Issued by:
Ramana
Tangirala
Ramana Tangirala
Certificate of Compliance
Certificate: 1668734 (203213) Master Contract: 203213
Project: 70165658 Date Issued: 2018-01-16
Issued to: Fronius International GmbH
Guenter Fronius Strasse 1
Wels-Thalheim, 4600
AUSTRIA
Attention: Josef Feichtinger
The products listed below are eligible to bear the CSA Mark shown
with adjacent indicators 'C' and 'US' for Canada and US or with adjacent
PRODUCTS
CLASS - C561103 - WELDING MACHINES
CLASS - C561183 - WELDING MACHINES-Certified to US Standards
PART A:
Model “VR 7000 CMT” followed with suffixes, wire Feeder for MIG/MAG, CMT processes. Input rated:
55Vdc, 4A, supplied from a certified welding power source specified by Fronius. Weld rated: 360A at 100%;
450A at 60%. IP23.
PART B:
Model “Robacta Drive CMT” robotic torch rated 360A at 100% duty cycle, 450A at 60% duty cycle, 500A at
40% duty cycle.
APPLICABLE REQUIREMENTS
CAN/CSA E60974-1 - Arc Welding Equipment – Part 1: Welding Power Sources
CAN/CSA E60974-5 - Arc Welding Equipment – Part 5: Wire Feeders
ANSI/IEC 60974-1 - Arc Welding Equipment; Part 1: Welding Power Sources
ANSI/IEC 60974-5 - Arc Welding Equipment – Part 5: Wire feeders
DQD 507 Rev. 2012-05-22 Page 1
indicator 'US' for US only or without either indicator for Canada only.
Loading...