All about the
Use&Care
of your Refrigerator
TA B L E O F C O N T E N T S
Important Safety Instructions...................... |
2 |
Features At A Glance................................... |
4 |
Installation................................................. |
5 |
Door Removal/Reversal Instructions............. |
7 |
Handle Installation.................................... |
10 |
Connecting Water Supply.......................... |
12 |
Ice Service............................................... |
14 |
Controls................................................... |
15 |
Optional Features...................................... |
17 |
Normal Operating Sounds and Sights......... |
20 |
Care and Cleaning..................................... |
21 |
Before you Call......................................... |
23 |
Major Appliance Warranty.......................... |
24 |
www.frigidaire.com USA 1-800-944-9044 |
www.frigidaire.ca Canada 1-800-265-8352 |
2016) (October 807876507
IMPORTANT SAFETY INSTRUCTIONS
WARNING
Please read all instructions before using this refrigerator.
For your Safety
•DO NOT store or use gasoline, or other flammable liquids in the vicinity of this or any other appliance. Read product labels for warnings regarding flammability and other hazards.
•DO NOT operate the refrigerator in the presence of explosive fumes.
•Avoid contact with any moving parts of automatic ice maker.
•Remove all staples from the carton. Staples can cause severe cuts, and also destroy finishes if they come in contact with other appliances or furniture.
Definitions
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
DANGER
DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Installation Checklist
Doors
Handles are secure and tight
Door seals completely to cabinet on all sides
Freezer door is level across the top
Leveling
Refrigerator is level, side-to-side and tilted ¼” (6mm) front-to-back
Toe grille is properly attached to refrigerator
Cabinet is setting solid on all corners
Anti-tip bracket set
Electrical Power
House power turned on
Refrigerator plugged in
Ice Maker
House water supply connected to refrigerator
No water leaks present at all connections - recheck in 24 hours
Ice maker is turned ON
Ice & water dispenser operates correctly
Front filter must be flush with filter housing (select models)
Final Checks
Shipping material removed
Refrigerator and freezer temperatures set
Crisper humidity controls set
Registration card sent in
WARNING
WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
IMPORTANT
IMPORTANT indicates installation, operation or maintenance information which is important but not hazard-related.
Child Safety
Destroy or recycle the carton, plastic bags, and any exterior wrapping material immediately after the refrigerator is unpacked. Children should never use these items to play. Cartons covered with rugs, bedspreads, plastic
sheets or stretch wrap may become airtight chambers, and can quickly cause suffocation.
Proper Disposal of your Refrigerator or Freezer
Risk of child entrapment
Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators or freezers are still dangerous – even if they will sit for “just a few days”. If you are getting rid of your old refrigerator or freezer, please follow the instructions below to help prevent accidents.
2
IMPORTANT SAFETY INSTRUCTIONS
Proper Disposal of Refrigerators/Freezers
We strongly encourage responsible appliance recycling/disposal methods. Check with your utility company or visit www.energystar.gov/recycle for more information on recycling your old refrigerator.
Before you throw away your old refrigerator/ freezer:
•Remove doors.
•Leave shelves in place so children may not easily climb inside.
•Have refrigerant removed by a
qualified service technician.
•Do not plug the unit into an electrical outlet controlled by a wall switch or pull cord to prevent the refrigerator from being turned off accidentally.
IMPORTANT
Turning the Refrigerator controls to “0” (Mechanical controls) or “OFF” (Electronic controls) will disable your refrigerator’s cooling system, but does not disconnect the power to the light bulb and other electrical components. To turn off power to your refrigerator you must unplug the power cord from the electrical outlet.
Grounding type wall receptacle
WARNING
These guidelines must be followed to ensure that safety mechanisms in this refrigerator will operate properly.
WARNING
Do not attempt to replace LED lights due to high voltage exposure. Call customer service to replace.
Electrical information
•The refrigerator must be plugged into its own dedicated 115 Volt, 60 Hz., 15 Amp, AC only electrical outlet. The power cord of the appliance is equipped with a three-prong grounding plug for your protection against electrical shock hazards. It must be plugged directly into a properly grounded three prong receptacle. The receptacle must be installed in accordance with local codes and ordinances. Consult a qualified electrician. Avoid connecting refrigerator to a Ground Fault Interrupter (GFI) circuit. Do not use an extension cord or adapter plug.
•If the power cord is damaged, it should be replaced by an authorized service technician to prevent any risk.
•Never unplug the refrigerator by pulling on the power cord. Always grip the plug firmly, and pull straight out from the receptacle to prevent damaging the power cord.
•Unplug the refrigerator before cleaning and before replacing a light bulb to avoid electrical shock.
•Performance may be affected if the voltage varies by 10% or more. Operating the refrigerator with insufficient power can damage the compressor. Such damage is not covered under your warranty.
Do not, under
any circumstances, cut, remove,
or bypass the grounding prong.
Power cord with 3-prong grounded plug
CAUTION
To avoid personal injury or property damage, handle tempered glass shelves carefully. Shelves may break suddenly if nicked, scratched, or exposed to sudden temperature change.
IMPORTANT
CFC/HCFC Disposal
Your old refrigerator may have a cooling system that used CFCs
or HCFCs (chlorofluorocarbons or hydrochlorofluorocarbons). CFCs and
HCFCs are believed to harm stratospheric ozone if released to the atmosphere. Other refrigerants may also cause harm to the environment if released to the atmosphere.
If you are throwing away your old refrigerator, make sure the refrigerant is removed for proper disposal by a qualified technician. If you intentionally release refrigerant, you may be subject to fines and imprisonment under provisions of environmental legislation.
3
FEATURES AT A GLANCE
Features may vary according to model
Ice Maker |
Ice Tray |
|
Ice Bucket |
Fixed Door Bin |
|
Freezer Shelf |
Door Rack |
|
Auxiliary Freezer |
||
|
||
Control |
Dairy Door |
|
Refrigerator |
||
Control |
|
|
(Some Models) |
|
|
Deli Drawer |
Upper Door |
|
Cover |
||
Deli Drawer |
Rack |
|
|
||
(Some Models) |
|
|
Half Shelf |
|
|
Deli Drawer |
|
|
Cover |
Fixed |
|
Full Width Deli |
||
(Some Models) |
Door Bin |
|
Crisper Cover |
Door Rack |
|
|
||
Crisper Drawers |
|
|
|
Toe Grille |
IMPORTANT
Cleaning your Refrigerator
Remove tape and glue residue from surfaces before turning on the refrigerator. Rub a small amount of liquid dish soap over the adhesive with your fingers. Rinse with warm water and dry with a soft cloth.
Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator.
After you remove all of the package materials, clean the inside of your refrigerator before using it. See the “Care & Cleaning” section in this manual.
See important information about cleaning glass shelves and covers in the “Optional Features” section of this manual.
IMPORTANT
Moving your Refrigerator
Your refrigerator is heavy. When moving the refrigerator for cleaning or service, be sure to cover the floor with cardboard or hardboard to avoid floor damage. Always pull the
refrigerator straight out when moving it. Do not wiggle or “walk” the refrigerator when trying to move it as floor damage could occur.
4
This Use & Care Guide provides general operating instructions for your model. Use the refrigerator only as instructed in this Use & Care Guide. Before starting the refrigerator, follow these important first steps.
Location
•Choose a place that is near a grounded electrical outlet. Do Not use an extension cord or an adapter plug.
•If possible, place the refrigerator out of direct sunlight and away from the range, dishwasher or other heat sources.
•The refrigerator must be installed on a floor that is level and strong enough to support a fully loaded refrigerator.
•Consider water supply availability for models equipped with an automatic ice maker. If you do not hook up water to the refrigerator, remember to turn the ice maker off.
CAUTION
Do not install the refrigerator where the surrounding air temperature may fall to 39°F (4°C) or below. The refrigerator compartment contents may freeze. Do not install the refrigerator where the surrounding air temperature may reach 110°F (43°C) or above. The refrigerator and freezer compartments may rise to above normal operating temperatures.
Do not block the toe grille on the lower front of yourrefrigerator.Sufficient aircirculationisessential for the proper operation of your refrigerator.
NOTE
For additional instructions on garage installation, refer to “Controls” section.
INSTALLATION
Guidelines for final positioning of your refrigerator:
•All four corners of the cabinet must rest firmly on the floor.
•The cabinet should be level at the front and rear.
•The sides should tilt ¼-inch (6 mm) from front-to-back (to ensure that doors close and seal properly).
•Doors should align with each other and be level.
To install the toe grille:
1.The toe grille is packaged with the covers installed. Remove the cover on the side corresponding with the door hinge bracket.
2. Attach toe grille to cabinet.
or
Installation
Installation clearances
•Allow the following clearances for ease of installation, proper air circulation, and plumbing and electrical connections:
Sides & Top |
⅜ inch |
Back |
1 inch |
NOTE
If your refrigerator is placed with the door hinge side against a wall, you may have to allow additional space for the handle so the door can be opened wider.
some models
NOTE
In case of future door reversals, save the toe grille cover not being used.
5
INSTALLATION
To level the cabinet using the front rollers:
1 Remove the toe grille.
2Use a flat-blade screwdriver or ⅜ inch socket wrench to raise or lower the front rollers (Figure 2). Do not raise the cabinet more than 9/16 inch.
Raise
9/16" (14 mm) Max
Figure 2
OR
3Use adjustable wrench to adjust leveling screws. Lower the leveling screws on each side clockwise until they contact the floor
(Figure 3). Do not raise the cabinet more than 9/16 inch.
9/16" (14 mm) Max
Raise
Figure 3
NOTE
Raise the front of the refrigerator enough so the doors close freely when opened halfway. The refrigerator should slope ¼ inch to
½ inch from front-to-back. Then level the refrigerator from side-to-side.
4Some models are equipped with an antitip bracket (Figure 4). Lower it clockwise until it contacts the floor.
Lower
Anti-tip
Bracket
Figure 4 (some models)
WARNING
The anti-tip device must be installed according to the instructions in your Use & Care Manual. Failure to do so will result in injury.
WARNING
When reversing the door swing:
You MUST move the anti-tip bracket to align with the hinges of the door. Failure to do so will result in injury.
6
DOOR REMOVAL/REVERSAL INSTRUCTIONS
Tools Necessary:
or
PhillipsTM |
|
Socket |
Adjustable |
Head |
|
Wrench Set |
Wrench |
|
|
Top Hinge |
Top Hinge |
|
|
Cover Front |
Cover Rear |
|
|
Screw |
Screw |
or |
|
|
|
|
3/8" (10mm) |
Top |
|
|
Fixed |
Bottom |
|
|
Hinge |
||
|
Wrench |
||
|
Screw |
Hinge |
|
|
|
||
|
|
|
Screw |
NOTE
The direction in which your refrigerator doors open (door swing) can be reversed, from left to right or right to left, by moving the door hinges from one side to the other. Reversing the door swing should be performed by a qualified person.
IMPORTANT
Before you begin, turn the refrigerator temperature control to “0” (Mechanical controls) or “OFF” (Electronic controls) and remove the electrical power cord from the wall outlet. Remove any food from door shelves.
Door removal and reversal instructions:
1.Remove toe grille.
2.Remove top hinge cover. Trace around the hinge with a soft lead pencil. This makes reinstallation easier. Remove top hinge and lift door off center hinge pin. Set door aside.
3.Unscrew center hinge pin using adjustable wrench and save for reassembly. Ensure plastic washer stays on hinge pin.
Top
Hinge
Cover
Top Hinge
7
DOOR REMOVAL/REVERSAL INSTRUCTIONS
4.Lift refrigerator door off of bottom hinge and set aside.
5.Remove center hinge and shim by removing inside screw and loosening two outside screws enough to allow hinge and shim to slide out. Tighten screws.
6.Loosen two outside screws on opposite side of refrigerator, remove inside screw and install center hinge.
Door Stop |
Door |
Screw |
Stop |
|
Washer |
|
Hinge |
|
Pin |
|
Bottom |
|
Hinge |
|
Screws |
Door |
Door |
|
Stop |
Stop |
|
Screw |
Washer |
|
Shim |
||
Hinge |
||
|
Pin |
|
|
Center |
|
|
Hinge |
Toe
Grille
OR
Hinge |
Screws |
Hole |
Handle |
Plug |
|
|
Hole |
|
Plug |
7.Remove three screws on bottom hinge and anti-tip bracket (if equipped) with ⅜” socket wrench.
8.Remove toe grille support and screws (if equipped).
WARNING
When reversing the door swing:
You MUST move the anti-tip bracket to align with the hinges of the door and install the toe grille support for proper balance. Failure to do so will result in injury.
9.Install bottom hinge and anti-tip bracket
(if equipped) on opposite side with the three screws removed from step 7.
10. Unscrew bottom hinge pin using adjustable wrench. Move hinge pin to other hole in hinge and tighten with adjustable wrench.
11. Install toe grille support and screws on opposite side (if equipped).
Lower
Anti-tip
Bracket
12. Reverse door handles (see Handle Installation section).
13. Move freezer and refrigerator door stops to opposite side. Before starting screws, use an awl to puncture the foam.
14. Position refrigerator door onto bottom hinge pin and screw center hinge pin through center hinge into top of door. Close refrigerator door to help align hinge hole.
15. Tighten center hinge pin with adjustable wrench.
16. Remove cabinet and hinge hole plugs and move to opposite side.
17.Lower freezer door onto center
hinge pin.
18. Close freezer door. Lift up
on handle side of door
and grasp the thinnest part
of the top
hinge cover (which was removed in Step 2) and insert the thickest part between the doors on the handle side approximately
3 inches from the outside edge. This will ensure proper spacing.
8