FrontRow To go Quick Start Guide

1 Table Stand

2 Power Cord

3 Charger for Transmitter

4 Auxiliary Input Cord Kit
(DVD/Computer Sound)

5 Antenna

6 Receiver & Speaker Column

7 Pass Microphone (optional)

8 Behind the Neck Boom Mic

9 Wall Bracket with Screws

10 Body Worn Transmitter

11 Carry Case (optional)

12 Volume Locks

6

5

4

3

2

1

12

11

10

9

7

8

Australia

Phonic Ear
512 Wickham Street
Fortitude Valley Qld 4051
toll-free: 1 800 PHONIC
tel: + 617 3250 0385
fax: [phone]
web: www.gofrontrow.com

Canada

FrontRow
6950 Creditview Road, Unit 1
Mississauga, ON L5N 0A6
toll-free: 800.340.9894
tel: [phone]
fax: [phone]
web: www.gofrontrow.com

821-7404-103/Rev. E/5751 0210

Europe/ASIA

Phonic Ear A/S
Kongebakken 9
2765 Smørum
Denmark
tel: [phone]
fax: [phone]
web: www.gofrontrow.com
www.phonicear.com

New Zealand

Oticon New Zealand Ltd.
142 Lambton Quay
P.O. Box 9128
Te Aro. Wellington
toll-free: 800 OTICON
toll-free fax: 00800 FAX OTICON
web: www.oticon.co.nz

United Kingdom

PC Werth Limited
Audiology House
45 Nightingale Lane
London SW12 8SP
tel: [phone]
web: www.soundfield.info

USA

FrontRow
Corporate Headquaters
2080 Lakeville Highway
Petaluma, CA 94954-6713
toll-free: 800.227.0735
tel: [phone]
fax: [phone]
web: www.gofrontrow.com

QUICKSTART GUIDE

Step 1: Set up Receiver

• Connect antenna

• Open and screw in table stand

• Connect power cord

• Turn main power on

Step 2: Set up Transmitter and Charger

• Insert batteries into transmitter

• Connect power cord to charger

• Place transmitter in charger and charge overnight

• Note: red “charging” light on charger should be on

Step 3: Match Transmitter and Receiver Channel Numbers

You can use two transmitters simultaneously with
your ToGo system as the receiver has two receiving
channels, A and B.

• Match the channel number on the first
transmitter to the Channel A channel number
on the receiver (e.g., 41)

• Match the channel number on the second
transmitter to the Channel B channel
number on the receiver (e.g., 51)

Step 4: Turn on Transmitter

• Connect microphone to transmitter

• Turn on transmitter

Step 5: Turn on Receiver

• Turn receiver Channel A or B on
and adjust volume

Step 6:

• Low:

use in low noise environments for

the most natural voice reproduction

• Mid:

use in moderately noisy environments
to increase emphasis on mid and high speech
frequencies

• High:

use in noisy environments to optimize
mid and high speech frequencies for maximum
speech intelligibility

A

B

LOW
MID
HIGH

Step 6

Step 4

Step 3

Step 2

Step 1

Step 5

Microphone

input

Ch. A

Ch. B