Frymaster FPRE214, FPRE314, FPRE414, FPRE514, FPRE614 General Manual
...
™
®
Frymaster
FootPrint PRO® Filtration
System for Electric Fryers
Models
FMRE114*
FPRE214
FPRE314
FPRE414
FPRE514
FPRE614
FMRE117*
FPRE217
FPRE317
FPRE417
Standard Features
• Rail-mounted Teflon glides allow
for easy handling of largecapacity filter pan
• Filter pan designed on rails to
clear floormats and
accommodate uneven floor
environments
• Ample under-fryer cleaning
space when filter pan is removed
• Sloped drain pan leaves minimal
oil residue behind after filtering
• Large 3-inch round drain line
allows for rapid drainage without
clogging
• 1/3 H.P. motor
• 4 GPM pump
• Stainless steel crumb catcher
FPRE517
FPRE617
FMRE122*
FPRE222
FPRE322
• 1 box of 25 prepackaged
applications of Filter Magic©
powder
• 1 box of 25 sheets Filter Magic©
paper
Options &
Accessories
Project
Item
Quantity
CSI Section 11400
Approval
Date
FPRE422
FPRE522
FPRE622
*Includes
spreader cabinet
External oil discharge -- MUST
be ordered when equipment
order is placed. Specify rear or
front disposal
See individual fryer
specification sheets for fryer
options
FootPrint PRO Filtration System for Electric Fryers
FPRE214
Specifications
Designed to support good oil station
management and maximize oil life
Frymaster’s renowned, patented built-in FootPrint
PRO Filtration System puts filtration where it’s
most convenient to use -- right within the fryer
battery -- eliminating the need for additional
floor and storage space.
The filtering process is:
Easy to operate utilizing just two handles. The
red handle opens and closes the drain valve,
and the yellow handle turns the filter pump on
and off. Flush features help remove sediment
and return filtered oil to the frypot. Elevated
filter pan ensures no problem with uneven
floors.
Quick. The entire filtering process occurs
within a matter of minutes. Large sump with a
8700 Line Avenue
Shreveport, LA 71106-6800
USA
Tel: 318-865-1711
Tel: 1-800-221-4583
Fax: 318-868-5987
E-mail: info@frymaster.com
secure hold-down ring ensures proper vacuum
for rapid oil circulation.
Convenient. Everything needed for filtration is
built-in for easy operator access. No need to
attach a drain spout or handle a hot hose.
This system is enhanced with a gravity draining
system that allows residual oil to drain into the
filter pan so that drain lines are always open. The
filter, housed beneath two FootPrint-ready
electric fryers or one fryer and a spreader, is
capable of filtering up to six fryers, individually,
without having to be moved from fryer to fryer,
saving valuable labor. One fifty-pound fryer can
be filtered in about four minutes, while other
fryers in the battery continue cooking.
www.frymaster.com
Bulletin No. 818-0434 5/09
All Models are
E-Star compliant.
FootPrint PRO Filtration System for Electric Fryers
36.6
[929]
34.9
[885]
30.9
[786]
17.9
[455]
19.4
[492]
8.3
[212]
48.2
[1225]
2.5
[64]
23.7
[603]
50.9
[1294]
DRAIN
HEIGHT
18.7
[475]
53.7
[1364]
OPTIONAL
BASKET LIFT IN
RAISED POSITION
SIDE VIEW FRYERS FRONT VIEW SIDE VIEW SPREADER
TOP VIEW
45.4
[1152]
TOP OF
HOUSING
11.8
[299]
17.5
[445]
BACK VIEW
48.4
[1231]
FILTER PAN
ROLLED OUT
W/O BASKET LIFT
52.4
[1330]
FILTER PAN
ROLLED OUT
W/ BASKET LIFT
OPTIONAL FOODWARMER
CORDSET 120V
6 FT.
2.7 [68]
CORDSET LOCATION
14.0 [357]
CORDSET
LOCATION
28.6 [725]
CORDSET LOCATION
15.6
[397]
31.3
[794]
46.9
[1192]
™
Frymaster
®
DIMENSIONS -- INCHES (mm)
MODEL NO.
FPP
214, 217, 222 8.85”
314, 317, 322 8.85”
414, 417, 422 8.85”
514, 517, 522 8.85”
614, 617, 622 8.85”
(225 mm)
(225 mm)
(225 mm)
(225 mm)
(225 mm)
POWER REQUIREMENTS FOR FILTER ONLY
Supply voltage for filter is obtained from the line voltage of
fryers, except for 480V and 440V, which will have a separate
120V 60 Hz (9.0 AMP) supply cord supplied with the unit.
Export -- Supply voltage 230/240V 50 Hz (4.5 AMP).
Filter Motor -- 120V motor (9.0 AMP) used on 480V units. 240V
60 Hz (4.5 AMP).
8700 Line Avenue
Shreveport, LA 71106-6800
USA
We reserve the right to change specifications appearing in this bulletin without incurring any obligation for equipment previously or subsequently sold.
Check www.frymaster.com
HEIGHT WIDTH LENGTH CLASS CUBE H W L
FPP FILTER ONLY FPP FILTER WITH FRYERS
SIZE DRAIN
18.7”
(475 mm)
18.7”
(475 mm)
18.7”
(475 mm)
18.7”
(475 mm)
18.7”
(475 mm)
23.94”
(608 mm)
23.94”
(608 mm)
23.94”
(608 mm)
23.94”
(608 mm)
23.94”
(608 mm)
Tel: 318-865-1711
HEIGHT
(356 mm)
(356 mm)
(356 mm)
(356 mm)
(356 mm)
Tel: 1-800-221-4583
Fax: 318-868-5987
E-mail: info@frymaster.com
14.0”
14.0”
14.0”
14.0”
14.0”
NET
WEIGHT
65 lbs.
(30 kg)
65 lbs.
(30 kg)
65 lbs.
(30 kg)
65 lbs.
(30 kg)
65 lbs.
(30 kg)
UNIT
WEIGHT
490 lbs.
(223 kg)
570 lbs.
(259 kg)
663 lbs.
(302 kg)
783 lbs.
(356 kg)
2@ 570 lbs.
(259 kg)
SHIPPING
WEIGHT
552 lbs.
(251 kg)
618 lbs.
(281 kg)
780 lbs.
(355 kg)
838 lbs.
(381 kg)
2@ 618 lbs.
(281 kg)
www.frymaster.com
Bulletin No. 818-0434 5/09
Litho in U.S.A. ©Frymaster
85 51.86 53”
77.5 74.39 54”
77.5 100.12 54”
77.5 120.98 54”
77.5 2@ 74.39 2@ 54”
SHIPPING INFORMATION
(1346 mm)
(1372 mm)
(1372 mm)
(1372 mm)
(1372 mm)
NOTES:
Batteries of more than 5 fryers
38”
(965 mm)
53.50”
(1359 mm)
72”
(1829 mm)
87”
(2210 mm)
2@ 53.50”
(1359 mm)
(1118 mm)
(1130 mm)
(1130 mm)
(1130 mm)
(1130 mm)
must ship in 2 crates.
FOR FRYER SPECIFICATIONS,
FEATURES, AND OPTIONS, SEE
COMBINED ELECTRIC SPEC SHEET.
Lift handle not available on 22kW
split pot element assembly.
44.50”
44.50”
44.50”
2@ 44.50”
44”
Model#___________
CSI Section 11400
Loading...