposalEnergysavingRecy clingDrivers&UtilitiesDVDUserDocumentationDVD
Further information can be found on the "Drivers & Utilities" DVD.
CE marking
CEmarkingCEmarkingNotesElectromagne
ticcompatibility
Lowvoltagedi
rective
The shipped version of this device complies with the requirements of EEC
directives 2004/108/EC "Electromagnetic compatibility" and 2006/95/EC
"Low voltage directive".
CE marking for devices w ith radio component
This equipment complies with the requirements of Directive 1999/5/EC of t he
European Parliament and Commission from 9 March, 1999 governing Radio
and Telecommunications Equipment and mutual recognition of conformity.
This equipment can be used in the following countries:
Belgium Bulgaria Denmark
Germany
Estonia Finland France
Greece
UK Ireland Iceland Italy
Latvia Liechtenstein Lithuania Luxembourg
Malta Netherlands Norway Austria
Poland Portugal Rumania
Sweden
Swit
zerland
Slov
akia
Slov
enia
Spai
n
Czech Republic
Hun
gary
Cyprus
Contact the corresponding government office in the respective country for
current information on possible operating restrictions. If your country is
not included in the list, then please contact the corresponding supervisory
authority as to whether the use of this product is permitted in your country.
8 Fujitsu Technology Solutions
Important notes
FCC Compliance Statement
If the device complies with the FCC regulations, the FCC sign can be found on the type rating plate.
FCCClassBComplianceState
ment
The following statement applies to the products covered in this manual, unless otherwise specified
herein. The statem ent for other pro ducts will appear in the accompanying documentation.
NOTE:
This equipment has been tested and found to comply with the limits for a "Class B" digital
device, pursuant to Part 15 of the FCC rules and meets all requirements of the Canadian
Interference-Causing Equipment Standard ICES-003 for digital a ppara tus. These limits are
designed to provide reasonable protect ion against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio fre quency energy and, if not installed
and used in strict accordance with the instructions, may cause harm ful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the sep
aration between equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the de
aler or an experienced radio/TV technician for help.
Fujitsu Technology Solutions GmbH is not responsible for any radio or television interference
caused by unauthorized modifications of this equipment or the substitution or attachment
of connecting cables and equipment other than those specified by Fujitsu Technology
Solutions GmbH. The correction of interferences caused by such unauthorized modification,
substitution or attachment w ill be the responsibility of the user.
The use of shielded I/O cables is required when connecting this equipment to any and all optional
peripheral or host devices. Failure to do so may violate FCC and ICES rules.
Fujitsu Technology Solutions 9
Getting started
Getting started
Gettingstarted
Please observe the safety information in the "Important notes", Page 7 chapter.
Unpacking and checking the delivery
It is recommended not to throw away the original pa ckaging material! It may be
required for reshipment at some later date.
PackagingContentsofdeliveryPackaging,
► Unpack all the individual parts.
► Check the contents of the package for any visible damage ca used during transport.
► Check whether the delivery conforms to the details in the delivery note.
► Should you discover that the delivery does not correspond to the delivery
note, notify your local sales outlet immediately.
Steps for initial setup
Preparingforfirstuse, overviewPreparingforuse,
Only a few step s are necessary to put your new device into operation for the first time:
• Select a location for device and set up device
• Connecting external devices
• Check the voltage at the m ains outlet and connect the device to an electrical outlet
• Switch the device on
You will learn more about the individual steps in the following sections.
External devices
If you have received other external devices in addition to your own device
(e.g. a printer), do not connect these until after the initial installation. The following
sections describe how to connect these external devices.
Drives and boards
If you have received drives or boards with your device, please do not install
them until after first-time setup. How to install drives and boards is described
in the "
System expansions", Page 29 chapter.
10 Fujitsu Technology Solutions
Getting started
Settingupthedevice
WorkstationErgonomicDevi ce
When installing your device, please read the recommendations and safety
notes in the "Safety/regulations" manual.
We recommend that you place your device on a surface which is not slippery. In
view of the many different finishes and varnishes use d on furniture, it is possible
that the rubber feet will mark the surface they stand o n.
Depending on the location of your device, troublesome vibrations and noises
may occur. To prevent this, a distance of at least 10 mm should be maintained
from other devices on casing sides without ventilation surfaces.
In order to avoid overheating, do not cover the ventilation areas
of the monitor or the device.
A m inimu m distance of 200 mm from the device must be observed for ventilation areas.
Do not stack several devices on top of each other.
Do not expose the device to extreme ambient conditions (see "
Technical
specification", Page 44, section "Ambient conditions"). Protect the
device against dust, humidity and heat.
Operating positi
on
Use the device on
ly in the vertical operating position.
Connecting the device to the mains supply
Mainsadapter
2
1
► Conne
ct the power cable to the device (1).
► Plug the power plug into a grounded mains outlet (2).
Fujitsu Technology Solutions 11
Getting started
Connecting external devices
Read the documentation on the external device before connecting it.
With the exception of USB de vices, always remove all power plugs
before connecting external devices!
Do not connect or disconnect c ables during a th understorm.
Always take hold of the actual plug. Never unplug a cable by pulling the cable itself.
Connect a nd disconnect the cables in the order described below.
Connecting the cables
► Turn off all power and equipment switches.
CordCable,
► Remove all power plugs from the grounded mains outlets.
► Connect all the cables to the device and the external devices. Please make sure that you
always observe the safety notes provided in "
Important notes", Page 7.
► Plug all data communication cables into the appropriate sockets.
► Plug all power cables into the grounded mains outlets.
USB devices are hot-pluggable. This means you can connect and disconnect
USB cables while your device is switched on.
Additional information can be found in "
Connecting external devices to the USB
ports", Page 16 and in the documentation for the USB devices.
Disconnecting the cables
► Switch off al
l affected devices.
Cable,
► Remove all power plugs from the grounded mains outlets.
► Unplug all d
ata communication cables from th e appropriate sockets.
► Disconnect all of the cables from the device and from the external devices.
12 Fujitsu Technology Solutions
Loading...