OWNER’S MANUAL
PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE
OPERATING YOUR NEW ELLIPTICAL!
Table of Contents
Product Registration ..2
Important Safety Instructions 3
Important Electrical Information 4
Important Operation Instructions ..4
Assembly Instructions .5
Features ..14
Operation of Your New Elliptical ..15
Maintenance ... 20
Manufacturer s Limited Warranty .21
1 |
FE46 Elliptical |
|
CONGRATULATIONS ON YOUR
NEW ELLIPTICAL AND WELCOME
TO THE FUEL FAMILY!
Thank you for your purchase of this quality elliptical trainer from FUEL. Your new elliptical has been manufactured by one of the leading fitness manufacturers in the world and is backed by one of the most comprehensive warranties available. FUEL will do all we can to make your ownership experience as pleasant as possible for many years to come.
If you have a problem that requires service, call FUEL at: 866-545-3835,or send an email to: service@fuelfitnessusa.com
Please take a moment at this time to record below the name of the dealer, their telephone number, and the date of purchase for easy contact in the future. We appreciate your confidence in FUEL and we will always remember that you are the reason that we are in business. Please complete and mail your registration card today and enjoy your new elliptical.
Yours in Health,
FUEL Fitness
Name of Dealer______________________________________
Telephone Number of Dealer___________________________
Purchase Date_______________________________________
Product Registration
RECORD YOUR SERIAL NUMBER
Please record the Serial Number of this fitness product in the space provided below.
Serial Number_______________________________________
REGISTER YOUR PURCHASE
The self-addressed product registration card must be completed in full and returned to FUEL. Or to register online go to: www.fuelfitnessusa.com
FE46/ 2008 Ver.A
2 |
FE46 Elliptical |
|
Important Safety Instructions
WARNING - Read all instructions before using this appliance.
Do not operate elliptical on deeply padded, plush or shag carpet. Damage to both carpet and elliptical may result.
Keep children away from the elliptical. There are obvious pinch points and other caution areas that can cause harm.
Keep hands away from all moving parts.
Never operate the elliptical if it has a damaged cord or plug. If the elliptical is not working properly, call your dealer.
Keep the cord away from heated surfaces.
Do not operate where aerosol spray products are being used or where oxygen is being administered. Sparks from the motor may ignite a highly gaseous environment.
Never drop or insert any object into any openings.
Do not use outdoors.
To disconnect, turn all controls to the off position, then remove the plug from the outlet.
Do not attempt to use your elliptical for any purpose other than for the purpose it is intended.
The hand pulse sensors are not medical devices. Various factors, including the user s movement, may affect the accuracy of heart rate readings. The pulse sensors are intended only as exercise aids in determining heart rate trends in general.
Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on your elliptical. Quality athletic shoes are recommended to avoid leg fatigue.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
3 |
FE46 Elliptical |
|
Important Electrical Information
WARNING!
NEVER remove any cover without first disconnecting AC power supply.
If A.C. voltage varies by ten percent (10%) or more, the performance of your elliptical may be affected. Such conditions are not covered under your warranty. If you suspect the voltage is low, contact your local power company or a licensed electrician for proper testing.
NEVER expose this elliptical to rain or moisture. This product is NOT designed for Use outdoors, near a pool or spa, or in any other high humidity environment. Maximum environmental ratings are 40-120 degrees Fahrenheit, 95% humidity non-condensing (no water droplets forming on surfaces).
Important Operation Instructions
NEVER operate this elliptical without reading and completely understanding the results of any operational change you request from the computer.
Understand that changes in resistance do not occur immediately. Set your desired level on the computer console and release the adjustment key. The computer will obey the command gradually.
NEVER use your elliptical during an electrical storm. Surges may occur in your household power supply that could damage elliptical components.
Use caution while participating in other activities while using your elliptical such as watching television, reading, etc. These distractions may cause you to lose balance, resulting in serious injury.
Always hold on to a handrail or hand bar while making control changes.
Do not use excessive pressure on console control keys. They are precision set to properly function with little finger pressure. Pushing harder is not going to make the unit go faster or slower. If you feel the buttons are not functioning properly with normal pressure, contact your FUEL dealer.
4 |
FE46 Elliptical |
|
Assembly Instructions ( FE46 )
UNPACKING THE UNIT
1.Using a razor knife (Box Cutter) cut the outside, bottom, edge of box along the dotted Line. Lift box over the unit and unpack.
2.Carefully remove all parts from carton and inspect for any damage or missing parts. If damaged parts are found, or parts are missing, contact your dealer immediately.
3.Locate the hardware package. The hardware is separated into steps. Remove the tools first. Remove the hardware for each step as needed to avoid confusion.
FE46 ASSEMBLY PACK CHECK LIST
Step 1
#94. 3/8"x 19 x1.5T |
|
#114. 3/8"x 23 x2T |
#120. 3/8" x2T Split |
|||||
Flat Washer (2pcs) |
|
Curved Washer (1pc) |
Washer (3pcs) |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#78. M5 x 10m/m |
#119. 3/8" x 3-4/3" |
Phillips Head Screw (4pcs) |
Hex Head Bolt (3pcs) |
5 |
FE46 Elliptical |
|
Step 2
#97. 5/16" x 23 x |
#70. 5/16" x 15m/m |
#101. 17 |
1.5T Flat Washer |
Hex Head Bolt (2pcs) |
Wave Washer (2pcs) |
(2pcs) |
|
|
Step 3
#71. 5/16 x 32m/m |
#105. 5/16" x 7T |
#89. 3/8" x 7T |
Hex Head Bolt (2 pcs) |
Nylon Nut (2 pcs) |
Nylon Nut (2 pcs) |
#98. 5/16" x 20 x 1.5T Flat Washer (2pcs)
#94. 3/8" x 19 x 1.5T Flat Washer (2pcs)
#114. 3/8" x 23 x 2T Curved Washer (4pcs)
#76. 3/8 x 2-1/4"
Button Head Socket Bolt (6pcs)
6 |
FE46 Elliptical |
|
Loading...