Frymaster BIPH252 Parts List

BIPH52/55-MPH52/55 GAS FRYERS

CHAPTER 2: PARTS LIST

2.1 Accessories

6

1

8

10

11

7

9

3

12

13

16

ITEM PART # COMPONENT

1 803-0271 Basket, Twin 2 803-0099 Basket, Full (cannot be used with basket lifts) 3 803-0133 Basket Support Rack, Dual Vat 4 803-0132 Basket Support Rack, Full Vat * 803-0136 Basket Support Screen, Full Vat (screen w/handle used in place of Item 4) 5 Coupling, Gas Line Female Quick Disconnect

810-0070 ¾-inch

810-0073 1-inch 6 803-0197 Cleanout Rod, 27-inch (Fryer's Friend) 7 803-0209 Brush, Frypot 8 806-3407 Cover, Frypot, Dual Vat 9 806-3068 Cover, Frypot, Full Vat * 826-0993SP Handle Kit, Frypot Cover (includes handle and screws)

10 910-7443 Connecting Strip, Frypot 11 810-0478 Gas Line, 1-Inch Dormont Flexible

806-1698SP 36-Inch (for gas line only (w/o Items 12 and 13), use 810-0088)

806-1699 48-Inch (for gas line only (w/o Items 12 and 13), use 810-0085)

12 810-0074 Quick-Disconnect Fitting, 1-Inch Male 13 810-0073 Quick-Disconnect Fitting, 1-Inch Female 14 810-2793 Hanger, Basket 15 809-0171 Thumbscrew, ¼-20 X 1⅜-inch Basket Hanger

* 809-0921 Spacer, Basket Hanger

16 826-0900 Kit, Chain Restraint 17 826-1045 Bushing, Flexible Gas Line (813-0032)

15

2

4

17

18

19

14

5

2-1

ITEM PART # COMPONENT

18 812-1378 Drain Extension, Non-Filter Full Vat Fryer 19 812-1374 Drain Extension, Non-Filter Dual Vat Fryer

* 803-0219 Pad, McDonald’s FPIII Universal Filter * 803-0170 Filter Pack, Paper – 100 Sheets * 803-0002 Powder, Filter – 80 Packages * 826-1157 Kit, Fuse and Fuse Puller (2 Fuses)

* Not illustrated.

2-2

2.2 Cabinetry

2.2.1 Backs, Doors, Flue Caps, Sides, Top Caps, Standoffs and Cap-N-Splash Assemblies

18

1

17

2

5

9

8

7

4

13

1211

3

20

15

6

22

14

23

9

25

24

16

10

21

19

2-3

r

)

t

p

)

r

t

)

f

ITEM PART # COMPONENT

1 Back, Single Uppe

210-6581 Stainless Steel 200-6581 Cold Rolled Steel

2 Back, Single Lowe

210-6580 Stainless Steel 200-6580 Cold Rolled Steel

3 Back, Double Upper (for 2-, 4-, and 5-station fryers – does not include Items 7-9

210-6542 Stainless Steel 200-6540 Cold Rolled Steel

4 Back, Double Lower (for 2-, 4-, and 5-station fryers – does not include Items 7-9

210-6541 Stainless Steel 200-6539 Cold Rolled Steel

5 Back, Triple Upper (for 3- and 5-station fryers – does not include Items 7-9

210-6545 Stainless Steel 200-6547 Cold Rolled Steel

6 Back, Triple Lower (for 3- and 5-station fryers – does not include Items 7-9

210-6544 Stainless Steel

200-6546 Cold Rolled Steel 7 200-6419 Clip, Flue Suppor 8 200-5865 Support, Flue Ca 9 826-1374 Screw, #10 X ½-inch Hex Washer Head (Pkg. of 25

10 106-3966 Door, Left or Right (Left shown – move handle to bottom for Right) 11 809-0266 Screw, #10 X ½-inch Phillips Truss Head 12 210-6816 Handle, Door 13 823-4729 Hinge, Left Door Uppe 14 823-4730 Hinge, Right Door Uppe 15 Flue Cap-Stainless Steel (Does not include Item 27)

210-5549 Single Fryer

106-3579 2-Station Frye

106-3537 3-Station Frye

106-3535 4-Station Fryer

106-3536 5-Station Fryer

16 Flue Cap - Aluminized Steel for use with Cap-N-Splash

210-5525 Single Fryer

106-3539 2-Station Frye

106-3540 3-Station Frye

106-3542 4-Station Frye

106-3543 5-Station Frye

17 Side, Left Standard Cabine

211-6510SP Stainless Steel

201-6633 Enameled Steel

18 Side, Right Standard Cabine

212-6510SP Stainless Steel

202-6633 Enameled Steel

19 Top Cap (Cap for 5-staion fryer shown

824-1310 Single Fryer (use 824-1689

824-1357 2-Station Fryer (use 824-1690

823-4702 3-Station Fryer (use 823-5733

823-4704 4-Station Fryer (use 824-5734

823-4706 5-Station Fryer (use 824-5735

or fryers mfd. After 3.15.06)

or fryers mfd. After 3.15.06) or fryers mfd. After 3.15.06) or fryers mfd. After 3.15.06) or fryers mfd. After 3.15.06)

2-4

ITEM PART # COMPONENT

20 Standoffs

200-6582 Single Fryer 200-6553 2-Station Fryer 200-6554 3-Station Fryer 200-6555 4-Station Fryer 200-6556 5-Station Fryer

21 Cap-N-Splash Assemblies

823-3066 Single Fryer 823-3067 2-Station Fryer 823-3068 3-Station Fryer 823-3070 4-Station Fryer

823-3069 5-Station Fryer 22 826-1351 Nut Retainer, ¼-20 (Pkg. of 10 – for basket hanger thumbscrew) for Std. Fluecap 23 809-0171

24 809-0402 Thumbscrew, ¼-20 x ½-inch (for use on Cap-N-Splash Assembly) 25 809-0535 T-Nut, ¼-20 x 7/16-inch (for use on Cap-N-Splash Assembly)

Thumbscrew, ¼-20 x

1⅜-inch (for use on Standard Fluecap)

2-5

2.2.2 Filter Cabinet Bases, Casters, Framing, and Related Components

The 5-station cabinet illustrated is typical of all BIPH52/55 Series Gas filter cabinets. All base and framing components used in BIPH52/55 Gas filter cabinets are identified, but not all components are used in every configuration.

1

2

11

15

31

34

10

3

5

4

7

9

12

6

8

19

37

36

35

14

All cabinet screws, unless otherwise

17

16

18

34

20

23

22

13

21

31

27

indicated, are #10 x 1/2-inch Hex Washer Head P/N 826-1374, sold in packages of 25.

25

Not shown is the Base Shield

P/N 200-6036

24

26

25

28

See Page 2-4 for upper hinges.

29

NOTE: 2- and 3-station fryers have 4 casters; 4- and 5-station fryers have 6.

30 32 33

333231

2-6

ITEM PART # COMPONENT

1 106-4303 Frame, Control Panel, Two Station, (use 106-5221SP mfd. After 3.15.06)

106-4304 Three-Station, Standard (use 106-5018SP mfd. After 3.15.06) 106-4305 Four-Station, Standard (use 106-5019 mfd. After 3.15.06) 106-4306 Five-Station, Standard (use 106-5020 mfd. After 3.15.06)

2 210-5819 Bezel, Two-Controller 3 210-6698 Bezel, Three-Controller 4 210-5046 Bezel, One-Controller 5 210-5623 Bezel, Blank 6 900-7730 Brace, Cabinet Top Two-Station

900-9430 Three-Station 900-9318 Four-Station

200-5474 Five-Station 7 200-5478 Divider, Cabinet 8 200-9217 Post, Cabinet Front 9 200-6031 Post, Filter Door

10 200-2235 Bracket, Component Box Support 11 200-6550 Post, Cabinet Rear 12 200-1953 Brace, Front Cabinet 13 200-6507 Support, Cross Cabinet 14 810-1105 Magnet, Door 15 Manifold, Rear (for units w/ filtration also see page 2-17 for additional parts)

810-2890 Two-Station

810-2891 Three-Station

810-2892 Four-Station

810-2893 Five-Station

16 200-2213 Bracket, Rear Bridge Support 17 200-9818 Bridge, Filter Pump 18 200-6326 Gusset, Left Rear Corner 19 200-7031 Gusset, Right Rear Corner 20 201-9467 Support, Left Filter Rail 21 202-9467 Support, Right Filter Rail 22 823-4651 Slide, Filter Pan Lid Left 23 823-4652 Slide, Filter Pan Lid Right 24 200-2102 Brace, Side Channel 25 823-4653 Channel, Side Base 26 Channel, Front Base (not used in two-station fryers)

200-6609 Three-Station

200-6610 Four-Station

200-5473 Five-Station

27 823-4510 Channel, Rear Base Two-Station

823-4630 Three-Station

823-4629 Four-Station

823-4628 Five-Station

28 823-4732 Hinge, Lower Left 29 823-4733

Hinge, Lower Right (attach to Hinge Bracket 200-5478 in 4- & 5-station fryers)

30 810-0944 Caster w/Brake, 8½ to 10-inch Adjustable (3-inch wheel) 31 810-0327 Caster w/o Brake, 8½ to 10-inch Adjustable (4-inch wheel) 32 809-0953 Bolt, ¼-20 x ¾-inch Hex Head 33 809-0191 Washer, ¼-inch Lock 34 809-0417 Nut, ¼-20 Flange 35 201-6720 Mount, Rear Flush Rod Offset, Left 36 200-6697 Mount, Rear Flush Rod Holder, Center 37 202-6720 Mount, Rear Flush Rod Offset, Right

* 200-6036 Base Shield

2-7

2.2.3 Non-Filter Cabinet Bases, Casters, Framing, and Related Components

The 5-station cabinet illustrated is typical of all MPH52/55 Series Gas non-filter cabinets. All base and framing components used in MPH52/55 Series Gas non-filter cabinets are identified, but not all components are used in every configuration.

3

1

2

10

22

14

2

6

7

8

11

13

All cabinet screws,

5

unless otherwise indicated, are #10 x 1/2inch Hex Washer Head P/N 826-1374, sold in packages of 25.

24

17

12

15

18

See Page 2-4 for upper hinges.

19

NOTE: 2- and 3-station fryers have 4 casters; 4- and 5-station fryers have 6.

232221

20 22 23

2-8

ITEM PART # COMPONENT

1 Frame, Control Panel

106-4302 Single-Station, Standard (use 106-5016 mfd. After 3.15.06) 106-4303 Two-Station, Standard (use 106-5221SP mfd. After 3.15.06) 106-4304 Three-Station, Standard (use 106-55018SP mfd. After 3.15.06) 106-4305 Four-Station, Standard (use 106-5019 mfd. After 3.15.06)

106-4306 Five-Station, Standard (use 106-5020 mfd. After 3.15.06) 2 210-5819 Bezel, Two-Controller 3 210-6698 Bezel, Three-Controller 4 210-5046 Bezel, One-Controller 5 210-5623 Bezel, Blank 6 Brace, Cabinet Top

200-5498 Single Fryer

900-7730 Two-Station

900-9430 Three-Station

900-9318 Four-Station

200-5474 Five-Station 7 200-5478 Divider, Cabinet 8 200-6614 Post, Cabinet Front 9 200-2235 Bracket, Component Box Support

10 200-6550 Post, Cabinet Rear 11 200-1953 Brace, Front Cabinet 12 200-6507 Support, Cross Cabinet 13 810-1105 Magnet, Door 14 Manifold, Rear (not present in single fryers)

823-3223 Two-Station

823-4691 Three-Station

823-4693 Four-Station

823-4694 Five-Station

15 823-4653 Channel, Side Base 16 Channel, Front Base

200-6616

200-6623

200-6624

Single Fryer (also used as rear base channel in single-station fryers) Two-Station (also used as rear base channel in single-station fryers) Three-Station (also used as rear base channel in single-station fryers)

200-6625 Four-Station

200-6627 Five-Station

17 Channel, Rear Base

200-6626 Four-Station

200-6628 Five-Station

18 823-4732 Hinge, Lower Left 19 823-4733

Hinge, Lower Right (attach to Bracket 200-5478 in 3-, 4-, & 5-station fryers)

20 810-0944 Caster w/Brake, 8½ to 10-inch Adjustable (3-inch wheel) 21 810-0327 Caster w/o Brake, 8½ to 10-inch Adjustable (4-inch wheel) 22 809-0953 Bolt, ¼-20 x ¾-inch Hex Head 23 809-0191 Washer, ¼-inch Lock 24 809-0417 Nut, ¼-20 Flange

2-9

2.3 Controllers and Associated Components

1

1 1 2

2

1234567890

ABC DEF GHI JKL MNO PQR STU VWX

JC

YZ

-

*

ITEM PART # COMPONENT

1 Computer, McDonald’s M2000 Gas Fryer

106-1269 Full Vat (Domestic U.S.) Can also be programmed for Dual Vat. 106-0672 Full Vat (CE) Can also be programmed for Dual Vat. 106-5950

Full Vat (CE) Can also be programmed for Dual Vat (Australia Only)

* 807-3520 M2000 Speaker

* Not illustrated.

2-10

2.4 Drain, Filtration, and Oil Return System Components

2.4.1 Filtration System Components

15

21

27

12

8

7

6

11

10

See Page 2-13

7

9

5

22

26

24

25

17

16

15

14

13

20

19

18

4

3

2

1

2-11