Fujitsu Microelectronics Europe
User Guide
EMA-MB91460-EVA-BOB
FMEMCU-UG-910083-11
FR60 FAMILY
BREAKOUT BOARD
USER GUIDE
Revision History
EMA-MB91460-EVA-BOB
Chapter
0 Revision History
D
ate
ssue
I
2008-12-15 V1.0 AW, First draft
2009-03-10 V1.1 CEy, Added cover picture
These were the latest revisions of related documents when this user guide revision had been
released:
Schematic: 1.0
PCB: 1.0
This document contains 16 pages.
UG-910083-11 - 2 - © Fujitsu Microelectronics Europe GmbH
EMA-MB91460-EVA-BOB
Chapter
0 Warranty and Disclaimer
Warranty and Disclaimer
To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH restricts
its warranties and its liability for all products delivered free of charge (eg. software include or
header files, application examples, target boards, evaluation boards, engineering samples of IC’s
etc.), its performance and any consequential damages, on the use of the Product in accordance with
(i) the terms of the License Agreement and the Sale and Purchase Agreement under which
agreements the Product has been delivered, (ii) the technical descriptions and (iii) all accompanying
written materials. In addition, to the maximum extent permitted by applicable law, Fujitsu
icroelectronics Europe GmbH disclaims all warranties and liabilities for the performance of the
M
Product and any consequential damages in cases of unauthorised decompiling and/or reverse
engineering and/or disassembling. Note, all these products are intended and must only be used
in an evaluation laboratory environment.
1. Fujitsu Microelectronics Europe GmbH warrants that the Product will perform substantially in
accordance with the accompanying written materials for a period of 90 days form the date of
receipt by the customer. Concerning the hardware components of the Product, Fujitsu
Microelectronics Europe GmbH warrants that the Product will be free from defects in material
and workmanship under use and service as specified in the accompanying written materials
for a duration of 1 year from the date of receipt by the customer.
2. Should a Product turn out to be defect, Fujitsu Microelectronics Europe GmbH´s entire liability
and the customer´s exclusive remedy shall be, at Fujitsu Microelectronics Europe GmbH´s
sole discretion, either return of the purchase price and the license fee, or replacement of the
Product or parts thereof, if the Product is returned to Fujitsu Microelectronics Europe GmbH in
original packing and without further defects resulting from the customer´s use or the transport.
However, this warranty is excluded if the defect has resulted from an accident not attributable
to Fujitsu Microelectronics Europe GmbH, or abuse or misapplication attributable to the
customer or any other third party not relating to Fujitsu Microelectronics Europe GmbH.
3. To the maximum extent permitted by applicable law Fujitsu Microelectronics Europe GmbH
disclaims all other warranties, whether expressed or implied, in particular, but not limited to,
warranties of merchantability and fitness for a particular purpose for which the Product is not
designated.
4. To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH´s
and its suppliers´ liability is restricted to intention and gross negligence.
NO LIABILITY FOR CONSEQUENTIAL DAMAGES
To the maximum extent permitted by applicable law, in no event shall Fujitsu
Microelectronics Europe GmbH and its suppliers be liable for any damages whatsoever
(including but without limitation, consequential and/or indirect damages for personal
injury, assets of substantial value, loss of profits, interruption of business operation,
loss of information, or any other monetary or pecuniary loss) arising from the use of
the Product.
Should one of the above stipulations be or become invalid and/or unenforceable, the remaining
stipulations shall stay in full effect
© Fujitsu Microelectronics Europe GmbH - 3 - UG-910083-11
EMA-MB91460-EVA-BOB
Chapter
0 Contents
Contents
REVISION HISTORY............................................................................................................ 2
WARRANTY AND DISCLAIMER ......................................................................................... 3
CONTENTS .......................................................................................................................... 4
1 INTRODUCTION.............................................................................................................. 5
1.1 Abstract................................................................................................................... 5
1.2 General Description................................................................................................. 5
2 INSTALLATION ............................................................................................................... 6
3 LOCATION OF PARTS.................................................................................................... 7
4 OPERATION.................................................................................................................... 9
4.1 Jumpers and Connectors Overview......................................................................... 9
4.1.1 Jumper Overview....................................................................................... 9
4.1.2 Connector Overview ................................................................................ 10
4.2 CLK_EXT Clock Source Selection......................................................................... 11
5 MECHANICAL DIMENSIONS........................................................................................ 12
6 INFORMATION IN THE WWW....................................................................................... 13
7 CHINA-ROHS REGULATION ........................................................................................ 14
8 RECYCLING .................................................................................................................. 16
UG-910083-11 - 4 - © Fujitsu Microelectronics Europe GmbH
EMA-MB91460-EVA-BOB
Chapter
1 Introduction
1 Introduction
1.1 Abstract
The EMA-MB91460-EVA-BOB in combination with the EMA-MB91V460A-002B-80/-003 or
the EMA-MB91FV460B-001 board is a development system for Fujitsu FR60 MB91V460A /
MB91FV460B based flash microcontrollers.
The development system allows the designer immediately to start with the software
development before MB91V460A / MB91FV460B based silicon samples are available.
This board must only be used for test applications
in an evaluation laboratory environment.
Before using the EMA-MB91460-EVA-BOB breakout board, make sure that the following
packed components have been delivered:
o 1 pcs. EMA-MB91460-EVA-BOB breakout board
o 8 pcs. Spacer M2,5 x 12
o 8 pcs. Washer M2,5
o 8 pcs. Nuts M2,5
o 1 pcs. User Guide
1.2 General Description
The EMA-MB91460-EVA-BOB breakout board enables access to all signals of the EMAMB91V460A-002B-80/-003 and the EMA-MB91FV460B-001 board.
For further details of the EMA-MB91V460A-002B-80/-003 board please refer to the User
Guide of the EMA-MB91V460A-002B-80/-003.
For further details of the EMA-MB91FV460B-001 board please refer to the User Guide of the
EMA-MB91FV460B-001.
The layout of the connectors J100 to J112 enables the direct connection of a LA1034
LOGICPORT logic analyzer (http://www.pctestinstruments.com/
cable.
The MB91V460A / MB91FV460B clock signals (MONCLK, SYSCLK and MCLKO) are
distributed via a low skew clock fanout buffer.
The EMA-MB91460-EVA-BOB breakout board provides several prototype areas with
1.27mm and 2.54mm grid.
© Fujitsu Microelectronics Europe GmbH - 5 - UG-910083-11
) via a 40pol flat ribbon
EMA-MB91460-EVA-BOB
Chapter
2 Installation
2 Installation
Remove carefully the EMA-MB91460-EVA-BOB breakout board from the shipping carton
and check if there are any damages.
Please refer to the User Guide of the EMA-MB91FV460B-001 for a description of the
assembling and disassembling process of the EMA system stack.
If the system is used as a stand-alone system without socket adapter board and target
board, the attached spacer should be installed.
Figure 2-1: Installation
UG-910083-11 - 6 - © Fujitsu Microelectronics Europe GmbH
3 Location of Parts
Prototype area 2.54mm
EMA-MB91460-EVA-BOB
Chapter
3 Location of Parts
area
2.54mm
Prototype
Figure 3-1: Location of parts (top layer)
© Fujitsu Microelectronics Europe GmbH - 7 - UG-910083-11
EMA-MB91460-EVA-BOB
Chapter
3 Location of Parts
J800B
R226
R225
R227
R229
R231
R230
J810B
R228
R223
J802B
J803B
R224
J801B
Figure
UG-910083-11 - 8 - © Fujitsu Microelectronics Europe GmbH
3-2: Location of parts (bottom layer)
EMA-MB91460-EVA-BOB
Chapter
4 Operation
4 Operation
The default setting is shown with a grey shaded area.
4.1 Jumpers and Connectors Overview
This chapter describes all jumpers and connectors that can be modified or accessed on the
EMA-MB91460-EVA-BOB breakout board.
4.1.1 Jumper Overview
Please refer to the attached schematic for detailed jumper layout information.
Jumper Description / Function Type Default
R223 0R 0603 Open
R224
R225 APIX_SDINP -> J113 0R 0603 Open
R226 APIX_SDINM -> J113 0R 0603 Open
R227 APIX_SDOUTP -> J113 0R 0603 Open
R228 APIX_SDOUTM -> J113 0R 0603 Open
R229 USB_UDM -> J113 0R 0603 Open
R230 USB_UDP -> J113 0R 0603 Open
R231 USB_HCON# -> J113 0R 0603 Open
Clock source select
0R 0603 Closed
© Fujitsu Microelectronics Europe GmbH - 9 - UG-910083-11
EMA-MB91460-EVA-BOB
Chapter
4 Operation
4.1.2 Connector Overview
Please refer to the attached schematic for detailed connector layout information.
Connector Description / Function Type
J100 P00, P01, P02, P03 Header 20x2
J101 P04, P05, P06, P07 Header 20x2
J102 P08, P09, P10, P11 Header 20x2
J103 P12, P13, P14, P15 Header 20x2
J104 P16, P17, P18, P19 Header 20x2
J105 P20, P21, P22, P23 Header 20x2
J106 P24, P25, P26, P27 Header 20x2
J107 P28, P29, P30, P31 Header 20x2
J108 P32, P33, P34, P35 Header 20x2
J109 P36, P37, P38, P39 Header 20x2
J110 P40, diverse signals Header 20x2
J111 DSU4 signals Header 20x2
J112 DSU4 signals Header 20x2
J113 Power, APIX , USB Header 20x2
J116 GND Header 3 pol
J117 GND Header 3 pol
J118 APIX Header 4x2
J119 USB Header 3x2
UG-910083-11 - 10 - © Fujitsu Microelectronics Europe GmbH
EMA-MB91460-EVA-BOB
Chapter
4 Operation
4.2 CLK_EXT Clock Source Selection
The CLK_EXT clock signals on the connectors J100 to J110 (pin 40) can be sourced either
by SYSCLK (P10_0) or by MCLKO (P10_4).
R223 R224 Description
Open Open Not allowed
Open Closed SYSCLK
Closed Open MCLKO
Closed Closed Not allowed
Default: R223: open, R224: closed
© Fujitsu Microelectronics Europe GmbH - 11 - UG-910083-11
EMA-MB91460-EVA-BOB
Chapter
5 Mechanical dimensions
5 Mechanical dimensions
Figure 5-1: Mechanical Dimensions
UG-910083-11 - 12 - © Fujitsu Microelectronics Europe GmbH
EMA-MB91460-EVA-BOB
Chapter
6 Information in the WWW
6 Information in the WWW
Information about FUJITSU MICROELECTRONICS Products
can be found on the following Internet pages:
Microcontrollers (8-, 16- and 32bit), Graphics Controllers
Datasheets and Hardware Manuals, Support Tools (Hard- and Software)
http://mcu.emea.fujitsu.com/
Power Management Products
http://www.fujitsu.com/emea/services/microelectronics/powerman/
Media Products: SAW filters, acoustic resonators and VCOs
http://www.fujitsu.com/emea/services/microelectronics/saw/
For more information about FUJITSU MICROELECTRONICS
http://www.fujitsu.com/emea/services/microelectronics/
© Fujitsu Microelectronics Europe GmbH - 13 - UG-910083-11
EMA-MB91460-EVA-BOB
Chapter
7 China-RoHS regulation
7 China-RoHS regulation
Evaluation Board
Emulation Board
SJ/T11364-2006
根据
《电子信息产品污染控制标识要求》特提供如下有关污染控制方面的信息。
The following product pollution control information is provided according to SJ/T11364-2006
Marking for Control of Pollution caused by Electronic Information Products.
1
．电子信息产品污染控制标志说明
该标志表明本产品含有超过中国标准
《电子信息产品中有毒有害物质的限量要求》中限量的有毒有害物质。标志中的数字为本产品
的环保使用期，表明本产品在正常
用本产品不会对环境造成严重污染或对其人身、财产造成严重损害的期限，单位为年。
评估板
仿真板
Explanation of Pollution Control Label
SJ/T11363-2006
使用的条件下，有毒有害物质不会发生外泄或突变，用户使
为保证所申明的环保使用期限，应按产品手册中所规定的环境条件和方法进行正常使用，并严
格遵守产品维修手册中规定的定期维修和保养要求。
产品中的消耗件和某些零部件可能有其单独的环保使用期限标志，并且其环保使用期限有可能
比整个产品本身的环保使用期限短。应到期按产品维修程序更换那些消耗件和零部件，以保证
所申明的整个产品的环保使用期限。
本产品在使用寿命结束时不可作为普通生活垃圾处理，应被单独收集妥善处理。
请注意：环保使用期限50年的指定不是与产品的耐久力，使用期限或任何担保要求等同的。
This symbol to be added to all EIO sold to China, indicates the product contains hazardous
materials in excess of the limits established by the Chinese standard SJ/T11363-2006
Requirements for Concentration Limits for Certain Hazardous Substances in Electronic
Information Products. The number in the symbol is the Environment-friendly Use Period
(EFUP), which indicates the period, starting from the manufacturing date, during which the
toxic or hazardous substances or elements contained in electronic information products will
not leak or mutate under normal operating conditions so that the use of such electronic
information products will not result in any severe environmental pollution, any bodily injury or
damage to any assets, the unit of the period is “Year”.
UG-910083-11 - 14 - © Fujitsu Microelectronics Europe GmbH
EMA-MB91460-EVA-BOB
Chapter
7 China-RoHS regulation
In order to maintain the declared EFUP, the product shall be operated normally according to
the instructions and environmental conditions as defined in the product manual, and periodic
maintenance schedules specified in Product Maintenance Procedures shall be followed
strictly.
Consumables or certain parts may have their own label with an EFUP value less than the
product. Periodic replacement of those consumables or parts to maintain the declared EFUP
shall be done in accordance with the Product Maintenance Procedures.
This product must not be disposed of as unsorted municipal waste, and must be collected
separately and handled properly after decommissioning.
Please note: The designation of 10 years EFUP is not
duration or any warranty-claims of the product.
产品中有毒有害物质或元素的名称及含量
Table of hazardous substances name and concentration
有毒有害物质或元素
部件名称
Component Name
EMA-MB91460-EVA-BOB
O:
表示该有毒有害物质在该部件所有均质材料中的含量均在
X:
表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
铅
(Pb)
o o o o o o
(Hg)
Hazardous substances name
汞
(Cd)
to be equated with the durability, use-
镉
SJ/T11363-2006
六价铬
(Cr(VI))
标准规定的限量要求以下
SJ/T11363-2006
多溴联苯
(PBB)
多溴二苯醚
标准规定的限量要求
(PBDE)
•
此表所列数据为发布时所能获得的最佳信息
•
由于缺少经济上或技术上合理可行的替代物质或方案，此医疗设备运用以上一些有毒有害物质来实现设备的预期
临床功能，或给人员或环境提供更好的保护效果
。
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous
materials for this part is below the limit requirement in SJ/T11363-2006.
X: Indicates that this toxic or hazardous substance contained in at least one of the
homogeneous materials used for this part is above the limit requirement in SJ/T11363-2006.
• Data listed in the table represents best information available at the time of publication
© Fujitsu Microelectronics Europe GmbH - 15 - UG-910083-11
EMA-MB91460-EVA-BOB
Chapter
8 Recycling
8 Recycling
Gültig für EU-Länder:
Gemäß der Europäischen WEEE-Richtlinie und deren Umsetzung in landesspezifische
Gesetze nehmen wir dieses Gerät wieder zurück.
Zur Entsorgung schicken Sie das Gerät bitte an die folgende Adresse:
Fujitsu Microelectronics Europe GmbH
Warehouse/Disposal
Monzastraße 4a
D-63225 Langen
Valid for European Union Countries:
According to the European WEEE-Directive and its implementation into national laws we
take this device back.
For disposal please send the device to the following address:
Fujitsu Microelectronics Europe GmbH
Warehouse/Disposal
Monzastraße 4a
D-63225 Langen
GERMANY
-- END --
UG-910083-11 - 16 - © Fujitsu Microelectronics Europe GmbH
Loading...