Fujitsu ESPRIMO P5645, ESPRIMO P5730, ESPRIMO P5731, ESPRIMO P7935, ESPRIMO P7936 Operating Manual
...
System
Operating Manual
ESPRIMO P5635 / P5645 / P5730
ESPRIMO P5731 / P7935
ESPRIMO P7936 / P9900
Congratulations, you have
decided to buy an
innovative Fujitsu product.
The latest information about our products, useful tips, updates etc. is available
from our website: "
http://ts.fujitsu.com"
For automatic driver updates, go to: "http:/ /support.ts.fujitsu.com/com/support/index.html"
Should you have any technical questions, please contact:
• our Hotline/Service Desk
(see Service Desk list o r visit: "
http://ts.fujitsu.com/support/servicedesk.html" )
• Your sales partner
• Your sales office
We hope you really enjoy using yo ur new Fujitsu system.
Copyright
Fujitsu Tech
nology Solutions 2010 2010/02
Published by
Fujitsu Technology Solutions GmbH
Mies-van-der
-Rohe-Straße 8
80807 Munich, Germany
Contact
h
ttp://ts.fuji
tsu.com/support
All rights reserved, including intellectual property rights. Technical data subject to modifications and delivery subject to
availability. Any liability that the data and illustrations are complete, actual or correct is excluded. Designations may be
trademarks and
/or copyrights of the respective manufacturer, the use of which by third parties for their own purposes may
infringe the rights of such owner. You will find more information at "
http://ts.fujitsu.com/terms_of_use.html"
Order No. Fujit
su Technology Solutions GmbH: A26361-K1006-Z220-1-7619, edition 4
ESPRIMO P5635 / P5645 / P5730
ESPRIMO P5731 / P7935
ESPRIMO P7936 / P9900
Operating Manual
Your ESPRIMO 5
Ports and operating elements 7
Important notes 9
Getting started 12
Operation 22
Troubleshooting and tips 30
System expansions 35
Technical data 62
Index 63
ESPRIMO is a registered trademark of Fujitsu Technology Solutions GmbH.
Windows 7, Windows Vista and Windows XP are registered trademarks of Microsoft Corporation.
PS/2 is a registered trademark of International Business Machines, Inc.
Pentium is a registered trademark of I ntel Corporation, USA.
Kensington and MicroSaver are registered trademarks of ACCO World Corporation.
All other trademarks referenced are trademarks or registe red trademarks of their
respective owners, whose protected rights are acknowledged.
Copyright © Fujitsu Technology Solutions GmbH 2010
All rights reserved, including rights of translation, reproduction by printing, copying
or similar methods, either in part or in whole.
Noncompliance is subject to compensation for damages.
All rights reserved, including rights created by patent grant or registration of a utility model or design.
Subject to availability and tech nical modifications.
Contents
Contents
YourESPRIMO ......................................................................... 5
Notational conventions .................................................................. 6
Ports and operating elemen
ts .........................................................
7
Front ................................................................................... 7
Rear ................................................................................... 8
Important notes ........................................................................ 9
Safetyinformation ....................................................................... 9
Transporting thedevice .................................................................. 9
Cleaning the device ..................................................................... 10
Energysaving, disposal and recycling .................................................... 10
CEmarking ............................................................................ 11
Gettingstarted ......................................................................... 12
Unpacking and chec
kingthe delivery .....................................................
12
Steps for initial s
etup ....................................................................
12
Setting up the dev
ice ....................................................................
13
Connecting the ma
chineto themains .....................................................
13
Switchingonfort
he firsttime: installingthe software .......................................
14
Switchingonmon
itorand device .....................................................
14
Installing the s
oftware ...............................................................
16
Connecting ext
ernaldevices .............................................................
17
Cable connect
ing ....................................................................
17
Disconnectin
gcables ................................................................
17
Ports on the de
vice .....................................................................
18
Connecting a
monitor ...................................................................
18
Connecting t
hemouse ..................................................................
20
Connecting a
USBmouse ............................................................
20
Connecting
aPS/2 mouse ...........................................................
20
Connecting
the keyboard . . . . . ...........................................................
20
Connectin
g a USB keyboard . . .......................................................
20
Connectin
g a PS/2 keyboard . . .......................................................
20
Connecti
ng externa l devices to the parallel (optional) or serial port . .........................
20
Port sett
ings ........................................................................
21
Device dr
ivers ......................................................................
21
Connect
ingexternal devicesto theUSB ports .............................................
21
Device d
rivers ......................................................................
21
Operation .............................................................................. 22
Switchthe deviceon .................................................................... 22
Switchingon adevice whenthe lithiumbattery isdischarged (0-Watt devices) ............... 22
Switchingoff the device ................................................................. 23
Indicatorson thedevice ................................................................. 24
Keyboard ............................................................................... 25
Important keys and keyboard shortcuts . . . . ............................................ 25
Settingsin BIOSSetup .................................................................. 26
Property and data protection . . ........................................................... 26
Anti-theft protection and lead-sealing . . . . . . ............................................ 27
Mechanical casing lock (optional) . . ................................................... 28
BIOSsetup securityfunctions ........................................................ 28
Accessauthorisation viaSmartCard .................................................. 29
Fujitsu Technology Solutions 3
Contents
Accessprotection with SystemLock ................................................... 29
Troubleshooting andtips .............................................................. 30
Helpif problems occur ................................................................... 30
Troubleshooting . . ....................................................................... 30
Powerindicator remains off afteryou haveswitchedon yourdevice ..................... 30
The device cannot be switched off with the ON/OFF switch. . . .......................... 31
The device cannot be switched on with the ON/OFF switch (0-Watt devices) . . ........... 31
Monitorremains blank ............................................................... 31
Nomouse pointerdisplayed on the screen ............................................ 33
Time and/or date is not correct . . . . . . ................................................. 34
Errormessages onthe screen ........................................................ 34
.................................................................................... 34
Installingnew software .................................................................. 34
Restoringthe harddisk contents ......................................................... 34
Tips .................................................................................... 34
Systemexpansions .................................................................... 35
Information about boards ................................................................ 36
Opening the casing . . ................................................................... 37
Closingthe casing ...................................................................... 38
Installingthe locking device with casing lock .............................................. 39
Removingthe locking device ........................................................ 39
Installingthe locking device with casing lock ........................................... 40
Opening the drive cage . . ................................................................ 41
Closingthe drivecage ................................................................... 42
Removingventilation duct ............................................................... 43
Installingthe ventilation duct ............................................................. 44
Installing and removing a board . . ........................................................ 45
Installing a board . . . . ................................................................ 45
Removing a board . . . ................................................................ 46
Low-profileboards ...................................................................... 48
Fitting a slot adapter . ................................................................ 48
Removing a slot adapter . ............................................................ 49
Installing and removing optional ports . . . . ................................................. 49
Installingand removing drives ............................................................ 49
Removingan accessible drive ........................................................ 50
Installingan accessible drive ......................................................... 51
Installingand removing the hard diskdrive ............................................ 52
Installing/removing a SmartCard reader and/or W LAN module (optional) . . ............... 55
Installing USB ports on the rear panel . . . ................................................. 59
Mainboard expansions . . ................................................................ 60
Upgradingmain memory ............................................................. 60
Replacingthe processor ............................................................. 60
Replacingthe lithiumbattery ......................................................... 61
Technicaldata ......................................................................... 62
Index .................................................................................. 63
4 Fujitsu Technology Solutions
Your ESPRIMO
Your ESPRIMO
Overview
... is available with various configuration levels with different hardware and software. You can
incorporate accessible drives (for example a DVD drive) as well as other boards.
This ma nual tells you how to start using your device and how to operate it in daily use.
This manual applies for all configuration levels. Depending on the chosen configuration
level, some of the hardware components described may not be available on your PC.
Please also read the notes about your operating system.
Depending on the configuration selected, the operating system is preinstalled
on your hard disk (e.g. Windows 7).
Further information on this device is provided:
• in the poster "Getting Started"
• in the "Safety" manual
• in the "Warranty" manual
• in the operating m a nual for th
emonitor
• in the manual for the mainboard
• in your operating system docum
entation
• in the information files (e.g. *.PDF, *.HTML, *.DOC, *.CHM, *.TXT, *.HLP)
Some of the manuals listed can be found in electronic form on the "Drivers & Utilities" DVD.
You can access and view the required information using the Acrobat Reader
program, which is also included on the DVD. You can of course also
print out a copy of the manual if you prefer.
Fujitsu Technology Solutions 5
Your ESPRIMO
Notational conventions
Pay particular attention to text marked with this symbol. Failure to observe
these warnings could p ose a risk to health, damage the device or lead
to loss of data. The warranty will be invalidated if the device becomes
defective through failure to observe these warnings.
Indicates important informat
ion for the proper use of the device.
►
Indicates an activity that must be perfo rmed
Indicates a result
This font
indicates data entered usin
g the keyboard in a program dialogue or at
the command line, e.g. your p
assword (Name123) or a command used to
start a program (start.ex
e)
This font
indicates information that is displayed on the screen by a program, e.g.:
Installation is complete.
This font
indicates
• terms and texts used in a software interface, e.g.: Click on Save
• names of programs or files, e.g. Windows or setup.exe.
"This font"
indicates
• cross-references to anot her section, e.g. "Safety information"
• cross-references to an external source, e.g. a web address: For more
information, go to "
http://ts.fujitsu.com"
• Names of CDs, DVDs and titles or designations of other materials, e.g.:
"CD/DVD Drivers & Utilities" or "Safety" Manual
Key
indicates a key on the keyboard, e.g:
F10
This font
indicates terms and texts that are emphasised or highlighted, e.g.: Do
not switch off the device
6 Fujitsu Technology Solutions
Ports and operating elements
Ports and operating elements
Ports
This chapter presents the individual hardware components of your device. This will provide
you with an overview of the ports and operating elements on the device. Please familiarise
yourself w ith these components before starting to work with your device.
Front
1
2
3
4
5
6
1 = Optical drive
2 = Module bay
3 = Headphone port
4 = Microphone jack
5 = USB ports
6 = ON/OFF switch
Fujitsu Technology Solutions 7
Ports and operating elem ent s
Rear
1
2
3
1 = Power connector for computer
2 = Power connector for monitor
(device-dependent)
3 = Ports for external devices
8 Fujitsu Technology Solutions
Important notes
Important notes
ImportantnotesNotes
In this chapter you will find information regarding safety which it is essential to
take note of when working with your device.
Safety information
SafetyinformationNote
Pay attention to the information
provided in the "Safety" manual
and in the following safety note
s.
When installing and operating th
e device, please observe th e no tes on
environmental conditions in Cha
pter "
Technical data", Page 62 as well as
the instructions in Chapter "
Ge
tting started", Page 12.
When setting up the device, make s
ure there is clearance all around it so that
the casing receives enough ven
tilation. In order to avoid overheating, do not
cover the ventilation areas o
f the monitor or the device.
You must only operate the devic
e if the rated voltage used by the
device is set to the local main
s voltage.
The main switch (if present) an
d the ON/O FF switch do not disconnect the
device from the mains voltage
. To com pletely disconnect from the mains
voltage, remove the power plu
g from the power socket.
Replace the lithium battery
on the mainboard in accordance with the instructions
in "
Replacing the lithium ba
ttery", Page 61.
Caution, components in the s
ystem can get very hot.
The activities described in
these instructions must always be
performed with the greatest
care.
Repairs to the device must on
ly be carried out by qualified technicians. Incorrect
repairs could put the user at
great risk (electric shock, hazardous energy emissions,
risk of fire) or cause serio
us damage to the equipmen t.
Transporting the device
Device,TransportationRetransportation
Transport all parts separately in their original packaging or in a packaging which
protects them from knocks and jolts, to the new site.
Do not unpack them until all transportation manoeuvres are completed.
If the device is brought from a cold environment into the room whe re it will be used,
condensation may occur. Before operating the device, wait until it is absolutely dry
and has reached approximately the same tempe rature as the installation site.
Fujitsu Technology Solutions 9
Important notes
Cleaning the device
Device,TransportationRetransportationSystem unit,seeDevice
Turn off all power and equipment switches and disconnect the power
plug from the mains outlet.
Do not clean any interior parts yourse lf, leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrode
plastic (alcohol, thinner or acetone).
Never clean the device with water! Water entering into th e device could
present a serious risk to users (e.g. electric shock).
Ensure that no liquid enters the system.
The surface can be cleaned with a dry
cloth. If particularly dirty, use a cloth that has been
moistened in mild domestic deterg
ent and then carefully wrung out.
Use disinfectant wipes to clean t
he keyboard and the mouse.
Energy saving, disposal and recycling
DisposalEnergysavingRecyclingDrivers&UtilitiesDVDUserDocumentationDVD
Further information can be found on the "Drivers & Utilities" DVD.
10 Fujitsu Technology Solutions
Important notes
CE marking
CEmarkingCEmarkingNotesElectromagneticcompatibilityLowvoltagedirective
The shipped version of this device complies with the requirements of EEC
directives 2004/108/EC "Electromagnetic compatibility" and 2006/95/EC
"Low voltage directive".
CE marking for devices with radio component
This equipment complies with the requirements of Directive 1999/5/EC of the
European Parliament and Commission from 9 March, 1999 governing Radio
and Telecommunications Equipment and mutual recognition of conformity.
This equipment can be used in the following countries:
Belgium Bulgaria Denmark
Germany
Estonia Finland France
Greece
UK Ireland Iceland Italy
Latvia Liechtenstein Lithuania Luxembourg
Malta Netherlands Norway Austria
Poland Portugal Rumania
Sweden
Switzerland Slovakia Slovenia Spain
Czech Republic
Hungary
Cyprus
Contact the corresponding government office in the respective country for
current information o n possible operating restrictions. If your country is
not included in the list, then please contact the corresponding supervisory
authority as to whether the use of this product is permitted in y our country.
Fujitsu Technology Solutions 11
Getting started
Getting started
Gettingstarted
Please observe the safety information in the "Important notes", Page 9 chapter.
Unpacking and checking the delivery
It is recommended not to throw away the original packaging material! It may be
required for reshipment at some later date.
PackagingContentsofdeliveryPackaging,
► Unpack all the individual parts.
► Check the contents of the package f
or any visible damage ca used during transport.
► Check whether the delivery conforms to the details in the delivery note.
► Should you discover that the deli
very does not correspond to the delivery
note, notify your local sales out
let immediately.
Steps for initial setup
Preparingforfirstuse, overviewPreparingforuse,
Only a few step s are necessary to put your new device into operation for the first time:
• Select a location for device and set up device
• Connecting external devices
• Check the voltage at the mains outlet and connect the device t o an electrical outlet
• Switch the device on
You will learn more about the individual steps in the following sections.
External devices
If you have received other external devices in addition to your own device (e.g.
a printer), do not connect these until after the initial installation. The following
sections describe how to connect these external devices.
Drives and boards
If you have received drives or boards with your device, please do not install
them until after first-time setup. How to install drives and boards is described
in the "
System expansions", Page 35 chapter.
12 Fujitsu Technology Solutions
Getting started
Settingupthedevice
WorkstationErgonomicDevi ce
When setting up your device, please r ead the recommendations and
safety notes in the "Safety" manual.
We recommend that you place your device on a surface which is not slippery. In
view of the many different finishes and varnishes used on furniture, it is possible
that the rubber feet will mark the surface they stand on.
Depending on the location of your device, troublesom e vibrations and noises
may occur. To prevent this, a distance of at least 10 mm should be maintained
from other devices on casing sides without ventilation surfaces.
In order to avoid overheating, do not cover the ventilation areas
of the monitor or the device.
Do not stack several devices on top of each other.
Do not expose the device to extreme ambient conditions (see "
Technical data", P age 62,
section "Ambient conditions"). Protect the device against dust, humidity and heat.
Operating position
Use the device only in the verti
cal operating position.
Connecting the machine to the mains
Mainsadapter,
2
1
► Connect the mains cab
le to the machine (1).
► Plug the mains plug into a three-pin socket (2).
Fujitsu Technology Solutions 13
Getting started
Switching on for the first time: installing the software
Installing,Software,Installing,
Once the installation has been started the device must not be switched
off, unless the installation h as been completed.
During installation, the device may only be reboo ted when you are requested to do so!
The installation will otherwise not be carried out correctly and the contents
of the hard disk must be completely restored.
If the device is integrated into
a network, the user and server details as well as
the ne twork protocol are requir
ed during the software installation.
Contact your network administr
ator if you have any questions about these settings.
When you switch on the device for t
he first time, the supplied software
is installed and configured. Pla
n a reasonable amount of time for this,
as this process must not be inter
rupted.
You may need the licence number
for Windows during the installation. The licence
number is located on a sticker o
n your device.
Switching on monitor and device
Device,Monitor,
Depending on th e version, the device m a y be equipped with a main power switch
on the back of the device in addition to the ON/OFF button on the front. As a
result, there are different ways to switch on the two variants.
► Switch the monitor on (see the operating manual for the monitor).
► Switch the device on. To do this, follow the instructions below.
14 Fujitsu Technology Solutions
Getting started
Switching on the device (with main power switch)
0
1
I
0 = Device is off I = Device is on
► Swit
ch the device on with the main power switch (1) on the back of the device.
► Press the ON/OFF switch (2) on the front of the device.
The po
wer-on indicator lights green and the device is started.
Fujitsu Technology Solutions 15
Getting started
Switching on the device (without main power switch)
► Press the ON/OFF switch on the front of the device.
The power-on indicator lights green and the device is started.
Installing the software
► During installation, follow the on-screen instructions.
Software,Installing,
► If anything is unclear regarding the data you are asked to input, read the
online He lp in your operating system.
You will find more information on the system, as w ell as drivers, utilities and updates on
the "Drivers & Utilities" DVD and on the Internet under "
http://ts.fujitsu.com/support/".
16 Fujitsu Technology Solutions
Getting started
Connecting external devices
Read the documentation on the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before con necting external devices!
Do not connect or disconnect c ables during a thunderstorm.
Always take hold of the actual plug when disconnecting a cable. Never pull the cable!
Connect and disconnect t he cables in the order described below.
Cable connecting
► Switch off all affected devices.
CordCable
► Remove power plugs from the mains outlets for all devices.
► Plug all cables into the device and peripherals. Please make sure that you always
observe the safety notes provided in "
Important notes", Page 9.
► Plug all data communication cables into the sockets provided for the data
/ telecommunication networks.
► Plug all power cables into the grounded mains outlets.
Disconnecting cables
► Switch off all affected devices.
Cable
► Remove power plugs from the mains outlets for all devices.
► Unplug all data communication cables from the utility sockets.
► Unplug all cables from the device and peripherals.
USB devices are hot-pluggable. This means you can connect and disconnect
USB cables while your device is switched on.
Additional information can be found in "
Connecting external devices to the USB
ports", Page 21 and in the documentation for the USB devices.
Fujitsu Technology Solutions 17
Loading...