Fujitsu ESPRIMO E4xx, ESPRIMO E5xx, ESPRIMO E4 Series, ESPRIMO E5 Series, ESPRIMO E410 Operating Manual

...

System

Operating Manual

ESPRIMO E4xx / E5xx

Thank you for buying an inno

vative product from Fujitsu.

Latest information abo

ut our products, useful tips, updates etc. is available

on our website: "

http:

//www.fujitsu.com/fts/"

You can ﬁnd driver upda

tes at: "

http://support.ts.fujitsu.com/download"

Should you have any te

chnical questions, please contact:

• our Hotline/Service

Desk (see Service Desk list or from the Internet at:

http://support.t

s.fujitsu.com/contact/servicedesk")

• Your sales partner

• Your sales ofﬁce We hope you enjoy using your new Fujitsu system!

Published by / Contact address in the EU

Fujitsu Te

chnology Solutions GmbH

Mies-van-der-Rohe-Straße 8

80807 Munich, Germany

http://

www.fujitsu.com/fts/"

©Fujits

Publication Date

02/2013

Order No.: A26361-K1185-Z320-1-7619, edition 1

ESPRIMO E4xx / E5xx

Operating Manual

Your ESPR IMO 5

Important notes 7

Ports and operating elements 11

Getting started 13

Operation 22

Problem solutions and tips 27

System expansions 31

Technical speciﬁcation 55

Index 56

Remarks

Information on the product description meets the design speciﬁcations of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notiﬁcation. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions.

Trademarks

Fujitsu, the Fujitsu logo and ESPRIMO are registered trademarks of Fujitsu Limited or its subsidiaries in the United States of America and other countries.

Kensington, MicroSaver and K-Slot are registered trademarks of ACCO Brands.

Microsoft and Windows are trademarks or registered trademarks of the Microsoft Corporation in the United Sta tes and/or other countries.

All other trademarks speciﬁed here are the property of their respective owners.

No part of this publication may be copied, reproduced or translated without the prior written consent of Fujitsu.

No part of this publication may be saved or transferred by any electronic means without the written approval of Fujitsu.

Contents

YourESPRIMO ......................................................................... 5

Validityof the ReferenceManual ......................................................... 5

Notational conventions .................................................................. 6

Important notes ........................................................................ 7

Safetyinformation ....................................................................... 7

Transporting the device

..................................................................

Cleaning the device ..................................................................... 8

Energy saving, disposa

landrecycling ....................................................

CEmarking ............................................................................ 9

FCC Compliance Statem

ent .............................................................

FCC Class B Compliance

Statement ..................................................

FCC Radiation Exposu

re Statement ..................................................

Portsand operating elements ......................................................... 11

Front ................................................................................... 11

Rear ................................................................................... 12

Getting started ......................................................................... 13

Unpacking and che

ckingthe delivery .....................................................

Steps for initia

lsetup ....................................................................

Setting up the de

vice ....................................................................

Vertical opera

ting position (optional) . . . . . . ............................................

Connecting th

edevice to the mains supply ................................................

Switchingonf

or the ﬁrst time: installing the software .......................................

Switchingonm

onitorand device .....................................................

Installing t

hesoftware ...............................................................

Connecting e

xternaldevices .............................................................

Connecting t

hecables ...............................................................

Disconnect

ingthe cables ............................................................

Ports on the

device ..................................................................

Connectin

gamonitor ................................................................

Connectin

gthemouse ...............................................................

Connecti

ng the keyboard . ...........................................................

Connecti

ngexternal devices tothe serial interface .....................................

Connecti

ngexternal devices tothe USB ports .........................................

Operation .............................................................................. 22

Switchthe device on .................................................................... 22

Switching offthe device ................................................................. 22

Indicatorson the device ................................................................. 23

Keyboard ............................................................................... 24

Important keys and keyboard shortcuts . . . . ............................................ 24

Settingsin BIOS Setup .................................................................. 25

Property and data protection . . ........................................................... 26

Anti-theft protection and lead-sealing . . . . . . ............................................ 26

Prob

lemsolutions and tips ............................................................

Hel

pifproblems occur ...................................................................

Tro

ubleshooting .........................................................................

Pow

erindicator remains off afteryou have switched on your device .....................

e d evice cannot be switched off with the ON/OFF switch .............................

Fujitsu 3

Contents

Monitorremains blank ............................................................... 28

Nomouse pointer displayed on the screen ............................................ 29

Time and/or date is not correct . . . . . . ................................................. 29

Errormessages on the screen ........................................................ 29

Installingnew software .................................................................. 30

Restoring the hard diskcontents ......................................................... 30

Tips .................................................................................... 30

Systemexpansions .................................................................... 31

Information about board s ................................................................ 32

Opening the casing . . ................................................................... 33

Removing a cover ................................................................... 33

Removing t he front panel ............................................................ 34

Closethe casing ........................................................................ 35

Securing the front panel . ............................................................ 35

Reattaching the cover ............................................................... 36

Removing the drive carrier ............................................................... 37

Installingthe drive cage ................................................................. 38

Installingand removing drives ............................................................ 39

Removing and installing accessible drives ............................................. 39

Removing a hard diskdrive .......................................................... 46

Installinga hard disk drive ........................................................... 48

Installing and removing heat sinks ........................................................ 50

Removing the heat sink . . ............................................................ 50

Installing t he heat sink . . . ............................................................ 50

Assembling and dismantling low-proﬁle units .............................................. 51

Removing a slot cover ............................................................... 51

Installing a board . . . . ................................................................ 52

Removing boards ................................................................... 52

Reinstallinga slot cover .............................................................. 53

Mainboard expansions . . ................................................................ 53

Upgrading main memory ............................................................. 53

Processor, replacing ................................................................. 53

Replacing the lithium battery ......................................................... 54

Technical speciﬁcation ................................................................. 55

Index .................................................................................. 56

4 Fujitsu

Your ESPRIMO

Overview

... is available with various conﬁguration levels which differ in terms of hardware and software equipment. You can install additional drives (for exa m ple a DVD drive) and other boards.

This manual tells you how to start using your device and how to operate it in daily use. This manual applies for all c onﬁguration levels. Depending on the cho sen conﬁguration level, some of the hardware components described may not be ava ilable on your PC. Please also read the notes about your operating system.

Depending on the conﬁguration selected, the operating system is preinstalled on your hard disk (e.g. Windows).

Further information on this device is provided:

• in the "Quick Start Guide" poster

• in the "Safety/regul

ations" manual

• in the "Warranty" manual

• in the op erating ma

nual for the monitor

• in the manual for the mainboard

• in your operating

system documentation

• in the information ﬁles (e.g. *.PDF, *.H T ML, *.DOC, *.CH M, *.TXT, *.HLP)

Some of the manuals listed can be found in electronic form on the "Drivers & Utilities" DVD.

You can access and view the required information using the Acrobat Reader program, which is also included on the DVD. You can of course also print out a copy of the manual if you prefer.

ValidityoftheReferenceManual

This Reference Manual is valid for the following systems:

• ESPRIMO E410

• ESPRIMO E420

• ESPRIMO E520

Fujitsu 5

Your ESPRIMO

Notational conventions

Pay particular attention to text marked with this symbol. Failure to observe these warnings could pose a risk to health, damage the device or lead to loss of data. The warranty will be invalidated if the device becomes defective through failure to observe these warnings.

Indicates important informa

tion for the proper use of the device.

►

Indicates an activity t hat must be performed



Indicates a result

This font

indicates data e ntered

using the keyboard in a program dialogue or at

the command line, e.g.

your password (Name123) or a command used to

start a program (star

t.exe)

This font

indicates information that is displayed on the screen by a program, e.g.:

Installation is complete.

This font

indicates

• terms and texts used in a software interface, e.g.: Click on Save

• names of programs or ﬁles, e.g. Windows or setup.exe.

"This font"

indicates

• cross-references to another section, e.g. "Safety information"

• cross-references to an external source, e.g. a web address: For more information, go to "

http://www.fujitsu.com/fts/"

• Names of CD s, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual

Key

indicates a key on the keyboard, e.g:

F10

This font

indicates terms a nd texts that are emphasised or highlighted, e.g.: Do not switch off th e device

6 Fujitsu

Important notes

ImportantnotesNotes

In this chapter you will ﬁnd information regarding safety which it is essential to take note of when working with your device.

Safety information

SafetyinformationNote

Please note the informat

ion provided in the "Safety/regulations" manual

and in the following safe

ty notes.

When installing and ope

rating the device, please observe the notes on

environmental conditi

ons in Chapter "

Technical speciﬁcation" , Page 55 as well

as the instructions in C

hapter "

Getting started", Page 13.

When setting up the dev

ice, make sure there is clearance all around it so that

thecasingreceives

enough ventilation. In order to avoid overheating, do not

cover the ventilati

on areas of the monitor or the device.

You must only opera

te the device if the rated voltage used by the

device is set to the

local mains voltage.

The main switch (if

present) and the ON/O FF switch do not disconnect the

device from the ma

ins voltage. To completely disconnect from the mains

voltage, remove t

he power plug from the power socket.

Only operate th

e device with the casing closed.

Replace the lit

hium battery on the mainboard in accordance with the instructions

in "

Replacing t

he lithium battery", Page 54.

Caution, comp

onents in the system can get very hot.

The activiti

es described in these instructions must always be

performed wi

th the greatest care.

Repairs to th

e device must only be performed by qualiﬁed technicians.

Incorrect r

epairs could put the user at great risk or cause serious damage

to the equ i

pment (electric shock, risk of ﬁre).

Transpor

ting the device

Device,Trans po

rtation

Retrans

portation

Transport all parts separately in their original packaging or in a packaging which protects them from knocks and jolts, to the new site.

Do not unpack them until all transportation manoeuvres are completed.

If the device is broug ht from a cold environment into the room where it will be used, condensation may occur. Before operating the device, wait until it is absolutely dry and has reached approximately the same temperature as the installation site.

Fujitsu 7

Important notes

Cleaning the device

Device,Transpo rtationRetransportationSystemunit,seeDevi ce

Turn off all power and equipment switches and disconnect the power plug from the mains outlet.

Do not clean any interior parts yourse lf, leave this job to a service technician.

Do not use any cleaning agents that contain abrasives or may corrode plastic (alcohol, thinner or acetone).

Never clean the device with water! Water entering into th e device could present a serious risk to users (e.g. electric shock).

Ensure that no liquid enters the system .

The surface can be clea

ned with a dry cloth. If particularly dirty, use a cloth that has been

moistened in mild dome

stic detergent and then carefully wrung out.

Use disinfectant wi

pes to clean the keyboard and the mouse.

Energy saving, disposal and recycling

DisposalEnergysavingRecyclingDrivers&UtilitiesDVDUserDocumentationDVD

You c a n ﬁnd information on these subjects on the "Drivers & Utilities" DVD or on our website ("

http://www.fujitsu.com/fts/about/fts/environment-care/").

8 Fujitsu

Important notes

CE marking

CEmarkingCEmarkingNotesElectromagneticcompatibilityLowvoltagedirective

The shipped version of this device complies with the requirements of European Union directives 2004/108/EC "Electromagnetic compatibility", 2006/95/EC "Low voltage directive" and 2009/125/EC "Ecodesign".

CE marking for devices with radio component

This equipment complies with the requirements of Directive 1999/5/EC of the E urop ean Parliament and Commission from 9 March, 1999 governing Radio and Telecommunications Equipment and mutual recognition of conformity.

The CE marking valid for your device can b e found on the device label.

Explanation: CE nnnn (!) ; nnnn deﬁnes the type of CE marking and the exclamation mark indicates a device with radio components.

You c a n ﬁnd more information and declarations of c onfo rmity on the Internet at:

http://globalsp. ts.fujitsu.com/sites/certiﬁcates".

This equipment can be used in the following countries:

Belgium Bulgaria Denmark

Germany

Estonia Finland France

Greece

UK Ireland Iceland Italy

Croatia

Latvia Liechtenstein Lithuania

Luxembourg Malta Netherlands Norway

Austria Poland Portugal Ruma nia

Sweden Switzerland Slovakia Slovenia

Spain Czech Republic

Hungary

Cyprus

Contact the corresponding government ofﬁce in the respective country for curre nt information on possible operating restrictions. If your country is not included in the list, then please contact the corresponding supervisory authority as to whether the use of this product is permitted in your country.

Fujitsu 9

Important notes

FCC Compliance Statement

If th e device complies with the FCC regulations, the FCC sign can be found on the type rating plate.

FCC Class B Compliance S tate

ment

DOC (INDU STRY CANADA) NOTICES Notice to Users of Radios and Television:

This class B digital apparatus complies with Canadian ICES-003.

The following statement applies to the products covered in this manual, unless otherwise speciﬁed herein. The statement for other products will appear in the accompanying documentation.

NOTE:

This equipment has been tested and found to comply with the limits for a "Class B" digital device, pursuant to Part 15 of the FCC rules and meets all requirements of the Canadian Interference-Causing Equipment Standard ICES-003 for digital apparatus. These limits are designed to provide reasonable protection against harmful interference in a r esidential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in strict accordance with the instructions, m ay cause harmful interference to ra dio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television rece ption, which ca n be determined by turning the equipmen t off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the s

eparation between equipment and the rece iver.

• Connect the equipment into an outlet on a circuit different from th at to which the receiver is connected.

• Consult the d

ealer or an experienced radio/TV technician for help.

Fujitsu is not responsible for any radio or tel evision interference caused by unauthorized modiﬁcations of this equipment or the substitution or attachment of connecting cables and equipment other than those speciﬁed by Fujitsu. The c orre ction of interferences caused by such unauthorized modiﬁcation, substitution or attachment will be the responsibility of the user.

The use of shielded I/O cables is required when connecting this equipment to any and all optional peripheral or host devices. Failure to do so may violate FCC and ICES rules.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

The transmitters in this device must not be co-located or op erated in conjunction with any other antenna or transmitter.

To prevent radio interference to t he licensed service, this device is intended to be operated indoors and aw ay from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.

Users are not authorized to modify this product. Any modiﬁcations invalidate the w arranty.

This equipment may not be modiﬁed, altered, or chan ged in any way without signed written permission from Fujitsu. Unauthorized modiﬁcation will void the equipment authorization from the FCC and Industry Canada and the warranty.

10 Fujitsu

Ports and operating elements

Ports

This chapter presents the individual hardware components of your device. This will provide you with an overview of the ports and operating elements on the device. Please familiarise yourself with these components before starting to work with your device.

Front

567

1=USBports 2 = Headphone port 3 = Microphone port 4=3

/2inch module bay

5 = ON/OFF switch 6 = Optical drive (optional) 7 = Insert/eject button (CD/DVD)

Fujitsu 11

Ports a nd operating elements

Rear

1 = Slot covers 2 = Alternating volt

age socket (AC IN)

12 Fujitsu

Getting started

Gettingstarted

Please observe the safety information in the "Important notes", Page 7 chapter.

Unpacking and checking the delivery

It is recommended not to throw away the original packaging material! It may be required for reshipment at some later date.

PackagingContentso fdeliveryPackaging,

► Unpack all the individual parts. ► Check the contents of the package for any visible damage caused during transport. ► Check whether the delivery conforms to the details in the delivery note. ► Should you discover that the delivery does not correspond to the delivery

note, notify your local sales outlet immediately.

Steps for initial setup

Preparingforﬁrstuse, overviewPreparingforuse,

Only a few steps are necessary to put you r new device into operation for the ﬁrst time:

• Select a location for device and set up device

• Connect external devices such as mouse, keyboard and monitor

• Check the voltage at the mains outlet and connect the device to an elect rical outlet

• Switch the device on You will learn more about the individual steps in the following sections.

External devices

If you have received other external devices in ad dition to your own device (e.g. a printer), do not connect these until after the initial installation. The following sections describe how to connect these external devices.

Drives and boards

If you have received drives or boards with your device, please do not install them until after ﬁrst-time setup. How to install drives and boards is described in the "

System expansions", Page 31 chapter.

Fujitsu 13

Getting started

Setting up the device

VideoworkstationErgonomicD evice,

You can set up and operate the device in either a vert ical or horizontal position.

When installing your device, please read the recommendations and safety notes in the "Safety" manual.

Use the device simply in the horizontal operating position. With the aid of suitable feet, it is also possible to use the device in the vertical operating position..

We recommend that you place your device on a surface with good anti-slip qualities. In view of the multitude of different ﬁnishes and varnishes used on furniture, it is possible that the rubber feet will mark the surface they stand on.

Depending on the location of your device, bothersome vibrations and noises may occur. To prevent this, a distance of at least 10 mm / 0.39 inch should be maintained from other devices on casing sides w ithout ventilation surfaces.

To ensure the casing receives adequate ventilation, when setting up the device make sure that there is sufﬁcient clearance around it as indicated in the chapter "

Technical speciﬁcation", Page 55.

In order to avoid overheating, do not cover the ventilation areas of the monitor or the device.

Do not stack several devices on top of each other.

A minimum distance of 200 mm / 7.87 inch from the device must be observed for ventilation areas.

Do not expose the device to extreme ambient conditions (see "

Technical speciﬁcation",

Page 55, "Ambient conditions"). Protect the device against dust, humidity and heat.

14 Fujitsu

Getting started

Vertical operating position (optional)

The set-up direction is compulsory: The ON/OFF switch must be at the top to ensure sufﬁcient ventilation.

Connecting the device to the mains supply

Mainsadapte

► Connect the power cable to the device (1). ► Plug the power plug into a grounded mains outlet (2). ► Switch the device on with the main switch at the rear (3).

Fujitsu 15

+ 43 hidden pages

Fujitsu ESPRIMO E4xx, ESPRIMO E5xx, ESPRIMO E4 Series, ESPRIMO E5 Series, ESPRIMO E410 Operating Manual

Specifications and Main Features

Frequently Asked Questions

User Manual