Datasheet FUJITSU Mainboard D3417-B µATX
ts.fujitsu.com/mainboards.
Data Sheet
FUJITSU Mainboard D3417-B µATX
Extended Lifecycle Series
Powered by the Intel® C236 Express Chipset supporting DDR4 2133/2400 SDRAM
Memory and 6th & 7th generation Intel® CoreTM i3 / i5 / i7, Xeon® E3-1200 V5 and
Xeon® E3-1200 V6 Processors (Socket LGA1151)
Designed for 24/7 continuous operation @ 50°C
Chipset:
Intel® C236 Express Chipset
Processors:
Intel® Xeon® E3-1200 V5 processor series
Intel® Xeon® E3-1200 V6 processor series
Intel® Core™ i7 / i5 / i3 – (6th gen. & 7th gen.) processor series
Intel® Pentium® / Celeron® processor series
Socket LGA1151 – up to 80W TDP
Memory:
DDR4 2133 SDRAM (UDIMM)
DDR4 2400 SDRAM (UDIMM)
ECC / Non-ECC
Product Features:
Intel® iAMT 11.0
Onboard Support for M.2 SSD (PCIe)
Intel® HD Graphics
PCI Express Gen3
Multichannel Audio & Intel GbE LAN onboard
USB 2.0/3.0 and USB 3.0 Socket (Stick) onboard
Trusted Platform Module V2.0 (Infineon) onboard
HW Watchdog onboard
Data Sheet
ts.fujitsu.com/mainboards.
reduced µATX: 9.6“ x 8.4“ (243.8 x 213.4 mm)
Intel® C236 Express Chipset
4 DIMM Sockets DDR4, max. 64GB, Dual Channel, 2133MHz (CL15)/ 2400MHz (CL17),
UDIMM, 1.2V/2.5V, 288-pin, ECC (appropriate processor required) / non-ECC.
Effective memory speed depends on installed processor
Intel® Xeon® E3-1200 V5 processor series
Intel® Core™ i7 / i5 / i3 – (6th generation) processor series
Intel® Core™ i7 / i5 / i3 – (7th generation) processor series (D3417-B2 only)
Intel® Pentium® / Celeron® processor series
Socket LGA1151, max. 80W TDP
ATX- 24 Pin or ATX- 20 Pin + 4 Pin (12V) Power Connector required
Support for Soft-Off Power Supplies
12V and 3.3V Supply Voltage on PCIe Slots
3.3V Auxiliary Supply Voltage on PCIe Slots (Wake-Up Function)
On board CPU Voltage Regulator, 5V / 2A Auxiliary Power
required for USB Wake-Up from Save-to-RAM, Save-to-Disk
Power Supply Requirements
for onboard components (worst case incl. processor & memory; w/o USB devices;
w/o PCIe cards, w/o M.2 / SATA drives)
1) Max. Cont. Current = 10A; max. Surge Current = 12A (<100sec) / 15A (<10ms)
Mainboard
Capacitive
Load
AMI Aptio 5.x (UEFI) BIOS
modified and adapted by Fujitsu Technology Solutions; Recovery BIOS, SM-BIOS (DMI),
BIOS and CPU Microcode Update, Quick Boot, Logo Boot, Quiet Boot, Plug & Play, Automatic
DRAM and PCIe Configuration, BIOS Support for S.M.A.R.T., Advanced Power Management,
ACPI S3/S4, Wake on time from S5.
Boot support for M.2 SSD (PCIe-based based modules, AHCI / NVME)
Recovery BIOS, System and BIOS Password, Boot Sequence Control,
Serial-/ Parallel-/ USB- Port Access, Boot Sector Virus Warning,
Write Protection for Flash BIOS, EraseDisk (optional BIOS Feature)
Trusted Platform Module (Infineon SLB 9665; TPM V2.0; TCG compliant).
FUJITSU Mainboard D3417-B µATX