Fujitsu ESPRIMO P410, ESPRIMO P420, ESPRIMO P520, ESPRIMO PH300, ESPRIMO PH310 Operating Manual

...

System

Operating Manual

ESPRIMO P4xx / P5xx / PH3xx

Thank you for buying an inno

vative product from Fujitsu.

Latest information abo

ut our products, useful tips, updates etc. is available

on our website: "

http:

//www.fujitsu.com/fts/"

You can ﬁnd driver upda

tes at: "

http://support.ts.fujitsu.com/download"

Should you have any te

chnical questions, please contact:

• our Hotline/Service

Desk (see Service Desk list or from the Internet at:

http://support.t

s.fujitsu.com/contact/servicedesk")

• Your sales partner

• Your sales ofﬁce We hope you enjoy using your new Fujitsu system!

Published by / Contact address in the EU

Fujitsu Te

chnology Solutions GmbH

Mies-van-der-Rohe-Straße 8

80807 Munich, Germany

http://

www.fujitsu.com/fts/"

©Fujits

Publication Date

03/2013

Order No.: A26361-K1017-Z320-1-7619, edition 3

ESPRIMO P4xx / P5xx / PH3xx

Operating Manual

Your ESPR IMO 5 Important notes 7 Getting started 11 Operation 19 Troubleshooting and tips 25 System expansions 29 Technical speciﬁcation 44 Index 45

Remarks

Information on the product description meets the design speciﬁcations of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notiﬁcation. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions.

Trademarks

Fujitsu, the Fujitsu logo and ESPRIMO are registered trademarks of Fujitsu Limited or its subsidiaries in the United States of America and other countries.

Kensington, MicroSaver and K-Slot are registered trademarks of ACCO Brands.

Microsoft and Windows are trademarks or registered trademarks of the Microsoft Corporation in the United Sta tes and/or other countries.

All other trademarks speciﬁed here are the property of their respective owners.

No part of this publication may be copied, reproduced or translated without the prior written consent of Fujitsu.

No part of this publication may be saved or transferred by any electronic means without the written approval of Fujitsu.

Contents

YourESPRIMO ......................................................................... 5

Validityof the ReferenceManual ......................................................... 5

Notational conventions .................................................................. 6

Importantnotes ........................................................................ 7

Safetyinformation ....................................................................... 7

Transporting the device

..................................................................

Cleaning the device ..................................................................... 8

Energy saving, disposa

landrecycling ....................................................

CEmarking ............................................................................ 9

FCC Compliance Statem

ent .............................................................

FCC Class B Compliance

Statement ..................................................

FCC Radiation Exposu

re Statement ..................................................

Gettingstarted ......................................................................... 11

Unpacking and checking the delivery . . ................................................... 11

Stepsfor initial setup .................................................................... 11

Setting up the device .................................................................... 12

Connecting the device to the mains supply . . . . ............................................ 12

Connecting externa l devices . . ........................................................... 13

Connecting the cables . .............................................................. 13

Disconnecting the cables . . . . . ....................................................... 13

Portson the device .................................................................. 14

Connecting a monitor . . . . . ........................................................... 15

Connecting the mouse . . . . ........................................................... 15

Connecting the keyboard . ........................................................... 16

Connecting external devices to the serial interface . .................................... 16

Connecting external devices to the USB ports . ........................................ 17

Switchingonfortheﬁrst time: installing the software ....................................... 17

Switchingon monitor anddevice ..................................................... 18

Installingthe software ............................................................... 18

Operation

..............................................................................

Switch th

edevice on ....................................................................

Switchin

goff the device .................................................................

Indicato

rson the device .................................................................

Keyboar

d ...............................................................................

Importa

nt keys and keyboard shortcuts . . . . ............................................

Setting

sinBIOS Setup ..................................................................

Proper

tyand data protection .............................................................

Anti-t

heft protection and lead-sealing . . . . . . ............................................

BIOS s

etupsecurity functions ........................................................

Acces

sauthorisation via SmartCard ..................................................

Troubleshooting andtips .............................................................. 25

Helpif problems occur ................................................................... 25

Troubleshooting . . . ...................................................................... 25

Powerindicator remains off after you haveswitched on yourdevice ..................... 25

The device cannot be switched off with the O N/O FF switch ............................. 26

Monitorremains blank ............................................................... 26

Nomouse pointer displayed on the screen ............................................ 27

Time and/or date is not correct ....................................................... 27

Fujitsu 3

Contents

Errormessages on the screen ........................................................ 27

Installingnew software .................................................................. 28

Restoring hard disk contents ............................................................. 28

Tips .................................................................................... 28

Systemexpansions .................................................................... 29

Information about boards ................................................................ 30

Opening the casing . . ................................................................... 31

Closingthe casing ...................................................................... 32

Overview of the drivebays and drivesin your device ....................................... 32

Installing and removing the accessible 5

/4inchdrive ...................................... 33

Removing an accessibledrive ........................................................ 33

Installingan accessible drive ......................................................... 33

Installing and removing an accessible 3

/2inchdrive ....................................... 35

Installingan accessible drive ......................................................... 35

Removing an accessibledrive ........................................................ 36

Installingand removing thehard disk drive ................................................ 37

Removing a hard diskdrive .......................................................... 37

Installinga hard disk drive ........................................................... 38

Installing and removing a board . . ........................................................ 39

Boardinstalling ..................................................................... 39

Boardremoving ..................................................................... 41

Mainboard expansions . . ................................................................ 42

Upgrading main memory ............................................................. 42

Processor, replacing ................................................................. 42

Replacing the lithium battery ......................................................... 43

Technical speciﬁcation ................................................................. 44

Index .................................................................................. 45

4 Fujitsu

Your ESPRIMO

Overview

... is available with various conﬁguration levels which differ in terms of hardware and software equipment. You can install additional drives (for exam ple a DVD drive) and other boards.

This manual tells you how to start using your device and how to operate it in daily use. This manual applies for all c onﬁguration levels. Depending on the cho sen conﬁguration level, some of the hardware components described may not be ava ilable on your PC. Please also read the notes about your operating system.

Depending on the conﬁguration selected, the operating system is preinstalled on your hard disk (e.g. Windows).

Further information on this device is provided:

• in the "Quick Start Guide" poster

• in the "Safety/regul

ations" manual

• in the "Warranty" manual

• in the op erating ma

nual for the monitor

• in the manual for the mainboard

• in your operating

system documentation

• in the information ﬁles (e.g. *.PDF, *.H TML, *.DOC, *.CHM , *.TXT, *.HLP )

Some of the manuals listed can be found in electronic form on the "Drivers & Utilities" DVD.

You can access and view the required information using the Acrobat Reader

program, which is also included on the DVD. You can of course also print out a copy of the manual if you prefer.

ValidityoftheReferenceManual

This Reference Manual is valid for the following systems:

• ESPRIMO P400

• ESPRIMO P410

• ESPRIMO P420

• ESPRIMO P520

• ESPRIMO PH300

• ESPRIMO PH310

Fujitsu 5

Your ESPRIMO

Notational conventions

Pay particular attention to text marked with this symbol. Failure to observe these warnings could pose a risk to health, damage the device or lead to loss of data. The warranty will be invalidated if the device becomes defective through failure to observe these warnings.

Indicates important informa

tion for the proper use of the device .

►

Indicates an activity t hat must be performed



Indicates a result

This font

indicates data e ntered

using the keyboard in a program dialogue or at

the command line, e.g.

your password (Name123) or a command used to

start a program (star

t.exe)

This font

indicates information that is displayed on the screen by a program, e.g.:

Installation is complete.

This font

indicates

• terms and texts used in a software interface, e.g.: Click on Save

• names of programs or ﬁles, e.g. Windows or setup.exe.

"This font"

indicates

• cross-references to another section, e.g. "Safety information"

• cross-references to an external source, e.g. a web address: For more information, go to "

http://www.fujitsu.com/fts"

• Names of CD s, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual

Key

indicates a key on the keyboard, e.g:

F10

This font

indicates terms a nd texts that are emphasised or highlighted, e.g.: Do not switch off th e device

6 Fujitsu

Important notes

ImportantnotesNotes

In this chapter you will ﬁnd information regarding safety which it is essential to take note of when working with your device.

Safety information

SafetyinformationNote

Please note the informat

ion provided in the "Safety/regulations" manual

and in the following safe

ty notes.

When installing and ope

rating the device, please observe the notes on

environmental conditi

ons in Chapter "

Technical speciﬁcation" , Page 44 as well

as the instructions in C

hapter "

Getting started", Page 11.

When setting up the dev

ice, make sure there is clearance all around it so that

thecasingreceives

enough ventilation. In order to avoid overheating, do not

cover the ventilati

on areas of the monitor or the device.

You must only opera

te the device if the rated voltage used by the

device is set to the

local mains voltage.

The main switch (if

present) and the ON/O FF switch do not disconnect the

device from the ma

ins voltage. To completely disconnect from the mains

voltage, remove t

he power plug from the power socket.

Only operate th

e device with the casing closed.

Replace the lit

hium battery on the mainboard in accordance with the instructions

in "

Replacing t

he lithium battery", Page 43.

Caution, comp

onents in the system can get very hot.

The activiti

es described in these instructions must always be

performed wi

th the greatest care.

Repairs to th

e device must only be performed by qualiﬁed technicians.

Incorrect r

epairs could put the user at great risk or cause serious damage

to the equ i

pment (electric shock, risk of ﬁre).

Transpor

ting the device

Device,Trans po

rtation

Retrans

portation

Transport all parts separately in their original packaging or in a packaging which protects them from knocks and jolts, to the new site.

Do not unpack them until all transportation manoeuvres are completed.

If the device is broug ht from a cold environment into the room where it will be used, condensation may occur. Before operating the device, wait until it is absolutely dry and has reached approximately the same temperature as the installation site.

Fujitsu 7

Important notes

Cleaning the device

Device,Transpo rtationRetransportationSystemunit,seeDevi ce

Turn off all power and equipment switches and disconnect the power plug from the mains outlet.

Do not clean any interior parts yourse lf, leave this job to a service technician.

Do not use any cleaning agents that contain abrasives or may corrode plastic (alcohol, thinner or acetone).

Never clean the device with water! Water entering into th e device could present a serious risk to users (e.g. electric shock).

Ensure that no liquid enters the system .

The surface can be clea

ned with a dry cloth. If particularly dirty, use a cloth that has been

moistened in mild dome

stic detergent and then carefully wrung out.

Use disinfectant wi

pes to clean the keyboard and the mouse.

Energy saving, disposal and recycling

DisposalEnergysavingRecyclingDrivers&UtilitiesDVDUserDocumentationDVD

You c a n ﬁnd information on these subjects on the "Drivers & Utilities" DVD or on our website ("

http://www.fujitsu.com/fts/about/fts/environment-care/").

8 Fujitsu

Important notes

CE marking

CEmarkingCEmarkingNotesElectromagneticcompatibilityLowvoltagedirective

The shipped version of this device complies with the requirements of European Union directives 2004/108/EC "Electromagnetic compatibility", 2006/95/EC "Low voltage directive" and 2009/125/EC "Ecodesign".

CE marking for devices with radio component

This equipment complies with the requirements of Directive 1999/5/EC of the European Parliament and Commission from 9 March, 1999 governing Radio and Telecommunications Equipment and mutual recognition of conformity.

The CE marking valid for your device can b e found on the device label.

Explanation: CE nnnn (!); nnnn deﬁnes the type of CE marking and the exclamation mark indicates a device with radio components.

You c a n ﬁnd more information and declarations of c onfo rmity on the Internet at:

http://globalsp. ts.fujitsu.com/sites/certiﬁcates".

This equipment can be used in the following countries:

Belgium Bulgaria Denmark

Germany

Estonia Finland France

Greece

UK Ireland Iceland Italy

Croatia

Latvia Liechtenstein Lithuania

Luxembourg Malta Netherlands Norway

Austria Poland Portugal Ruma nia

Sweden Switzerland Slovakia Slovenia

Spain Czech Republic

Hungary

Cyprus

Contact the corresponding government ofﬁce in the respective country for current information on possible operating restrictions. If your country is not included in the list, then please contact the corresponding supervisory authority as to whether the use of this product is permitted in your country.

Fujitsu 9

Important notes

FCC Compliance Statement

If the device complies with the FCC regulations, the F CC sign can be found on the type rating plate.

FCC Class B Compliance S tate

ment

DOC (INDUSTRY CANADA) NOTICES Notice to Users of Radios and Television :

This class B digital apparatus complies with Canadian ICES-003.

The following state ment applies to the products covered in this manual, unless otherwise speciﬁed herein. The statement for other products will appear in the accompanying documentation.

NOTE:

This equipment has been tested and found to comply with the limits for a "Class B" digital device, pursuant to Part 15 of the FCC rules and meets all requirements of the Canadian Interference-Causing Equipment Standard ICES-003 for digital apparatus. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in strict accordance with the instructions, m ay cause harmful interference to ra dio communications. However, there is no guarantee that interference will n ot occur in a particular installation. If this equipment does cause harmful interference to radio or television rece ption, which ca n be determined by turning the equipmen t off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the s

eparation between equipment and the rece iver.

• Connect the equipment into an outlet on a circuit different from th at to which the receiver is connected.

• Consult the d

ealer or an experienced radio/TV technician for help.

Fujitsu not responsible for any radio or television interference caused by unauthorized modiﬁcations of this equipment or the substitution or attachment of connecting cables and equipment other than those speciﬁed by Fujitsu. The correction of interferences caused by such unauthorized modiﬁcation, substitution or attachment will be the responsibility of the user.

The use of shielded I/O cables is required when connecting this equipment to any and all optional peripheral or host devices. Failure to do so may violate FCC and ICES rules.

FCC Radiation Exposure Statement

This equipment complie s with FCC radiation exposure limits set forth for an uncontrolled environment.

The transmitters in this device must not be co-located or op erated in conjunction with any other antenna or transmitter.

To prevent radio interference to t he licensed service, this device is intended to be operated indoors and aw ay from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.

Users are not authorized to modify this product. Any modiﬁcations invalidate the w arranty.

This equipment may not be modiﬁed, altered, or chan ged in any way without signed written permission from Fujitsu. Unauthorized modiﬁcation will void the equipment authorization from the FCC and Industry Canada and the warranty.

10 Fujitsu

Getting started

Gettingstarted

Please observe the safety information in the "Important notes", Page 7 chapter.

Unpacking and checking the delivery

It is recommended not to throw away the original packaging material! It may be required for reshipment at some later date.

PackagingContentso fdeliveryPackaging,

► Unpack all the individual parts. ► Check the contents of the package for any visible damage caused during transport. ► Check whether the delivery conforms to the details in the delivery note. ► Should you discover that the delivery does not correspond to the delivery

note, notify your local sales outlet immediately.

Steps for initial setup

Preparingforﬁrstuse, overviewPreparingforuse,

Only a few steps are necessary to put you r new device into operation for the ﬁrst time:

• Select a location for device and set up device

• Connect external devices such as mouse, keyboard and monitor

• Check the voltage at the mains outlet and connect the device to an elect rical outlet

• Switch the device on You will learn more about the individual steps in the following sections.

External devices

If you have received other external devices in ad dition to your own device (e.g. a printer), do not connect these until after the initial installation. The following sections describe how to connect these external devices.

Drives and boards

If you have received drives or boards with your device, please do not install them until after ﬁrst-time setup. How to install drives and boards is described in the "

System expansions", Page 29 chapter.

Fujitsu 11

Getting started

Setting up the device

WorkstationErgonomicDevi ce

When installing your device, please read the recommendations and safety notes in the "Safety/regulations" manual.

We recommend that you place your device on a surface which is not slippery. In view of the man y different ﬁnishes and varnishes used on furniture, it is possible that the rubber feet will mark the surface they stand on.

Depending on the location of your device, bothersome vibrations and noises may occur. To prevent this, a distance of at least 10 mm / 0.39 inch should be maintained from other devices on casing sides w ithout ventilation surfaces.

In order to avoid overheating, do not cover the ventilation areas of the monitor or the device.

A minimum distance of 200 mm / 7.87 inch from the device must be observed for ventilation areas.

Do not stack several devices on top of each other.

Do not expose the device to extreme ambient conditions (see "

Technical speciﬁcation", Page 44, section "Ambient conditions"). Protect the

device against dust, humidity and heat.

Operating positi

Use the device on

ly in the vertical operating position.

Connecting the device to the mains supply

Mainsadapter

► Conn

ect the power cable to the device (1).

► Plug the power plug into a grounded mains outlet (2).

12 Fujitsu

+ 35 hidden pages

Fujitsu ESPRIMO P410, ESPRIMO P420, ESPRIMO P520, ESPRIMO PH300, ESPRIMO PH310 Operating Manual

Specifications and Main Features

Frequently Asked Questions

User Manual