Fujitsu DCU105 3 User Manual

Page 1
Be sure to read this installation manual thoroughly prior to installation and making connections. If installation methods or non-standard parts not specified in this installation manual are used, accidents or injury may result. Professional installation is recommended, contact the place of purchase to schedule an appointment. After reading the owner's manual and the installation manual thoroughly, keep them in a safe place for future reference. To dealers:
Contents
Contents
Components
Before
installation
Installation
Connections
2
For your safety in using the DCU105 3
Names and functions of terminals 5
Installing the decorder unit
9
When measuring frequency response characteristics or carrying out automatic time alignment inside the vehicle
10
5.1ch Decoder/AV Matrix Unit
INSTALLATION MANUAL
MODEL
Speaker connection examples
8
Page 2
-2-
Components
Components
Check that all of the following components are present
Check that all of the following components are present
Decoder unit x 1
Interconnecting cable
(Power and speaker connector)
(16P) x 1
Interconnecting cable
(20P) x 1
Hex-head bolt
(Red:M5x8) x 4
Self-adhesive pad
x 2
Interconnecting cable
(12P) x 1
Side bracket x 2
Microphone for measuing
frequency characteristics
x 1
microphone extension
cable
(4m) x 1
VTR RCA cable
(3.5m)x 1
DIN cable
(13P) x 1
Monophonic RCA cable
(White ) (3.5m) x 1
Video input cable
(Yellow )
(3.5m) x 1
Digital
RCA
cable
(Black ) (3.5m) x 1
1
4
7
2
5
8
3
6
9
10
13
11
14
12
Page 3
-3-
Warnings and caution signs, illustrated bellow, are posted throughout this manual as well as on the DCU105. They show safe and correct ways to handle the product to prevent personal injury to you and others and avoid damage to property. When reading through the manual, take the time to read through and learn the important information listed in this section.
This "WARNING" sign indicates a situation in which incorrect handling may result in death or serious personal injury.
This
"CAUTION"
sign indicates a situation in which incorrect handling may result in
personal injury or may result solely in damage to property.
FFor y
or y
our saf
our saf
ety in using the DCU105
ety in using the DCU105
This section contains information that can help to prevent problems and damage to the unit, and also contain other useful information.
Tip
Never supply power to another electrical appliance by splicing or tapping into this product's power lead (battery supply or constant power wire). Otherwise, the current capacity of the wire will be exceeded, resulting in a fire or electric shock.
Never attempt to disassemble or modify the product. Otherwise, an accident, fire or electric shock may result.
When replacing fuses, be sure to use fuses of the specified capacity (amperage). Otherwise, damage to the unit, fire, or an electric shock may result.
When installing the product into a vehicle with a passenger side air bag, never install or secure the product to the air bag's cover or in places where it may impede air bag deployment. Otherwise, proper air bag operation may not be ensured in the event of an accident, causing injury or death.
When making holes using drill or similar tool, be sure to wear protective eyewear. Otherwise, an injury such as loss of eyesight may result.
Exposed wires must be insulated with electrical tape. Otherwise, a short circuit, fire, or electric shock may result.
Do not modify this system for use other than that specified herein. Also, do not deviate from the installation procedures described herein; Eclipse will not be held liable for damages including, but not limited to serious injury, death or property damage resulting from installations that enable unintended operation.
Do not install this product in locations where it may obstruct the driver's view, or where it may endanger passengers in the vehicle. Otherwise, an accident or injury may result.
Do not install this product in locations where it may interfere with the operation of the steering wheel, shift lever, brake pedal, etc. Otherwise, an accident or injury may result.
To prevent damage to the vehicle, confirm the locations of hoses, electrical wiring, and the fuel tank prior to drilling holes to install this product. Also, take all necessary precautions so that the product does not interfere, nor come in contact with them. Otherwise, a fire may result.
When installing this product, never use the existing nuts or bolts that secure parts of the fuel tank, the steering, or braking systems. Otherwise, improper steering or braking and / or a fire may result.
To prevent a short circuit from occurring, disconnect the battery's negative terminal prior to installing this product. Otherwise, an electric shock or injury may result.
When using an existing nut and/or bolt from the vehicle to ground this product, do not use any that secure parts of the steering or braking systems. Otherwise, an accident may result.
Bundle cables and harnesses with electrical tape or wire ties to prevent them from interfering with moving parts. If they should entangle with the steering wheel, shift lever or brake pedal, an accident may result.
Page 4
-4-
Play the audio at a moderate volume level that permits you to hear sounds from outside the vehicle. Driving with the inability to not hear outside sounds may result in an accident.
This product must be operated only as on-board equipment, or it may cause electrical shock or injury.
Do not play distorted sounds for long periods of time; the speakers may overheat and cause a fire.
Do not cover the ventilation holes or the cooling plate of the product. If the ventilation holes or cooling plate are covered, heat will build up inside the product and fire may result.
Do not clean the cables or cords with volatile chemicals such as alcohol, kerosene, thinner or gasoline. Using such chemicals may cause warping, discoloration or other damage.
For best results, this product should be installed by a professional installer. Contact the dealer whom you purchased the product for an appointment.
When installing this product, be sure to use the supplied mounting hardware. If parts other than those supplied are used, the unit may be damaged internally, or may not be held in place securely and become dislodged.
Avoid installing this product in places where it may get wet, such as near windows, or in places that are moist, damp, or dusty. Presence of liquid, moisture, or dust inside this product can cause short circuiting resulting in smoke and / or fire.
If this product is not connected properly, a short circuit, fire, and / or accident may occur.
When routing cables, use care so that they do not contact sharp metal parts such as brackets or screw tips. Otherwise, a short circuit, electric shock, fire and / or accident may result.
Page 5
-5-
Names and functions of ter
Names and functions of ter
minals
minals
Never cut the insulation on the power cable or use it to power any other equipment. If the rated current capacity of the power cable is exceeded, fire and electric shocks may result.
The cables should be secured with tape or similar securing method so that they will not cause an obstruction while driving. If they get wound or entangled around components such as the steering
wheel, shifting lever, or brake pedal, accidents may result.
Refer to page 6 for details on the wire colors and connection points for interconnecting cables .
Refer to page 6 and 7 for details on connection points through for the main unit cables and terminals.
Tip
A R
1
2
3
4
DECODER UNIT
1
20P
A
5
6
F
G
E
D
C
16P
INTERCONNECTING CABLE
(VTR input/output connector)
2
INTERCONNECTING CABLE
4
B
[ LEFT SIDE ]
[ RIGHT SIDE ]
DECODER UNIT
1
12P
Q
R
(Power and speaker connector)
H
I
(Video input connector)
INTERCONNECTING CABLE
3
J
K
L
M
N
O
P
2
Page 6
B+ (Yellow)
Connect where the power is constantly available, regardless of the ignition key's position.
Ground (Black)
Connect where good body grounding is available.
DVD MUTE wire (Pink)
Connect to H/A MUTE or DVD MUTE on the main unit.
NAVI MUTE wire (Brown)
Connect to NAVI MUTE on the navigation unit.
Front speaker output leads
Connect to the front speakers.
White: Left + White/Black: Left ­Gray: Right + Gray/Black: Right -
Rear speaker output leads
Connect to the rear speakers.
Green: Left + Green/Black: Left ­Purple: Right + Purple/Black: Right -
6
5
4
3
2
1
-6-
Wire colors and connection points for connection cables
Never connect the power supply to the speaker leads (No.5 and No.6), otherwise it will cause damage to the main unit.
E-LAN terminal
Connect to the main unit or to a CD changer (sold separately) if one is being used with the system.
Line-out terminal (Front Mid-Low)
Line-out terminal (Front / Front Mid)
Line-out terminal (Front Hi)
Line-out terminal (Rear)
Connect to the RCA input Connectors of an external amplifier.
White : Left signal Red : Right signal
A
B
C
D
Main unit connectioms
If not using and , insulate them using PVC tape or similar. If they are not insulated, incorrect operation may result.
43
Connect to the RCA input Connectors of an external amplifier.
White : Left signal Red : Right signal
E
*
The speakers to connect will vary depending on whether the speaker layout is •1-way speaker •or
3-way speaker. (Refer to the instruction manual for details on switching the speaker layout.)
If the speaker layout is "1-way speaker": Use the "LINE OUT" (Front/Front/Mid) terminal . Terminals and are not used.
If the speaker layout is "3-way speaker": Connect to the low-range speaker (woofer), connect to the mid-range speaker (squawker), and connect to the high-range speaker (tweeter).
C
B D
B
C
D
Caution
2
Page 7
Center speaker line-out terminal
If using a center speaker (sold separately ), connect it to the RCA input connector of an external amplifier.
Woofer speaker line-out terminal
If using a woofer speaker (sold separately ), connect it here.
VTR input terminals (CH1)
VTR input terminals (CH2)
VTR output terminals (CH1)
VTR output terminals (CH2)
Video input terminal
Connect to the AV output terminal of the main unit.
Yellow : Video signal White : Audio (left) signal Red : Audio (right) signal
NAVI-VOICE input terminal
Connect to the NAVI sound volume output terminal of the main unit.
Video output terminal
Connect to the video input terminal of the main unit.
Digital input terminal
Connect to the digital output terminal of the main unit.
RCA digital input terminal (DIGITAL 1 )
Optical digital input terminal (DIGITAL 2 )
MIC terminal 3.5 mm mini-jack
If measuring frequency response characteristics or carrying out automatic time alignment, connect the accessory measuring microphone here.
-7-
F
G
H
Connect the output cable of external video equipment sach as a VTR.
Yellow : Video signal White : Audio (left) signal Red : Audio (right) signal
I
J
Connect to the monitor's video input.
Yellow : Video signal White : Audio (left) signal Red : Audio (right) signal
K
L
N
O
Connect to digital output terminal of the external unit.
P Q R
M
Page 8
-8-
Speak
Speak
er connection e
er connection e
xamples
xamples
To center speaker (with amplifier)
DECODER UNIT
1
INTERCONNECTING CABLE
2
(Power and speaker connector)
To sub-woofer (with amplifier)
DECODER UNIT
1
INTERCONNECTING CABLE
2
(Power and speaker connector)
To center speaker (with amplifier) or external amplifier
To sub-woofer (with amplifier) or external amplifier
To external anplifier
NO CONNECTION
NO CONNECTION
INTERCONNECTING CABLE
2
(Power and speaker connector)
DECODER UNIT
1
NO CONNECTION
NO CONNECTION
If not connecting an e
If not connecting an e
xter
xter
nal amplifier (sold separ
nal amplifier (sold separ
ately)
ately)
FFor a front 1-w
or a front 1-waa
y speak
y speak
er system
er system
FFor a front 3-w
or a front 3-waa
y speak
y speak
er system
er system
Front speakers
Rear speakers
To center speaker (with amplifier) or external amplifier
To sub-woofer (with amplifier) or external amplifier
To external anplifier
To external anplifier
To external anplifier
To external anplifier
To external anplifier
L
R
L
CENTER
FRONT
R
SWREAR
MidLowMidHi
L
CENTER
R
SWREAR
MidLowMidHi
L
FRONT
R
L
R
L
CENTER
FRONT
R
SWREAR
MidLowMidHi
Page 9
-9-
Installing the decoder unit
Installing the decoder unit
Install the side brackets to the sides of the decoder unit with the supplied screws.
1
Attach the self-adhesive pads to the base of the side brackets.
2
Life up the carpet underneath the vehicle seat and find a suitable mounting location.
3
Decoder unit
1
Make marks on the floor to indicate the bracket mounting location.
4
Remove the side brackets from the decoder unit, and attach the side brackets to the floor at the indicated mounting location.
5
Use a knife to cut slits in the carpet at positions corresponding to the top of the brackets.
6
Hex-head bolt [x4 ]
7
Use a knife to cut slits
SIDE BRACKETS [x 2 ]
5
Install the decoder unit to the side brackets.
7
Self-ahesive pad [x 2 ]
6
Side bracket [x2 ]
5
Decoder unit
1
Hex-head bolt [x4 ]
7
Page 10
-10-
When measur
When measur
ing frequency response char
ing frequency response char
acter
acter
istics or carr
istics or carr
ying out
ying out
automatic time alignment inside the v
automatic time alignment inside the v
ehicle
ehicle
Connect the accessory measuring microphone to the decoder unit.
1
Install the microphone to the headrest of the driver's seat.
WIRE
DRIVER'S SEAT
Front of vehicle
Microphone for measuing frequency characteristics
13
2
Using the supplied velcro strap, secure the microphone to the base of the headrest.
Refer to the owners manual of the main unit for the correct procedures when taking
measurements.
Tip
Page 11
-11-
Page 12
-12-
090003-28580700 0507DE (CN)
“ECLIPSE” is a registered trademark of
FUJITSU TEN LIMITED in 48 countries
including the U.S. and Japan.
Loading...