Page 1
DATASH EET FUJITSU NETWORKING BROCADE 7800 EXTENSION SWITCH
FUJITSU NETWORKING
BROCADE 7800 EXTENSION SWITCH
BROCADE 7800 EXTENSION SWITCHES ACCELERATE AND OPTIMIZE REPLICATION, BACKUP,
AND MIGRATION OVER ANY DISTANCE WITH THE FASTEST, MOST RELIABLE, AND MOST
COST-EFFECTIVE NETWORK INFRASTRUCTURE.
BROCADE 7800 EXTENSION SWITCH
Brocade 7800 Extension Switches accelerate and
optimize replication, backup, and migration over any
distance with the fastest, most reliable, and most
cost-effective network infrastructure. They combine
class-leading performance and reliability,
“pay-as-you-grow” scalability, and flexible
deployment options to address the most demanding
disaster recovery, compliance, and data mobility
requirements.
The Brocade 7800 leverages cost-effective IP Wide
Area Network (WAN) links to extend open systems
and mainframe storage applications over distances
that would otherwise be impossible, impractical, or
too expensive with standard FC connections. It
maximizes replication, backup, and migration
throughput over distance using advanced Fibre
Channel frame compression, disk and tape protocol
acceleration, and FCIP networking technology.
Up to sixteen 8 Gbps Fibre Channel ports and six 1
Gigabit Ethernet (GbE) ports provide unmatched Fibre
and FCIP bandwidth, port density, and
Channel
throughput for maximum application performance
over WAN links. Whether deployed in a data center or
a remote office, the Brocade 7800 enables
replication and backup applications to move more
data faster and further than ever before. The result is
faster, more reliable data replication and backup,
shorter recovery time from outages, and lower
infrastructure and administrative costs.
The Brocade 7800 leverages the core technology of
Brocade systems performing at greater than 99.999
percent uptime in the world’s most demanding data
centers. It combines enterprise-class availability
such as hot-pluggable redundant power
features
supplies and fans with non-disruptive software
upgrades to maximize application uptime and
minimize outages.
With more than 20,000 extension systems deployed
worldwide and 25 years of data center experience,
Brocade continues to
fastest, most flexible, reliable, and cost-effective
network infrastructure to address today’s dynamic
workload requirements and tomorrow’s
next-generation data centers.
innovate and develop the
Page 1 of 5
www.fujitsu.com/[product name]
Page 2
DATASH EET FUJITSU NETWORKING BROCADE 7800 EXTENSION SWITCH
FEATURES AND BENEFITS
MAIN FEATURES BENEFITS
AVAILABILITY
Dual redundant, hot-swappable power supplies with integrated fans Maximize the availability and minimize outages
INTEROPERABILITY
The same Fabric OS like the whole SAN product family
SCALABILITY AND INVESTMENT PROTECTION
Two models of the Brocade 7800 are available, one with 8 Fibre Channel
and two 1 GbE ports and one with 16 Fibre Channel and six 1 GbE ports
The switch is compatible from the 8-port Brocade 300 Switch to the
768-port Brocade DCX Backbone
This helps ensure seamless interoperability with optional advanced features
such as ISL Trunking, Advanced Performance Monitoring, Fabric Watch, and
Advanced Zoning
The Brocade 7800 is compatible with current and previous-generation Fibre
Channel switches
“pay as you grow” – start with the smaller Switch and when you need more
capacity the switch can be easily upgraded to the bigger one through
software licensing
The easy upgrade provides scalability and investment protection for growing
environments
Page 2 of 5
www.fujitsu.com/storage
Page 3
DATASH EET FUJITSU NETWORKING BROCADE 7800 EXTENSION SWITCH
TECHNICAL DETAILS
SYSTEM ARCHITECTURE BROCADE 7800 EXTENSION SWITCH
Fibre Channel ports 16 ports, universal (E, F, M, Ex, and FL)
FCIP ports 6 ports, 1 GbE (VE)
Scalability Full fabric architecture with 239 switches maximum
Certified maximum
Fibre Channel performance
FCIP performance
ISL Trunking Up to eight 8 Gbps ports per ISL trunk; up to 64 Gbps per ISL trunk. There is no limit to how
Fibre Channel aggregate bandwidth 128 Gbps: 16 ports at 8 Gbps (data rate)
FCIP aggregate bandwidth
Fabric latency
Maximum frame size 2112-byte payload
Maximum MTU size 1500-byte Ethernet packets with FCIP
Classes of service Class 2, Class 3, Class F (inter-switch frames)
Port types
Data traffic types
USB
Media types
Fabric services
Licensing options
Single fabric: 56 domains, 7 hops
Multiprotocol routing fabric: 19 hops
1.063 Gbps line speed, full duplex; 2.125 Gbps line speed, full duplex; 4.25 Gbps line
speed, full duplex; 8.5 Gbps line speed, full duplex. Autosensing of 1 Gbps, 2 Gbps, 4 Gbps,
and 8 Gbps port speeds; optionally programmable to fixed port speed. Speed matching
between 1 Gbps, 2 Gbps, 4 Gbps, and 8 Gbps ports.
1 Gbps line speed
many trunk groups can be configured in the switch.
6 Gbps: 6 ports at 1 Gbps (data rate)
700 ns with no contention, cut-through routing at 8 Gbps
FL_Port, F_Port, E_Port, Ex_Port, M_Port (Mirror Port), and self-discovery based on switch
type (U_Port). For FCIP, VE_Port (Virtual E_Port).
Fabric switches supporting unicast, multicast (255 groups), and broadcast
One USB port for system log file downloads or firmware upgrades
Fibre Channel: Brocade hot-pluggable Small Form Factor Pluggable (SFP) and SFP+, LC
connector; Short-Wave Laser (SWL) and Long-Wave Laser (LWL); distance depends on
fiber-optic cable and port speed; supports SFP+ (2, 4, and 8 Gbps) and SFP (1, 2, and 4
Gbps) optical transceivers 1 GbE: Brocade hot-pluggable optical SFP, Short-Wave Laser
(SWL) and Long-Wave Laser (LWL); GbE Copper SFP; built-in RJ-45 copper (two GbE ports);
distance depends on fiber-optic or copper cable and port speed
Brocade Advanced Zoning, D ynamic Path Selection (DPS), FDMI, Enhanced Group
Management (EGM), Frame Redirection, Registered State Change Notification (RSCN),
Reliable Commit Service (RCS), and Simple Name Server (SNS). Optional
fabric services include Advanced Performance Monitoring, Fabric Watch, Integrated Routing,
and ISL Trunking.
The following optional extension features can be enabled via license keys:
• Advanced Extension: Enables FCIP Trunking and Adaptive Rate Limiting
• Adaptive Networking: Activates Fibre Channel and FCIP QoS functionality
• Brocade 7800 Upgrade License: Enables all ports, additional FCIP tunnels, and
tape read/write pipelining
The following options are available for the Brocade 7800 16/6 Extension Switch or Brocade
7800 4/2 Extension Switch with the Upgrade License:
• FICON Management Server: Control Unit Port (CUP) enables host control of
switches in mainframe environments
• Advanced Accelerator for FICON: Accelerates FICON tape and replication over
distance
Page 3 of 5
www.fujitsu.com/storage
Page 4
DATASH EET FUJITSU NETWORKING BROCADE 7800 EXTENSION SWITCH
MANAGEMENT
Supported management software
SSH v2, HTTP/HTTPS, SNMP v1/v3, Telnet; SNMP (FE MIB, FC Management MIB); Web
Tools; D CFM Professional, Professional Plus, and Enterprise (optional); SMI-S, RADIUS,
LDAP
Security
DH-CHAP (between switches and end devices), HTTPS, IPsec, IP Filtering, LDAP, Port
Binding, RADIUS, Role-Based Access Control (RBAC), Secure Copy (SCP), Secure RPC, SSH
v2, SSL, Switch Binding, Trusted Switch
Management access
Diagnostics
10/100/1000 Ethernet (RJ-45), in-band over Fibre Channel ports; serial port (RJ-45) and
one USB port
POST and embedded online/offline diagnostics, including FCping, Pathinfo (FCtraceroute),
etc.
MECHANICAL
Enclosure
Size
Back-to-front airflow; 1U, 19-inch EIA-compliant, power from back
Width: 43.2 cm (17.0 in)
Height: 4.5 cm (1.8 in)
Depth: 64.1 cm (25.2 in)
System weight
10.9 kg (24.0 lbs) with two power supplies, without SFP/SFP+
ENVIRONMENTAL
Tem per atu re
Operating: 0°C to 40°C (32°F to 104°F)
Non-operating: –25°C to 70°C (–13°F to 158°F)
Humidity
Operating: 10% to 85% non-condensing
Non-operating: 10% to 90% non-condensing
Altitude
Operating: Up to 3000 m (9842 ft)
Storage: Up to 12 km (39,370 ft)
Shock
Vibration
Operating: 20 g, 6 ms half-sine
Non-operating: 33 g, 11 ms, half-sine, 3/eg Axis
Operating: 0.5 g sine, 0.4 grms random, 5 to 500 Hz
Non-operating: 2.0 g sine, 1.1 grms random,
5 to 500 Hz
Heat dissipation Maximum 22 ports: 590 BTU/hr
Airflow Maximum 60 CFM; nominal 44 CFM
POWER
Power supply
Power
Input voltage
Input line frequency
Inrush current
Power Nominal 145 watts; maximum 173 watts
Dual hot-swappable redundant power supplies
inlet C13
85 to 264 VAC nominal
47 to 63 Hz
Maximum of 60 amps for period of 10 to 150 ms
Page 4 of 5
www.fujitsu.com/storage
Page 5
DATASH EET FUJITSU NETWORKING BROCADE 7800 EXTENSION SWITCH
FUJITSU PLATFORM SOLUTIONS
MORE INFORMATION
COPYRIGHT
In addition to the Brocade 7800 Extension Switch,
Fujitsu provides a range of platform solutions.
They combine reliable Fujitsu products with the
best in services, know-how and worldwide
partnerships.
Dynamic Infrastructures
With the Fujitsu Dynamic Infrastructures approach,
Fujitsu offers a full portfolio of IT products,
solutions and services, ranging from clients to
datacenter solutions, Managed Infrastructure and
Infrastructure-as-a-Service. How much you benefit
from Fujitsu technologies and services depends on
the level of cooperation you choose. This takes IT
flexibility and efficiency to the next level.
Computing Products
www.fujitsu.com/global/services/computing/
- PRIMERGY: Industrial standard server
- SPARC Enterprise: UNIX server
- PRIMEQUEST: Mission-critical IA server
- ETERNUS: Storage system
Software
www.fujitsu.com/software/
- Interstage: Application infrastructure software
- Systemwalker: System management software
Learn more about the Brocade 7800 Extension
Switch, please contact your Fujitsu sales
representative, Fujitsu business partner, or visit
our website.
www.fujitsu.com/productname/
FUJITSU GREEN POLICY INNOVATION
Fujitsu Green Policy Innovation is our worldwide
project for reducing burdens on the environment.
Using our global know-how, we aim to resolve
issues of environmental energy efficiency through
IT. Please find further information at:
www.fujitsu.com/global/about/environment/
© Copyright 2009 Fujitsu Technology Solutions
Fujitsu, the Fujitsu logo, Fujitsu brand names are
trademarks or registered trademarks of Fujitsu
Limited in Japan and other countries. Other
company, product and service names may be
trademarks or registered trademarks of their
respective owners.
DISCLAIMER
Technical data subject to modification and delivery
subject to availability. Any liability that the data and
illustrations are complete, actual or correct is
excluded. Designations may be trademarks and/or
copyrights of the respective manufacturer, the use
of which by third parties for their own purposes
may infringe the rights of such owner.
CONTACT
FUJITSU Technology Solutions
E-mail: storage-pm@ts.fujitsu.com
Website: www.fujitsu.com
2010-04-09 WW-EN
Page 5 of 5
www.fujitsu.com/storage
Loading...