The Fits-More™ cooktop features five
burners so you can cook more at once.
Stainless Steel Recessed Cooktop
Available in:
Stainless
(S)
Burners
Right Front
Right Rear
Left Front
Left Rear
Center
BTU
12,000
5,000
9,500
9,500
500 to 17,000
PowerPlus® Boil
Boil water fast.
Pro-Select® Controls
Precise control at your fingertips.
PowerPlus® FullRange Burner
Go from a 500-BTU simmer to a
17,000-BTU boil quickly.
Continuous Grates
Continuous grates make it easy to
move heavy pots and pans between
burners without lifting.
frigidaire.com
A
B
C
Features
Controls
Surface Type
Sealed Gas Burners
Grates
Right Front Burner (BTU)
Right Rear Burner (BTU)
Left Front Burner (BTU)
Left Rear Burner (BTU)
Center Burner (BTU)
Control Location
Knob Color
Knob Type
Pro-Select®
Stainless Steel Recessed
Yes
Continuous Cast Iron
w/Black Matte Finish
12,000
5,000
9,500
9,500
500 to 17,000
Right Side
Stainless
Cast Metal
Specifications
Power Supply Connection Location
Gas Supply Connection Location
LP Gas Conversion Kit
Voltage Rating
Amps @ 120 Volts
1
Minimum Circuit Required (Amps)
Approved for Electric Single
Wall Oven Combination Installation
Shipping Weight (Approx.)
1
For use on adequately wired 120V, dedicated circuit having 2-wire
service with a separate ground wire. Appliance must be grounded
for safe operation.
2
Cooktops are approved for installation above any of our Electric Single
Wall Ovens.
Right Rear
Right Rear
Included
120V / 60 Hz / 15A
1.0
15
Yes
2
60 Lbs.
Built-In Cooktop
FPGC3685K S 36" Gas
NOTE: For planning purposes only. Always consult local and national electric and gas codes.
Refer to Product Installation Guide for detailed installation instructions on the web
at frigidaire.com.
D - Width (min. - max.)E - Depth (min. - max.) F - Height (min.)*Power SupplyGas Supply
33-7/8" - 34-1/4"19-1/8" - 19-3/4"
Built-In Cooktop Specifications
•
Product Shipping Weight (approx.) – 60 Lbs.
•
Voltage Rating – 120V / 60 Hz / 15 Amps
•
For use on adequately wired 120V, dedicated circuit having 2-wire
service with a separate ground wire. Appliance must be grounded
for safe operation.
•
Amps @ 120 Volts = 1.0
•
Always consult local and national electric and gas codes.
•
Cooktop cutout height includes clearance needed beneath cooktop
to allow for gas supply connection. Recommended location for
grounded 120V outlet is on rear wall in an 8"-wide by 10"-high area,
positioned 22" above floor surface and 4" from right side of cooktop
centerline. Access to underside of cooktop and junction box must
be provided for inspection and service.
•
Cooktop ships with 3/4" factory regulator.
•
LP Gas conversion kit supplied.
•
Overhead cabinetry should not exceed a 13" maximum depth.
•
Absolute minimum horizontal distance between overhead cabinets
installed to either side of appliance must be no less than 36".
•
Allow 30" minimum clearance between top of cooktop platform and
bottom of unprotected wood or metal overhead cabinet.
•
Allow 2" minimum distance between rear edge of cutout and adjacent
combustible surface (or backsplash).
8"36"Right RearRight Rear
Required Clearances
K - Cabinet Opening Width
•
Allow 7" minimum required clearance from left edge of cooktop to
adjacent combustible surface and 7" minimum from right edge of
cooktop to adjacent combustible surface.
•
Installation of drawer beneath cooktop requires 6-1/2" minimum
clearance beneath countertop surface, and assured clearance for gas
and electrical connections.
•
To reduce risk of fire when using overhead cabinetry, install range
hood that projects horizontally a recommended minimum of 5"
beyond bottom of cabinets.
•
Gas Built-In Cooktop model FPGC3685K is approved to be used
over any Frigidaire® Electric Single Wall Oven. (Refer to Gas Cooktop
Installation Over 30" / 27" Electric Single Wall Oven Specifications
page on web.)
•
Gas Built-In Cooktop model FPGC3685K is approved to be used in
combination with Frigidaire® 36" Downdraft Vent E36DD75ESS or
PL36DD50EC. (Refer to model-specific Downdraft Vent product page
on web for detailed countertop preparation specifications.)
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.com for detailed instructions.
5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • frigidaire.ca
•
Charlotte, NC 28262
•
1-800-FRIGIDAIRE
•
frigidaire.com
Gas Cooktop Installation Over
30"/ 27" Electric Single Wall Oven Specifications
All Frigidaire® Electric Single Wall Ovens are approved to be used
beneath any approved Frigidaire® Gas Cooktop. (This installation page
excludes approved wall oven model GLEB27Z7H. For model-specific
installation details, refer to Gas Cooktop Installation Over 27" Electric
Single Wall Oven GLEB27Z7H Specifications pages on web.)
For detailed Gas Cooktop installation, refer to model-specific product
page and installation guide on web.
•
Side filler panel height may need to be modified to accommodate the
depth of approved gas cooktop models.
•
Minimum height opening of 6-1/2" (from top of counter) required in
right side filler panel, to route gas and electric hookups.
•
Allow 4-1/2" maximum height from oven base to floor, if cooktop is
installed directly over wall oven.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.com for detailed instructions.
Specifications
subject to change.
Combination Frigidaire Gas Cooktop/ 27" ElectricSide-Swing Wall Oven Under-Counter InstallationFrigidaire Gallery Model GLEB27Z7H
Gas Cooktop Installation
Over 27" Electric Single Wall Oven (GLEB27Z7H)
27" Electric Single Wall Oven (GLEB27Z7H)
Under-Counter Installation Specifications
•
Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz
AC only electrical supply with ground required on separate circuit
fused on both sides of line.
•
For detailed electrical requirements, refer to model-specific product
page and installation guide on web.
•
Always consult local and national electric codes.
•
Minimum 27-1/4" clearance for oven door depth when open.
•
Minimum 23-1/2" deep cutout dimension is critical for proper
installation, to ensure that oven’s faceplate will fit flush against
cabinet front.
•
Minimum 4-1/2" distance required from door hinge side of oven’s
cutout opening to any adjoining cabinetry or wall, to allow sufficient
clearance for oven rack removal.
•
Side filler panels necessary to isolate oven from adjoining cabinets.
•
Oven base of solid plywood or similar material required, capable of
supporting 150 Lbs. Install over two runners and flush with toe plate.
•
Base must be level and cabinet front must be square.
•
Recommended that bottom of cabinet remain partially opened to
permit free air circulation, avoiding possible water condensation
which may appear inside control panel while operating oven.
•
Allow 5" maximum height from oven base to floor, if NO cooktop is
installed directly over wall oven.
Gas Cooktop Installation Over
27" Electric Single Wall Oven (GLEB27Z7H) Specifications
Frigidaire® Single Wall Oven model GLEB27Z7H is approved to be used
beneath any approved Frigidaire® Gas Cooktop.
For detailed Gas Cooktop installation, refer to model-specific product
page and installation guide on web.
•
•
•
Note: For planning purposes only. Refer to Product Installation Guide
Side filler panel height may need to be modified to accommodate the
depth of approved gas cooktop models.
Minimum height opening of 6-1/2" (from top of counter) required in
right side filler panel to route gas and electric hookups.
Allow 4-1/2" maximum height from oven base to floor, if cooktop is
installed directly over wall oven.
on the web at frigidaire.com for detailed instructions.