Fujitsu AVN5435 Installation Manual

Be sure to read this installation manual thoroughly before carrying out installation and making connections. If installation methods or non-standard parts that are not specified in this installation manual are used, accidents or injury may result. Professional installation is recommended, contact the place of purchase to schedule an appointment. After reading the owner's manual and the installation manual thoroughly, keep them in a safe place for later reference. To dealers:

Give this installation manual to the customer after installation and connections have been completed.

Contents

Components

Installation Diagram

Before

installation

Installation

Connections

For your safety in using the AVN5435 3

Names and functions of terminals 6

Installing the GPS antenna

Installing the main unit

ESN E5 6.5" Wide TFT Touch-Panel Display CD / DVD Multi-Source Receiver with DVD Navigation

INSTALLATION MANUAL

Connecting the vehicle speed pulse signal, parking brake signal cable and reverse cable

System connection example 13

MODEL

-2-

Components

Check that all of the following components are present

GPS antenna components

MAP DVD-ROM x 1

GPS antenna

x 1

Waterproof cushion

x 1

Ground plate

x 1

Body protective sheet

x 1

Interconnecting cable

(Rear speaker connector)

(6P) x 1

Main unit x 1

Wiring components

Clamp

(for GPS antenna) x 3

Cable tie

(for GPS antenna) x 4

Harness fixing tape

x 2

When installing the main unit, some vehicle models may require the use of items that need to be

obtained separately such as a power supply adaptor cable, radio antenna adaptor cable or mounting

bracket.

Tip

Interconnecting cable

(Power and front speaker connector)

(10P) x 1

Main unit components

Hex-head bolt

(Red:M5x8) x 8

Flathead screw

(Red:M5x8) x 8

Splicing connector

x 3

Antenna

extension cable x 1

Interconnecting cable

(video input and steering

remote control connector)

(6P) x 1

-3-

Warnings and caution signs, illustrated bellow, are posted throughout this manual as well as on the

AVN5435. They show safe and correct ways to handle the product so as to prevent personal injury to you

and others and avoid damage to property.

Before reading through the manual, take time to read through and learn the important information listed in

this section.

This sign indicates a situation in which incorrect handling through disregard

of a

sign

might result in death or serious personal injury.

This sign indicates a situation in which incorrect handling through disregard of a sign

might result in personal injury or may result solely in damage to property.

FFor y

or y

our saf

ety in using the A

VN5435

This section contains information that can help to prevent problems and

damage to the unit, and also contain other useful information.

Tip

•

Never supply power to another electrical appliance

by splicing or tapping into this product's power lead (wire). Otherwise, the current capacity of the wire will be exceeded, resulting in a fire or electric shock.

•

Never attempt to disassemble or modify the product.

Otherwise, an accident, fire or electric shock may result.

•

When replacing fuses, be sure to use fuses of the

specified capacity (amperage). Otherwise, damage to the unit, fire or an electric shock may result.

•

When installing the product into a vehicle with a

passenger side air bag, do not secure it to the air bag's cover or in places where it may impede air bag deployment. Otherwise, proper air bag operation may not be ensured in the event of an accident, causing injury or death.

•

When making holes using drill or similar tool, be sure

to wear protective eyewear. Otherwise, an injury such as loss of eyesight may result.

•

Exposed wires must be insulated with electrical tape.

Otherwise, a short circuit, fire, or electric shock may result.

•

Do not modify this system for use other than that

specified herein. Also, do not deviate from the installation procedures described herein; Eclipse will not be held liable for damages including, but not limited to serious injury, death or property damage resulting from installations that enable unintended operation.

•

Do not install this product in locations where it may

obstruct the driver's view, or where it may endanger passengers in the vehicle. Otherwise, an accident or injury may result.

•

Do not install this product in locations where it may

interfere with the operation of the steering wheel, shift lever, brake pedal, etc. Otherwise, an accident or injury may result.

•

To prevent damage to the vehicle, confirm the

locations of hoses, electrical wiring, and the fuel tank prior to drilling holes to install this product. Also, take care so that the product does not interfere, nor come in contact with them. Otherwise, a fire may result.

•

When installing this product, never use the existing

nuts or bolts that secure parts of the fuel tank, or the steering or braking systems. Otherwise, improper steering or braking or a fire may result.

•

To prevent a short circuit from occurring, disconnect

the battery's negative terminal before installing this product. Otherwise, an electric shock or injury may result.

•

When using an existing nut and/or bolt from the

vehicle to ground this product, do not use any that secure parts of the steering or braking systems. Otherwise, an accident may result.

•

Bundle cables and harnesses with electrical tape or

wire ties to prevent them from interfering with moving parts. If they should entangle with the steering wheel, shift lever or brake pedal, an accident may result.

-4-

•

When routing cables, use care so that they do not

contact sharp metal parts such as brackets or screw tips. Otherwise, a short circuit, electric shock, fire or accident may result.

•

Play the audio at a moderate volume level that

permits you to hear sounds from outside the car. Driving without being able to hear outside sounds may result in an accident.

•

This product must be operated only as on-board

equipment, or it may cause electrical shock or injury.

•

Do not play distorted sounds for long periods of time;

the speakers may overheat and cause a fire.

•

For best results, this product should be installed by a

professional installer. Contact the dealer whom you purchased the product for an appointment.

•

When installing this product, be sure to use the

supplied mounting hardware. If parts other than those supplied are used, the unit may be damaged internally, or may not be held in place securely and become dislodged.

•

Avoid installing this product in places where it may

get wet, such as near windows, or in places that are moist or dusty. Presence of liquid, moisture or dust inside this product can cause short circuiting resulting in smoke or fire.

•

If this product is not connected properly, a short

circuit, fire or accident may occur.

•

Do not operate the product in a malfunctioning

condition, for instance, when the audio does not play. Doing so may result in an accident, fire or electrical shock.

•

If an abnormal situation occurs, such as foreign

matter entering or liquid splashing on the product, or smoke or a strange odor emitting from the unit, shut off the product immediately and consult the dealer from whom you purchased it. Continued operation may cause an accident, fire or electrical shock.

•

This unit is intended for operation in DC 12volt,

negative-grounded vehicles only. Never use it in 24volt vehicles such as heavy trucks or diesel cars with cold-region specifications.

•

Do not place the vinyl storage bag over a person. It

may cause a serious accident or death by suffocation.

•

Do not disassemble or rebuild this product. Doing so

may cause an accident, fire or electrical shock.

•

When it is necessary to replace the fuse, always use

a fuse of the correct rating (number of amperes). Use of fuses with higher amperage ratings may cause a fire.

-5-

Installation Diag

Installation Diagrr

GPS antenna

(When installing inside the vehicle)

GPS antenna

(When installing outside the vehicle)

•

If installing the GPS antenna inside the vehicle, the location and the slope of the vehicle's windshield will determine the accuracy of the GPS antenna to receive the GPS signal. If this occurs you may want

to install the antenna outside of the vehicle.

•

The materials used in front and rear vehicle windows can cause GPS reception sensitivity to drop significantly. If this happens, install the GPS antenna on the outside of the vehicle.

Tip

Main unit

-6-

Names and functions of ter

minals

•

Never cut the insulation on the power cable or use it to power any other equipment. If the rated current

capacity of the power cable is exceeded, fire and electric shocks may result.

•

The cables should be secured with tape or similar so that they will not cause an obstruction while

driving. If they get wound around components such as the steering wheel, shifting lever or brake pedal,

accidents may result.

•

Refer to page 7 for details on the wire colors and connection points for interconnecting cables , and

and .

•

Refer to page 8 for details on connection points , , , , , and

for the main unit cables and terminals.

Tip

A B C D E H

13P

Antenna extension cable

Be sure to use when connecting the radio antenna to the vehicle if the oem antenna cable is too short.

GPS ANTENNA

10P

ANTENNA PLUG

MAIN UNIT

INTERCONNECTING CABLE (Video input connector)

INTERCONNECTING CABLE (Rear speaker connector)

INTERCONNECTING CABLE

(Power and front

speaker connector)

+ 14 hidden pages