Thank you for your purchase of this product. This
manual describes how to use your FUJIFILM X100F
digital camera. Be sure that you have read and understood its contents before using the camera.
■ Product website:
http://fujifilm-x.com/x100f/
■ Additional information may be found in online manuals available from:
http://fujifilm-dsc.com/manuals/
Before You Begin
First Steps
Basic Photography
and Playback
Basic Movie Recording
and Playback
The Q (Quick Menu) Button
The Fn (Function) Buttons
More on Photography
and Playback
Menus
Connections
Technical Notes
Troubleshooting
Appendix
For Your Safety
For Your Safety
Installation
Antennas
Use
• Read Instructions: All the safety and operating instructions
should be read before the appliance is operated.
• Retain Instructions: The safety and operating instructions
should be retained for future reference.
• Heed Warnings: All warnings on the appliance and in the
operating instructions should be adhered to.
• Follow Instructions: All operating and use instructions
should be followed.
Installation
Power Sources: This video product should be operated only
from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your
home, consult your appliance dealer or local power company. For video products intended to operate from battery
power, or other sources, refer to the operating instructions.
Grounding or Polarization: This video product is equipped
with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fi t into the
power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fi t, contact your
electrician to replace your obsolete outlet. Do not defeat
the safety purpose of the polarized plug.
Alternate Warnings: This video product is equipped with
a three-wire grounding-type plug, a plug having a third
(grounding) pin. This plug will only fi t into a groundingtype power outlet. This is a safety feature. If you are unable
to insert the plug into the outlet, contact your electrician to
replace your obsolete outlet. Do not defeat the safety purpose of the grounding type plug.
Overloading: Do not overload wall outlets and extension
cords as this can result in a risk of fi re or electric shock.
Ventilation: Slots and openings in the cabinet are provided
for ventilation, to ensure reliable operation of the video
product and to protect it from overheating, and these openings must not be blocked or covered. The openings should
never be blocked by placing the video product on a bed,
sofa, rug, or other similar surface.
ii
IMPORTANT SAFETY INSTRUCTIONS
This video product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation
is provided or the manufacturer’s instructions have been
adhered to. This video product should never be placed near
or over a radiator or heat register.
Attachments: Do not use attachments not recommended by
the video product manufacturer as they may cause hazards.
Water and Moisture: Do not use this video product near water—for example, near a bath tub, wash bowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming pool,
and the like.
Power-Cord Protection: Power-supply cords should be routed
so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the
point where they exit from the appliance.
Accessories: Do not place this video product on an unstable
cart, stand, tripod, bracket, or table. The video product may
fall, causing serious injury to a child or adult, and serious
damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or
sold with the video product. Any mounting of the appliance
should follow the manufacturer’s instructions, and should use
a mounting accessory recommended by the manufacturer.
An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance
and cart combination to overturn.
Antennas
Outdoor Antenna Grounding: If an outside antenna or cable
system is connected to the video product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70,
provides information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
Ground Clamp
Electric Service
Equipment
Ground Clamps
Power Service Grounding Electrode
System (NEC ART 250. PART H)
Power Lines: An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power
lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
Use
Cleaning: Unplug this video product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
Object and Liquid Entry: Never push objects of any kind into this
video product through openings as they may touch dangerous
voltage points or short out parts that could result in a fi re or electric shock. Never spill liquid of any kind on the video product.
Lightning: For added protection for this video product receiver during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will
prevent damage to the video product due to lightning and
power-line surges.
Antenna Lead
in Wire
Antenna
Discharge Unit
(NEC SECTION
810-20)
Grounding Conductors
(NEC SECTION 810-21)
Service
Service
WARNING
Servicing: Do not attempt to service this video product
yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualifi ed service personnel.
Damage Requiring Service: Unplug this video product from
the wall outlet and refer servicing to qualifi ed service personnel under the following conditions:
• When the power-supply cord or plug is damaged
• If liquid has been spilled, or objects have fallen into the
video product.
• If the video product has been exposed to rain or water.
• If the video product has been dropped or the cabinet has
been damaged.
If the video product does not operate normally follow the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper adjustment of other controls may result in damage and will often
require extensive work by a qualifi ed technician to restore
the video product to its normal operation.
When the video product exhibits a distinct change in performance — this indicates a need for service.
Replacement Parts: When replacement parts are required,
be sure the service technician has used replacement parts
specifi ed by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may
result in fi re, electric shock or other hazards.
Safety Check: Upon completion of any service or repairs to
this video product, ask the service technician to perform
safety checks to determine that the video product is in
proper operating condition.
Be sure to read these notes before use
Safety Notes
• Make sure that you use your camera correctly. Read these
safety notes and your Owner’s Manual carefully before use.
• After reading these safety notes, store them in a safe place.
The icons shown below are used in this document to indicate the severity of the injury or damage that can result if the
information indicated by the icon is ignored and the product
is used incorrectly as a result.
WARNING
CAUTION
The icons shown below are used to indicate the nature of the
instructions which are to be observed.
The symbols on the product (including the accesories) represent the following:
About the Icons
This icon indicates that death or serious injury can result if the information
is ignored.
This icon indicates that personal injury
or material damage can result if the information is ignored.
Triangular icons tell you that this information requires attention (“Important”).
Circular icons with a diagonal bar tell you that the
action indicated is prohibited (“Prohibited”).
Filled circles with an exclamation mark indicate an
action that must be performed (“Required”).
AC
DC
Class II equipment (The construction of the prod-
uct is double-insulated.)
For Your Safety
WARNING
If a problem arises, turn the camera o , remove the
battery, and disconnect and unplug the AC power
adapter. Continued use of the camera when it
Unplug
is emitting smoke, is emitting any unusual odor,
from power
or is in any other abnormal state can cause a fi re
socket
or electric shock. Contact your FUJIFILM dealer.
Do not allow water or foreign objects to enter the
camera. If water or foreign objects get inside the
camera, turn the camera off , remove the battery,
and disconnect and unplug the AC power adapter. Continued use of the camera can cause a fi re
or electric shock. Contact your FUJIFILM dealer.
Do not use the camera in the bathroom or shower.
Do not use in
This can cause a fi re or electric shock.
the bathroom
or shower
Never attempt to change or take apart the camera
(never open the case). Failure to observe this pre-
Do not disas-
caution can cause fi re or electric shock.
semble
Should the case break open as the result of a fall or
other accident, do not touch the exposed parts. Fail-
ure to observe this precaution could result in electric shock or in injury from touching the damaged
Do not touch
parts. Remove the battery immediately, taking
internal parts
care to avoid injury or electric shock, and take the
product to the point of purchase for consultation.
Do not change, heat or unduly twist or pull the connection cord and do not place heavy objects on the
connection cord. These actions could damage the
cord and cause a fi re or electric shock. If the cord
is damaged, contact your FUJIFILM dealer.
Do not place the camera on an unstable surface. This
can cause the camera to fall or tip over and cause
injury.
Never attempt to take pictures while in motion. Do
not use the camera while walking or driving. This
can result in you falling down or being involved in
a traffi c accident.
iii
For Your Safety
WARNING
WARNING
CAUTION
WARNING
Do not touch any metal parts of the camera during
a thunderstorm. This can cause an electric shock
due to induced current from the lightning discharge.
Do not use the battery except as speci ed. Load the
battery as shown by the indicator.
Do not disassemble, modify, or heat batteries. Do not
drop, strike, or throw batteries or otherwise subject
them to strong impacts. Do not use batteries that
show signs of leaking, deformation, discoloration, or
other abnormalities. Use only designated chargers
to recharge rechargeable batteries and do not attempt to recharge non-rechargeable Li-ion or alkaline
batteries. Do not short batteries or store them with
metallic objects. Failure to observe these precau-
tions could result in the batteries overheating,
igniting, rupturing, or leaking, causing fi re, burns,
or other injury.
Use only batteries or AC power adapters speci ed for
use with this camera. Do not use voltages other than
the power supply voltage shown. The use of other
power sources can cause a fi re.
If the battery leaks and uid gets in contact with your
eyes, skin or clothing, ush the a ected area with
clean water and seek medical attention or call an
emergency number right away.
Do not use the charger to charge batteries other than
those speci ed here. The supplied charger is for
use only with batteries of the type supplied with
the camera. Using the charger to charge conventional batteries or other types of rechargeable
batteries can cause the battery to leak, overheat
or burst.
Using a ash too close to a person’s eyes may cause
visual impairment. Take particular care when pho-
tographing infants and young children.
WARNING
Do not remain in prolonged contact with hot surfaces.
Failure to observe this precaution could result in
low-temperature burns, particularly at high ambient temperatures or with users who suff er from
poor circulation or reduced sensation, in which
case use of a tripod or similar precautions are
recommended.
Do not leave one part of the body in contact with the
product for prolonged periods while the product is
on. Failure to observe this precaution could result
in low-temperature burns, particularly during
prolonged use, at high ambient temperatures,
or with users who suff er from poor circulation or
reduced sensation, in which case use of a tripod
or similar precautions are recommended.
Do not use in the presence of ammable objects, explosive gases, or dust.
When carrying the battery, install it in a digital camera or keep it in the hard case. When storing the battery, keep it in the hard case. When discarding, cover
the battery terminals with insulation tape. Contact
with other metallic objects or batteries could
cause the battery to ignite or burst.
Keep memory cards, hot shoes, and other small parts
out of the reach of small children. Children may
swallow small parts; keep out of reach of children.
Should a child swallow a small part, seek medical
attention or call emergency.
Keep out of reach of small children. Among the elements that could cause injury are the strap, which
could become entangled about a child’s neck,
causing strangulation, and the fl ash, which could
cause visual impairment.
Follow the directions of airline and hospital personnel. This product generates radio-frequency
emissions that could interfere with navigational
or medical equipment.
CAUTION
Do not use this camera in locations a ected by oil
fumes, steam, humidity or dust. This can cause a
fi re or electric shock.
Do not leave this camera in places subject to extremely
high temperatures. Do not leave the camera in
locations such as a sealed vehicle or in direct sunlight. This can cause a fi re.
Do not place heavy objects on the camera. This can
cause the heavy object to tip over or fall and
cause injury.
Do not move the camera while the AC power adapter
is still connected. Do not pull on the connection cord
to disconnect the AC power adapter. This can dam-
age the power cord or cables and cause a fi re or
electric shock.
Do not cover or wrap the camera or the AC power
adapter in a cloth or blanket. This can cause heat
to build up and distort the casing or cause a fi re.
When you are cleaning the camera or you do not plan
to use the camera for an extended period, remove
the battery and disconnect and unplug the AC power
adapter. Failure to do so can cause a fi re or elec-
tric shock.
When charging ends, unplug the charger from the
power socket. Leaving the charger plugged into
the power socket can cause a fi re.
When a memory card is removed, the card could come
out of the slot too quickly. Use your nger to hold it
and gently release the card. Injury could result to
those struck by the ejected card.
Request regular internal testing and cleaning for
your camera. Build-up of dust in your camera
can cause a fi re or electric shock. Contact your
FUJIFILM dealer to request internal cleaning every
two years. Please note that this service is not free
of charge.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
iv
Note: Check the type of battery used in your camera and
Li-ion Batteries
AC Power Adapters (Available Separately)
Take Test Shots
Notes on Copyright
Handling
read the appropriate sections.
The following describes the proper use of batteries and how
to prolong their life. Incorrect use can shorten batter y life or
cause leakage, overheating, fi re, or explosion.
Li-ion Batteries
Read this section if your camera uses a rechargeable
Li-ion battery.
The battery is not charged at shipment. Charge the battery
before use. Keep the battery in its case when not in use.
The battery gradually loses its charge when not in use.
Charge the battery one or two days before use.
Battery life can be extended by turning the camera off when
not in use.
Battery capacity decreases at low temperatures; a depleted
battery may not function when cold. Keep a fully charged
spare battery in a warm place and exchange as necessary,
or keep the battery in your pocket or other warm place and
insert it in the camera only when shooting. Do not place
the battery in direct contact with hand warmers or other
heating devices.
Charge the battery in the supplied battery charger. Charging
times will increase at ambient temperatures below +10 °C
(+50 °F) or above +35 °C (+95 °F). Do not attempt to charge
the battery at temperatures above 40 °C (+104 °F); at temperatures below 0 °C (+32 °F), the batter y will not charge.
Do not attempt to recharge a fully charged battery. The battery does not however need to be fully discharged before
charging.
The battery may be warm to the touch immediately after
charging or use. This is normal.
At normal temperatures, the battery can be recharged about
300 times. A noticeable decrease in the length of time the
battery will hold a charge indicates that it has reached the
end of its service life and should be replaced.
The Battery and Power Supply
■ Notes on the Battery
■ Charging the Battery
■ Battery Life
■ Storage
Performance may be impaired if the battery is left unused
for extended periods when fully charged. Run the battery
fl at before storing it.
If the camera will not be used for an extended period, remove the battery and store it in a dry place with an ambient
temperature of from +15 °C to +25 °C (+59 °F to +77 °F). Do
not store in locations exposed to extremes of temperature.
■ Cautions: Handling the Battery
• Do not transport or store with metal objects such as necklaces or hairpins.
• Do not expose to fl ame or heat.
• Do not disassemble or modify.
• Use with designated chargers only.
• Dispose of used batteries promptly.
• Do not drop or subject to strong physical shocks.
• Do not expose to water.
• Keep the terminals clean.
• The battery and camera body may become warm to the
touch after extended use. This is normal.
■ Disposal
Dispose of used batteries in accord with local regulations.
AC Power Adapters (Available Separately)
Use only FUJIFILM AC power adapters designated for use
with this camera. Other adapters could damage the camera.
• The AC power adapter is for indoor use only.
• Be sure the DC plug is securely connected to the camera.
• Turn the camera off before disconnecting the adapter.
Disconnect the adapter by the plug, not the cable.
• Do not use with other devices.
• Do not disassemble.
• Do not expose to high heat and humidity.
• Do not subject to strong physical shocks.
• The adapter may hum or become hot to the touch during
use. This is normal.
• If the adapter causes radio interference, reorient or relocate
the receiving antenna.
For Your Safety
• Do not aim the camera at extremely bright light sources,
such as the sun in a cloudless sky. Failure to observe this
precaution could damage the camera image sensor.
• Strong sunlight focused through the viewfi nder may damage the panel of electronic viewfi nder (EVF). Do not aim
the electronic viewfi nder at the sun.
Take Test Shots
Before taking photographs on important occasions (such as
at weddings or before taking the camera on a trip), take a
test shot and view the results to ensure that the camera is
functioning normally. FUJIFILM Corporation can not accept
liability for damages or lost profi ts incurred as a result of
product malfunction.
Notes on Copyright
Unless intended solely for personal use, images recorded using your digital camera system cannot be used in ways that
infringe copyright laws without the consent of the owner.
Note that some restrictions apply to the photographing of
stage performances, entertainments, and exhibits, even
when intended purely for personal use. Users are also asked
to note that the transfer of memory cards containing images
or data protected under copyright laws is only permissible
within the restrictions imposed by those copyright laws.
Handling
To ensure that images are recorded correctly, do not subject
the camera to impact or physical shocks while images are
being recorded.
Using the Camera
v
For Your Safety
Liquid Crystal
Trademark Information
Electrical Interference
Color Television Systems
Exif Print (Exif Version 2.3)
Liquid Crystal
In the event that the display is damaged, care should be
taken to avoid contact with liquid crystal. Take the urgent
action indicated should any of the following situations arise:
• If liquid crystal comes in contact with your skin, clean the
area with a cloth and then wash thoroughly with soap and
running water.
• If liquid crystal enters your eyes, fl ush the aff ected eye with
clean water for at least 15 minutes and then seek medical
assistance.
• If liquid crystal is swallowed, rinse your mouth thoroughly
with water. Drink large quantities of water and induce
vomiting, then seek medical assistance.
Although the display is manufactured using extremely highprecision technology, it may contain pixels that are always lit
or that do not light. This is not a malfunction, and images
recorded with the product are unaff ected.
Trademark Information
Digital Split Image is a trademark or registered trademark
of FUJIFILM Corporation. xD-Picture Card and E are
trademarks of FUJIFILM Corporation. The typefaces included
herein are solely developed by DynaComware Taiwan I nc.
Macintosh, Mac OS, and macOS are trademarks of Apple Inc.
in the U.S.A. and other countries. Windows is a registered
trademark of Microsoft Corporation in the U.S.A. and other
countries. Wi-Fi® and Wi-Fi Protected Setup® are registered
trademarks of the Wi-Fi Alliance. The SDHC and SDXC logos
are trademarks of SD-3C, LLC. The HDMI logo is a trademark. All other trade names mentioned in this manual are
the trademarks or registered trademarks of their respective
owners.
Electrical Interference
This camera may interfere with hospital or aviation equipment. Consult with hospital or airline staff before using the
camera in a hospital or on an aircraft.
Color Television Systems
NTSC (National Television System Committee) is a color television telecasting specifi cation adopted mainly in the U.S.A.,
Canada, and Japan. PAL (Phase Alternation by Line) is a color
television system adopted mainly in European countries and
China.
Exif Print (Exif Version 2.3)
Exif Print is a newly revised digital camera fi le format in
which information stored with photographs is used for optimal color reproduction during printing.
IMPORTANT NOTICE: Read Before Using the Software
Direct or indirect export, in whole or in part, of licensed software without the permission of the applicable governing
bodies is prohibited.
To prevent re or shock hazard, do not expose the unit
NOTICES
to rain or moisture.
Please read the “Safety Notes” and make sure you understand them before using the camera.
Perchlorate Material—special handling may apply. See
http://www.dtsc.ca.gov/hazardouswaste/perchlorate.
vi
For Customers in the U. S. A.
For Customers in the U. S. A.
For Customers in Canada
Disposal of Electrical and Electronic Equipment in Private Households
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
Contains IC : 7736B-02000003
Contains FCC ID : W2Z-02000003
FCC Statement: This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit diff erent
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
FCC Caution: Any changes or modifi cations not expressly approved by the party responsible for compliance could void
the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Radiation Exposure Statement: This device meets the government’s requirements for exposure to radio waves. This device
is designed and manufactured not to exceed the emission
limits for exposure to radio frequency (RF) energy set by the
Federal Communications Commission of the U.S. Government.
The exposure standard for wireless device employs a unit
of measurement known as the Specifi c Absorption Rate, or
SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR
are conducted using standard operating positions accepted
by the FCC with the device transmitting at its highest certifi ed power level in all tested frequency bands.
Notes on the Grant: To comply with Part 15 of the FCC Rules,
this product must be used with a Fujifi lm-specifi ed ferritecore A/V cable, USB cable, and DC supply cord.
A lithium ion battery that is recyclable
powers the product you have purchased.
Please call 1-800-8-BATTERY for information on how to recycle this battery.
For Customers in Canada
CAN ICES-3 (B)/NMB-3(B)
CAUTION: This Class B digital apparatus complies with Cana-
dian ICES-003.
Industry Canada statement: This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to
the following two conditions: (1)This device may not cause
interference; and (2)This device must accept any interference, including interference that may cause undesired operation of the device.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios. The County Code Selection
feature is disabled for products marketed in the US/ Canada.
Radiation Exposure Statement: The available scientifi c
evidence does not show that any health problems are associated with using low power wireless devices. There is no
proof, however, that these low power wireless devices are
absolutely safe. Low power Wireless devices emit low levels
of radio frequency energy (RF) in the microwave range while
being used. Whereas high levels of RF can produce health
For Your Safety
eff ects (by heating tissue), exposure of low-level RF that does
not produce heating eff ects causes no known adverse health
eff ects. Many studies of low-level RF exposures have not
found any biological eff ects. Some studies have suggested
that some biological eff ects might occur, but such fi ndings
have not been confi rmed by additional research. X100F has
been tested and found to comply with IC radiation exposure
limits set forth for an uncontrolled environment and meets
RSS-102 of the IC radio frequency (RF) Exposure rules.
Disposal of Electrical and Electronic Equipment in Private Households
In the European Union, Norway, Iceland and
Liechtenstein: This symbol on the product, or in
the manual and in the warranty, and/or on its
packaging indicates that this product shall not
be treated as household waste. Instead it should
be taken to an applicable collection point for the
recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences to the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product.
This symbol on the batteries or accumulators indicates that those batteries shall not be treated
as household waste.
If your equipment contains easy removable batteries or
accumulators please dispose these separately according to
your local requirements.
The recycling of materials will help to conserve natural resources. For more detailed information about recycling this product,
please contact your local city offi ce, your household waste
disposal service or the shop where you purchased the product.
In Countries Outside the European Union, Norway, Iceland and
Liechtenstein: If you wish to discard this product, including
the batteries or accumulators, please contact your local authorities and ask for the correct way of disposal.
In Japan: This symbol on the batteries indicates
that they are to be disposed of separately.
vii
For Your Safety
European Union regulatory notice
European Union regulatory notice
This product complies with the following EU Directives:
• RoHS Directive 2011/65/EU
• R & TTE Directive 1999/5/EC
Compliance with these directives implies conformity to applicable harmonized European
standards (European Norms) which are listed on the EU Declaration of Conformity issued by
FUJIFILM Corporation for this product or product family.
This compliance is indicated by the following conformity marking placed on the product:
This marking is valid for non-Telecom products and EU harmonized Telecom products (e.g.
Bluetooth).
Regarding the Declaration of Conformity, visit http://www.fujifilm.com/products/digital_cameras/x/fujifilm_x100f/pdf/index/fujifilm_x100f_cod.pdf.
IMPORTANT: Read the following notices before using the camera’s built-in wireless
transmitter.
Q This product, which contains encryption function developed in the United States, is con-
trolled by the United States Export Administration Regulations and may not be exported
or re-exported to any country to which the United States embargoes goods.
• Use only as part of a wireless network. FUJIFILM does not accept liability for damages resulting from unauthorized use. Do not use in applications requiring a high degree of reliability,
for example in medical devices or other systems that may directly or indirectly impact
human life. When using the device in computer and other systems that demand a greater
degree of reliability than wireless networks, be sure to take all necessary precautions to
ensure safety and prevent malfunction.
• Use only in the country in which the device was purchased. This device conforms to regulations
governing wireless network devices in the country in which it was purchased. Observe all
location regulations when using the device. FUJIFILM does not accept liability for problems arising from use in other jurisdictions.
• Wireless data (images) may be intercepted by third parties. The security of data transmitted
over wireless networks is not guaranteed.
• Do not use the device in locations subject to magnetic elds, static electricity, or radio interference.
Do not use the transmitter in the vicinity of microwave ovens or in other locations subject
to magnetic fi elds, static electricity, or radio interference that may prevent reception of
wireless signals. Mutual interference may occur when the transmitter is used in the vicinity
of other wireless devices operating in the 2.4 GHz band.
• The wireless transmitter operates in the 2.4 GHz band using DSSS and OFDM modulation.
• This device operates on the same frequency as commercial, educational, and medical devices and wireless transmitters. It also operates on the same frequency as licensed transmitters and
special unlicensed low-voltage transmitters used in RFID tracking systems for assembly
lines and in other similar applications.
• To prevent interference with the above devices, observe the following precautions. Confi rm that
the RFID transmitter is not in operation before using this device. Should you observe that
the device causes interference in licensed transmitters used for RFID tracking, immediately stop using the aff ected frequency or move the device to another location. If you
notice that this device causes interference in low-voltage RFID tracing systems, contact a
FUJIFILM representative.
2.4DS/OF4
Wireless Network Devices: Cautions
This sticker indicates that this device operates in the 2.4 GHz
band using DSSS and OFDM modulation and may cause interference at distances of up to 40 m.
viii
About This Manual
About This Manual
Table of Contents
.................................................
xii
Troubleshooting
................................................
152
Warning Messages and Displays
.........................
157
Restrictions on Camera Settings
..........................
168
Memory Cards
Before using the camera, read this manual and the warnings in “For Your Safety” (P ii). For information
on speci c topics, consult the sources below.
Table of Contents
The “Table of Contents” gives an overview of the
entire manual. The principal camera operations
Having a speci c problem with the camera?
Find the answer here.
152
are listed here.
Warning Messages and Displays
Find out what’s behind that ashing icon or error
message in the display.
Memory Cards
Pictures are stored on optional SD, SDHC, and SDXC memory cards (P 23), referred to in this manual as “memory
cards.”
.........................PP
157
Restrictions on Camera Settings
..........................PP
See page 168 for restrictions on the options available in each shooting mode.
168
ix
Product Care
Product Care
For continued enjoyment of your camera, use a soft, dry cloth to clean the camera body after each
use. Do not use alcohol, thinner, or other volatile chemicals, which could discolor or deform the leather
on the camera body. Any liquid on the camera should be removed immediately with a soft, dry cloth.
Use a blower to remove dust from the lens and monitor, then gently wipe with a soft, dry cloth. Any
remaining stains can be removed by wiping gently with a piece of FUJIFILM lens-cleaning paper to
which a small amount of lens-cleaning uid has been applied. Care should be taken to avoid scratching the lens or monitor.
x
Product Features
Product Features
The Q Menu (
43)
“My Menu” (
107)
The Function Buttons (
46)
Frequently-used options can be added to the Q menu or a custom “my” menu or assigned to an Fn
(function) button for direct access. Customize camera controls to suit your style or situation.
The Q Menu (PP
43)
The Q menu is displayed by pressing the Q button.
SELECT CUSTOM SETTING
BASE
SET
Use the Q menu to view or change the options
selected for frequently-used menu items.
“My Menu” (PP
107)
Add frequently-used options to this custom
menu, which can be viewed by pressing MENU/OK
and selecting the E (“MY MENU”) tab.
MY MENU
SELF-TIMER
INTERVAL TIMER SHOOTING
FILM SIMULATION BKT
PHOTOMETRY
SHUTTER TYPE
DIGITAL TELE-CONV.
FACE/EYE DETECTION SETTING
ISO AUTO SETTING
R The E tab is only available if options have been as-
signed to “MY MENU”.
EXIT
The Function Buttons (PP
46)
Use the function buttons for direct access to selected features.
PHOTOMETRY
MULTI
The illustration shows the Fn1 button being used to display
metering options.
xi
Table of Contents
Table of Contents
Before You Begin
First Steps
Basic Photography and Playback
For Your Safety .....................................................................................ii
IMPORTANT SAFETY INSTRUCTIONS .........................................ii
Restrictions on Camera Settings ............................................ 168
xvi
Before You Begin
Before You Begin
Symbols and Conventions
Supplied Accessories
Symbols and Conventions
The following symbols are used in this manual:
Q This information should be read before use to ensure correct operation.
R Additional information that may be helpful when using the camera.
P Other pages in this manual on which related information may be found.
Menus and other text in the displays are shown in bold. Illustrations are for explanatory purposes only;
drawings may be simpli ed, while photographs are not necessarily taken with the model of camera
described in this manual.
Supplied Accessories
The following items are included with the camera:
NP-W126S rechargeable batteryBC-W126 battery charger Lens cap (× 1)
Before You Begin
Clip attaching toolMetal strap clips (× 2)
• Protective covers (× 2)
• Shoulder strap
• Owner’s Manual (this manual)
USB cable (Micro-B) (× 1)
1
Parts of the Camera
Parts of the Camera
For more information, refer to the page listed to the right of each item.
Do not remove the serial number plate, which provides
the FCC ID, KC mark, serial number, and other important information.
Control Lock
To prevent accidental operation of the selector and
Q button during shooting, press MENU/OK until X is
displayed. The controls can be unlocked by pressing
MENU/OK until X is no longer displayed.
The Selector
Press the selector up (q), right (e), down (r), or
left (w) to highlight items. The up, left, right, and
down buttons also double as the DRIVE (P 55), Fn3
( lm simulation; P 65), Fn4 (white balance; P 66),
and Fn5 (AF mode; P 71) buttons, respectively
(P 46).
4
The Focus Stick (Focus Lever)
The Focus Stick (Focus Lever)
The Shutter-Speed/ISO Dial
Tilt or press the focus stick to select the focus
area (P 72). The stick can also be used to scroll
images during playback zoom and to navigate
the menus.
Parts of the Camera
The Shutter-Speed/ISO Dial
Choose a shutter speed and ISO sensitivity.
Rotate the dial to choose a shutter
speed (P 49, 50, 51, 53).
Lift and rotate the dial to choose ISO
sensitivity (P 63).
Before You Begin
5
Parts of the Camera
The Command Dials
Front command dial
Rear command dial
Rotate
Press
Exposure Compensation and Sensitivity
Formatting Memory Cards
The Command Dials
Rotate or press the command dials to:
Front command dial
Rear command dial
Select menu tabs or page through menus (P 89, 108, 113),
djust exposure compensation or sensitivity (see below),
choose the size of the focus frame (P 73, 74), or view other
pictures during playback without changing the zoom ratio
(P 35, 37).
Switch back and forth between exposure compensation
and sensitivity (see below).
Exposure Compensation and Sensitivity
Highlight menu items (P 89, 108, 113), choose the desired
combination of shutter and aperture (program shift;
P 49), choose a shutter speed (P 50, 53), adjust settings
in the quick menu (P 44), choose the size of the fo-
Rotate
cus frame (P 73, 74), or zoom in or out in full-frame or
thumbnail playback (P 37, 38).
Zoom in on the selected focus area or (in playback mode)
the active focus point. Press and hold to choose the manual focus mode focus display.
Press
The front command dial can be used to adjust exposure compensation when C is selected with the exposure
compensation dial, and to adjust sensitivity when the sensitivity dial is set to A and COMMAND is selected for
DBUTTON/DIAL SETTING> ISO DIAL SETTING (A). The rear command dial can be used to switch between
exposure compensation and sensitivity when either of the foregoing conditions are met.
Formatting Memory Cards
To format memory cards, press the center of the command dial while pressing and holding the b button. The FORMAT menu will be displayed; select a slot and format the card as described on page114.
6
The Indicator Lamp
The Indicator Lamp
Indicator lamp
Camera status
Glows green
Blinks green
Blinks green and orange
Glows orange
Blinks orange
Blinks red
When the view nder is not in use (P 27), the indicator lamp shows camera status.
Indicator lamp
Glows greenFocus locked.
Blinks greenFocus or slow shutter speed warning. Pictures can be taken.
Blinks green and orange Recording pictures. Additional pictures can be taken.
Glows orange
Blinks orangeFlash charging; ash will not re when picture is taken.
Blinks redLens or memory error.
R Warnings may also appear in the display (P 157).R The indicator lamp does not light when your eye is to the view nder (P 27).
Recording pictures. No additional pictures can be taken at this
time.
Camera status
Parts of the Camera
Before You Begin
Indicator lamp
7
Parts of the Camera
The Control Ring
Shooting mode
Function
PP, , SS, , AA, , M
Advanced Filter
Panorama/Multiple Exposure
The Control Ring
Use the control ring for quick access to camera functions during shooting. The function assigned to the control ring can be selected by pressing the control ring options button. Choose from:
• DEFAULT• WHITE BALANCE
• FILM SIMULATION• DIGITAL TELE-CONV.
R The function assigned to the control ring can also be selected using D BUTTON/DIAL SETTING> CONTROL RING SETTING
(P 122).
■ DEFAULT
When DEFAULT is selected, the function assigned to the control ring changes with the shooting mode.
Shooting mode
MDigital teleconverter
Advanced FilterFilter selection
Panorama/Multiple ExposureFilm simulation
R Regardless of the option selected, when the focus mode selector is rotated to M (manual) in shooting mode P, S, A, or M, the
control ring can be used only for manual focus.
Function
8
The Aperture Ring and Shutter Speed Dial
The Aperture Ring and Shutter Speed Dial
Use the aperture ring and shutter speed dial to
choose from modes P, S, A, and M.
Shutter speed dial
Aperture ring
■ Mode P: Program AE
Aperture and shutter speed can be adjusted using program shift.
Aperture: AShutter speed: A
Parts of the Camera
■ Mode S: Shutter-Priority AE
Take pictures at the selected shutter speed. The
camera adjusts aperture automatically.
Before You Begin
Aperture: AShutter speed: Choose a speed
■ Mode A: Aperture-Priority AE
Take pictures at the selected aperture. The camera adjusts shutter speed automatically.
Aperture: Choose an apertureShutter speed: A
■ Mode M: Manual Exposure
Take pictures at the selected aperture and shutter
speed.
Aperture: Choose an apertureShutter speed: Choose a speed
9
Parts of the Camera
Camera Displays
Camera Displays
The following types of indicator may be displayed during shooting and playback. In the description that
follows, all available indicators are shown for illustrative purposes; the indicators actually displayed vary
with camera settings. Note that the LCD monitor and electronic view nder have di erent aspect ratios.
■ Shooting: Optical View nder
3
2
1
0
-1
-2
-3
10
Parts of the Camera
Control Lock
Pressing a locked control (
4) displays a
icon.
Before You Begin
Control lock ......................................................... 4
A
Sound and ash indicator ...............................115