FSR DV-HMSW-88 User Manual

USER MANUAL

DV-HMSW-88

8x8 MATRIX SWITCHER

244 Bergen Boulevard, Woodland Park, NJ 07424  Tel [phone]  FAX [phone]  Web www.fsrinc.com

LIT1373A

1 Proprietary Information

All information in this manual is proprietary to and the property of FSR Inc. This publication is
protected by the Federal Copyright Law, with all right s reserved. No part of this document may be
reproduced, transcribed, or transmitted, in any form or by any means, without prior explicit written
permission from FSR Inc.

1.1 UNPACKING

The DV-HMSW-88 8x8 PRESENTATION MATRIX SWITCHER package includes the following
items;

 Main body: DV-HMSW-88
 Power adapter: DC12V, 5A 60W
 RS232C cable/ LAN cable
 IR Remote Controller
 Rack Ears
 Digital Controller program
 User’s manual

Cautions:

1. FSR logo is a trademark of FSR Inc.

2. HDMI is a trademark of HDMI licensing, LLC.

3. Specification may be changed without any notice in order to
improve the function of the product.

4. The design and specification of the product may be change

without any prior notice.

2

Table of Contents

1 PROPRIETARY INFORMATION...........................................................................................................................2

1.1 UNPACKING.............................................................................................................................................. 2

1.2 SAFETY.....................................................................................................................................................4

1.3 FEA T URES................................................................................................................................................5

1.4 FRONT PANEL..........................................................................................................................................6

1.5 BACK PANEL............................................................................................................................................6

2 ENVIRONMENTAL................................................................................................................................................7

3 FUNCTIONS OF THE PRODUCT.........................................................................................................................7

3.1 SYSTEM OPERATION CONFIGURATION DIAGRAM ............................................................................ 7

3.2 SPECIFICATIONS.....................................................................................................................................8

4 OPERA TION..........................................................................................................................................................9

4.1 PRODUCT ID SETTINGS..........................................................................................................................9

4.2 INITIALIZA TION........................................................................................................................................9

4.3 OPERA TION BY FRONT PANEL BUTTONS.........................................................................................10

4.4 SETTING UP IP ADDRESS VIA THE DV-HMSW-88 FRONT PANEL ................................................... 11

4.5 SETTING THE BAUD RATE VIA THE DV-HMSW-88 FRONT PANEL.................................................. 11

4.6 IR REMOTE CONTROL UNIT................................................................................................................. 12

5 RS-232 PROTOCOL...........................................................................................................................................13

5.1 RS-232C (COM PORT) COMMUNICATION SETTINGS........................................................................ 13

5.2 GENERAL NOTES..................................................................................................................................13

5.3 REQUEST/RESPONSE FORMA T..........................................................................................................13

5.4 COMMAND REQUEST SYNTAX:...........................................................................................................13

5.5 ACKNOWLEDGING RECEIPT OF COMMANDS...................................................................................14

5.6 ERROR RESPONSE...............................................................................................................................14

6 COMMAND LIST:................................................................................................................................................15

6.1 SET CON COMMAND.............................................................................................................................15

6.2 SET HDMI EDID ...................................................................................................................................... 15

6.3 RESET DV-HMSW-88..............................................................................................................................16

6.4 GET UNIVERSAL STATUS COMMAND................................................................................................. 16

6.5 GET OUTPUT CONNECTION STATUS..................................................................................................16

6.6 RS232 SETTINGS...................................................................................................................................17

6.7 LAN SETTINGS....................................................................................................................................... 17

7 LAN (TCP/IP) COMMUNICATION SETTING .....................................................................................................18

8 CONNECTOR PIN ASSIGNMENT......................................................................................................................21

9 LIMITED WARRANTY........................................................................................................................................23

3

1.2 SAFETY

All the safety and user manual should be read before the appliance is operated.

 The safety and operating instructions should be retained for future reference.
 Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a

damp cloth for cleaning.

 Do not use this equipment near wet place.
 This product should be operated only from the type of power sources indicated on the marking label. If you are

not sure of the type of power supplied to your home, consult your local power company. For equipment
intended to operate from battery power, or other source, refer to the user manual.

 This equipment may be equipped with a 3 wire grounding-type plug, a plug having a third (grounding) pin.

This pin will only fit in to a grounding type power outlet. This is a safety feature. If you are unable to insert the
plug in to the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose
of the grounding-type plug.

 Openings on the case are provided for ventilation and to ensure reliable operation of the equipment and to

protect it from overheating. The openings should never be blocked.

 Do not use any damaged power cords or plugs, or loosed outlets, this may cause electrical shock or fire.
 Do not put heavy articles such as other equipments on this product.
 Keep it away from liquid, magnetic, inflammable substances.
 It is suggested to perform the product three minutes after the power is on for a precise measurement and

analysis.

4

1.3 FEATURES

The HDMI Matrix Router supports the highest quality of HDMI version 1.3 and full matrix routing functions. It is
possible to transmit high definition A/V signals from any of up to 8 sources to any of 8 displays, while maintaining
HDCP (High-bandwidth Digital Content Protection) compliance.

.

 Compliant to HDMI v1.3, and DVI v1.0, the next generation standard for A/V connection
 Fully supports router function from one input to multi output routing
 Supports HDCP Complaint at all output channels
 Enhanced quality and color of digital signals
 Built in Extended Display Identification Data (EDID) read function, with Electrically Erase Programmable

Read-Only Memory (EEPROM), to save display EDID data while supporting any HDTV with maximum
resolutions. The unit also supports user set up non-Video Electronics Standards Association (VESA)
resolution, including projectors with unique resolutions.

 Supports HDTV Signal up to 1080p@60Hz with 36-bit color depth, Dolby® True HD, DTS-HD
 Control through 4 different methods

- Front push button

- IR remote controller

- RS-232C COM port

- LAN (TCP/IP)

 It has an instantaneous noise protection circuit in input and output ports, therefore it can protect expensive

equipment from fault caused by noises (if any).

**** EDID [Extended Display Identification Data]
EDID is defined by a standard published by the Video Electronics S t andards Association (VESA). The EDID includes

manufacturer name, product type, phospher or filter type, timings supported by the display, display size, luminance
data and (for digital displays only) pixel mappi ng data.

5

FRONT PANEL

1.4

 Main power switch: matrix power on/off
 Config key: product ID set from 1 to 8
 Preset key: save preset (up to 16 presets)
 Select key: select number
 Input key: select channel from 1 to 8
 Output key: select channel from 1 to 8
 Enter key: sav e current selection
 Cancel key: cancel current selection
 Create key: change input/output channel
 Preview key: preview the status of current conn ection
 EDID key: read EDID data from display and then save data to matrix, which is connected to output ports
 IR: receive infrared ray from remote controller
 Reset key: initialize the matrix

BACK PANEL

1.5

 POWER Connector: 12V DC. Power
 9 Pin D-Sub Connector: RS-232C
 LAN Port: Ethernet
 Dip Switch: Product ID Setup (1~99)
 Output LED: Indicate output status
 Input Rotary Switch: Set up EDID mode

 0: Manual set up mode
 1: 720p& 1080i , 2ch audio
 2: 1080p , 2ch audio
 3: 1080p , multi ch audio
 4: WUXGA (DVI mode)
 5~9: Reserved

6

2 Environmental

For installation, we recommend the following environments.

 Below 85 F (30°C) of ambient temperature (Best condition)
 Install and operate below 60% of ambient humidity (Best condition)
 Free of vibrations and dusts with good ventilation condition
 Stabilized AC input power (Recommended to use Uninterruptible Power Supply)

3 Functions of the product

3.1 System operation configuration diagram

The configuration diagram of the matrix operation is shown in the following picture.
Any of the HDMI or DVI input signals can be transmitted to each output port by external RS-232C, LAN or front panel
button.

7