System
Operating Manual
FUJITSU Desktop
ESPRIMO D5xx / D7xx / D9xx
Thank you for buying an inno
vative product from Fujitsu.
Latest information abo
ut our products, useful tips, updates etc. is available
on our website: "
http:
//www.fujitsu.com/fts/"
You can find driver upda
tes at: "
http://support.ts.fujitsu.com/download"
Should you have any te
chnical questions, please contact:
• our Hotline/Service
Desk (see Service Desk list or from the Internet at:
"
http://support.t
s.fujitsu.com/contact/servicedesk")
• Your sales partner
• Your sales office
We hope you enjoy using your new Fujitsu system!
Published by / Contact address in the EU
Fujitsu Te
chnology Solutions GmbH
Mies-van-der-Rohe-Straße 8
80807 Munich, Germany
"
http://
www.fujitsu.com/fts/"
Copyright
©Fujits
u Technology Solutions GmbH 2015. All rights reserved.
Publication Date
09/2015
Order No.: A26361-K1186-Z320-1-7619, edition 1
FUJITSU Desktop
ESPRIMO D5xx / D7xx / D9xx
Operating Manual
Your ESPR IMO 7
Ports and operating elements 9
Important notes 11
Getting started 15
Operation 24
Problem solutions and tips 30
System expansions 34
Technical specification 76
Index 77
Remarks
Information on the product description meets the design specifications of Fujitsu and
is provided for comparison purposes. Several factors may cause the actual results to
differ. Technical data is subject to change without prior notification. Fujitsu rejects any
responsibility with regard to technical or editorial mistakes or omissions.
Trademarks
Fujitsu, the Fujitsu logo and ESPRIMO are registered trademarks of Fujitsu Limited or its
subsidiaries in the United States of America and other countries.
Kensington, MicroSaver and K-Slot are registered trademarks of ACCO Brands.
Microsoft and Windows are trademarks or registered trademarks of the Microsoft
Corporation in the United Sta tes and/or other countries.
All other trademarks specified here are the property of their respective owners.
Copyright
No part of this publication may be copied, reproduced or translated without
the prior written consent of Fujitsu.
No part of this publication may be saved or transferred by any electronic means
without the written approval of Fujitsu.
Contents
Contents
YourESPRIMO ......................................................................... 7
Validityof the ReferenceManual ......................................................... 7
Notational conventions .................................................................. 8
Ports and operating elemen
ts .........................................................
9
Front ................................................................................... 9
Rear ................................................................................... 10
Importantnotes ........................................................................ 11
Safetyinformation ....................................................................... 11
Transporting thedevice .................................................................. 11
Cleaning the device ..................................................................... 12
Energy saving, disposaland recycling .................................................... 12
CEmarking ............................................................................ 13
FCCCompliance Statement ............................................................. 14
FCCClass B Compliance Statement .................................................. 14
FCCRadiation ExposureStatement .................................................. 14
Gettingstarted ......................................................................... 15
Unpacking and che
ckingthe delivery .....................................................
15
Steps for initia
lsetup ....................................................................
15
Setting up the de
vice ....................................................................
16
Vertical opera
tingposition with feet (optional) ..........................................
16
Connecting th
edevice to the mains supply ................................................
18
Connecting ex
ternaldevices .............................................................
19
Ports on the de
vice ..................................................................
19
Connecting a
monitor ................................................................
20
Connecting t
hemouse ...............................................................
20
Connecting t
he keyboard . ...........................................................
21
Connecting
externaldevices to theserial interface .....................................
21
Connecting
externaldevices to theUSB ports .........................................
22
Switching
on for the first time: installingthe software .......................................
22
Switch on t
hemonitor and themachine ...............................................
23
Installi
ngthesoftware ...............................................................
23
Operation .............................................................................. 24
Switchthe device on .................................................................... 24
Switching offthe device ................................................................. 24
Procedure in an emergency . . . ....................................................... 24
Indicatorson the device ................................................................. 25
Keyboard ............................................................................... 26
Important keys and keyboard shortcuts . . . . ............................................ 26
Settingsin BIOS Setup .................................................................. 27
Property and data protection . . ........................................................... 28
Mechanically protecting and locking the casing ........................................ 28
BIOSsetup security functions ........................................................ 29
Accessauthorisation viaSmartCard .................................................. 29
Operating the SmartCard reader (optional) ............................................ 29
Pro
blemsolutionsand tips ............................................................
30
Hel
pifproblems occur ...................................................................
30
Tr
oubleshooting . . . ......................................................................
30
Fujitsu 3
Contents
Power-on indicator remainsunlit after youhave switched onyour device ................. 30
The device cannot be switched off with the ON/OFF switch. . . .......................... 31
Monitorremains blank ............................................................... 31
Nomouse pointer displayed on the screen ............................................ 32
Time and/or date is not correct . . . . . . ................................................. 32
SmartCard reader is not recognised. . ................................................. 32
SmartCard PIN forgotten ............................................................. 33
Errormessages on the screen ........................................................ 33
Installingnew software .................................................................. 33
Restoring the hard diskcontents ......................................................... 33
Tips .................................................................................... 33
Systemexpansions .................................................................... 34
Information about boards ................................................................ 35
Removing the casing cover .............................................................. 36
Reattaching the casing cover. ............................................................ 37
Overview of drive baysand drives inyour device .......................................... 38
Changing the drive cover ................................................................ 39
Installing and removing an accessible slimline drive in the upper bay (optional) . . . ........... 42
Installingthe drive platefor the slimline drive .......................................... 42
Installinga slimline drive ............................................................. 44
Removing a slimline drive ............................................................ 45
Opening and closing the drive cage . . . . . ................................................. 47
Opening the drive cage . . ............................................................ 47
Closingthe drive cage ............................................................... 48
Installingand removing 2½ inch drives ina 3½ inchadapter ................................ 49
Installing 2½ inch drives in a 3½ inch adapter . ......................................... 49
Removing 2 ½ inch drives from a 3½ inch adapter . . . . .................................. 51
Installingand removing drives in the lowerbay (optional) ................................... 52
Installing and removing a 3½ inch drive or a 3½ inch adapter . .......................... 52
Installing and removing a 2½ inch drive (screw fastened) .............................. 55
Installing and removing drives in the middle bay ( optional) .................................. 57
Installinga 3½ inchdrive ............................................................. 57
Removing a 3½ inchdrive ........................................................... 59
Installing and removing an M.2 module . . ................................................. 60
Installing an M.2 module . ............................................................ 60
Removing an M.2 module ............................................................ 61
Installing and removing low-profileboards ................................................. 62
Opening th e board retaining mechanism . ............................................. 62
Removing a slot cover. .............................................................. 63
Installing a board . . . . ................................................................ 64
Removing boards ................................................................... 64
Reinstallinga slot cover .............................................................. 65
Closingthe board retainingmechanism ............................................... 66
Installing and removing WLAN antennas . ................................................. 67
Installing WLAN antennas ............................................................ 67
Removing WLAN antennas . . ........................................................ 68
Installinga serial port ................................................................... 69
Installing and removing heat sinks ........................................................ 71
Removing the heat sink . . ............................................................ 71
Installing the heat sink . . . ............................................................ 73
Mainboard expansions . . ................................................................ 74
Upgrading main memory ............................................................. 74
4 Fujitsu
Contents
Processor, replacing ................................................................. 74
Replacingthe lithium battery ......................................................... 75
Technical specification ................................................................. 76
Index .................................................................................. 77
Fujitsu 5
Contents
6 Fujitsu
Your ESPRIMO
Your ESPRIMO
Overview
... is available with various configuration levels which differ in terms of hardware and software
equipment. You can install additional drives (for exam ple a DVD drive) and other boards.
This manual tells you how to start using your device and how to operate it in daily use.
This manual applies for all c onfiguration levels. Depending on the cho sen configuration
level, some of the hardware components described may not be ava ilable on your PC.
Please also read the notes about your operating system.
Depending on the configuration selected, the operating system is preinstalled
on your hard disk (e.g. Windows).
Further information on this device is provided:
• in the "Quick Start Guide" poster
• in the "Safety/regul
ations" manual
• in the "Warranty" manual
• in the "BIOS Setup"
manual
• in the op erating manual for the monitor
• in the manual for t
he mainboard
• in your operating system documentation
• in the informati
on files (e.g. *.PDF, *.HT ML, *.DOC, *.CH M, *.TXT, *.HLP)
ValidityoftheReferenceManual
This Reference Manual is valid for the following systems:
• FUJITSU Desktop ESPRIMO D556
• FUJITSU Des
ktop ESPRIMO D756
• FUJITSU Desktop ESPRIMO D956, D956 LL
Fujitsu 7
Your ESPRIMO
Notational conventions
Pay particular attention to text marked with this symbol. Failure to observe
these warnings could pose a risk to health, damage the device or lead
to loss of data. The warranty will be invalidated if the device becomes
defective through failure to observe these warnings.
Indicates important informa
tion for the proper use of the device .
►
Indicates an activity t hat must be performed
Indicates a result
This font
indicates data e ntered
using the keyboard in a program dialogue or at
the command line, e.g.
your password (Name123) or a command used to
start a program (star
t.exe)
This font
indicates information that is displayed on the screen by a program, e.g.:
Installation is complete.
This font
indicates
• terms and texts used in a software interface, e.g.: Click on Save
• names of programs or files, e.g. Windows or setup.exe.
"This font"
indicates
• cross-references to another section, e.g. "Safety information"
• cross-references to an external source, e.g. a web address: For more
information, go to "
http://www.fujitsu.com/fts"
• Names of CD s, DVDs and titles or designations for other materials,
e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual
Key
indicates a key on the keyboard, e.g:
F10
This font
indicates terms a nd texts that are emphasised or highlighted, e.g.: Do
not switch off th e device
8 Fujitsu
Ports and operating elements
Ports and operating elements
Ports
This chapter presents the individual hardware components of your device. This will provide
you with an overview of the ports and operating elements on the device. Please familiarise
yourself with these components before starting to work with your device.
Front
The device is available i
n 3 device variants:
• device variant with bay
s for a slimline drive and a 3½ inch drive
• device variant with bay for a slimline drive
• device variant with bl
anking plate
In the illustration
s in the following chapter, the maximum configuration level is always
shown, that is the de
vicevariantwithaslimlinedriveanda3½inchdrive.Anydeviations
between the indivi
dual device variants are separately indicated in the particular chapters.
Device variant with bays for a slimline drive and a 3½ inch drive (maximum config urat ion leve l)
ESPRIMO
12
1 2 3 4 5 6
11 8 7910
1 = Headph
one port
2 = Bay for slimline drive
3 = Sliml
ine drive status indicator
4 = Slimline drive insert/eject button
5 = Slim
line drive emergency removal
6 = 3½ inch drive status indicator, e.g.
SmartCard reader
7=ON/
OFF switch with power indicator
8=Harddi
sk indicator
9 = Card slot on 3½ inch drive, e.g.
SmartCard reader
10 = Bay fo
r 3½ inch drive, e.g. SmartCard
reade
r (external), hard disk (internal)
11 = USB ports
12 = Micr
ophone port
Fujitsu 9
Ports a nd operating elements
Rear
1 82 3 4
5 6
7
14 13 3 11 12 11 910
1 = Monitor s ocket (op
tional)
2 = Eye for lead-seal or padlock
(diameter 6 mm)
3 = Serial port (op
tional, abo ve: 2nd optional)
4=4slotsforlow-profile boards or port
expansions (VGA, parallel port, eSATA)
5 = LAN port
6 = PS/2 mouse port
7 = Audio input (
Line In), light blue
8 = Security lock devi
ce
9 = Audio output (Line Out), light green
10 = PS/2 keyboard por
t
11 = USB ports
12 = Display ports (
above: 2nd optional)
13 = DVI-D monitor port
14 = Alternating v
oltage socket (AC IN)
10 Fujitsu
Important notes
Important notes
ImportantnotesNotes
In this chapter you will find information regarding safety which it is essential to
take note of when working with your device.
Safety information
SafetyinformationNote
Please note the informat
ion provided in the "Safety/regulations" manual
and in the following safe
ty notes.
When installing and ope
rating the device, please observe the notes on
environmental conditi
ons in Chapter "
Technical specification" , Page 76 as well
as the instructions in C
hapter "
Getting started", Page 15.
When setting up the dev
ice, make sure there is clearance all around it so that
thecasingreceives
enough ventilation. In order to avoid overheating, do not
cover the ventilati
on areas of the monitor or the device.
You must only opera
te the device if the rated voltage used by the
device is set to the
local mains voltage.
TheON/OFFswitchd
oes not disconnect the device from the mains
voltage. You must
remove the m ains plug from the mains socket to
completely disco
nnect from the mains voltage.
Operate the dev
ice only with the casing closed.
Replace the lit
hium battery on the mainboard in accordance with the instructions
in "
Replacing t
he lithium battery", Page 75.
Caution, comp
onents in the system can get very hot.
The activiti
es described in these instructions must always be
performed wi
th the greatest care.
Repairs to th
e device must only be performed by qualified technicians.
Incorrect r
epairs could put the user at great risk or cause serious damage
to the equ i
pment (electric shock, risk of fire).
Transpor
ting the device
Device,Transpo
rtation
Retrans
portation
Transport all parts separately in their original packaging or in a packaging which
protects them from knocks and jolts, to the new site.
Do not unpack them until all transportation manoeuvres are completed.
If the device is broug ht from a cold environment into the room where it will be used,
condensation may occur. Before operating the device, wait until it is absolutely dry
and has reached approximately the same temperature as the installation site.
Fujitsu 11
Important notes
Cleaning the device
Device,Transporta tionRetransportationSystemunit,seeDevice
Turn off all power and equipment switches and disconnect the power
plug from the mains outlet.
Do not clean any interior parts yourse lf, leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrode
plastic (alcohol, thinner or acetone).
Never clean the device with water! Water entering into th e device could
present a serious risk to users (e.g. electric shock).
Ensure that no liquid enters the system .
The surface can be clea
ned with a dry cloth. If particularly dirty, use a cloth that has been
moistened in mild dome
stic detergent and then carefully wrung out.
Use disinfectant wi
pes to clean the keyboard and the mouse.
Energy saving, disposal and recycling
DisposalEnergysavingRecyclingDrivers&UtilitiesDVDUserDocumentationDVD
You c a n findinformationonthesesubjectsinthe"Environment and Energy Information" manual
or on our website ("
http://www.fujitsu.com/fts/about/fts/environment-care/").
12 Fujitsu
Important notes
CE marking
CEmarkingCEmarkingNotesElectromagneticcompatibilityLowvoltagedirective
The shipped version of this device complies with the requirements of EU directives 2004/108/EC
"Electromagnetic compatibility", 2006/95/EC "Low voltage directive", 2011/65/EC "RoHS directive"
and 2009/125/EC "ecodesign directive".
CE marking for devices with radio component
This equipment complies with the requirements of Directive 1999/5/EC of the European Parliament
and Commission from 9 March, 1999 governing Radio and Telecommunications Equipment
and mutual recognition of conformity.
CE nnnn (!) ; nnnn: For digits and exclamation mark (!), see label on the product.
You c a n find more information and declarations of c onfo rmity on the Internet at:
"
http://globalsp. ts.fujitsu.com/sites/certificates".
This equipment can be used in the following countries:
Belgium Bulgaria Denmark
Germany
Estonia Finland France
Greece
UK Ireland Iceland Italy
Croatia
Latvia Liechtenstein Lithuania
Luxembourg Malta Netherlands Norway
Austria Poland Portugal Ruma nia
Sweden Switzerland Slovakia Slovenia
Spain
Turkey
Czech Republic
Hungary
Cyprus
Contact th
e corresponding government office in the respective country fo r curre nt information on
possible o
perating restrictions. If your country is not included in the l ist, then please contact
the corres
ponding supervisory authority as to whether the use of this product is permitted in
your coun
try.
Fujitsu 13
Important notes
FCC Compliance Statement
If the device complies with the FCC regulations, the F CC sign can be found on the type rating plate.
FCC Class B Compliance S tate
ment
DOC (INDUSTRY CANADA) NOTICES
Notice to Users of Radios and Television :
This class B digital apparatus complies with Canadian ICES-003.
The following statement applies to the products covered in this manual, unless otherwise specified
herein. The statement for other products will appear in the accompanying documentation.
NOTE:
This equipment has been tested and found to comply with the limits for a "Class B" digital
device, pursuant to Part 15 of the FCC rules and meets all requirements of the Canadian
Interference-Causing Equipment Standard ICES-003 for digital apparatus. These limits are
designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in strict accordance with the instructions, m ay cause harmful interference to ra dio
communications. However, there is no guarantee that interference will n ot occur in a particular
installation. If this equipment does cause harmful interference to radio or television rece ption,
which ca n be determined by turning the equipmen t off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the s
eparation between equipment and the rece iver.
• Connect the equipment into an outlet on a circuit different from th at to
which the receiver is connected.
• Consult the d
ealer or an experienced radio/TV technician for help.
Fujitsu not responsible for any radio or television interference c aused by unauthorized modifications
of this equipment or the substitution or attachment of connecting cables and equipment other
than those specified by Fujitsu. The correction of interferences caused by such unauthorized
modification, substitution or attachment will be the responsibility of the user.
The use of shielded I/O cables is required when connecting this equipment to any and all optional
peripheral or host devices. Failure to do so may violate FCC and ICES rules.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
The transmitters in this device must not be co-located or op erated in conjunction
with any other antenna or transmitter.
To prevent radio interference to t he licensed service, this device is intended to be
operated indoors and aw ay from windows to provide maximum shielding. Equipment (or
its transmit antenna) that is installed outdoors is subject to licensing.
Users are not authorized to modify this product. Any modifications invalidate the w arranty.
This equipment may not be modified, altered, or chan ged in any way without signed
written permission from Fujitsu. Unauthorized modification will void the equipment
authorization from the FCC and Industry Canada and the warranty.
14 Fujitsu
Getting started
Getting started
Gettingstarted
Please observe the safety information in the "Important notes", Page 11 chapter.
Unpacking and checking the delivery
It is recommended not to throw away the original packaging material! It may be
required for reshipment at some later date.
PackagingContentso fdeliveryPackaging,
► Unpack all the individual parts.
► Check the contents of the package for a ny visible damage caused during transport.
► Check whether the delivery conforms to the details in the delivery note.
► Should you discover that the delivery does not correspond to the delivery
note, notify your local sales outlet immediately.
Steps for initial setup
Preparingforfirstuse, overviewPreparingforuse,
Only a few steps are necessary to put you r new device into operation for the first time:
• Select a location for device and set up device
• Connect external devices such as mouse, keyboard and monitor
• Check the voltage at the mains outlet and connect the device to an elect rical outlet
• Switch the device on
You will learn more about the individual steps in the following sections.
External devices
If you have received other external devices in ad dition to your own device (e.g.
a printer), do not connect these until after the initial installation. The following
sections describe how to connect these external devices.
Drives and boards
If you have received drives or boards with your device, please do not install
them until after first-time setup. How to install drives and boards is described
in the "
System expansions", Page 34 chapter.
Fujitsu 15
Getting started
Setting up the device
VideoworkstationErgonomicDevice ,
When setting up you r device, please read the recommendations and
safety note s in the "Safety/regulations" manual.
We recommend that you place your device on a surface with good anti-slip qualities.
In view of the multitude of different finishes and varnishes used on furniture, it is
possible that the rubber feet will mark the surface they stand on.
Depending on the location of your device, bothersome vibrations and noises may
occur. To prevent this, a distance of at least 10 m m / 0.39 in should be maintained
from other devices on casing sides w ithout ventilation surfaces.
In order to avoid overheating, do not cover the ventilation areas
on the monitor or the device.
A minimum distance of 200 mm / 7.87 in from the device must be
observed for ventilation areas.
Do not stack several devices on top of each other.
Do not expose the device to extre me ambient conditions (see "
Technical specification",
Page 76, "Ambient conditions"). Protect the device against dust, humidity and heat.
Operating positi
on
You can use the de
vice in a vertical or horizontal operating position.
With the aid of s
uitable feet, it is possible to use the device in a vertical operating position
(see "
Vertical
operating position with feet (optional)", Page 16).
Vertical operating po sition with feet (optional)
Use the optional feet when you wish to use the device in the vertical operating position.
The set-up direction is compulsory: The ON/OFF switch must be at
the top to ensure sufficient ventilation.
You must remove the feet again to be able to open the device.
VerticaloperatingpositionOperatingposition,verticalBasefeetSidecover
Proceed as follow s to operate the device in the vertical operating position with the feet:
► If necessary, disconnect the cables connected to the device.
16 Fujitsu
Getting started
3
2
1
4
5
6
6
3
3
4
► Place the device on the right side as shown.
The screw holes (6)
and guide openings (4) for securing the feet on the
left side of the dev
ice point u p wards.
► Place the feet (3) o n the left side of the device s o that the pins (2) enter into the corresponding
guide openings (4) on the d evice and the screws rest against the screw holes (6).
► Tighten the scr
ews to secure the feet.
► Stand
the device on the feet as sho w n.
Fujitsu 17
Getting started
Connecting the device to the mains supply
Mainsadapter
Use the following table to check which mains plug applies for your country. The
following illustration may be different from your country variant.
2
1
► Connect the pow
er cable to the device (1).
► Plug the power plug into a grounded mains outlet (2).
Power connection
Country
USA, Canada, Mexico, parts of South America,
Japan, Korea, the Philippines, Taiwan
Russia and the Commonwealth of Independent
States (CIS), large parts of Europe, parts of
South America, the Middle East, parts of Africa,
Hong Kong, Ind ia, large parts of South Asia.
UK, Ireland, Malaysia, Singapore, part s of Africa
China, Australia, New Zealand
18 Fujitsu
Getting started
Connecting external devices
Read the documentation on the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before connecting external devices!
Do not connect or disconnect cables during a thunderstorm.
Always take hold of the actual plug . Never unplug a cable by pulling the cable itself.
Ports on the device
InterfacesExternaldevices,Device,
The ports are located on the front and back of the device. The ports available o n your
device depend on the configuration level you have selected. The standard port s are
marked with the symbols shown below (or similar). Detailed information on the location
of the ports is provided in the manual for the mainboard.
Headphones, black or light
green
Headphonesport
Audio input (Line In), light blue
AudioinputLineIn
Microphone port, black or pink
Microphoneport
Audio ou tput (Line Out), light green
AudiooutputLineOut
USB 3.0 - Universal Serial
Bus, blue
UniversalSer
ialBus
USB 2.0 - Universal Serial Bus, black
PS/2 mouse port, green
MouseportPS/2mouseport
PS/2 keyboard port, purple
Keyboardport
DVI-D monitor port
DVI-Imonitorport
DP DisplayPort
DisplayPort
VGA monitor port, blue
Monitorport
LAN
LAN port
LANport
Serial port
Serialinterface
Parallel port
Parallelport
Some of the connected devices require special d rivers (see the
documentation for the connected device).
Fujitsu 19
Getting started
Connecting a monitor
► Follow the instructions contained in the monitor manual to prepare the monitor
for operation (e.g. connecting cables).
Monitor
► Connect the data cable of the monitor into the required monitor port of your device.
The monitor connector on the device is only approved for use with monitors th at
have a rated current less than or equal to 1.0 A at 230 V or less than or equal to
2.0 A at 100 V. The values fo r the monitor current consumption can be found in the
technical data for the monitor or in the operating manual for the monitor.
► Depending on the configur
ation level of your d evice, plug the monitor power
cable into th e grounded
mains outlet.
Connecting the mouse
You can connect a USB mouse or a PS/2 mouse to your device.
Mouse,Connecting,
Connecting a USB mouse
► Connect the USB mouse to one of the USB ports on the device.
USBport,USBport
Connecting a PS/2 mouse
The PS/2 mouse is only detected by the device if you connect the mouse when
the device is switched off and then switch the device on again.
► Connect the PS/
2 mouse to the PS/2 mouse port of the device.
PS/2mouse,Connecting,PS/2mouse,
► Switch your device on again.
20 Fujitsu
Getting started
Connecting the keyboard
You can connect a USB keyboard or a PS/2 keyboard to your device.
Keyboard,Connecting,
Connecting a USB keyboard
Use the supplied keyboard cable only.
USBport,Connecting,
► Insert the flat rectangular USB plug of the keyboard cable into one of the device’s USB ports.
USBport
Connecting a PS/2 keyboard
Use the supplied keyboard cable only.
ConnectingaPS/2keybo
ard
Connecting,
The PS/2 keyboard is only detected by the device if you connect the keyboard
when the device is sw itched off and then switch the device on again.
► Switch your device off.
► Plug the round plug of th e keyboard cable into the keyboard port on the device.
Keyboard,
► Switch your device on again.
Connecting external devices to the serial interface
SerialinterfaceSerialinterface,Externaldevices,Devices,
External devices (e.g. a printer or scanner ) can be connected to the serial port.
► Connect the data cable to the external device.
► Connect the data cable to the corresponding serial interface.
For an exact description of how to connect external devices to the corresponding
port, please see the external device documentation.
Port settings
Serialinte
rface,
You can change the port settings (e.g. address, interrupt) in the BIOS Setup.
Device drivers
Devicedrivers,
The devices connected to the serial interface require d rivers. Your operating system
already includes many drivers. If the required drive is missing, install it. The latest
drivers are usually available on the Internet or will be supplied on a data carrier.
Fujitsu 21
Loading...