System
Operating Manual
ESPRIMO P7XX / P9XX
Thank you for buying an inno
vative product from Fujitsu.
Latest information abo
ut our products, useful tips, updates etc. is available
on our website: "
http:
//www.fujitsu.com/fts/"
You can receive automa
tic driver updates from: "
http://support.ts.fujitsu.com/ download"
Should you have any te
chnical questions, please contact:
• our Hotline/Service
Desk (see Service Desk list or from the Internet at:
"
http://support.t
s.fujitsu.com/contact/servicedesk")
• Your sales partner
• Your sales office
We hope you enjoy using your new Fujitsu system!
Published by / Contact address in the EU
Fujitsu Te
chnology Solutions GmbH
Mies-van-der-Rohe-Straße 8
80807 Munich, Germany
h
ttp://w
ww.fujitsu.com/fts/
Copyright
©Fujits
u Technology Solutions GmbH 2013. All rights reserved.
Publication Date
07/2013
Order No.: A26361-K1015-Z320-2-7619, edition 2
ESPRIMO P7XX / P9XX
Operating Manual
Your ESPRIMO 5
Ports and operating elements 7
Important notes 10
Getting started 13
Operation 22
Troubleshooting and tips 30
System expansions 35
Technical data 58
Index 59
Remarks
Information on the product description meets the design specifications of Fujitsu and
is provided for comparison purposes. Several factors may cause the actual results to
differ. Technical data is subject to c hange without prior notification. Fujitsu rejects any
responsibility with regard to technical or editorial mistakes or omissions.
Trademarks
Fujitsu, the Fujitsu logo and ESPRIMO are registered trademarks of Fujitsu Limited or its
subsidiaries in the United States of America and other countries.
Kensington and MicroSaver are registered trademarks of ACCO World Corporation.
Microsoft and Windows are trademarks or registered trademarks of the Microsoft
Corporation in the United Sta tes and/or other countries.
All other trademarks specified here are the property of their respective owners.
Copyright
No part of this publication may be copied, reproduced or translated without
the prior written consent of Fujitsu.
No part of this publication may be saved or transferred by any electronic means
without the written approval of Fujitsu.
Contents
Contents
YourESPRIMO ......................................................................... 5
Validityof theReferenceManual ......................................................... 6
Notational conventions .................................................................. 6
Ports and operating elemen
ts .........................................................
7
Front ................................................................................... 7
Rear ................................................................................... 8
Importantnotes ........................................................................ 10
Safetyinformation ....................................................................... 10
Transporting thedevice .................................................................. 10
Cleaningthe device ..................................................................... 11
Energysaving, disposalandrecycling .................................................... 11
CEmarking ............................................................................ 11
FCCComplianceStatement ............................................................. 12
FCCClass BComplianceStatement .................................................. 12
FCCRadiation ExposureStatement .................................................. 12
Gettingstarted ......................................................................... 13
Unpacking and ch e
ckingthe delivery .....................................................
13
Steps for initia
lsetup ....................................................................
13
Setting up the de
vice ....................................................................
14
Connecting the
machineto themains .....................................................
14
Connecting ex
ternaldevices .............................................................
15
Cable connect
ing ....................................................................
15
Disconnectin
gcables ................................................................
15
Ports on the d
evice ..................................................................
16
Connecting a
monitor ................................................................
17
Connecting t
hemouse ...............................................................
18
Connecting
the keyboard . ...........................................................
18
Connecting
external devices to the parallel (optional) or serial port . .....................
18
Connectin
gexternal devicesto theUSB ports .........................................
19
Switching
on for the firsttime:installing thesoftware .......................................
19
Switchin
gon monitoranddevice .....................................................
20
Installi
ngthe software ...............................................................
21
Operation .............................................................................. 22
Switchthe deviceon .................................................................... 22
Switchingon adevicewhen thelithium batteryis discharged (0-Watt devices) ............... 22
Switchingoff thedevice ................................................................. 23
Indicatorson thedevice ................................................................. 24
Keyboard ............................................................................... 25
Important keys and keyboard shortcuts . . . . ............................................ 25
Settingsin BIOSSetup .................................................................. 26
Property and data protection . . ........................................................... 27
Anti-theft protection and lead-sealing . . . . . . ............................................ 27
Mechanical casing lock (optional) . . ................................................... 28
BIOSsetup securityfunctions ........................................................ 29
Accessauthorisationvia SmartCard .................................................. 29
Operating the SmartCard reader (optional) ............................................ 29
Tr
oubleshootingandtips ..............................................................
30
Fujitsu 3
Contents
Helpif problemsoccur ................................................................... 30
Troubleshooting . . ....................................................................... 30
Powerindicatorremains offafter youhave switched onyour device ..................... 30
The device canno t be switched off with the ON/OFF switch . . . .......................... 31
The device cannot be switched on with the O N /O F F switch (0-Watt devices) . . ........... 31
Monitorremainsblank ............................................................... 32
Nomouse pointerdisplayedon thescreen ............................................ 33
Time and/or date is not correct . . . . . . ................................................. 33
Errormessageson thescreen ........................................................ 33
Installingnew software .................................................................. 34
Restoringthe harddisk contents ......................................................... 34
Tips .................................................................................... 34
Systemexpansions .................................................................... 35
Information about boards ................................................................ 36
Opening the casing . . ................................................................... 37
Closingthe casing ...................................................................... 38
Overviewof thedrive baysand drivesin yourdevice ....................................... 38
Installing and removing the accessible 5
1
/4inchdrive ...................................... 39
Fitting the drive cover for the 5
1
/4inchdrive ........................................... 39
Installingan accessibledrive ......................................................... 40
Removinganaccessibledrive ........................................................ 41
Installing/removing the SmartCard reader and/or WLAN module ( optional, 3½-Zoll) ........... 42
Removing the module holder . ........................................................ 43
Screwingthe WLANmoduleonto themoduleholder ................................... 43
Screwing the SmartCard reader onto the module holder . . .............................. 44
Installing the module holder with SmartCard reader and/or W LAN module . ............... 44
Removing the module holder with SmartCard reader a nd/or WLAN module . . . ........... 45
Removing the SmartC ard reader from the module holder . .............................. 46
Removing the WLAN module from the module holder .................................. 46
Removing and installing the memory card reader (opt iona l, 3½ inch, MultiCard) . . . ........... 47
Installing the memory card reader . . . ................................................. 47
Removing the memory card reader . . ................................................. 48
Installingand removingthehard diskdrive ................................................ 49
Installinga harddisk drive ........................................................... 50
Removingthehard diskdrive ........................................................ 51
Installing and removing a board . . ........................................................ 52
Installing a board . . . . ................................................................ 52
Removing a board . . . ................................................................ 54
Installing and removing heat sinks ........................................................ 55
Removing the heat sink . . ............................................................ 55
Installing the heat sink . . . ............................................................ 56
Mainboard expansions . . ................................................................ 56
Upgradingmainmemory ............................................................. 56
Replacingthe processor ............................................................. 56
Replacingthe lithiumbattery ......................................................... 56
Technicaldata ......................................................................... 58
Index .................................................................................. 59
4 Fujitsu
Your ESPRIMO
Your ESPRIMO
Overview
... is available with various configuration levels which differ in terms of hardware and software
equipment. You can install additional drives (for example a DVD drive) and other boards.
This manual tells you how to start using your device and how to operate it in daily use.
This manual applies for all configuration levels. Depending on the chosen configuration
level, some of the hardware components described may not be ava ilable on your PC.
Please also read the notes about your operating system.
Depending on the configuration selected, the operating system is preinstalled
on your hard disk (e.g. Windows).
Further information on this device is provided:
• in the poster "Getting Started"
• in the "Safety/regul
ations" manual
• in the "Warranty" manual
• in the op erating ma
nual for the monitor
• in the manual for the mainboard
• in your operating
system documentation
• in the information files (e.g. *.PDF, *.HTML, *.DOC, *.CHM, *.TXT, * .HLP)
Some of the manuals listed can be found in electronic form on the "Drivers & U tilities" DVD.
You can access and view the required information u sing the Acrobat Reader
program, which is also included on the DVD. You can of course also
print out a copy o f the manual if you prefer.
Fujitsu 5
Your ESPRIMO
Validity of the Reference Manual
This Reference Manual is valid for th e following systems:
• ESPRIMO P710, P705, P710, P720
• ESPRIMO P900, P910, P910-L, P920
Notational conventions
Pay particular attentio
n to text m a rked with this symbol. Failure to observe
these warnings could po
se a risk to health, damage the device or lead
to loss of data. The warr
anty will be invalidated if the device becomes
defective throu gh fail
ure to observe these warnings.
Indicates important information for the proper use of the device.
►
Indicates an activity that must be performed
Indicates a result
This font
indicates data entered using the keyboard in a program dialogue or at
the command line, e.g. your password (Name123) or a command used to
start a program (start.exe)
This font
indicates information that is displayed on the screen by a program, e.g.:
Installation is complete.
This font
indicates
• terms and texts used in a software interface, e.g.: Click on Save
• names of programs or files, e.g. Windows or setup.exe.
"This font"
indicates
• cross-references to another section, e.g. "Safety information"
• cross-references to an external source, e.g. a web address: For more
information, go to "http://www.fujitsu.com/fts/"
• Names of CDs, DVDs and titles or designations for other materials,
e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual
Key
indicates a key on the keyboard, e.g:
F10
This font
indicates terms and texts that are emphasised or highlighted, e.g.: Do
not switch off the device
6 Fujitsu
Ports and operating elements
Ports and operating elements
Ports
This chapter prese nts the individual hardware components of your device. This will provide
you with an overview of the p orts and operating elements on the device. Please familiarise
yourself with these components before starting to work with your device.
Front
2
3
4
5
6
7
8
1
1 = Module bay for 51/4inch drives
2 = Insert/eject button (CD/DVD) (optional)
3 = Module bay for 3
1
/2inch drives
4 = ON/OFF switch
5 = Headphone port
6 = Microphone jack
7 = USB ports
8 = Latch with optional casing lock
Fujitsu 7
Ports a nd operating elements
Rear
The power supply of your device depends on the selected configuration level:
• Device with alternating voltage socket, monitor socket and emergency on button
• Device with alternating voltage socket and main power switch
• Device with alternating voltage socket and monitor socket
Device with alternating voltage socket, monitor socket and emergency on button
4
5
2
3
1
1 = Monitor socket (AC OUT)
2 = Alternating voltage socket (AC IN)
3 = Emergency on button
4 = Ports for external devices
(device-dependent)
5 = Slot covers
8 Fujitsu
Ports and operating elements
Device with alternating voltage socket and main power switch
3
4
1
2
1 = Alternating volta
ge socket (AC IN)
2 = Main switch
3 = Ports for externa
l devices
(device-depend
ent)
4=Slotcovers
Device with alt
ernating voltage socket and monitor socket
3
4
1
2
1 = Alternating voltage socket (AC IN)
2 = Monitor socket (AC OUT)
3 = Ports for external devices
(device-dependent)
4=Slotcovers
Fujitsu 9
Important notes
Important notes
ImportantnotesNotes
In th is chapter you will find information regarding safety which it is essen tial to
take note of when working with your device.
Safety information
SafetyinformationNote
Please note the informat
ion provided in the "Safety/regulations" manual
andinthefollowingsafe
ty notes.
When installing and ope
rating the device, please observe the notes on
environmental conditi
ons in Chapter "
Technical da ta", Page 58 as well as
the instructions in Cha
pter "
Getting started", Page 13.
When setting up the dev
ice, make sure there is c learance all around it so tha t
the casing receives
enough ventilation. In order to avoid overheating, do not
cover the ventilati
on areas of the monitor or the device.
You must only opera
te the device if the rated vo ltage used by the
device is set to the
local mains voltage.
Themainswitch(if
present) and the ON/OFF switch do not disconnect the
device from the ma
ins voltage. To completely disconnect from the mains
voltage, re move t
he power plug from the power socket.
Replace the lit
hium battery on the mainboard in accordance with the instructions
in "
Replacing t
he lithium battery", Page 56.
Caution, compo
nents in the system can get very hot.
The activitie
s described in these instructions must always be
performed wit
h the greatest care.
Repairs to th
e device must only be performed by q ualifi ed technicians.
Incorrect re
pairs could put the user at great risk or cause serious damage
to the equip
ment (electric shock, risk of fire).
Transport
ing the device
Device,Transpor tationRetransportation
Transport all parts separately in their original packaging or in a packaging which
protects them from knocks and jolts, to the new site.
Do not unpack them until all transportation manoeuvres are completed.
If the device is brought from a co ld environment into the room where it will be used,
condensation may occur. Before operating the device, wait until it is absolutely dry
and has reached approximately the same temperature as the installation site.
10 Fujitsu
Important notes
Cleaning the device
Device,Transpor tationRetransportationSystem unit,seeDevice
Turn off all power and equipment switches and disconnect the power
plug from the mains outlet.
Do not clean any interior parts yourself, leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrode
plastic (alcohol, thinner or ace tone).
Never clean the device with water! Water entering into the device could
present a serious risk to users (e.g. electric sh ock).
Ensure that no liquid enters the system.
Thesurfacecanbeclea
ned with a dry cloth. If particularly dirty, use a cloth that has been
moistened in mild dome
stic detergent and then carefully wrung out.
Use disinfectant wi
pes to clean the keyboard and the mouse.
Energy saving, disposal and recycling
DisposalEnergysavingRecyclingDrivers& UtilitiesDVDUserDocumentationDVD
Further information can be found on the "Drivers & Utilities" DVD.
CE marking
CEmarkingCEmarkingNotesElectromagne
ticcompatibility
Lowvoltagedi
rective
The shipped version of this device complies w ith the requirements o f European Union directives
2004/108/EC "Elektromagnetische Verträglichkeit", 2006/95/EC "Niederspannungsrichtlinie" and
2009/125/EC "Ökodesign Richtlinie".
CE marking for
devices with radio component
This equipme
nt complies with the requirements of Directive 1999/5/EC of the European Parliament
and Commissi
on from 9 March, 1999 governing Radio and Telecommunications Equipment
and mutual r
ecognition of conformity.
This equipm
entcanbeusedinthefollowingcountries:
Belgium Bulgaria Denmark
Germany
Estonia Finland France
Greece
UK Ireland Iceland Italy
Latvia Liechtenst ein Lithuania Luxembourg
Malta Netherlands Norway Austria
Poland Portugal Rumania
Swede
n
Switzerland Slovakia Slovenia Spain
Czech Re public
Hungary
Cyprus Croatia
Con
tact the corresponding government office in the respective country for current information on
pos
sible operating restrictions. If your country is not included in the list, then please contact
th
e corresponding supervisory authority as to whether the use of this product is permitted in
yo
ur country.
Fujitsu 11
Important notes
FCC Compliance Statement
If the device complies with the FCC regulations, the FCC sign can be foun d on the type rating plate.
FCC Class B Compliance S tate
ment
DOC (INDUSTRY CANADA) NOTICES
Notice to Users of Radios and Television :
This class B digital apparatus complies with Canadian ICES-003.
The following statement applies to the products covered in this manual, unless otherwise specified
herein. The statement for other products will appear in the accompanying documentation.
NOTE:
This equipment has been tested and found to comply with the limits for a "Class B" digital
device, pursuant to Part 15 of the FCC rules and meets all requirements of the Canadian
Interference-Causing Equipment Standard IC ES-003 for digital apparatus. These limits are
designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in strict accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to r adio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the s
eparation between equipment and the rece iver.
• Connect the equipment into an outlet on a circuit different from th at to
which the receiver is connected.
• Consult the d
ealer or an experienced radio/TV technician for help.
Fujitsu not responsible for any radio or television interference caused by unauthorized modifications
of this equipment or the substitution or attachment of connecting cables and equipment other
than those specified by Fujitsu. The correction of interferences caused by such unauthorized
modification, substitution or attachment will be the responsibility of the user.
The use of shielded I/O cables is required when connecting this equipment to any and all optional
peripheral or host devices. Failure to do so may v iolate FCC and ICES rules.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
The transmitters in this device must not be co-located or op erated in conjunction
with any other antenna or transmitter.
To prevent radio interference to the licensed service , this device is intended to be
operated indoors and away from windows to provide maximum shielding. Equipment (or
its transmit antenna) that is installed outdoors is subject to licensing.
Users are not authorized to modify this product. Any m odi fications invalidate the warranty.
This equipment may not be modified, altered, or chan ged in any way without signed
written permission from Fujitsu. Unauthorized modification will void the equipment
authorization from the FCC and Industry Canada and the warranty.
12 Fujitsu
Getting started
Getting started
Gettingstarted
Please observe the safety information in the "Important notes", Page 10 chapter.
Unpacking and checking the delivery
It is recommended not to throw away the original packaging material! It may be
required for reshipment at some later date.
PackagingContentsofdeliveryPackaging,
► Unpack all the individual parts.
► Check the contents of the package for any visible damage caused during transport.
► Check whether the delivery conforms to the details in t he delivery note.
► Should you discover t hat the d elivery does not correspond to the delivery
note, notify your local sales outlet immediately.
Steps for initial setup
Preparingforfirstuse, overviewPreparingforuse,
Only a few steps are necessary to put your new device into operation for the first time:
• Select a location for device and set up device
• Connect external devices such as mouse, keyboard and monitor
• Check the voltage at the mains outlet and connect the device to an electrical outlet
• Switch the device on
You will learn more about the individual steps in the following sections.
External devices
If you have received other external devices in addition to your own device (e.g.
a printer), do not connect these until after the initial installation. The following
sections describe how to connect these external devices.
Drives and boards
If you have received drives or boards with your device, please do not install
them until after first-time setup. How to install drives and boards is described
in the "
System expansions", Page 35 chapter.
Fujitsu 13
Getting started
Setting up the device
WorkstationErgonomicDevi ce
When installing your device, please read the recommendations and safety
notes in the "Safety/regulations" manual.
We recommend that you place your device on a surface which is not slippery. In
view of the many different finishes and varnishes used on furniture, it is possible
that the rubber feet will mark the surface they stand on.
Depending on the location of your device, bothersome vibrations and noises may
occur. To prevent this, a distance of at lea st 10 mm / 0.39 in should be maintained
from other devices on casing sides without ventilation surfaces.
In order to avoid overheating, do not cover the ventilation areas
of the monitor or the device.
A minimum distance of 200 mm / 7.87 in from the device must be
observed for ventilation areas.
Do not stack several devices on top of each other.
Do not expose the device to extreme ambient conditions (see "
Technical data", Page 58,
section "Ambient conditions"). Protect the device against dust, humidity and heat.
Connecting the machine to the mains
Mainsadapter,
2
1
► Connect the mains cable to the machine (1).
► Plug th
e mains plug into a three-pin socket (2).
14 Fujitsu
Getting started
Connecting external devices
Read the documentation on the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before connecting external devices!
Do not connect or disconnect cables during a thunderstorm.
Always take hold of the actual plug w hen disconnecting a cable. Never pull the cable!
Connect and disconnect the cables in the order described below.
Cable connecting
► Switch off all affected devices.
CordCable
► Remove power plugs from the mains outlets for all devices.
► Plug all cables into the device and peripherals. Please make sure that you always
observe the safety notes provided in "
Important not es", Page 10.
► Plug a ll data communica tion cables into the sockets provided for the data
/ telecommunication networks.
► Plug all power cables into the grounded mains outlets.
USB devices are hot-pluggable. This means you can connect and disconnect
USB cables while your device is switched on.
Additional information can be found in "
Connecting external devices to the USB
ports", Page 19 and in the documentation for the USB devices.
Disconnecting cables
► Switch off al
l affected devices.
Cable
► Remove power plugs from the mains outlets for all devices.
► Unplug all
data communication ca bles from the utility sockets.
► Unplug all cables from the device and peripherals.
Fujitsu 15
Getting started
Ports on the device
PortsExternaldevicesDevice
The ports are located on the front and back of the device. The ports available on your
device depend on the configuration level you have selected. The standard ports are
marked with the symbols shown below (or similar). Detailed information on the location
of the ports is provided in the manual for the mainboard.
PS/2 keyboard port, purple
Keyboardport
Parallel port/printer (op tional)
ParallelportPrinter
1
Serial port 1, turquoise
Serialport
2
Serial port 2, turquoise
Serialport
VGA monitor connection, blue
Monitorport
Microphone port, pink (back of
device) or black (front of device)
Microphonejack
Headphones, light green (back
of device) or black (front of
device)
Headphones
Audio input (Line in), light blue
AudioinputLinein
Audio output (Line out), light
green
AudiooutputLineout
PS/2 mouse port, green
MouseportPS/2mouseport
USB - Universal Serial Bus,
black
UniversalSerialBus
LAN
LAN port
LANport
DVI-I monitor port DP DisplayPort
Some of the connected devices require special softw are (e.g. drivers) (refer to the
documentation for the connected device and operating system).
16 Fujitsu
Loading...