Fujitsu D3598-G data sheet

Datasheet FUJITSU Mainboard D3598-G ATX
Page 1 of 7
ts.fujitsu.com/mainboards.
FUJITSU Mainboard D3598-G ATX
Extended Lifecycle Series
Powered by the Intel® X299 Workstation chipset (BasinFalls), quad channel DDR4 2666 U-DIMM memory and Intel® Core
TM
High Performance i7 & i9 X-series processors (SKL-X; LGA2066)
Designed & approved for 24/7 continuous operation
Preliminary
Chipset:
Intel® X299 Workstation Chipset
Processors:
Intel® Core i7-78xxX / -98xxX processors Intel® Core i9-79xxX / -98xxX / -99xxX processors Skylake-X processor series, socket R (LGA2066), up to 165W TDP
Memory:
DDR4 2666 SDRAM (U-DIMM, quad channel) (memory speed may depend on installed processor and memory configuration) Up to 128GB memory
Product Features:
Mini-PCIe socket incl. USB 2.0 7 x PCIe generation 3 onboard
5.1 multichannel audio onboard USB 3.1 Gen2, USB 3.1 Gen1 and USB 2.0 USB 3.1 Gen2 Type C Dual Intel GbE LAN incl. Teaming support 8 x Serial ATA III incl. RAID onboard Trusted Platform Modul (Infineon) V2.0 onboard BIOS-POST/-Boot & OS - HW Watchdog onboard M.2 SSD 2280 socket (PCIe, for NVMe modules) Intel® vroc (Virtual RAID on CPU) supported Intel® Optane™ memory supported
Data Sheet
Page 2 of 7
ts.fujitsu.com/mainboards.
Board Size
ATX: 12“ x 9.6“ (305 x 244 mm)
Chipset
Intel® “Basin Falls” X299 Workstation chipset
Memory
8 DIMM Sockets DDR4, max. 128GB, up to 4 channels Single- / dual- rank UDIMM DDR4 2133 / 2400 / 2666, 1.2V, 288-pin, non-ECC
Effective memory speed may depend on installed processor and memory configuration
Processors
Intel® Skylake-X series processors Intel® Core i7-78xxX / -98xxX Processors Intel® Core i9-79xxX / -98xxX / -99xxX Processors
Socket R4 (LGA2066), max. 165W TDP, integrated Memory Controller (For details on supported processors please refer to OEM FTP Server)
Power Specification
24 Pin Power Connector + 8 Pin (12V ) Power Connector required Support for Soft-Off Power Supplies; 12V and 3.3V Supply Voltage on PCIe Slots
3.3V Auxiliary Supply Voltage on PCIe Slots (Wake-Up Function) On board CPU high-efficiency CPU Voltage Regulator, 5V / 2A Auxiliary Power required for USB Wake-Up from Save-to-RAM, Save-to-Disk
Power Supply Requirements
A) Combined load for all 12V Rails. B) Thereof processor peak current up to 32A (<250ms) C) Depends on system configuration (Main focus: 12V/3.3V: PCIe Slots; 5V: Memory/USB)
Note: (further required rails 5V, 3.3V etc. not shown here) +12V rails: Each +12V/GND PSU pin must support up to 10A continuous current for full
system configuration. Single-rail 12V supply instead of three separate 12V rails is possible. See TechNotes document (FTP) for further details.
Source Voltage
Min. PS
Load
Max.Voltage
Tolerance
Mainboard
Capacitive
Load
Mainboard Max.
Current
(continuous)
Main Power
Supply
+ 12 V
CPU
(Rail#2)
0.05A
A)
± 5 %
1.000µF
~45A
B,C)
+ 12 V
CPU
(Rail#3)
1.000µF
+ 12 V
Sys
(Rail#1)
1.000µF
- 12V
0A
--
--
--
+ 5V
0.05A
± 5 %
2.200µF
~ 28A C)
+ 3.3V
0.05A
± 5 %
2.000µF
~ 20A C)
Aux
+ 5Vaux
0A
+5 % / -3%
2.200µF
~ 2A C)
Features and benefits
FUJITSU Mainboard D3598-B ATX
Data Sheet
Page 3 of 7
ts.fujitsu.com/mainboards.
BIOS
AMI Aptio 5.x (UEFI) BIOS modified and adapted by Fujitsu Technology Solutions; Recovery BIOS, SM-BIOS (DMI), BIOS and
CPU Microcode Update, Quick Boot, Logo Boot, Quiet Boot, Plug & Play, Automatic DRAM and PCIe Configuration, BIOS Support for S.M.A.R.T., Advanced Power Management, ACPI S3/S4, Wake on time from S5.
Boot support for M.2 Carrier Board D3352-A (PCIe-based SSD modules, NVME required). BIOS integrated HW Diagnostic Tool
Security Features
Recovery BIOS, System and BIOS Password, Boot Sequence Control, Serial/USB- Port Access Protection, Boot Sector Virus Warning, Write Protection for Flash BIOS, EraseDisk (optional BIOS Feature), Trusted Platform Module TPM V2.0 (Infineon SLB9670)
Audio
Realtek ALC671, 5.1 Multichannel, High Definition Audio
USB 3.1 Gen2
ASMedia ASM1142
LAN Intel i219LM / Intel i210 Ethernet Controller with 10/100/1000 MBit/s
Wake-on-LAN (WoL) by interesting Packets, Link Status Change and Magic Packet™, PXE Support, BIOS MAC Address Display, Teaming Support
Drives
8 x SATA III 600 Interfaces (up to 6GBit/s, NCQ); AHCI; RAID 0/1/10. 1 x M.2 Socket (2280) for PCIe (4 lanes) based M.2 modules (NVME required),
NVME Boot support Support for Intel® Optane™ and Intel® vroc (Virtual RAID on CPU)
Special Features
Silent Fan Independent temperature related processor fan and system fan supervision and control System Guard View and adjust Silent Fan features Recovery BIOS Restores a corrupted BIOS Desk Update Easy driver update with Drivers&Utilities DVD Multi Boot Comfortable boot from any boot device HDD Password Access protection for disk drives 24/7 Operation Mainboard is designed for continuous operation Boot Watchdog Full supervision of BIOS POST and Boot sequence CSA / UL compliance cTÜVus possible upon request FCC compliance FCC-B verified (planned)
Operating Systems
OS “Runnable” “Tested/Released by Fujitsu” MS Windows 7-64 --- MS Windows 10-64 X X 1 Linux-64 X
Graphics
SLI-Certification for Nvidia Quadro cards: tbd
1 Test / Release based on MS Windows 10 RS5
FUJITSU Mainboard D3598-G ATX
Loading...
+ 4 hidden pages