FSR DV-HAS User Manual

USER MANUAL

DV-HAS HDMI Audio Separator

244 Bergen Boulevard, Woodland Park, NJ 07424  Tel [phone]  FAX [phone]

Web: www.fsrinc.com

LIT1460A

Proprietary Information

All information in this manual is proprietary to and the property of FSR Inc. This
publication is protected by the Federal Copyright Law, with all rights reserved.
No part of this document may be reproduced, transcribed, or transmitted, in
any form or by any means, without prior explicit written permission from FSR
Inc.

Unpacking

Each DV-HAS HDMI Audio Separator includes the following items:

- DV-HAS HDMI Audio Separator Unit

- 5V Power Adapter

- HDMI Cable

- User manual

Cautions:

1. FSR logo is a trademark of FSR Inc.

2. HDMI is a trademark of HDMI licensing, LLC.

3. Specification may be changed without any notice in order to
improve the function of the product.

4. The design and specification of the product may be change

without any prior notice.

2

Table of Contents

Proprietary Information ............................................................................................ 2

Basic understanding of the product ......................................................................... 4

Description, General Specification .......................................................................... 5 

Environmental and Reliability Specifications ........................................................... 6

Main Features ......................................................................................................... 7 

Video/ Audio Connections ....................................................................................... 8

DV-HAS Typical Application .................................................................................... 9

Technical Specification .......................................................................................... 10

Mechanical Dimensions......................................................................................... 11

HDMI Connector Pin Assignment .......................................................................... 12

Limited Warranty ................................................................................................... 13

3

Basic understanding of the product

Cautions for safety

 All the safety and user manual should be read before the appliance is

operated.

 The safety and operating instructions should be retained for future reference.
 Unplug this product from the wall outlet before clean. Do not use liquid

cleaners or aerosol cleaners. Use a damp cloth for cleaning.

 Do not use this equipment near wet place.
 This product should be operated only from the type of power sources

indicated on the marking label. If you are not sure of the type of power
supplied to your home, consult your local power company. For equipment
intended to operate from battery power, or other source, refer to the user
manual.

 Do not use any damaged power cords or plugs, or outlets, this may cause

electrical shock or fire.

 Do not put heavy articles such as other equipment on this product.
 Keep it away from liquid, flammable substances.

If you experience any malfunctioning of product or have any question with
regard to operation of the product, please contact our customer service
center.

4

Description, General Specification

 HDMI Audio separator (DV-HAS) is designed to separate Video and 2ch

stereo Audio from the HDMI signal.

 Compact size and low power design
 DV-HAS easily sends HDMI full HD (1920x1080p) to the HDMI display to

Audio systems such as Audio Amps, Audio Mixers etc.

 HDCP Compliant

ITEM DESCRIPTION

Model Name DV-HAS
Input Signal HDMI (TMDS) Single Link

Output Signal Digital video (HDMI), Analog Audio (stereo)

Supports up to WUXGA (1920x1200 @ 60Hz)

Resolution

Receptacle

Support

Power Consumption

Dimension 3.54” x 4.05” x 0.98” (90 x 103 x 25 mm)

Weight 0.66 lbs. (0.30Kg)

480i/p , 720i/p , 1080i/p
DC 5V Power Jack

HDMI 19 Pin Female
Stereo RCA Jack

HDMI Ver 1.3
2 ch Audio

Min1.0 W Max 5 W
External Power - 5V Power Adapter (Included)

5

Environmental and Reliability Specifications

 Recommended environmental conditions for the operation are temperature

range of 50°– 104°F (10°C– 40°C), non-condensing humidity levels of
10%– 80%, and altitude ceiling of 9,840 feet (3,000 meters).

 Environmental limits for transportation are established as a temperature

range of -13°– 122°F (25°C to 60°C), non-condensing humidity levels from

5-95%, and an altitude ceiling of 49,200 feet (15,000 meter)

 Environmental limits for storage are established as a temperature range of

-13°– 122°F (-20°C to 45°C), non-condensing humidity levels from 5-95%,
and an altitude ceiling of 9,840 feet (3,000meters)

 The DV-HAS is expected to function for more than 50,000 hours of use at

90% confidence level. The device is tested to the identical standards for

testing LCD monitors.

6

Main Features

High Quality Picture - No Signal Loss and Digital Noise Free

Our DV-HAS is designed to deliver the highest quality picture preserving the native
resolutions of the video sources without any signal loss. At the same time, the
digital noise that may affect the picture quality will be eliminated. Due to the nature
of the digital signals and passing through multiple connections, it is important to
eliminate the digital noise and boost the signal strength to preserve/enhance the
video signal quality, which the DV-HAS does.

Compact and Practical Design

The DV-HAS is designed compactly and practically allowing customers more ease
and convenience

Great retrofit for existing systems

Without changing / upgrading / down-grading HDMI sources and displays

HDCP (High-bandwidth Digital Content Protection)

The DV-HAS fully supports HDCP. Currently, every digital video product sends
high resolution signal with HDCP. It will not display, if the products are not
compliant to HDCP standards.

Compliance to HDMI Version 1.3a

DV-HAS is fully compliant with the HDMI Ver 1.3a with deep color 36 bit

7

Video/ Audio Connections

Step 1: Confirm that the DV-HAS, digital video source and display are turned off.
Step 2: Connect the HDMI to HDMI cable from the DV-HAS HDMI output port to

the HDMI input port of the display.

Step 3: Connect the RCA to RCA stereo audio cable from the DV-HAS audio

output to the audio input of the display or external sound system.

Step 4: Connect the HDMI to HDMI cable from the DV-HAS HDMI input port to the

source’s HDMI output port.
Step 5: Connect power adapter to the DV-HAS.
Step 6: Turn on the display.
Step 7: Turn on the source.
NOTE: Due to delays inherent in the audio processing channels of most display

devices, the audio coming from the display will lag behind the DV-HAS audio
output by a significant amount of time (generally 16 to 32 milliseconds or longer). It
is not recommended to use audio originating from the display device and the DV­HAS in the same listening area.

EDID data saving

The EDID Default of the DV-HAS is set to 1080p @60Hz. If you want to change the
EDID data, please follow these steps:

Step 1: Connect the HDMI to HDMI cable from the DV-HAS output port to the
HDMI input of the display.

Step 2: Connect the power adapter to the DV-HAS power input,
Step 3: Turn on the display and push EDID switch for 2 to 3 seconds
Step 4: EDID LED is illuminated for about 2 second if EDID was saved correctly.

If EDID was not saved correctly, EDID LED blinks 5~6 times. Please try
again after checking the connection of cables and the power of display and
DV-HAS.
(EDID saving is to display the best resolution between the video source and
the display)

8

Caution: If your display supports multi-channel audio, you should set the display to

2 channel stereo audio manually.

If multi-channel audio is sent from the source to the DV-HAS, there will be
no output from the RCA jacks, but audio will be present on the unit’s
HDMI output.

NOTE: Audio output is active whether the Display is connected or not.

DV-HAS Typical Application

FSR DV-HAS

DVD PLAYER

(SOURCE)

5VDC

POWER SUPPLY

(INCLUDED)

HDMI AUDIO SEPARATOR

HDMI

IN

DC 5V

OUT

HDMI

RL

OUT

AUIDIO

NOTES: Audio output is active whether the Display is connected or not.

Due to delays inherent in the audio processing channels of most display
devices, the audio coming from the display will lag behind the DV-HAS
audio output by a significant amount of time (generally 16 to 32
milliseconds or longer). It is not recommended to use audio originating
from the display device and the DV-HAS in the same listening area.

DISPLAY

9

Technical Specification

Data transmission speed: 2.25 Gbps (Single Link)
Digital Video Bandwidth: 25~165 MHz
Resolution: Up to 1080p (1920*1080) @60Hz, PC up to 1920x1200 @60hz
Digital Audio 2 channel up to 96 KHz
Input/output signal standard: Digital RGB, TMDS, 2ch Audio
Input connector type: HDMI Female 19P
Output connector type: HDMI Female 19P / Stereo RCA JACK
Power consumption: 5 Watts Max.
Power supply: DC 5V, 2A

Front panel

DC 5V: DC 5V power input port
POWER LED: display the status of power
VIDEO LED: display the status of the signal input
HDMI In: HDMI Input port
EDID S/W: EDID SAVE operation switch
EDID LED: display the status of EDID operation

Rear panel

HDMI OUT: HDMI output port
AUDIO OUT: Analog audio (stereo) output port

10

Mechanical Dimensions

(2) .390 x .196 SLO T

EDID

FSR DV-HAS

EDID

S/W

HDMI IN

HDMI OUT

AUDIO OUT

LR

.14 - SUPPLIED/

ATTACHED

FEET HEIGH T

VIDEO

1.13

3.55

DC 5VPOWER

.99

2.03 2.03

4.06

3.94

11

HDMI Connector Pin Assignment

HDMI Input, Output
Part No. Pin No. Description Remarks

1 TMDS DATA 2+
2 TMDS DATA 2 Shield
3 TMDS DATA 2-
4 TMDS DATA 1+
5 TMDS DATA 1 Shield
6 TMDS DATA 1-
7 TMDS DATA 0+
8 TMDS DATA 0 Shield
9 TMDS DATA 0-

HDMI 19pin

10 TMDS Clock +
11 TMDS Clock Shield
12 TMDS Clock -
13 CEC
14 RESERVED
15 DDC Clock
16 DDC DATA
17 GND
18 +5v
19 Hot Plug Detect

12

Limited Warranty

The DV-HAS is warranted against failures due to defective parts or faulty workmanship for a period
of three years after delivery to the original owner. During this period, FSR will make any necessary
repairs or replace the unit without charge for parts or labor. Shipping charges to the factory or repair
station must be prepaid by the owner, return-shipping charges (via UPS Ground) will be paid by
FSR.

This warranty applies only to the original owner and is not transferable. In addition, it does not apply
to repairs done by other than the FSR factory or Authorized Repair Stations.

This warranty shall be cancelable by FSR at its sole discretion if the unit has been subjected to
physical abuse or has been modified in any way without written authorization from FSR. FSR’s
liability under this warranty is limited to repair or replacement of the defective unit.

FSR will not be responsible for incidental or consequential damages resulting from the use or
misuse of its products. Some states do not allow the exclusion of incidental or consequential
damages, so the above limitations may not apply to you. This warranty gives you specific legal
rights, and you may also have other rights which vary from state to state.

Warranty claims should be accompanied by a copy of the original purchase invoice showing the
purchase date (if a Warranty Registration Card was mailed in at the time of purchase, this is not
necessary). Before returning any equipment for repair, please read the important information on
service below.

SERVICE
Before returning any equipment for repair, please be sure that it is adequately packed and

cushioned against damage in shipment, and that it is insured. We suggest that you save the original
packaging and use it to ship the product for servicing. Also, please enclose a note giving your name,
address, phone number and a description of the problem.

NOTE: all equipment being returned for repair must have a Return authorization (RMA) Number. To
get a RMA Number, please call the FSR Service Department (1-800-332-FSR1). Please display your
RMA Number prominently on the front of all packages.

CONTACT INFORMATION

244 Bergen Blvd.

Woodland Park, NJ 07424

Phone: [phone]

*Order Desk Fax: [phone]

E-mail: [e-mail]

Web Site: http://www.fsrinc.com

13