Fronius Document of Compliance DIN V VDE 0126-1-1 Fronius Symo 3.0-3-S - 8.2-3-M Certificate [EN]

Wels, June 26

th

2013

DOCUMENT OF COMPLIANCE FRONIUS SYMO

Fronius International GmbH

Document of Compliance 07013

/ Product: Automatic AC disconnect switch
/ Type: Fronius Symo Setup DE, FRA, AUT, GRE, POR, EXC
/ Intended Use:

The product is to be used as an automatic AC disconnect switch that is inaccessible to the DSO as a safety
function between the PV system and the low-voltage grid. The automatic AC disconnect switch is an integral
part of the PV inverter type:

/ Fronius Symo 3.0-3-S – 4.5-3-S

/ Fronius Symo 3.0-3-M – 8.2-3-M

/ Test specification:

DIN V VDE 0126-1-1: 2006-02 “Automatic switching center between a grid connected
DIN V VDE 0126-1-1 / A1:2012-02 generator and the public low-voltage-grid”

The safety concept of the above product tested with the report of 22.02.2013, ref. 5001204-3971-0002/180045
(VDE Testing and Certification Institute) corresponds to the safety requirements for the intended purpose valid
at the time this certificate was issued.

Fronius International GmbH

Solar Electronics Division
Froniusplatz 1
A-4600 Wels

Ing. Prok. Martin Hackl
Head of Solar Electronics Division

01/2011 1/1