Frymaster BIH152 Parts List

4.1 Accessories

CHAPTER 4: PARTS LIST

ITEM PART # COMPONENT

1 803-0209 Brush, Frypot Cleaning 2 803-0197 Fryer’s Friend 27" (Clean-out Rod) 3 806-3068 Cover, Full-Vat Frypot 4 806-3407 Cover, Dual-Vat Frypot * 826-0993SP Kit, Replacement Cover Handle 5 803-0132 Rack, Full-Vat Basket Support 6 803-0133 Rack, Dual-Vat Basket Support 8 826-0900 Kit, Chain Restraint 7 910-7443 Top Connecting Strip 9 Coupling, Gas Line Female Quick-Disconnect

810-0070 ¾-inch 810-0073 1-inch

* 810-0478 Gas Line, Flexible, with Cut-Off Valve 10 813-0032 Bushing, Flexible Gas Line 11 812-1378 Drain Extension, Non-Filter Full Vat Fryer 12 812-1374 Drain Extension, Non-Filter Dual Vat Fryer

* 803-0271 Basket, Twin

* 826-1157 Kit, Fuse and Fuse Puller

* 803-0002 Powder, Filter – Approximately 100 Cups

* 803-0046 Cup, Plastic Filter Powder Measuring

* 803-0170 Filter Pack – 100 Sheets

* Not illustrated.

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

4-1

4.2 Cabinetry Components

4.2 .1 BIH152 and MH152 Cabinet Components

BIH152

MH152

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

4-2

4.2.1 BIH152 and MH152 Cabinet Components cont.

ITEM PART # COMPONENT

1 911-7688SP Side, BIH52 Left

2 912-7688SP Side, BIH52 Right

3 900-5521 Back, BIH152 Upper

4 900-5670 Back, BIH152 Lower

5 Side, MH52 Left

911-7036SP Before 6 Nov 2000 911-7688SP After 5 Nov 2000

6 Side, MH52 Right

912-7036SP Before 6 Nov 2000 912-7688SP After 5 Nov 2000

7 Back, MH152 Lower

900-2654 Before 6 Nov 2000 900-5670 After 5 Nov 2000

8 Back, MH152 Upper

900-2410 Before 6 Nov 2000 900-5521 After 5 Nov 2000

9 900-4180 Brace, BIH152/MH152 Top 10 900-5519 Brace, BIH152 Rear (and MH152 after 5 Nov 2000) 11 Channel, MH52 Cabinet Base Left and Right Side

900-7035 Before 6 Nov 2000

900-7687 After 5 Nov 2000 12 901-5526 Channel, BIH152 Base Left Side 13 902-5526 Channel, BIH152 Base Right Side 14 900-4389 Channel, BIH152 Base Rear 15 900-4179 Channel, MH152 Cabinet Base Front and Rear 16 806-8421 Rail Assembly, BIH152 17 910-5656 Leg, BIH152 Front 18 823-2579 Bracket, BIH152 Filter Motor Mount 19 Shield, MH152 Base

900-2541 Before 6 Nov 2000

200-0075 After 5 Nov 2000 20 900-2649 Cover, MH52 Rear Access (notch on right) 21 806-5209 Leg Pad Assembly 22 812-1326 Caster, BIH152 Rear 23 823-2844 Caster, BIH152 Front (on units built prior to Nov 2000, use 823-2582)

* 810-1414 Insert, BIH152 Square Leg (component of Item 23, adapts caster to leg) 24 810-0327 Caster, Rear (without brake) 25 Caster, Adjustable Front (with brake)

810-0326 Before 6 Nov 2000

810-0944 After 5 Nov 2000 26 809-0191 Washer, ¼-inch Lock 27 826-1389 Screw, ¼-20 x ¾-inch Hex Head (Pkg. of 10) 28 826-1374 Screw, #10 x ¾-inch Washer Hex Head (cabinet screw) (Pkg. of 25)

* Not illustrated.

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

4-3

4.2.2 BIH52 Cabinet Components (Batteries)

Detail of Base

Assembly Construction

NOTE: Items 26 and 27

are not used on CE units.

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

4-4

Detail of Gusset and

Filter Rail Construction

4.2.2 BIH152 Cabinet Components (Batteries) cont.

ITEM PART # COMPONENT

1 911-7688SP Side, Left Cabinet (all models) 2 912-7688SP Side, Right Cabinet (all models)

3 900-7714 Back, Upper Cabinet (BIH252, BIH452 & BIH552)(900-2881 BIMH452)

4 900-9424 Back, Upper Cabinet (BIH352 and BIH552) 5 900-7712 Back, Lower Cabinet (BIH252, BIH452 and BIH552) 6 900-9425 Back, Lower Cabinet (BIH352 and BIH552) 7 901-1810 Gusset, Left Cabinet (all models) * 902-1810 Gusset, Right Cabinet (BIH252) 8 901-1948 Channel, Universal Side Support (all models) 9 911-4690 Rail, Left Top Filter (all models)

* 912-4690 Rail, Right Top Filter (all models) 10 910-5244 Rail, Universal Filter (all models) 11 900-1959 Bracket, Filter Lock Mounting (all models) 12 900-1957 Lock, Filter (all models) 13 809-0422 Screw, 10-32 x .4-inch Shoulder (all models) 14 809-0189 Washer, ¼-inch SS Flat 15 809-0053 Nut, 10-32 Hex 16 900-7687 Channel, Side Base (all models) 17 Channel, Rear Base

900-7686 BIH252 900-9420 BIH352 900-2390 BIH452 900-9555 BIH552

18 Channel, Front Base

900-4787 BIH352 900-2389 BIH452

9009556 BIH552 19 806-5209 Leg Pad Assembly (all models) 20 809-0191 Washer, ¼-inch Lock (all models) 21 826-1389 Screw, ¼-20 x ¾-inch Hex Head (all models) (Pkg. of 10) 22 810-0944 Caster with Brake, Front (all models) 23 810-0327 Caster, Rear (all models) 24 Shield

900-2452 BIH352 900-2453 BIH452

900-9601 BIH552 25 826-1374 Screw, #10 x ½-inch Hex Washer Head (cabinet screw)(Pkg. of 25) 26 900-4798 Support, Long Cross (all models – not used on CE units) 27 900-2562 Support, Short Cross (all models – not used on CE units) 28 Brace, Top Front

900-7033 BIH252

900-9248 BIH352

900-2393 BIH452

900-9558 BIH552 29 Brace, Top Rear

900-7708 BIH252

900-7709 BIH352

* Not illustrated. LIST CONTINUED ON NEXT PAGE

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

4-5

4.2.2 BIH52 Cabinet Components (Batteries) cont.

ITEM PART # COMPONENT

900-2391 BIH452

900-9557 BIH552 30 900-7710 Post, Cabinet (all models) 31 900-7358 Divider, Cabinet (all models) 32 Post, Short Door

900-4797 All non-CE models.

900-2437 All CE models. 33 900-4799 Post, Long Door (BIH352, BIH452 and BIH552)

* 809-0413 Spacer, Door Post (1/4-inch ID x 4mm nylon washer)

* Not illustrated.

4.2.3 MH52 Cabinet Components (Batteries)

NOTE: MH52 cabinetr y was standardized wi th BIH52 cabinetry beginning w ith units manufactured 6 November 2000 and later. All MH52 cabinetry components except base assembly parts on units manufactured after 6 November 2000 are the same as those on BIH52 units of the same size.

4 5

Detail of Base

Assembly Construction

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

4-6

4.2.3 MH52 Cabinet Components (Batteries) cont.

ITEM PART # COMPONENT

1 Side, Left Cabinet (all models)

911-7036SP Before 6 Nov 2000 911-7688SP After 5 Nov 2000

2 Side, Right Cabinet (all models)

912-7036SP Before 6 Nov 2000 912-7688SP After 5 Nov 2000

3 Back, Lower Cabinet

Before 6 Nov 2000 900-2652 MH252 900-2651 MH352 900-4915 MH452 900-9600 MH552

After 5 Nov 2000 900-7712 MH252, MH452, and MH552 (18-inches x 31-inches) 900-9425 MH352 and MH552 (18-inches x 46.5-inches)

4 Back, Upper Cabinet, MH252 and MH552

900-2411 Before 6 Nov 2000 (10.2-inches x 31.1-inches) 900-7714 After 5 Nov 2000 (18.72-inches x 31.24-inches)

5 Back, Upper Cabinet, MH352 and MH552

900-2412 Before 6 Nov 2000 (10.2-inches x 46.6-inches) 900-9424 After 5 Nov 2000 (18.72-inches x 46.88-inches)

* Back, Upper Cabinet, MH452

900-2413 Before 6 Nov 2000 (9.66-inches x 62.36-inches) 900-7714 After 5 Nov 2000 (18.72-inches x 31.24-inches)

6 Brace, Top Front

900-7033 MH252 900-9248 MH352 900-2393 MH452 900-9558 MH552

* Brace, Top Rear (used only on units built after 05 Nov 2000)

900-7708 MH252 900-7709 MH352 900-2391 MH452 900-9557 MH552

7 Post, Door (all models)

900-7032 Before 6 Nov 2000 900-4799 After 5 Nov 2000

* 809-0413 Spacer, Door Post (1/4-inch ID x 4mm nylon washer ) 8 Divider, Cabinet (all models)

900-7356 Before 6 Nov 2000 900-7358 After 5 Nov 2000

9 Brace, Back Support (all models)

900-7053 Before 6 Nov 2000 900-7710 After 5 Nov 2000

10 Channel, Cabinet Base Left and Right Side (all models)

900-7035 Before 6 Nov 2000 900-7687 After 5 Nov 2000

* Not illustrated. LIST CONTINUED ON NEXT PAGE

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

4-7

4.2.3 MH52 Cabinet Components (Batteries) cont.

ITEM PART # COMPONENT

11 Channel, Cabinet Base Front and Rear

MH252 900-7034 Before 6 Nov 2000 900-7686 After 5 Nov 2000

MH352 900-9249 Before 6 Nov 2000 900-9420 After 5 Nov 2000

MH452 900-4906 Before 6 Nov 2000 900-2390 After 5 Nov 2000

MH552 900-9611 Before 6 Nov 2000 900-9555 After 5 Nov 2000

12 Support, Center Base (MH452, MH552)

900-4907 Before 6 Nov 2000 200-0769 After 5 Nov 2000

13 Shield, Cabinet Base

MH252, MH452 900-2527 Before 6 Nov 2000 (18-inches x 25.2-inches) (MH452 uses 2) 200-0772 After 5 Nov 2000 (17.75-inches x 25.06-inches) (MH452 uses 2)

MH352 900-2528 Before 6 Nov 2000 (18-inches x 17.5-inches) plus 900-2527 200-0771 After 5 Nov 2000 (17.75-inches x 40.7-inches)

MH552 900-9623 Before 6 Nov 2000 (18-inches x 33-inches)

After 5 Nov 2000 uses 1 each of 200-0771 and 200-0772 14 806-5209 Leg Pad Assembly (all models) 15 810-0944 Caster with Brake, Front (all models) 16 810-0327 Caster, Rear (all models) 17 809-0191 Washer, ¼-inch Lock (all models) 18 826-1389 Screw, ¼-20 x ¾-inch Hex Head (all models) (Pkg. of 10) 19 900-2648 Cover, MH52 Rear Access (no notch) 20 900-2649 Cover, MH52 Rear Access (notch on right corner when viewed from rear) 21 900-2650 Cover, MH52 Rear Access (notch on left corner when viewed from rear) 22 900-5482 Cover, MH52 Rear Access (notch in center) 23 826-1374 Screw, #10 x ½-inch Hex Washer Head (cabinet screw) (Pkg. of 25)

* Not illustrated.

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

4-8

THIS PAGE INTENTIONALLY LEFT BLANK

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

4.2.4 BIH52/MH52 Cap-N-Splash Assemblies, Fluecaps, Standoffs and Related Parts

Fluecap

Assemblies

Cap-N-Splash

Assemblies

Standoffs

NOTE: Items 19 through 26 are shown

disproportionately larger than other

items for clarity.

Basket Hangers and

Mounting Hardware

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

4-9

ITEM PART # COMPONENT

Fluecap Assemblies 1 910-2414 BIH152/MH152 (standard) 2 900-7921 BIH152/MH152 (for units with Cap-N-Splash) 3 823-2544 BIH252/MH252 (standard) 4 900-7926 BIH252/MH252 (for units with Cap-N-Splash) 5 823-2545 BIH352/MH352 (standard) 6 900-7927 BIH352/MH352 (for units with Cap-N-Splash) 7 823-2546 BIH452/MH452 (standard) 8 900-7928 BIH452/MH452 (for units with Cap-N-Splash) 9 823-2887 BIH552/MH552 (standard) * 900-2447 Flue Clip Support

Old

Cap-N-Splash Assemblies (See Note)

10 823-2276 BIH152/MH152 (New 823-3066) Kit 826-1223 11 823-2277 BIH252/MH252 (New 823-3067) Kit 826-1218

12 823-2833 JBIH252 (Japanese units)

13 823-2278 BIH352/MH352 (New 823-3068) Kit 826-1217

14 823-2879 JBIH352 (Japanese units)

* 823-2279 BIH452 (New 823-3070) Kit 826-1216 * ----- BIH552 (New 823-3069)

Standoffs

15 900-2406 BIH152/MH152 16 900-2407 BIH252/MH252 17 900-2408 BIH352/MH352 18 900-2409 BIH452/MH452

* 200-6556 BIH552/MH552

Basket Hangers and Mounting Hardware 19 823-0782 Solid (old design) 20 823-1618 Solid (new design) for drop in probes 21 810-2793 Wire Form (with .330-inch mounting holes) 22 809-0171 Thumbscrew, ¼-20 x 1⅜-inch 23 809-0402 Thumbscrew, ¼-20 x ½-inch 24 826-1351 Nutsert, ¼-20 Square (for use on standard fluecap) (Pkg. of 10) 25 809-0535 T-Nut, ¼-20 x 7/16-inch (for use on Cap-N-Splash assembly) 26 809-0079 Nutsert, ¼-20 Round (for use on early-production Cap-N-Splash) 27 809-0921 Spacer, Basket Hanger 28 809-0989 Thumbscrew, ¼-20 x 1-inch

* Not illustrated.

NOTE: In August 2001, a design change required that all models above serial # 0108 replacing the Cap-N-Splash must also replace the topcap. The new topcap and Cap-NSplash are not interchangeable with the previous one.

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

4-10

4.2.5 BIH52/MH52 Control Panel Frames and Topcaps

BIH52

Topcaps

BIH52/MH52

Control Panel Frames

MH52

Topcaps

ITEM PART # COMPONENT

1 806-6137SP BIH152/MH152 Control Panel Frame Assembly 2 806-4819SP BIH252/MH252 Control Panel Frame Assembly 3 806-4820SP BIH352/MH352 Control Panel Frame Assembly 4 806-5963SP BIH452/MH452 Control Panel Frame Assembly 5 806-9750 BIH552/MH552 Control Panel Frame Assembly

Older

Topcaps – See Note on previous page.

6 824-0641 BIH152 Topcap (New 823-0873) w/out hole in front.

7 823-2657 JBIH152 Topcap (Japanese units)

8 824-0544 BIH252 Topcap (New 823-0874) w/out hole in front.

9 823-2652 JBIH252 Topcap (Japanese units)

10 824-0543 BIH352 Topcap (New 823-0875) w/out hole in front.

11 823-2651 JBIH352 Topcap (Japanese units)

12 824-0545 BIH452 Topcap (New 823-0876) w/out hole in front. 13 824-0775 BIH552 Topcap (New 823-0877) w/out hole in front.

14 824-0641 MH152 Topcap 15 824-0544 MH252 Topcap 16 824-0543 MH352 Topcap 17 824-0545 MH452 Topcap

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

4-11

4.2.6 BIH52/MH52 Door Components

Inside Face

of Door

Inside Face

of Door

ITEM PART # COMPONENT

1 806-3057SP Door Assembly with Magnet, BIH52/MH52 Complete 2 806-6545SP Door Assembly without Magnet, BIH52/MH52 Complete 3 810-1422 Handle, Wireform Door 4 826-1379 Screw, #10 x ½-inch Phillips Truss Head (Pkg of 10) 5 810-1508 Hinge, Universal Door * 826-1371 Screw, #8 x ½-inch Hex Head (Pkg of 25) (for attaching Item 5 to cabinet) 6 806-4487SP Pin Assembly, Door Hinge 7 809-0193 Washer, ¼-inch Nylon Flat 8 826-1343 Spring, Door Hinge (Pkg. of 10) 9 Liner, Door

900-2485 BIH52/MH52 Universal Door (no cutout for magnet)

930-3667 BIH52/MH52 Door (with cutout for magnet) 10 824-0137 Panel, BIH52/MH52 Door 11 810-0066 Magnet (door-mounted, used with Item 1) 12 810-1105 Magnet (door post-mounted, used with Item 2)

* Not illustrated.

NOTE: Handle (Item 3), Hinge (Item 5), and Washer (Item 7) are not included in Door Assemblies

(Items 1 and 2). These components must be ordered separately.

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

4-12

4.3 Combustion System, Frypot and Gas System Components

4.3.1 Blowers and Associated Parts

ITEM PART # COMPONENT

1 Blower, Left (with 1.54-inch (3.91 cm) narrow housing)

106-2996SP 100V, 50/60 Hz 106-2994SP 115V, 50/60 Hz 806-5841SP 230V, 50 Hz 106-2995SP 240V, 50/60 Hz

2 Blower, Right (with 1.54-inch (3.91 cm) narrow housing)

806-4697SP 100V, 50/60 Hz 106-2997SP 115V, 50/60 Hz 806-7060SP 230V, 50 Hz 106-2998SP 240V, 50/60 Hz

3 106-3000SP Blower Assembly, Left 230V, 50/60 Hz (with 2.8-inch (7.11 cm) wide housing)

CE and Non-CE

4 106-3001SP Blower Assembly, Right 230V, 50/60 Hz (CE) (with 2.8-inch (7.11 cm) wide

housing) 5 806-9689 Finger Guard/Air Flow Inhibitor Adapter (CE) 6 900-8699 Air Flow Inhibitor (CE) 7 826-1382 Wingnut, 8-32 (Pkg. of 10) 8 826-1426 Shield, MH52 Blower Motor * KIT-0155SP High Altitude Blower Kit (required above 5000 Ft, 1525 M)

* Not illustrated.

NOTE: Items 5, 6, and 7 are components of Items 3 and 4. In CE units, they replace the rotating air shutter

that is standard on 230V Blowers 106-3000SP and 106-3001SP (Items 3 and 4).

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

4-13

+ 31 hidden pages