Page 1
Installation, Use & Care Guide
30” and 36” Free-Standing Range Hood
Guia de Instalación, Uso y Cuidado
30” y 36” Campana extractora
Guide d’installation, utilisation et d’entretien
30” et 36” Hotte aspirante
RH30WC60GS + RH36WC60GS 316488522
OCT/10
Page 2
22
2
22
Finding Information
Please read and save this guide
ElectrElectr
Thank you for choosing
part of our commitment to customer satisfaction and product quality throughout the service life of your new
appliance.
We view your purchase as the beginning of a relationship. To ensure our ability to continue serving you,
please use this page to record important product information.
oluxolux
Electr
olux, the new premium brand in home appliances. This
ElectrElectr
oluxolux
Use & Care Guide
is
Keep a rKeep a r
Keep a r
Keep a rKeep a r
Purchase date
Model number
Serial number (see picture for location)
ecorecor
d for quick rd for quick r
ecor
d for quick r
ecorecor
d for quick rd for quick r
eferefer
efer
eferefer
enceence
ence
enceence
Registering your product with Electrolux enhances
our ability to serve you. You can register online at
www.electroluxappliances.com
Product Registration Card in the mail.
Questions?
For toll-free telephone support in the U.S. and Canada:
(1-877-435-3287)(1-877-435-3287)
(1-877-435-3287)
For online support and Internet product information visit http://
Table of contents
Important Safety InstructionsImportant Safety Instructions
Important Safety Instructions
Important Safety InstructionsImportant Safety Instructions
Electrical & Installation rElectrical & Installation r
Electrical & Installation requirements
Electrical & Installation rElectrical & Installation r
Electrical requirements......................................................... 5
IMPORTANT............................................................................... 5
Before installing the hood .................................................. 5
List of MaterialsList of Materials
List of Materials
List of MaterialsList of Materials
Parts Included with your Hood ......................................... 6
Optional Accessories ........................................................... 6
Tools/Materials required ....................................................... 6
Installing the hoodInstalling the hood
Installing the hood
Installing the hoodInstalling the hood
Installing preparation............................................................ 7
Wall framing for adequate support ................................. 7
Removing the packaging ................................................... 7
Examples of possible ducting ............................................ 8
Ductwork installation guidelines ..................................... 8
Ductwork and wiring locations ........................................ 8
Mounting the duct cover bracket ................................... 9
Ceiling ducting...................................................................... 10
Wall ducting ............................................................................ 10
House wiring location ........................................................ 10
Install framing for hood support .................................... 10
Mounting the hood ............................................................. 11
Connecting the ductwork ............................................... 12
.....................................................................
........................................................ 7-147-14
..................................... 3-43-4
........................... 55
3-43-4
3-4
7-147-14
Air deector installation
55
5
(Recirculating accessories) ................................................ 12
Making the electrical connections .................................. 13
Mounting the glass canopy................................................ 13
Mounting the duct cover ..................................................... 14
66
6
66
FeaturFeatur
Featur
FeaturFeatur
ContrContr
Contr
ContrContr
Special functionsSpecial functions
Special functions
Special functionsSpecial functions
Clock programming ............................................................... 17
Grease lter saturation alarm............................................... 17
Charcoal lter saturation alarm
(Recirculating acc essories) ................................................ 17
Audible signal activation and deactivation .................. 17
Charcoal lter inclusion and exclusion
(Recirculating accessories) .................................................. 17
Heat sensor............................................................................... 17
For Best results ........................................................................ 18
CarCar
e and cleaninge and cleaning
Car
e and cleaning
CarCar
e and cleaninge and cleaning
Filters .......................................................................................... 19
Lights .......................................................................................... 19
Optional Charcoal Filters ..................................................... 20
Hood Surface .......................................................................... 20
WW
arranty Informationarranty Information
W
arranty Information
WW
arranty Informationarranty Information
NOTE
by dropping your
ww
w.electroluxappliances.com
eses
es
eses
.................................................................................. 1515
ol buttonsol buttons
ol buttons
ol buttonsol buttons
................................................................... 1616
................................................................ 1717
............................................................
..
........................................................ 2121
1515
15
1616
16
1717
17
1919
19
1919
2121
21
©2007 Electrolux Home Products, Inc.
All rights reserved. Printed in Mexico
Page 3
Important Safety Instructions
Important Safety Instructions
33
3
33
Read all instructions beforRead all instructions befor
Read all instructions befor
Read all instructions beforRead all instructions befor
appliance.appliance.
appliance.
appliance.appliance.
Save these instructions for futurSave these instructions for futur
Save these instructions for futur
Save these instructions for futurSave these instructions for futur
rr
eferefer
ence.ence.
r
efer
ence.
rr
eferefer
ence.ence.
ApprAppr
oved for roved for r
Appr
oved for r
ApprAppr
oved for roved for r
For rFor r
esidential use onlyesidential use only
For r
esidential use only
For rFor r
esidential use onlyesidential use only
Do not attempt to install or operate your appliance
until you have read the safety precautions in this
manual. Safety items throughout this manual are
labeled with a WARNING or CAUTION based on the
risk type.
esidential appliancesesidential appliances
esidential appliances
esidential appliancesesidential appliances
e using thise using this
e using this
e using thise using this
ee
e
ee
This symbol alerts you to
situations that may cause
serious body harm, death
or property damage.
This symbol alerts you to
situations that may cause
bodily injury or property
damage.
PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING.
INSTALLATION MUST COMPLY WITH ALL LOCAL CODES.
IMPORTANT: Save these Instructions for the Local Electrical Inspector’s use.
INSTALLER: Please leave these Instructions with this unit for the owner.
OWNER: Please retain these instructions for future reference.
Safety Warning: Turn o power circuit at service panel and lock out panel, before wiring this appliance.
Requirement: 120 V AC, 60 Hz. 15 or 20 A Branch Circuit
Page 4
44
4
44
Important safety Instructions
READ AND SAVE THESE INSTRUCTIONS
Important safety Instructions
FOR GENERAL VENTILATING USE ONLY. DO NOT USE
TO EXHAUST HAZARDOUS OR EXPLOSIVE MATERIALS OR VAPORS.
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
A. Use this unit only in the manner intended by the manu-
facturer. If you have questions, contact the manufacturer.
B. Before servicing or cleaning the unit, switch power o
at service panel and lock service panel disconnecting
means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning
device, such as a tag, to the service panel.
C. Installation Work and Electrical Wiring Must Be Done
By Qualied Person(s) In Accordance With All Applicable Codes & Standards, Including Fire-rated Construction.
D. Sucient air is needed for proper combustion and ex-
hausting of gases through the ue (Chimney) of fuel
burning equipment to prevent back- drafting. Follow
the heating equipment manufacturers guideline and
safety standards such as those published by the National Fire Protection Association (NFPA), the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.
E. When cutting or drilling into wall or ceiling, do not dam-
age electrical wiring
F. Ducted systems must always be vented to the outdoors.
To reduce risk of re and to properly exhaust air, be
sure to duct air outside - do not vent exhaust air into
spaces within walls, ceilings, attics, crawl spaces, or
garages.
and other hidden utilities.
Automatically Operated Device - To Reduce The
Risk Of Injury Disconnect From Power Supply Before
Servicing.
This unit is equpeed with integral disconnecting switch
located inside the blower housing
TO REDUCE THE RISK OF A RANGE TOP GREASE
FIRE.
a) Never leave surface units unattended at high settings.
Boilovers cause smoking and greasy spillovers that may
ignite. Heat oils slowly on low or medium settings.
b) Always turn hood ON when cooking at high heat or
when ambeing food (I.e. Crepes Suzette, Cherries
Jubilee, Peppercorn Beef Flambe’).
c) Clean ventilating fans frequently. Grease should not
be allowed to accumulate on fan or lter.
d) Use proper pan size. Always use cookware appropri-
ate for the size of the surface element.
TO REDUCE THE RISK OF INJURY TO PERSONS, IN
THE EVENT OF A RANGE TOP GREASE FIRE, OBSERVE THE FOLLOWING
a) SMOTHER FLAMES with a close-tting lid, cookie
sheet, or other metal tray, then turn o the gas burner
or the electric element. BE CAREFUL TO PREVENT
BURNS. If the ames do not go out immediately,
EVACUATE AND CALL THE FIRE DEPARTMENT.
b) NEVER PICK UP A FLAMING PAN - you may be
burned.
c) DO NOT USE WATER, including wet dishcloths or tow-
els - a violent steam explosion will result.
d) Use an extinguisher ONLY if:
1) You know you have a class ABC extinguisher, and
you already know how to operate it.
2) The re is small and contained in the area where it
started.
3) The re department is being called.
4) You can ght the re with your back to an exit.
:
TO REDUCE THE RISK OF FIRE, USE ONLY METAL
DUCT WORK.
Install this hood in accordance with all requirements specied.
To Reduce The Risk Of Fire Or Electric Shock, Do Not
Use This Hood With Any External Solid State Speed
Control Device.
OPERATION
a. Always leave safety grills and lters in place. Without
these components, operating blowers could catch onto hair,
ngers and loose clothing.
The manufacturer declines all responsibility in the event
of failure to observe the instructions given here for installation, maintenance and suitable use of the product. The
manufacturer further declines all responsibility for injury
due to negligence and the warranty of the unit automatically expires due to improper maintenance.
Page 5
Important safety Instructions - Electrical & Installation
READ AND SAVE THESE INSTRUCTIONS
Electrical & Installation requirements
requirements
55
5
55
Electrical rElectrical r
Electrical r
Electrical rElectrical r
IMPORIMPOR
IMPOR
IMPORIMPOR
Observe all governing codes and ordinances.
It is the customer’s responsibility:
To contact a qualied electrical installer.
To assure that the electrical installation is adequate
and in conformance with National Electrical Code,
ANSI/NFPA 70 — latest edition*, or CSA Standards
C22.1-94, Canadian Electrical Code, Part 1 and
C22.2 No.0-M91 - latest edition** and all local codes
and ordinances.
If codes permit and a separate ground wire is used, it
is recommended that a qualied electrician determine
that the ground path is adequate.
Do not ground to a gas pipe.
Check with a qualied electrician if you are not sure
range hood is properly grounded.
Do not have a fuse in the neutral or ground circuit.
IMPORIMPOR
IMPOR
IMPORIMPOR
Save Installation Instructions for electrical inspector’s
use.
TT
T
ANT
TT
TT
ANTANT
T
ANT
TT
ANTANT
equirequir
equir
equirequir
ANTANT
ANTANT
ementsements
ements
ementsements
Before installing the hood
1.1.
1. For the most ecient air ow exhaust, use a
1.1.
straight run or as few elbows as possible.
Vent unit to outside of building and recirculating.
2.2.
2. At least two people are necessary for installation.
2.2.
3.3.
3. The hood is tted with Screws and Drywall
3.3.
Anchors suitable for most surfaces, consult a
Qualied Installer, check if they perfectly t with
your cabinet/wall.
4.4.
4. Do not use ex ducting.
4.4.
5.5.
5. COLD WEATHER installations should have an
5.5.
additional backdraft damper that is already installed
to minimize backward cold air ow and a nonmetallic
thermal break to minimize conduction of outside
temperatures as part of the ductwork. The
damper should be on the cold air side of the
thermal break.
The break should be as close as possible to
where the ducting enters the heated portion of
the house.
The range hood must be connected with copper wire
only.
The range hood should be connected directly to the
fused disconnect (Or circuit breaker) box through
metal electrical conduit.
Wire sizes must conform to the requirements of the
National Electrical Code ANSI/NFPA 70 — latest edition*, or CSA Standards C22.1-94, Canadian Electrical Code Part 1 and C22.2 No. 0-M91 - latest edition** and all local codes and ordinances.
A U.L.- or C.S.A.-listed conduit connector must be
provided at each end of the power supply conduit (at
the range hood and at the junction box).
Copies of the standards listed may be obtained from:
* National Fire Protection Association Batterymarch Park Quincy,
Massachusetts 02269
** CSA International 8501 East Pleasant Valley Road Cleveland, Ohio 44131-5575
6.6.
6. Make up air: Local building codes may require the
6.6.
use of Make-Up Air Systems when using Ducted
Ventilation Systems greater than specied CFM of
air movement.
The specied CFM varies from locale to locale.
Consult your HVAC professional for specic
requirements in your area.
Page 6
66
6
66
List of Materials
List of Materials
Parts Included with your HoodParts Included with your Hood
Parts Included with your Hood
Parts Included with your HoodParts Included with your Hood
tHood canopy assembly with blower, transition.
tLamp already installed.
tGrease lter.
tGlass Canopy
tDuct cover.
tBottom
tTop
tHardware bag with:
tPlastic Gasket.
tTemplate.
tTop duct cover wall support bracket (1 piece)
tUse, care and installation guide
tGlass bracket (2 pieces)
tWood screws (6 pieces - 3/16" x 1" 3/4)
tHood attachment anchors screws (6 pieces -
1/8" x 3/8")
tAssembly screws (8 pieces)
Optional accessoriesOptional accessories
Optional accessories
Optional accessoriesOptional accessories
tRe circulation KIT
tCharcoal lter
tGrease lter replacement
TT
ools/Materials rools/Materials r
T
ools/Materials r
TT
ools/Materials rools/Materials r
tDuct tape
tWire nuts
tTape to mount template
t8" rounded metal duct length to suit installation
tGloves to protect against sharp edges
tSafety glasses
tHammer
tElectric drill with 5/16" bit
tPliers
tMeasuring tape
tSaw, jig saw
tLevel
tKnife
tWire cutter
tPhillips (Pozidrive) # 2 screwdriver
tTorx # 2 screwdriver
equirequir
equir
equirequir
eded
ed
eded
Page 7
Installing the hood
Installing the hood
77
7
77
tt
tFor the most ecient air ow exhaust, use a
tt
straight run or as few elbows as possible.
Vent unit to outside of building and recirculating.
tt
tOn avarage 2 to 3 hours are necessary to com-
tt
plete installation (without considering cut to be
done on wall and or on cabinet, installation of
ducts , conduit and electrical connections to the
mains).
tt
tThe hood is tted with Screws and Drywall
tt
Anchors suitable for most surfaces, consult a
Qualied Installer, check if they perfectly t with
your cabinet/wall.
tt
tDo not use ex ducting.
tt
tt
tCOLD WEATHER installations should have an
tt
additional backdraft damper that is already installed
to minimize backward cold air ow and a nonmetallic
thermal break to minimize conduction of outside
temperatures as part of the ductwork. The
damper should be on the cold air side of the
thermal break.
The break should be as close as possible to
where the ducting enters the heated portion of
the house.
tt
tMake up air: Local building codes may require the
tt
use of Make-Up Air Systems when using Ducted
Ventilation Systems greater than specied CFM of
air movement.
The specied CFM varies from locale to locale.
Consult your HVAC professional for specic
requirements in your area.
tt
TT
ypical installationypical installation
t
T
ypical installation
tt
TT
ypical installationypical installation
Min installation height from the range top to the
bottom of the hood is 30" if a gas range is used
or 24" to 30" if an electric range is used.
These hoods arThese hoods ar
These hoods ar
These hoods arThese hoods ar
over indoor grills.over indoor grills.
over indoor grills.
over indoor grills.over indoor grills.
e not re not r
ecommended to be usedecommended to be used
e not r
ecommended to be used
e not re not r
ecommended to be usedecommended to be used
The hood may be installed onto a wall and vented to
the outdoors, or it can be installed for recirculating
operation (recirculating accessories not supplied with
the hood).
This hood can be installed over any electric and gas
cooktop/range.
It can not be installed over any prIt can not be installed over any pr
It can not be installed over any pr
It can not be installed over any prIt can not be installed over any pr
cooktop / range.cooktop / range.
cooktop / range.
cooktop / range.cooktop / range.
Installing prInstalling pr
Installing pr
Installing prInstalling pr
Advance planningAdvance planning
Advance planning
Advance planningAdvance planning
tDetermine the exact location of the vent hood.
tPlan the route for venting exhaust to the
outdoors.
tUse the shortest and straightest duct route
possible.
Refer to “
paragraph for further informations.
tInstall a wall cap with damper or roof cap at the
exterior opening. Order the wall or roof cap and
anytransition needed in advance.
tUse 8" round metal ductwork only.
WW
all framing for adequate supportall framing for adequate support
W
all framing for adequate support
WW
all framing for adequate supportall framing for adequate support
tThis vent hood is heavy.
‘Adequate structure and support must be
provided in all types of installations. The hood
must be secure to vertical studs in the wall, or to
a horizontal support.
tThe vent hood should be on site before nal
framing and wall nishing. This will help to
accurately locate the duct work and electrical
service.
tInstallation will be easier if the vent hood is
installed before the cook-top and countertop are
installed.
Removing the packagingRemoving the packaging
Removing the packaging
Removing the packagingRemoving the packaging
Remove carton carefully, Wear gloves to protect
against sharp edges.
eparationeparation
eparation
eparationeparation
Ductwork installation guidelinesDuctwork installation guidelines
Ductwork installation guidelines”
Ductwork installation guidelinesDuctwork installation guidelines
ofessionalofessional
ofessional
ofessionalofessional
Remove the protective lm covering the product
before putting into operation.
Page 8
88
8
88
Installing the hood
Examples of possible ducting
Ductwork installation guidelines
For safety reasons, ducting should vent directly
outdoors (not into an attic, underneath the house,
into the garage or into any enclosed space).
Keep duct runs as short and straight as possible.
Duct ttings (elbows and transitions) reduce air ow
eciency.
Back to back elbows and “S“ turns give very poor
delivery and are not recommended.
A short straight length of duct at the inlet of the
remote blower gives the best delivery.
Transition to duct from the integral blower or remote
duct transition as close to the downdraft as is possible.
In order of preference, use
1st. 10" round duct
2nd. 8" round duct
3rd. 3-1/4" x 14" duct
4th. 7" round duct
5th. 3-1/4" x l0" duct
6th. 6" round duct
The use of exible metal round duct should only be
used when no other duct tting exists. Limit use to
short lengths and do not crush when making
corners.
Ductwork and wiring locationsDuctwork and wiring locations
Ductwork and wiring locations
Ductwork and wiring locationsDuctwork and wiring locations
tDetermine the exact location of the vent hood.
tLocate the template packed with the literature.
tThe height installation is determined by the
following image. Mark the location.
30" Gas Cooktop
24" - 30" Electric Cooktop
tInstallation height: 30" gas cooktop/range or 24"
to 30" electric cooktop/range.
tUse a level to draw a horizontal straight pencil line
on the wall, which is your desired
installation height.
tFind the centerline of the cooktop. Use a level to
draw a vertical straight pencil line on the wall.
CHECK TO BE SURE THE LINE IS PERFECTLCHECK TO BE SURE THE LINE IS PERFECTL
CHECK TO BE SURE THE LINE IS PERFECTL
CHECK TO BE SURE THE LINE IS PERFECTLCHECK TO BE SURE THE LINE IS PERFECTL
PERPERNDICULAR.PERPERNDICULAR.
PERPERNDICULAR.
PERPERNDICULAR.PERPERNDICULAR.
YY
Y
YY
Page 9
Installing the hood
99
9
99
Mounting the duct cover bracketMounting the duct cover bracket
Mounting the duct cover bracket
Mounting the duct cover bracketMounting the duct cover bracket
The duct bracket should be installed against the
back wall and ush with the ceiling. This bracket will
hold the telescopic duct cover in place at the top
.
SecurSecur
e the bracket to the wall:e the bracket to the wall:
Secur
e the bracket to the wall:
SecurSecur
e the bracket to the wall:e the bracket to the wall:
tAlign the marked centerline on the bracket with
the centerline on the wall.
tMark 2 screw hole locations in the wall.
tDrill 5/16" pilot holes in the marked locations.
tInstall wall fastener anchors.
tDrive wood screws, by hand, into the fastener to
allow anchors to expand. Remove the screws.
tSecure the bracket to the wall with wood screws
and/or fasteners.
Ceiling ductingCeiling ducting
Ceiling ducting
Ceiling ductingCeiling ducting
If the duct will vent straight up to the ceiling:
tUse level to draw a line straight up, from the
centerline on the template to the ceiling.
tMeasure at least 4 -3/4 ” from the back wall to
the circle center of an 8-½” hole on the ceiling.
WW
all ductingall ducting
W
all ducting
WW
all ductingall ducting
If ductwork will vent to rear:
tUse a level to draw a line straight up from the
centerline on the template.
tMeasure at least 23 - 3/4" (the measure might
vary depending on the elbow used) above the
pencil line that indicates the bottom installation
height, to the circle center of an 8-½” diameter
duct hole (Hole may be elongated for duct elbow).
House wiring locationHouse wiring location
House wiring location
House wiring locationHouse wiring location
tThe junction box is located on the top left side of
the hood.
tWiring should enter the back wall at least 20"
above the bottom of the installation height, and
within 5-7/8" and 4-7/8"of the left side of the
centerline.
Page 10
10
Mark “lower” wood screw holes locations in the
wall using a pencil.
Installing the hood
Install framing for hood supportInstall framing for hood support
Install framing for hood support
Install framing for hood supportInstall framing for hood support
If drywall is present, mark the screw hole
locations. Remove the template.
Cut away enough drywall to expose 2 vertical
studs at the holes location indicated by the
template.
Install two horizontal supports at least ùé X 2é
between two wall studs at the bottom and upper
mounting holes installation location.
room side of the studs.
Use cleats behind both sides of the support to
secure to wall studs.
IMPORIMPOR
T T
ANTANT
- -
IMPOR
IMPORIMPOR
supporting êûû lbs.supporting êûû lbs.
supporting êûû lbs.
supporting êûû lbs.supporting êûû lbs.
Framing must be capable ofFraming must be capable of
T
ANT
-
Framing must be capable of
T T
ANTANT
- -
Framing must be capable ofFraming must be capable of
Mounting the hoodMounting the hood
Mounting the hood
Mounting the hoodMounting the hood
WARNING: 2 people are required to lift and position
the hood onto the mounting screws.
Place the template on the wall along the horizon-
tal line, make sure the template is leveled and
centered with the centerline.
Mark “upper” screw holes locations in the wall.
IMPORTANT. Check to be sure that hole locations
are leveled and correctly centered by the vertical
centerline.
Drive “upper” wood screws by hand. Leave ¼ “ of
distance between the screw head and the wall.
onto the “upper” screws.
Page 11
Remove the hood.
Drive “lower” wood screws, by hand. Remove
screws.
Mount the hood onto the “upper” screws.
Drive and tighten the “upper” wood screws, by
hand.
Drive and tighten the “lower” wood screws, by
hand.
Installing the hood
11
Page 12
1212
12
1212
Installing the hood
Connecting the ductworkConnecting the ductwork
Connecting the ductwork
Connecting the ductworkConnecting the ductwork
tInstall ductwork, making connections in the
direction of airow as illustrated.
tPush duct over the exhaust outlet.
tWrap all duct joints and the ange connections
with duct tape for an airtight seal.
tMake the same connection in the wall or ceiling
vent exit.
Ductwork
Duct tape
over seams
Hood
Airow
Air deector installationAir deector installation
Air deector installation
Air deector installationAir deector installation
(Recir(Recir
culating accessories)culating accessories)
(Recir
culating accessories)
(Recir(Recir
culating accessories)culating accessories)
tAssemble the air deector with the duct cover
bracket with 4 assembly screws provided as
shown.
tMeasure from the bottom of the air deector to
the bottom of the hood outlet, as shown.
tCut the duct at the measured size.
tUninstall the air deector removing the 4
assembly screws.
tSlip the duct onto the bottom of the deector.
tPlace the assembled deector and duct over the
exhaust outlet from the hood.
tAssemble the air deector to the duct cover
bracket with 4 assembly screws provided as
shown.
Page 13
Making the electrical connections
Electrical Shock Hazard
wiring this unit.
ê2û Vê2û V
AC, ê5 or 2û Amp cirAC, ê5 or 2û Amp cir
ê2û V
AC, ê5 or 2û Amp cir
ê2û Vê2û V
AC, ê5 or 2û Amp cirAC, ê5 or 2û Amp cir
ELECTRICAL GROUNDING INSTRUCTIONSELECTRICAL GROUNDING INSTRUCTIONS
ELECTRICAL GROUNDING INSTRUCTIONS
ELECTRICAL GROUNDING INSTRUCTIONSELECTRICAL GROUNDING INSTRUCTIONS
THIS APPLIANCE IS FITTED WITH AN ELECTRICAL
JUNCTION BOX WITH À WIRES, ONE OF WHICH
ôGREEN/YELLOWÈ SERVES TO GROUND THE
APPLIANCE. TO PROTECT YOU AGAINST
ELECTRIC SHOCK, THE GREEN AND YELLOW
WIRE MUST BE CONNECTED TO THE
GROUNDING
HOME ELECTRICAL SYSTEM, AND IT MUST
UNDER NO CIRCUMSTANCES BE CUT OR REMOVED.
FailurFailur
e to do so can re to do so can r
Failur
e to do so can r
FailurFailur
e to do so can re to do so can r
shock.shock.
shock.
shock.shock.
Remove junction box cover and knockout on the
top left side.
WIRE IN YOUR
esult in death or electricalesult in death or electrical
esult in death or electrical
esult in death or electricalesult in death or electrical
cuit rcuit r
cuit r
cuit rcuit r
equirequir
equir
equirequir
ed.ed.
ed.
ed.ed.
Installing the hood
13
Run black ôliveÈ, white ôneutralÈ, and green ôearthÈ
wires ôí êù AWGÈ according to the National
Electrical Code or CSA Standards and local
codes and ordinances in ê/2” conduit from power
supply to junction box.
Connect black, white, and green wires from
power supply to black, white, and green/yellow
wires in junction box respectively.
These connections should be done always
making reference to the electrical diagram found
inside the hood.
Close junction box cover and reapply screws.
If not already done, install ê/2” conduit connector
in junction box.
Page 14
1414
14
1414
Installing the hood
Mounting the duct coverMounting the duct cover
Mounting the duct cover
Mounting the duct coverMounting the duct cover
Position the duct cover over the mounted hood.
Slide the bottom of the duct onto the glass area.
Position the top of the duct over the duct
mounting bracket. If a telescopic duct cover is
used, grab the upper part of the telescopic duct
cover, pull it and place it in the duct cover
mounting bracket.
Secure the top of the duct with 2 assembly
screws provided.
Remove Protective
Secure the bottom of the duct with 2 assembly
screws provided.
panel. Check operation of the hood.
Page 15
Features
1.1.
1. Blower and light controls
1.1.
2.2.
2. Lamp housings
2.2.
3.3.
3. Grease lter Handle
3.3.
4.4.
4. Grease lter
4.4.
5.5.
5. Canopy
5.5.
6.6.
6. Duct cover
6.6.
t#PUUPN
t5PQ
7.7.
7. Louver holes (User for Recirculating accessories)
7.7.
Features
1515
15
1515
Page 16
16
Controlíbuttons
Controlíbuttons
This hood is equipped with an electronic motor and
lamp control.
ON/OFF light and has a timer function.
In the following drawing are described the main key
functions.
1.íLightíButton1.íLightíButton
1.íLightíButton
1.íLightíButton1.íLightíButton
Press lamp button to turn ON the light ôLamp
state previously OFFÈ.
Press lamp button to turn OFF the light ôLamp
state previously ONÈ.
2.íTimeríButton2.íTimeríButton
2.íTimeríButton
2.íTimeríButton2.íTimeríButton
The default timer setting is êû minutes, and it
can be adjusted between 2û minutes and
êminute.
After pressing the timer button, the control
enters to a timer setup mode, and user can
adjust the timer countdown time with the
” and “ ” buttons within 5 seconds.
“
The timer can be initiated immediately
pressing the timer button, after setting the
timer duration or pressing the timer button
twice ôdefault êû minutes settingÈ.
If no action occurs within 5 seconds, the
countdown will start.
During the timer setup the “ ” and “ ”
buttons are dedicated to the timer and no
motor action will occur.
Once the timer is initiated, it can be cancelled
by pressing the timer button again.
If the fan is at second speed and the “ ”
speed.
If the fan is at third speed and the “ ” key is
pressed, the fan will be set to second speed.
If the fan is at fourth speed and the “ ”
button is pressed, the fan will be set to third
speed.
If the fan is OFF and the “ ” button is
pressed, the control backlight will light up.
5.í“5.í“
5.í“
5.í“5.í“
”íButton.íSpeedíIncr”íButton.íSpeedíIncr
”íButton.íSpeedíIncr
”íButton.íSpeedíIncr”íButton.íSpeedíIncr
This button is used to increase the fan speed,
or turn ON the fan.
The fan will turn ON if the “ ” button is
pressed and the hood was OFF.
is pressed, the fan will be set to second
speed.
If the fan is at second speed and the “ ”
button is pressed, the fan will be set to third
speed.
If the fan is at third speed and the “ ”
button is pressed, the fan will be set to fourth
speed.
If the fan is at fourth speed and the “ ”
button is pressed, a beep will sound.
easeí/íONeaseí/íON
easeí/íON
easeí/íONeaseí/íON
” button
3.íDisplay3.íDisplay
3.íDisplay
3.íDisplay3.íDisplay
Shows the hood settings.
4.í“4.í“
4.í“
4.í“4.í“
”íButton.íSpeedíDecr”íButton.íSpeedíDecr
”íButton.íSpeedíDecr
”íButton.íSpeedíDecr”íButton.íSpeedíDecr
This button is used to decrease the fan speed,
or turn OFF the fan.
The fan will turn OFF if the “ ” button is
easeí/íOFFeaseí/íOFF
easeí/íOFF
easeí/íOFFeaseí/íOFF
Page 17
Special functions
Control buttons - Special functions
1717
17
1717
Clock prClock pr
Clock pr
Clock prClock pr
tThe clock can be reprogrammed at any time except during an active timed function.
tThe clock can be displayed in a twelve hour format and valid clock times are from 1:00 to 12:59.
tThe clock can be reprogrammed pressing the “
tThe user can have minute increments / decrements of 1 minute, but if the user keep pressing the “ ”/
tThe user can nish on reprogramming the clock pressing the “
tAfter 1 minute of no button pressed the control will accept the programmed clock time and will add one
GrGr
Gr
GrGr
tAfter thirty fan functional hours, the display will show “
tTo reset the grease lter saturation alarm the user must press the “ ” button for 5 seconds, after this
CharChar
Char
CharChar
tAfter one hundred and twenty functional hours of the fan, the display will show “
tTo reset the charcoal lter saturation indication the user must press the “ ” button for 5 seconds, after
ogrammingogramming
ogramming
ogrammingogramming
TT
imerimer
T
imer” button for 5 seconds, and after, the clock can be
TT
imerimer
adjusted with the “ ” and “ ” buttons. Colon “:” will ash indicating clock programming mode.
” ” buttons for more than 1 second, the increments / decrements will be of 5 minutes.
During this option the control will round to the nearest 5 minutes.
TT
imerimer
T
imer” button.
TT
imerimer
minute to the set clock.
ease lter saturation alarmease lter saturation alarm
ease lter saturation alarm
ease lter saturation alarmease lter saturation alarm
GrGr
ease Filterease Filter
Gr
ease Filter” if the fan is active.
GrGr
ease Filterease Filter
When this icon is shown in the display, the grease lters installed are required to be washed.
GrGr
action the icon “
coal lter saturation alarm (Recircoal lter saturation alarm (Recir
coal lter saturation alarm (Recir
coal lter saturation alarm (Recircoal lter saturation alarm (Recir
is active. When this icon ashes on display, the charcoal lters installed are required to be replaced or
reactivated.
this time the icon “
ease lterease lter
Gr
ease lter” is not displayed, and the hood has the normal display operation.
GrGr
ease lterease lter
culating accessories)culating accessories)
culating accessories)
culating accessories)culating accessories)
CharChar
coal Filtercoal Filter
Char
coal Filter” if the fan
CharChar
coal Filtercoal Filter
CharChar
coal ltercoal lter
Char
coal lter” is not displayed and the hood has the normal display operation.
CharChar
coal ltercoal lter
Audible signal activation and deactivationAudible signal activation and deactivation
Audible signal activation and deactivation
Audible signal activation and deactivationAudible signal activation and deactivation
tThe audible signals can be activated or deactivated pressing the “
tIf the audible signal is activated, a tone must sound and the “
2 seconds.
tIf the audible signal is deactivated, the “
tone must sound.
CharChar
coal lter inclusion and exclusion (Recircoal lter inclusion and exclusion (Recir
Char
coal lter inclusion and exclusion (Recir
CharChar
coal lter inclusion and exclusion (Recircoal lter inclusion and exclusion (Recir
tThe charcoal lter inclusion or exclusion can be set by pressing the “ ” and “ ” buttons at the same
time for 5 seconds.
tThe Inclusion or exclusion of charcoal lter must be selected while the lamps and the motor are OFF.
tWhen the charcoal lter has been excluded, the charcoal lter alarm is disabled.
Heat sensorHeat sensor
Heat sensor
Heat sensorHeat sensor
tThe control is equipped with a heat sensor that will turn on the blower at second speed if excessive heat
occurs (over
tIf the blower is OFF or if it is operating at rst speed, the blower will be set automatically to second speed,
the display shows the word "
tDuring this state, the user may raise the blower speed to third speed but can not decrease the speed.
tWhen the temperature level on the hood drops to normal, the blower will operate in the setting dened by
the user before the alarm occured.
158° F158° F
158° F or
158° F158° F
70°C70°C
70°C) surrounding the control area.
70°C70°C
CArECArE
CArE" to indicate that heat sensor has detected an excessive heat.
CArECArE
SndSnd
Snd” symbol must appear on the display for 2 seconds and no
SndSnd
culating accessories)culating accessories)
culating accessories)
culating accessories)culating accessories)
LightLight
Light” button for 5 seconds.
LightLight
SndSnd
Snd” symbol must appear on the display for
SndSnd
Page 18
1818
18
1818
For Best rFor Best r
For Best r
For Best rFor Best r
tContinuous use of the fan system while cooking helps keep the kitchen comfortable and less humid.
tIt also reduces cooking odors and soiling moisture that create a frequent need for cleaning.
tTurn the blower on before starting to cook.
tUse a rear burner when browning or pan frying meat.
tOpen a window or inside door slightly.
tClean the lters and the wall behind the lters frequently.
tThe blower should be turned on for a few minutes
through the hood. Thus when heat, smoke, moisture, grease and cooking odors are produced, they will
be carried outside instead of drifting into other rooms.
tUse the low speeds for normal use and the higher speeds for strong odors or fumes.
tDrafts across the range or cooktop will cause the escape of heat, smoke, moisture, grease and cooking
odors from the hood. Such drafts should be prevented in so far as possible.
tThe best job of ventilation in the kitchen is done where the only air currents are those created by the
blower itself.
For Gas Cooktops, For Gas Cooktops,
t
For Gas Cooktops, a lower blower speed should be used if:
For Gas Cooktops, For Gas Cooktops,
tthe gas ame is being distorted by the air movement.
tthe burner continually sparks (clicks)
tthe burner ame repeatedly blows out.
esultsesults
esults
esultsesults
beforbefor
ee
befor
e cooking in order to establish air currents upward
beforbefor
ee
Page 19
Care and cleaning
Care and cleaning
1919
19
1919
The eciency of the range hood system depends on
the cleanliness of the intake and lters.
The frequency of cleaning depends on the amount
and type of cooking.
tDo not use the ventilating system without the
lters in place or with grease-laden lters or
surfaces.
To avoid risk of re and explosion do not use
ammable liquids or solvents.
Always unplug or disconnect the appliance from the
power supply before servicing.
Be sure the entire hood (including the lters and light
bulbs) has cooled and grease has solidied before
attempting to clean any part of the appliance.
FiltersFilters
Filters
FiltersFilters
The metal grease lters are made of stainless steel
anodized aluminum and are long lasting.
LightsLights
Lights
LightsLights
Before replacing the lamps, switch power o at
service panel and lock service panel disconnecting
means to prevent power from being switched on
accidentally.
NOTE: TNOTE: T
NOTE: T
NOTE: TNOTE: T
to to
to
to to
operate be suroperate be sur
operate be sur
operate be suroperate be sur
calling service.calling service.
calling service.
calling service.calling service.
Replace LightsReplace Lights
Replace Lights
Replace LightsReplace Lights
tRemove the inner lamp lens cover by inserting a
urur
n ofn of
f the lights and fan. Allow the lightsf the lights and fan. Allow the lights
ur
n of
f the lights and fan. Allow the lights
urur
n ofn of
f the lights and fan. Allow the lightsf the lights and fan. Allow the lights
coolcool
befor befor
befor
befor befor
e handling.e handling.
e handling.
e handling.e handling.
e lights are lights ar
e lights ar
e lights are lights ar
cool
coolcool
small at blade screwdriver into each of the three
slots and gently prying it free.
NOTE: Do not remove the outer trim ring (lamp
assembly).
If new lights do notIf new lights do not
If new lights do not
If new lights do notIf new lights do not
e inserted corre inserted corr
e inserted corr
e inserted corre inserted corr
ectly beforectly befor
ectly befor
ectly beforectly befor
ee
e
ee
ease
TT
o Remove The Metal Gro Remove The Metal Gr
T
o Remove The Metal Gr
TT
o Remove The Metal Gro Remove The Metal Gr
tTurn the fan and lights o.
tPull the spring release handle.
TT
o Replace The Metal Gro Replace The Metal Gr
T
o Replace The Metal Gr
TT
o Replace The Metal Gro Replace The Metal Gr
tReverse procedure.
TT
o Clean Filterso Clean Filters
T
o Clean Filters
TT
o Clean Filterso Clean Filters
tt
tIt is recommended that the lters be washed at
tt
least once a month; they can be washed by hand
or in the dishwasher.
tDrain water through edge holes and let each lter
dry thoroughly before replacing it.
Filters
ease Filtersease Filters
ease Filters
ease Filtersease Filters
tGrasp the bulb and pull it straight out.
tReplace with 12 volt, 20 watt halogen bulbs with
a G4 base SUITABLE FOR USE IN OPEN
LUMINAIRES.
Follow package dirFollow package dir
Follow package dir
Follow package dirFollow package dir
touch bulb with your bartouch bulb with your bar
touch bulb with your bar
touch bulb with your bartouch bulb with your bar
tReplace inner cover by inserting the three
retaining tabs into the three slots and pressing
them rmly in place.
ections, wear gloves, do notections, wear gloves, do not
ections, wear gloves, do not
ections, wear gloves, do notections, wear gloves, do not
e ngers.e ngers.
e ngers.
e ngers.e ngers.
Page 20
2020
20
2020
Care and cleaning
Optional CharOptional Char
Optional Char
Optional CharOptional Char
If the model is not vented to the outside, the air will be recirculated through disposable charcoal lters that
help remove smoke and odors.
The charcoal lters cannot be cleaned.
They must be replaced.
The charcoal lters are clipped inside of each metal grease lter (mounting instructions included with charcoal
lters kit).
The charcoal lters should be replaced every 4-6 months (depending on hood usage).
NOTE: NOTE:
NOTE: DO NOT rinse, or put charcoal lters in an automatic dishwasher.
NOTE: NOTE:
NOTE: NOTE:
NOTE: Charcoal lters are
NOTE: NOTE:
They must be ordered from your supplier.
Order the needed kit specifying your hood model and width size.
CharChar
coal lter placement (Recircoal lter placement (Recir
Char
coal lter placement (Recir
CharChar
coal lter placement (Recircoal lter placement (Recir
Fit the charcoal lter mattress on the upper side of each grease lter.
Use provided springs to x it in place.
Note: Note:
Note: When removing for replacing for a new one do not remove Fixing Springs, simply pull out and rotate
Note: Note:
outwards.
coal Filterscoal Filters
coal Filters
coal Filterscoal Filters
not not
not included with the hood.
not not
culating accessories)culating accessories)
culating accessories)
culating accessories)culating accessories)
CleaningCleaning
Cleaning
CleaningCleaning
tAlways use the mildest cleaner that will do the
job. Use clean, soft cloths, sponges or paper
towels.
tRub stainless steel nishes in the direction of the
grain. Wipe area dry to avoid water marks.
tAfter cleaning, place all parts in their proper
positions before using.
The cleaners recommended below indicate a type
and do not constitute an endorsement. Use all
products according to package directions.
Hood SurfaceHood Surface
Hood Surface
Hood SurfaceHood Surface
Painted Surfaces: Painted Surfaces:
Painted Surfaces: For general care, wipe the outside
Painted Surfaces: Painted Surfaces:
of the hood with sudsy water or household cleaners
such as Fantastic or Formula 409, rinse well and dry
with a clean soft cloth to avoid water marks.
Stainless Steel Surfaces:Stainless Steel Surfaces:
Stainless Steel Surfaces: Wipe and dry stainless
Stainless Steel Surfaces:Stainless Steel Surfaces:
steel in the same direction as the grain. Avoid using
too much pressure, which may mar the surface. To
remove nger prints and give added shine, use
cleaners such as Stainless Steel Magic. Do not allow
any cleaning compounds to remain in contact with
stainless steel for extended periods.
Plastic surfaces:Plastic surfaces:
Plastic surfaces: Wipe with a moist soapy sponge.
Plastic surfaces:Plastic surfaces:
Rinse and dry.
Aluminum Mesh Filters: Clean lters in the dishwasher or by agitating in sudsy water. Ensure that
there is no soil trapped in the ne mesh. Dry the
lters before reinstalling them.
Anodized Aluminum surfaces: Anodized Aluminum surfaces:
Anodized Aluminum surfaces: Top cap is not remov-
Anodized Aluminum surfaces: Anodized Aluminum surfaces:
able. Wash top and underside with hot sudsy water.
Rinse and wipe dry or apply Fantastic® or Formula
409® rst to a clean sponge or paper towel and
wipe clean. DO NOT USE powdered cleansers or
steel wool pads.
Page 21
Warranty Information
Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolux will pay
all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when
such appliance is installed, used and maintained in accordance with the provided instructions.
2121
21
2121
Exclusions
This warranty does not cover the following:
1. Products with original serial numbers that have been removed, altered or cannot be readily determined.
2. Product that has been transferred from its original owner to another party or removed outside the USA
or Canada.
3. Rust on the interior or exterior of the unit.
4. Products purchased “as-is” are not covered by this warranty.
5. Food loss due to any refrigerator or freezer failures.
6. Products used in a commercial setting.
7. Service calls which do not involve malfunction or defects in materials or workmanship, or for appliances
not in ordinary household use or used other than in accordance with the provided instructions.
8. Service calls to correct the installation of your appliance or to instruct you how to use your appliance.
9. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards,
shelves, etc., which are not a part of the appliance when it is shipped from the factory.
10. Service calls to repair or replace appliance light bulbs, air lters, water lters, other consumables, or
knobs, handles, or other cosmetic parts.
11. Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip
charges, or mileage expense for service calls to remote areas, including the state of Alaska.
12. Damages to the nish of appliance or home incurred during installation, including but not limited to
! oors, cabinets, walls, etc.
13. Damages caused by: services performed by unauthorized service companies; use of parts other than
genuine Electrolux parts or parts obtained from persons other than authorized service companies; or
external causes such as abuse, misuse, inadequate power supply, accidents, res, or acts of God.
DISCLAIMER OF IMPLIED
CUSTOMER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT
REPAIR OR REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES,
INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE
YEAR. ELECTROLUX SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH
AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS
WRITTEN LIMITED WARRANTY OR ANY IMPLIED WARRANTY. SOME STATES AND PROVINCES DO
NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR
LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, SO THESE LIMITATIONS OR EXCLUSIONS
MAY NOT APPLY TO YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY
ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.
WARRANTIES; LIMITATION OF REMEDIES
If You Need
Service
This warranty only applies in the USA and Canada. In the USA, your appliance is warranted by Electrolux Major Appliances
North America, a division of Electrolux Home Products, Inc. In Canada, your appliance is warranted by Electrolux Canada Corp.
Electrolux authorizes no person to change or add to any obligations under this warranty. Obligations for service and parts
under this warranty must be performed by Electrolux or an authorized service company. Product features or speci cations as
described or illustrated are subject to change without notice.
USA
1.800.944.9044
Electrolux Major Appliances
North America
P.O. Box 212378
Augusta, GA 30907
Keep your receipt, delivery slip, or some other appropriate payment record to establish the warranty period
should service be required. If service is performed, it is in your best interest to obtain and keep all receipts.
Service under this warranty must be obtained by contacting Electrolux at the addresses or phone
numbers below.
Canada
1.800.265.8352
Electrolux Canada Corp.
5855 Terry Fox Way
Mississauga, Ontario, Canada
L5V 3E4
Page 22
LI28OC
Loading...