FSR IT-SACWP User Manual
IT-SACWP
Wallplate
DESCRIPTION
DESCRIPTION
The IT-SACWP Wallplate provides convenient, remotely switched AC to power Projectors, displays and other
AC powered devices via a low voltage hard wired control input. Intended applications are for remote load
switching within one of our floor boxes or PWB wall
boxes. The unit is easily mounted in FSR’s CB-series,
PWB series, WB-X series, Floor Boxes, HuddleVU stations, flex control series, top shelf, etc. allowing remote
AC power control of amplifiers, switchers and more.
AV Products Group
FEATURES
FEATURES
• 14 AWG solid wire 6” free length,
(L, N, G) for AC input
• Wire nuts included
• White wall plate with black AC outlet
• LED relay state indicator
• Screw terminals for quick and easy control
input wiring
• Compact 1-gang form factor
IT-SACWP
The single gang, Decora style, 15 amp rated, switched
AC outlet wires directly to a 15 amp branch circuit via
the input harness at the back of the unit. Connections
to the branch circuit are made using the included wire
nuts.
The switching technology is relay based for reliable
operation and minimal heat dissipation. Control is
accomplished via the fixed 2 position screw terminal
connector. A green LED is provided for visual indication
of the relay state. Two standard models are available to
allow control from either 12 or 24VDC systems. See
ordering information.
Applications include: Remote power switching for
self-powered stage monitors as well as vocalist,
musician headphone mixing systems. This allows a
power sequencer to turn on AC power to stage
speakers. Useful for any type of stage, auditorium,
or house of worship scenario.
43050
SPECIFICATIONS
SPECIFICATIONS
Device rated current
12 A (switches standard 15 amp circuit
subject to a 20% UL derating)
Operate time
15 ms max
ORDERING INFORMATION
ORDERING INFORMATION
IT-SACWP operates from a
12VDC@ 90mA drive signal.
(The HuddleVU system uses the 12VDC version.)
IT-SACWP-24 operates from a
24VDC@ 50mA drive signal
FSR Inc.
244 Bergen Boulevard, Woodland Park, NJ 07424
Phone: 973.785.4347 · Fax: 973.785.4207
Web: www.fsrinc.com · E-mail: sales@fsrinc.com
LIT1478A
SWITCHED AC
12A MAX.
RELAY INPUT
ON
+
-
IT-SACWP
FSR
1.70 .15
1.43
1.57
4.09
2.72
TO AC
POWER
2.41
IT-SACWP
SWIT CHED A C
12A MAX.
RELAY INPUT
ON
+
-
IT-SACWP
IT-SACWP
SW ITC HED A C
WALL PLATE
TYPICAL APPLICATION OF POWER TO A VIDEO DISPLAY
INPUT FROM A
CONTROL SOURCE
OPERATING VOLTAGE
IS DEPENDENT ON MODEL
CONTROLLED BY AN IT-SACWP SWITCHED AC WALLPLATE
FSR
WIRE TO A 15 AMP
PROTECTED BRANCH
CIRCUIT BY A
QUALIFIED ELECTRICIAN
RELAY INPUT
ON
+
-
L N G
APPLICLTYPICA
VIDEO DISPL A
TION OF POWER
APPLICA
YA VIDEO DISPL
CONTROLLED B
APPLICLTYPICA
WAC SWITCHED
AN IY
VIDEO DISPL A
TION OF POWER
APPLICA
MAX.A12
ACSWITCHED
TEA
WALL PL
YA VIDEO DISPL
QUALIFIED ELECTRICIAN
CIRCUIT BY A
PROTECTED BRANCH
WIRE TO A 15 AMP
-
+
ON
REL
FSR
QUALIFIED ELECTRICIAN
CIRCUIT BY A
PROTECTED BRANCH
WIRE TO A 15 AMP
TE
ACSWITCHED
I
I
L N G
-
IS DEPENDENT ON MODEL
OPERATING VOLTAGE
CONTROL SOURCE
INPUT FROM A
+
ON
REL
IS DEPENDENT ON MODEL
OPERATING VOLTAGE
CONTROL SOURCE
INPUT FROM A
DIMENSIONS
DIMENSIONS
NOTE: Relay operating voltage and silk
screen information are model dependent.
See ordering information section.
TYPICAL APPLICATION
TYPICAL APPLICATION
MADE IN USA
Specifications are subject to change without notice.
244 Bergen Boulevard, Woodland Park, NJ 07424
Phone: 973.785.4347 · Fax: 973.785.4207
Web: www.fsrinc.com · E-mail: sales@fsrinc.com
Loading...