Fujitsu D3598-B data sheet

Datasheet FUJITSU Mainboard D3598-B ATX

Page 1 of 7

ts.fujitsu.com/mainboards.

Data Sheet

FUJITSU Mainboard D3598-B ATX

Extended Lifecycle Series

Powered by the Intel® C422 Workstation chipset (BasinFalls), quad channel DDR4 2666
R-DIMM & LR-DIMM memory and Intel® Xeon® processors (SKL-W; LGA2066)
Designed & approved for 24/7 continuous operation

Chipset:

Intel® C422 Workstation Chipset

Processors:

Intel® Xeon® W-21xx (Skylake-W) Processors
Intel® Omni-Path Architecture 14nm generation
(up to 160W TDP)

Memory:

DDR4 2666 SDRAM (quad channel)
RDIMM & LRDIMM,
(memory type/speed depends on processor)
Up to 512GB memory

Product Features:

Mini-PCIe socket incl. USB
7 x PCIe generation 3 onboard

5.1 multichannel audio onboard
USB 3.1 Gen2, USB 3.1 Gen1 and USB 2.0
USB 3.1 Gen2 Type C
Dual Intel GbE LAN supporting iAMT / vPro & Teaming
8 x Serial ATA III incl. RAID onboard
Trusted Platform Modul (Infineon) V2.0 onboard
BIOS-POST/-Boot & OS - HW Watchdog onboard
M.2 SSD 2260/2280 socket (PCIe, for NVMe modules)
Socket for optional Intel® VROC HW License Key (NVMe SSD RAID)

Data Sheet

Page 2 of 7

ts.fujitsu.com/mainboards.

Board Size

ATX: 12“ x 9.6“ (305 x 244 mm)

Chipset

Intel® “Basin Falls” C422 Workstation chipset

Memory

8 DIMM Sockets DDR4, max. 512GB, up to 4 channels
Single- / dual- rank RDIMM or quad-rank LRDIMM
DDR4 2133 / 2400 / 2666, 1.2V, 288-pin, ECC

Effective memory speed depends on installed processor

Processors

Intel® Xeon® processor W21xx
Socket R4 (LGA2066), max. 160W TDP, integrated Memory Controller
(For details on supported processors please refer to our website)

Power Specification

24 Pin Power Connector + 8 Pin (12V ) Power Connector required
Support for Soft-Off Power Supplies; 12V and 3.3V Supply Voltage on PCIe Slots

3.3V Auxiliary Supply Voltage on PCIe Slots (Wake-Up Function)
On board CPU Voltage Regulator, 5V / 2A Auxiliary Power
required for USB Wake-Up from Save-to-RAM, Save-to-Disk

Power Supply Requirements

A) Combined load for all 12V Rails. B) Thereof processor peak current up to 32A (<250ms)
C) Depends on system configuration (Main focus: 12V/3.3V: PCIe Slots; 5V: Memory/USB)

Note: (further required rails 5V, 3.3V etc. not shown here)
+12V rails: Each +12V/GND PSU pin must support up to 10A continuous current for full

system configuration. Single-rail 12V supply instead of three separate 12V rails is possible.
See TechNotes document (FTP) for further details.

Source Voltage

Min. PS

Load

Max.Voltage

Tolerance

Mainboard

Capacitive

Load

Mainboard Max.

Current

(continuous)

Main Power

Supply

+ 12 V

CPU

(Rail#2)

0.05A

A)

± 5 %

1.000µF

~45A

B,C)

+ 12 V

CPU

(Rail#3)

1.000µF

+ 12 V

Sys

(Rail#1)

1.000µF

- 12V

0A

--

--

--

+ 5V

0.05A

± 5 %

2.200µF

~ 28A C)

+ 3.3V

0.05A

± 5 %

2.000µF

~ 20A C)

Aux

+ 5Vaux

0A

+5 % / -3%

2.200µF

~ 2A C)

Features and benefits

FUJITSU Mainboard D3598-B ATX

Data Sheet

Page 3 of 7

ts.fujitsu.com/mainboards.

BIOS

AMI Aptio 5.x (UEFI) BIOS
modified and adapted by Fujitsu Technology Solutions; Recovery BIOS, SM-BIOS (DMI), BIOS and

CPU Microcode Update, Quick Boot, Logo Boot, Quiet Boot, Plug & Play, Automatic DRAM and
PCIe Configuration, BIOS Support for S.M.A.R.T., Advanced Power Management, ACPI S3/S4,
Wake on time from S5.

Boot support for M.2 Carrier Board D3352-A (PCIe-based SSD modules, NVME required).
BIOS integrated HW Diagnostic Tool

Security Features

Recovery BIOS, System and BIOS Password, Boot Sequence Control,
Serial/USB- Port Access Protection, Boot Sector Virus Warning,
Write Protection for Flash BIOS, EraseDisk (optional BIOS Feature),
Trusted Platform Module TPM V2.0 (Infineon SLB9670)

Audio

Realtek ALC671, 5.1 Multichannel, High Definition Audio

USB 3.1 Gen2

ASMedia ASM1142

LAN Intel i219LM / Intel i210 Ethernet Controller with 10/100/1000 MBit/s, iAMT / vPro

Wake-on-LAN (WoL) by interesting Packets, Link Status Change and
Magic Packet™, PXE Support, BIOS MAC Address Display, Teaming Support

Drives

8 x SATA III 600 Interfaces (up to 6GBit/s, NCQ); AHCI; RAID 0/1/10.
1 x M.2 Socket (2280) for PCIe (4 lanes) based M.2 modules (NVME required),

Prepared for Intel VROC (Virtual RAID on CPU) for NVME SSD RAID 1
NVME Boot support

Special Features

Silent Fan Independent temperature related processor fan
and system fan supervision and control
System Guard View and adjust Silent Fan features
Silent Drives Noise reduction for optical and hard disk drives
Recovery BIOS Restores a corrupted BIOS
Desk Update Easy driver update with Drivers&Utilities DVD
Multi Boot Comfortable boot from any boot device
HDD Password Access protection for disk drives
24/7 Operation Mainboard is designed for continuous operation
Boot Watchdog Full supervison of BIOS POST and Boot sequence

Operating Systems

OS “Runnable” “Tested/Released by Fujitsu”
MS Windows 7-64 X X
MS Windows 10-64 X X
Linux-64 X (planned)

1 Supported via PCIe Slots only; requires VROC HW License Key

FUJITSU Mainboard D3598-B ATX