FSR CB-BRK-1G User Manual

FSR

CB-BRK-1G/2G/6IPS/12IPS ACCESSORY INTERNAL BRACKET INSTALLATION INSTRUCTIONS

244 Bergen Boulevard, Woodland Park, NJ 07424, Phone: [phone] - Fax: [phone]

1.

INSTALLATION AND WIRING OF ELECTRONIC
DEVICES ONTO THE ACCESSORY INTERNAL
BRACKET MAY BE DONE BEFORE OR AFTER
SECURING BRACKET INTO CEILING BOX.

2.

SECURE ACCESSORY INTERNAL BRACKET TO
CEILING BOX WITH SUPPLIED HARDWARE AS
SHOWN. BRACKET LOCATION TO BE
DETERMINED BY CUSTOMER/ELECTRICAIN.
BRACKET CAN BE MOUNTED USING FACTORY
PILOT HOLES OR BY ADDING ADDITIONAL
HOLES.

3.

SECURE WIRING AS REQUIRED WITH WIRE
SADDLES OR CABLE TIES ONTO ACCESSORY
INTERNAL BRACKET AS SHOWN.

(2) #7-16 NEEDLE-POINT SCREW

ACCESSORY INTERNAL BRACKET
(CB-BRK-1G SHOWN)

SNAP WIRE SADDLES IN
PLACE OR USE CABLE
TIES AS REQ U I RED TO
SECURE ANY WIRING.

LOCATE ACCESSORY INTERNAL
BRACKET AS REQUIRED OR
USE EXISTING PILOT HOLES

CABLE TIE

OR

WIRE
SADDLE

CARRIAGE SHOWN IN "DOWN" POSITION
TO ILLUSTRATE BRACKET INSTALLATION
AND PILOT HOLES

44033 LIT1377