Frymaster BIRE14 Parts Diagram

BIRE14/MRE14 SERIES E4 ELECTRIC FRYERS

2.1 Accessories

CHAPTER 2: PARTS LIST

ITEM

PART #

COMPONENT

1 809-0171 Thumbscrew, ¼ -20 X 1⅜-inch 2 810-2793 Hanger, Wireform Basket * 809-0921 Spacer, Basket Hanger 3 803-0197 Cleanout Rod, 27-inch 4 803-0209 Brush, Frypot 5 823-5772 Connecting Strip, Frypot 6 806-3068 Cover, Full-Vat Frypot * 806-3071 Cover, Dual-Vat Frypot 7 803-0099 Basket, Full-Vat 8 803-0271 Basket, Dual-Vat (Twin) 9 803-0122 Sediment Tray, Left Dual-Vat * 803-0123 Sediment Tray, Right Dual-Vat

* 803-0113 Sediment Tray, Full-Vat 10 803-0132 Rack, Full-Vat Basket Support 11 803-0106 Rack, Dual-Vat Basket Support

* 803-0002 Powder, Filter (80- 1-Cup Applications)

* 803-0046 Cup, Plastic Measuring

* 803-0170 Pack, 100-Sheet Filter Paper

*Not illustrated.

2-1

2.2 Cabinetry

2.2.1 Back Panels, Control Panel Frames, Doors, Sides, Tilt Housings, and Top Caps

1110

2-2

2.2.1 Back Panels, Control Panel Frames, Doors, Sides, Tilt Housings, and Top Caps

ITEM PART # COMPONENT

1 Back Panel, Upper (Panel for five station fryer shown)

220-0421 Single Station Fryer 220-0419 Two Station Fryer 220-0423 Three Station Fryer 220-0425 Four Station Fryer 220-0611 Five Station Fryer

2 Back Panel, Center (Panel for five station fryer shown)

220-0501 Single Station Fryer 220-0487 Two Station Fryer 220-0491 Three Station Fryer 220-0499 Four Station Fryer 220-0616 Five Station Fryer

3 Frame, Control Panel (Frame for five station fryer shown)

106-5016 Single Station Fryer 106-5221 Two Station Fryer 106-5018 Three Station Fryer 106-5019 Four Station Fryer 106-5020 Five Station Fryer

4 Tilt Housing (Housing for five station fryer shown)

823-5402 Single Station, S/S (use 823-5564 for Aluminized Steel) 823-5360 Two Station, S/S (use 823-5570 for Aluminized Steel) 823-5492 Three Station, S/S (use 823-5573 for Aluminized Steel) 823-5576 Four Station, S/S (use 823-5577 for Aluminized Steel) 823-5578 Five Station, S/S (use 823-5579 for Aluminized Steel)

5 Top Cap (Top cap for five station fryer shown)

106-5195 Single Station (Also requires four 809-0078 10-32 Nutserts) 106-5196 Two Station (Also requires four 809-0078 10-32 Nutserts) 106-5197 Three Station (Also requires six 809-0078 10-32 Nutserts) 106-5198 Four Station (Also requires eight 809-0078 10-32 Nutserts) 106-5199 Five Station (Also requires ten 809-0078 10-32 Nutserts)

* 200-9614 Heat Shield Single Station

* 200-9610 Two Station (Two are used on Four Station) (One used on Five station)

* 200-9611 Three Station (One used on Five Station)

6 Cap-N-Splash

823-5715 Single Station 823-5708 Two Station 823-5706 Three Station 823-5710 Four Station

823-5713 Five Station 7L 231-0323 Side, Standard Cabinet Left SS (use 221-0323 for Enameled Steel) 7R 232-0323 Side, Standard Cabinet Right SS (use 222-0323 for Enameled Steel)

8 810-1105 Magnet, Door

9 106-4397 Door, Left or Right (Left shown – move handle to bottom for right) 10 809-0266 Screw, #10 X ½-inch Phillips Truss Head 11 210-9739 Handle, Eurolook Door 12 106-4067 Pin Assembly, Door

* 810-0275 Spring, Door Pin

* 809-0970 Retaining Ring 13 823-5440 Cove, Element Tilt Housing 14 210-5046 Bezel, One-Controller 15 210-5623 Bezel, Blank 16 210-5819 Bezel, Two-Controller 17 210-6698 Bezel, Three-Controller

* Not illustrated.

2-3

2.2.2 Cabinets, Bases, Braces, and Associated Parts

See Page 2-34 for rear bridge support/oil return manifold.

See Page 2-28 for filter rails and associated hardware.

2-4

2.2.2 Cabinets, Bases, Braces, and Associated Parts cont.

ITEM PART # COMPONENT

1 106-3828 Upright Assembly, Left 2 106-3829 Upright Assembly, Right 3 200-1651 Support, Cross Cabinet 4 200-1659 Divider, Cabinet 5 200-2293 Brace, Single Station Lower 6 200-3774 Brace, Double Station Lower 7 Brace, Front Horizontal

200-7036 Single-Station Fryer (use 220-0624 for Single-Station Lower Brace)

200-7037 Two-Station Fryer 200-7038 Three-Station Fryer 200-7039 Four-Station Fryer 200-7040 Five-Station Fryer

8 Brace, Rear Horizontal

200-5356 Single-Station Fryer 200-2284 Two-Station Fryer 200-2295 Three-Station Fryer 200-2725 Four-Station Fryer 200-3592 Five-Station Fryer

9 231-0323 Side, Cabinet LH S/S (use 221-0323 for CRS)

10 232-0323 Side, Cabinet RH S/S (use 222-0323 for CRS)

11 220-1100 Support, RE Bottom Contactor Box

12 220-1095 Support, RE Rear Contactor Box

13 220-1093 Brace, RE Front Contactor Box

* 220-1294 Brace, Contactor Box Single-Station Fryer Front 14 222-0610 Bracket, RH Contactor Box Mount 15 221-0610 Bracket, LH Contactor Box Mount

* 200-6498 Bridge, Contactor Box Single-Station Fryer 16 200-4424 Post, Door 17 810-2346 Magnet, Door 18 200-4786 Support, Oil Return Manifold 19 210-6862 Hinge, Door 20 824-1393 Bracket, Rear Support 21 824-4557 Channel, Base Side

* 222-0621 Channel, Base Right Side Single-Station Fryer

* 221-0621 Channel, Base Left Side Single-Station Fryer

22 809-0131 Bolt, ¼-20 X ¾-inch Hex Head (also used w/Item 27 to mount filter rails)

23 810-0326 Caster with Brake 24 810-1494 Caster without Brake 25 826-1376 Nut, 10-32 Keps Hex (Pkg. of 10)

26 826-1374 Screw, #10 X ½-inch Hex Washer Head (primary cabinet screw)(Pkg. of 25)

27 809-0417 Nut, ¼-20 Hex Flange 28 809-0429 Bolt, ¼-20 X 2-inch Hex Head 29 200-5417 Brace, Rear Channel Corner 30 Channel, Base Rear

823-5589 Single-Station Fryer Base 823-4558 Two-Station Fryer 823-4560 Three-Station Fryer 823-4561 Four-Station Fryer

823-4562 Five-Station Fryer * 810-3010 Leg, Single Fryer Single-Station Fryer * 824-1705 Bridge, Pump/Motor Single-Station Fryer * 809-0495 Nut, ¼” – 20 Press

* Not illustrated.

2-5

2.3 Drain System Components

2.3.1 Drain Tube Sections and Associated Parts

See next section for Drain Valves

2-6

2.3.1 Drain Tube Sections and Associated Parts cont.

ITEM PART# COMPONENT

1 Drain Tube, Left/Right End Short

823-4625 Full-Vat 823-4624 Dual-Vat

2 Drain Tube, Left/Right Open Short

823-4643 Full-Vat 823-4642 Dual-Vat

3 Drain Tube, Right End Long

823-4639 Full-Vat 823-4638 Dual-Vat

4 Drain Tube, Left/Right Open Long

823-4641 Full-Vat

823-4640 Dual-Vat 5 823-4892 Drain Outlet 6 816-0625 Sleeve 7 809-0969 Clamp * 816-0630 Vinyl Cap 8 810-2492 Fitting, Quick-Connect Straight (receives Teflon vent tube) * KIT6033 Kit, Round Drain Clamp (contains 2 of Item 7 and 1 of Item 6) * 811-1071 Tube, Teflon Vent (sold by the foot)

* Not illustrated.

2-7

2.3.2 Drain Valves and Associated Parts (Units with Built-In Filtration)

Single Footprint Full-Vat

Drain Valve Assembly

106-6300

2.3.2 Drain Valves and Associated Parts (Units with Built-In Filtration) cont.

ITEM PART # COMPONENT

1 809-0540 Nut, ½-13 2-Way Hex Lock 2 900-2936 Retainer, Full-Vat Nut Drain Valve 3 824-1602 Handle, Full-Vat Drain Valve 4 816-0639 Cap, Red Handle 5 809-0237 Nut, 4-40 Keps Hex 6 901-2348 Cover, Dual Vat Drain Safety Switch 7 807-2103 Microswitch, CE Straight Lever 8 816-0220 Insulation, Drain Safety Switch 9 106-5391 Bracket Assembly, Full-Vat Drain Safety Switch Single Footprint Only

10 810-1018 Valve, 1.25-inch Full-Vat Drain Single FP

2-8

2.3.2 Drain Valves and Associated Parts (Units with Built-In Filtration) cont.

ITEM PART # COMPONENT

1 809-0540 Nut, ½-13 2-Way Hex Lock 2 900-2936 Retainer, Full-Vat Drain Valve Nut 3 824-1602 Handle, Full-Vat Drain Valve 4 816-0639 Cap, Red Handle 5 809-0237 Nut, 4-40 Keps Hex 6 901-2348 Cover, Dual Vat Drain Safety Switch 7 807-2103 Microswitch, CE Straight Lever 8 816-0220 Insulation, Drain Safety Switch

9 810-1165 Washer, Teflon Drain Valve 10 200-6496 Support, 3” Drain 11 806-8137 Bracket Assembly, Full-Vat Drain Safety Switch 12 810-1018 Valve, 1.25-inch Full-Vat Drain 13 816-0135 Round Drain O-Ring

2-9

2.3.2 Drain Valves and Associated Parts (Units with Built-In Filtration)

2-10

2.3.2 Drain Valves and Associated Parts (Units with Built-In Filtration) cont.

ITEM PART # COMPONENT

1 816-0639 Cap, Drain Handle

2 809-0539 Nut, ⅜-16 2-Way Hex Lock

3 900-2934 Retainer, Dual-Vat Drain Valve Nut 4a 824-1636 Handle, Dual-Vat Right Drain Valve 4b 824-1637 Handle, Dual-Vat Left Drain Valve

5 809-0237 Nut, 4-40 Keps Hex

6 901-2348 Cover, Dual Vat Drain Safety Switch

7 807-2103 Microswitch, CE Straight Lever

8 816-0220 Insulation, Drain Safety Switch

9 810-1165 Washer, Teflon Drain Valve 10 809-0196 Washer, ⅜-inch Flat 11 106-2671 Bracket Assembly, Dual-Vat Drain Safety Switch

106-6304 Bracket Assembly, Dual-Vat Drain Safety Switch Single Footprint Only 12 810-1114 Valve, 1-inch Dual-Vat Drain 13 816-0135 Round Drain O-Ring

* 823-5592 Tube, Drain Single-Station Only with Filter

*Not illustrated.

2-11

2.3.3 Drain Valves and Associated Parts (Units without Built-In Filtration)

ITEM

PART # COMPONENT

1 810-1569 Valve, 1.25-inch Non-Filter Full-Vat Drain 2 806-7915SP Valve, 1-inch Non-Filter Dual-Vat Left Drain 3 806-7916SP Valve, 1-inch Non-Filter Dual-Vat Right Drain 4 812-1226 Drain Extension, 1.25-inch 5 812-1227 Drain Extension, 1-inch

2-12

+ 26 hidden pages