All about the
Use & Care
of your
www.frigidaire.com USA 1-800-944-9044 www.frigidaire.ca Canada 1-800-265-8352
Wall Oven
Product Record and Registration . . . . . . . . . . . . . . 2
Important Safety Instructions . . . . . . . . . . . . . . . . . 3
Cooking Recommendations . . . . . . . . . . . . . . . . . . 9
Before Setting Oven Controls . . . . . . . . . . . . . . . . 12
TABLE OF CONTENTS
Oven Controls Functions . . . . . . . . . . . . . . . . . . . . 13
Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . 19
Before You Call . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
A00327403 Rev C (May 2018)
PRODUCT RECORD AND REGISTRATION
Product Record and Registration . . . . . . . . . . . . . . . . . 2
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . 3
Cooking Recommendations . . . . . . . . . . . . . . . . . . . . . 9
Before Setting Oven Controls . . . . . . . . . . . . . . . . . . . 12
Oven Controls Functions . . . . . . . . . . . . . . . . . . . . . . 13
Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Before You Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Questions?
For toll-free telephone support in the U.S. and Canada call
1-800-944-9044.
For online support and Internet production information visit
http://www.frigidaire.com.
Thank you for choosing Frigidaire.
Need Help?
Visit the Frigidaire web site at www.frigidaire.com
Before you call for service, there are a few things you can
do to help us serve you better.
Read this Use and Care Manual
This manual contains instructions to help you use and
maintain your range properly.
If You Received a Damaged Range...
Immediately contact the dealer (or builder) that sold you the
range.
Save Time and Money
Check “Before You Call” on page 23. This section helps
step you through some common problems that might occur.
Need service? Call Frigidaire Customer Services at 1-800-
944-9044.
Product Registration
Registering your product with Frigidaire enhances our
ability to serve you. Register online at www.frigidaire.com
or by dropping your Product Registration Card in the mail.
Record model and serial numbers here
Purchase Date
Important: This Use and Care Guide is part of our commit-
ment to customer satisfaction and product qu alit y
throughout the service life of your new appliance. We view
your purchase as the beginning of a relationship. To ensure
our ability to continue serving you, please use this page to
record important product information.
Frigidaire model number
Frigidaire serial number
Serial Plate Location
Serial plate location: open oven door and look on left side of
oven frame
2
2018 Electrolux Home Products, Inc. All rights reserved. Printed in the USA
Read all instructions before using this appliance.
WARNING
CAUTION
IMPORTANT
NOTE
IMPORTANT SAFETY INSTRUCTIONS
This manual contains important safety symbols
and instructions. Please pay attention to these
symbols and follow all instructions given.
Do not attempt to install or operate your appliance
until you have read the safety precautions in this
manual. Safety items throughout this manual are
labeled with a WARNING or CAUTION statement
based on the risk type.
Warnings and important instructions appearing in
this guide are not meant to cover all possible
conditions and situations that may occur.
Common sense, caution, and care must be
exercised with installing, maintaining, or operating
your appliance.
DEFINITIONS
This is the safety alert symbol. It is used to
alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol
to avoid possible injury or death.
Indicates a potentially hazardous situation
which, if not avoided, may result in death or
serious injury.
If the information in this manual
is not followed exactly , a fire or explosion may
result causing property damage, personal
injury or death.
FOR YOUR SAFETY: Do not store or use
gasoline or other flammable vapors and
liquids in the vicinity of this or any other appliance.
WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical switch.
• Do not use any phone in your building.
• Immediately call your gas supplier from a
neighbor's phone. Follow the gas
supplier's instructions.
• If you cannot reach your gas supplier, call
the fire department.
Installation and service must be performed by
a qualified installer, servicer, or the gas
supplier.
Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
Indicates installation, operation, maintenance,
or valuable information that is not hazard
related.
Indicates a short, informal reference –
something written down to assist the memory or
for future reference.
3
IMPORTANT SAFETY INSTRUCTIONS
Tip Over Hazard
• A child or adult can tip the
oven and be killed.
• Install the anti-tip device
to oven and/or structure
per installation instructions.
• Ensure the anti-tip device is
re-engaged when the oven is moved.
• Do not operate the oven without the
anti-tip device in place and engaged.
• Failure to follow these instructions can
result in death or serious burns to
children and adults.
Refer to the installation
instructions supplied with
your appliance for proper
installation.
Anti-tip mounting holes
Check for proper installation with a visual
check that the anti-tip screws are present. Test
the installation with light downward pressure
on the open oven door. The oven should not
tip forward.
WARNING
IMPORTANT INSTRUCTIONS FOR
WARNING
UNPACKING AND INSTALLATION
IMPORTANT - Read and follow the below instructions and precautions for unpacking, installing,
and servicing your appliance:
Remove all tape and packaging before using the
appliance. Destroy the carton and plastic bags
after unpacking the appliance. Never allow
children to play with packaging material. Do not
remove the wiring label and other literature
attached to the appliance. Do not remove model/
serial number plate.
Cold temperatures can damage the electronic
control. When using this appliance for the first
time, or when the appliance has not been used
for an extended period of time, be sure the
appliance has been in temperatures above 32ºF
(0ºC) for at least 3 hours before turning on the
power to the appliance.
Never modify or alter the construction of the
appliance by removing the leveling legs, panels,
wire covers, anti-tip brackets/screws, or any other
part of the appliance.
Be sure to have an appropriate foam-type fire
extinguisher available, visible, and easily accessible located near the appliance.
GROUNDING INSTRUCTIONS
Avoid fire hazard or electrical shock. Failure to
follow this warning may cause serious injury,
fire, or death.
4
Avoid fire hazard or electrical shock. Do not use
an adapter plug, use an extension cord, or
remove grounding prong from the power cord.
Failure to follow this warning may cause serious
injury, fire, or death.
IMPORTANT SAFETY INSTRUCTIONS
Do not cut, remove, or
bypass the grounding
plug under any
circumstances.
Grounding type
wall receptacle
Power supply cord
with 3-prong
grounding plug
WARNING
Proper Installation—Be sure your appliance is
properly installed and grounded by a qualified
technician. In the United States, install in accordance with the National Fuel Gas Code ANSI
Z223.1/NPFA No. 54, latest edition and National
Electrical Code NFPA No. 70 latest edition, and
local electrical code requirements. In Canada,
install in accordance with CAN/CGA B149.1 and
CAN/CGA B149.2 and CSA Standard C22.1,
Canadian Electrical code, Part 1-latest editions
and local electrical code requirements. Install only
per installation instructions provided in the literature package for this appliance.
For personal safety, this appliance must be
properly grounded. For maximum safety, the
power cord must be securely connected to an
electrical outlet or junction box that is the correct
voltage, is correctly polarized and properly
grounded, and protected by a circuit breaker in
accordance with local codes.
It is the personal responsibility of the consumer to
have the appropriate outlet or junction box with
the correct, properly grounded wall receptacle
installed by a qualified electrician. It is the responsibility and obligation of the consumer to contact a
qualified installer to assure that the electrical
installation is adequate and is in conformance
with all local codes and ordinances.
This appliance is equipped with a 3-prong
grounding plug for your protection against shock
hazard and should be plugged directly into a
properly grounded receptacle. Do not cut or
remove the grounding prong from this plug.
For personal safety, the appliance must be
properly grounded. For maximum safety, the
power cord must be plugged into an electrical
outlet that is correctly polarized and properly
grounded.
If a 2-prong wall receptacle is the only available
outlet, it is the personal responsibility of the
consumer to have it replaced with a properly
grounded 3-prong wall receptacle, installed by a
qualified technician.
Conversion to (L.P.) Gas
This appliance allows for conversion to
Liquefied Petroleum (L.P.) Gas.
Personal injury or death from electrical shock
may occur if the conversion to L.P. gas is not
made by a qualified installer or electrician. Any
additions, changes or conversions required in
order for this appliance to satisfactorily meet the
application needs must be made by a qualified
technician.
If L.P. conversion is needed, contact your local
L.P. Gas provider for assistance.
See the installation instructions packaged with
this appliance for complete installation and
grounding instructions.
5
IMPORTANT SAFETY INSTRUCTIONS
WARNING
WARNING
CAUTION
IMPORTANT INSTRUCTIONS FOR USING THE
APPLIANCE
Storage In or On Appliance—Flammable
materials should not be stored in an oven or
microwave, near surface burners or elements,
or in the storage or warmer drawer (if
equipped). This includes paper, plastic, and
cloth items, such as cookbooks, plastic ware,
and towels, as well as flammable liquids. Do not
store explosives, such as aerosol cans, on or
near the appliance.
Do not leave children alone - Children should
not be left alone or unattended in the area
where appliance is in use. They should never
be allowed to sit or stand on any part of the
appliance, including the storage drawer, lower
broiler drawer , warmer drawer, or lower double
oven.
Do not store items of interest to children in the
cabinets above the appliance or on the backguards of ranges. Children climbing on or near
the appliance to reach items could be seriously
injured.
Do not allow children to climb or play around the
appliance. The weight of a child on an open
over door may cause the appliance to tip,
resulting in serious burns or other injury. An
open drawer when hot may cause burns.
Stepping, leaning, or sitting on the door or
drawers of this appliance can result in serious
injuries and also cause damage to the appliance.
Never cover any slots, holes, or passages in the
oven bottom or cover an entire oven rack with
any materials, such as aluminum foil or aftermarket oven liners. Doing so blocks air flow
through the oven and may cause cardon
monoxide poisoning. Aluminum foil and other
liners may trap heat, causing a fire hazard.
Do not use oven or warmer drawer (if equipped)
for storage.
Never use your appliance as a space heater to
heat or warm the room. Doing so may result in
carbon monoxide poisoning and overheating of
the appliance.
When heating fat or grease, watch it closely.
Grease may catch fire if it becomes too hot.
Do not use water or flour on grease fires.
Smother fire or flame or use dry chemical or
foam-type extinguisher. Cover the fire with a
pan lid or use baking soda.
Use dry potholders. Moist or damp potholders
on hot surfaces may result in burns from steam.
Do not let potholders touch hot cooking areas.
Do not use towels or other bulky cloths.
Do not heat unopened food containers - Buildup of pressure may cause container to burst
and result in injury.
Wear proper apparel - Loose-fitting or hanging
garments should never be worn while using the
appliance. Do not let clothing or other
flammable materials contact hot surfaces.
Do not touch surface burners or elements,
areas near these burners or elements, interior
surfaces of the oven, or the warmer drawer (if
equipped). Surface burners and elements may
be hot even though they appear cool. Areas
near surface burners and elements may
become hot enough to cause burns. During and
after use, do not touch, or let clothing or other
flammable materials touch these areas until
they are cool. These areas may include the
cooktop, surfaces facing the cooktop, oven vent
areas, oven door, and oven window.
6
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
CAUTION
Do not attempt to operate the appliance during
a power failure. If the power fails, always turn off
the appliance. If the appliance is not turned off
and the power resumes, electric surface
elements may resume operation when power is
restored. Once the power resumes, reset the
clock and the oven function.
IIMPORTANT INSTRUCTIONS FOR USING
YOUR OVEN
Protective liners—Do not use aluminum foil, aftermarket oven liners, or any other materials or
devices to line oven bottom, oven racks, or any
other part of the appliance. Only use aluminum as
recommended for baking, such as lining
cookware or as a cover placed on food. Any other
use of protective liners or aluminum foil may
result in a risk of electric shock or fire or a short
circuit.
Use care when opening oven door, lower oven
door, or warmer drawer (some models). Stand to
the side of the appliance when opening the door
of a hot oven. Let hot air or steam escape before
you remove or replace food in the oven.
Keep oven vent ducts unobstructed. Touching
surfaces in this area when the oven is on may
cause severe burns. Do not place plastic or heatsensitive items on or near the oven vent. These
items can melt or ignite.
Do not use a broiler pan without its insert. Broiler
pans and inserts allow dripping fat to drain away
from the high heat of the broiler. Do not cover the
broiler insert with aluminum foil; exposed fat and
grease could ignite.
Do not cook food on the oven bottom. Always
cook in proper cookware and always use the
oven racks.
IMPORTANT INSTRUCTIONS FOR CLEANING
YOUR APPLIANCE
Before manually cleaning any part of the appliance, be sure all controls are turned off and the
appliance is cool. Cleaning a hot appliance can
cause burns.
Clean the appliance regularly to keep all parts
free of grease that could catch fire. Do not allow
grease to accumulate. Greasy deposits in the fan
could catch fire.
Always follow the manufacturer’s recommended
directions for use of kitchen cleaners and
aerosols. Be aware that excess residue from
cleaners and aerosols may ignite causing
damage and injury.
Clean ventilating hoods frequently - Grease
should not be allowed to accumulate on hood or
filter. Follow the manufacturer’s instructions for
cleaning vent hoods.
Placement of oven racks - Always place oven
racks in desired location while oven is cool. If rack
must be moved while oven is hot, do not let
potholder contact hot burner or element in oven.
Use potholders and grasp the rack with both
hands to reposition. Remove all cookware and
utensils before moving the rack.
7
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT INSTRUCTIONS FOR SERVICE
AND MAINTENANCE
Do not repair or replace any part of the appliance
unless specifically recommended in the manuals.
All other servicing should be done only by a
qualified technician. This reduces the risk of
personal injury and damage to the appliance.
Always contact your dealer, distributor, service
agent, or manufacturer about problems or conditions you do not understand.
Ask your dealer to recommend a qualified technician and an authorized repair service. Know how
to disconnect the power to the appliance at the
circuit breaker or fuse box in case of an emergency.
Remove the oven door from any unused oven if it
is to be stored or discarded.
Do not touch a hot oven light bulb with a damp
cloth. Doing so could cause the bulb to break.
Handle halogen lights (if equipped) with paper
towels or soft gloves. Disconnect the appliance or
shut off the power to the appliance before
removing and replacing the bulb.
Important Safety Notice - The California Safe
Drinking Water and Toxic Enforcement Act
requires the governor of California to publish a list
of substances known to cause cancer, birth
defects, or other reproductive harms, and
requires businesses to warn customers of
potential exposures to such substances.
8
COOKING RECOMMENDATIONS
Bakeware
The material of bakeware affects how evenly and quickly it transfers heat from the pan to the food.
Material Attributes Recommendation
Shiny metal bakeware Shiny, aluminum, and non-coated
bakeware is the best for even heating.
It is suitable for all baked goods.
Dark metal bakeware Dark bakeware cooks hotter than shiny
bakeware.
Glass bakeware Glass bakeware cooks hotter than
shiny bakeware.
Glass is convenient, as the same piece
of bakeware can be used for cooking,
serving, and storing food.
Recommended cooking temperatures and
times are based on shiny metal bakeware.
Reduce the cooking temperature by 25° F
(13-14° C) when using dark bakeware.
Reduce the cooking temperature by 25° F
(13-14° C) when using glass bakeware.
Insulated bakeware Insulated bakeware cooks cooler than
shiny bakeware.
Insulated bakeware is designed for
baking in gas ovens.
Increase the cooking temperature by 25° F
(13-14° C) when using insulated bakeware.
9
COOKING RECOMMENDATIONS
Cooking Conditions
Conditions in your kitchen can affect the performance of your appliance when cooking food.
Condition Attributes Recommendation
Aging cookware As pans age and become discolored,
cooking times may need to be reduced
slightly.
High altitude Air is drier and air pressure is lower.
Water boils at a lower temperature, and
liquids evaporate faster.
Foods may take longer to bake.
Doughs may rise faster.
If food is too dark or overcooked, use the minimum cook
time in the recipe or packaging.
If food is too light or undercooked, use the middle to
maximum cook time in the recipe or packaging.
Adjust cooking temperature, cooking time, or recipes as
needed.
Increase amount of liquid in baking recipes.
Increase cook time on cooktop. Cover dishes to reduce
evaporation.
Increase bake time or oven temperature.
Reduce amount of baking soda or baking powder in
recipe. Reduce rising time or punch down dough and
allow it to rise twice.
Cooking Results
Small adjustments may fix a problem with food not being as done as you like or more done than you like.
Result Recommendation
Food too light Use the middle to maximum cook time recommended on packaging or recipe.
Food too dark Use the minimum cook time recommended on packaging or recipe.
Cooking Tips
Use these additional tips to get the best results from your appliance.
Cooking Tips
Baking
Rack placement Follow the instructions in “Setting Bake” on starting on page 15.
When using only one rack, place the rack so the food is in the center of the oven.
Preheat Fully preheat the oven before baking items like cookies, cakes, biscuits and breads. Insert food
immediately after the beep.
Checking food Use the window and oven light when checking food. Opening the door may reduce baking perfor-
mance.
Food placement Allow at least 2 inches (5 cm) of space between bakeware for proper air circulation.
10
COOKING RECOMMENDATIONS
Cooking Tips
Broiling / Roasting
Broiling pan For best results when broiling, use a broil pan with a broil pan insert designed to drain the fat from
the food, help avoid spatter , and reduce smoking. The broiler pan will catch grease spills, and the
insert helps prevent grease splatters.
Important: If a broiler pan and insert are not supplied with this applia nce, they may be purchased
from Frigidaire.com.
11
WARNING
IMPORTANT
CAUTION
at handle
oven rack
BEFORE SETTING OVEN CONTROLS
Oven Vent Location
The oven vent is located just below the control panel (See
Figure 1). When the oven is on, warm air passes through
this vent. This venting is necessary for proper air circulation
in the oven and good baking results. Do not block the oven
vent. Steam or moisture may appear near the oven vent.
This is normal.
Figure 1: Oven vent location
Protective liners — Do not use aluminum foil or any other
materials to line the oven bottom or any other part of the
oven including oven racks. Only use aluminum foil as
recommended in this manual. Improper installation of
these liners may result in risk of electric shock or fire.
Oven Racks
Flat oven racks may be used for most cooking needs and
may be placed in most oven rack positions.
.
at
oven rack
Figure 2: Oven rack types
Removing, Replacing, and Arranging Oven Racks
T o arrange - Always arrange the oven racks when the oven
is cool (prior to operating the oven).
To remove - Pull the oven rack straight forward until it
reaches the stop position. Lift up front of oven rack slightly
and slide out.
• Remove all racks and accessories from the oven
before cleaning.
• Do not line oven walls, racks, bottom, or any other
range parts with aluminum foil. Doing so will alter heat
distribution, produce poor baking results, and may
cause permanent damage to the oven interior.
Always use pot holders or oven mitts when using the
oven. When cooking, the oven interior , e xterior, and oven
racks become very hot which can cause burns.
To replace - Place the oven rack on the rack guides on
both sides of oven walls. Tilt the front of oven rack upward
slightly and slide the oven rack back into place. Be sure
oven racks are level before using.
12
Oven Control Features
1
2
3
4
5
6
7
8
9
IMPORTANT
NOTE
OVEN CONTROLS FUNCTIONS
1. Oven Light - Use to turn on internal oven light when
checking on food.
2. Bake - Use bake for cooking most foods at normal
cooking temperatures.
3. Broil - Use broil to cook foods that require direct
exposure to radiant heat.
4. Oven indicator light - The oven light will glow each
time the oven turns on to maintain the set oven temper
ature.
5. Preheat indicator light - The preheat light will glow
when the oven is first set to operate, or if the desired
temperature is reset higher than the actual oven
temperature.
6. Up and Down arrows - Use with the feature or function
pads to set oven temperature, bake time, start time,
clean time (when programming an automatic start time) ,
setting or adjusting the clock and minute timer.
7. Timer on-off - Use to set or cancel th e timer. The timer
does not start or stop the cooking process. Timer on-off
is used to set the continuous bake function.
8. Set Clock - Use with up/down arrows to set the time of
day .
9. Off - Use to clear any feature previously entered except
the time of day and minute timer. Press OFF to stop
cooking. Also use OFF to activate oven lockout feature.
Feature Min. Temp/Time Max. Temp/Time
Bake 170°F (77°C) 550°F (288°C)
Broil LO HI
Timer 1 Min. 11:59 Hr./Min.
Clock Time 1:00 Hr./Min. 12:59 Hr./Min.
-
Setting the Clock
When the appliance is first plugged in or when the power
supply to the appliance has been interrupted, the display
will flash
It is recommended to always set the clock for the correct
time of day when power is applied to the appliance.
To set the clock:
1. Press Set Clock once (do not hold clock key down).
2. Within 5 seconds, press and hold the or until the
The clock cannot be changed when the oven is set for
cooking or self clean is active.
12:00.
correct time of day appears in the display.
13
OVEN CONTROLS FUNCTIONS
NOTE
NOTE
Changing Between Continuous Bake Setting or 12-Hour Energy Saving Feature
The oven control has a built-in 12-Hour Energy Saving
feature that will shut off the oven if the oven is left on for
more than 12 hours. The oven control can be programmed
to override this feature for continuous baking.
To change to continuous bake:
1. Press and hold timer on-off for 6 seconds until a tone
sounds. The display will show — — hr for continuous
cooking. The current time of day will return to the
display.
2. To cancel the continuous bake setting, press and hold
timer
on-off for 6 seconds until a tone sounds. The
display will again show 12 hr, indicating that the con trol
has returned to the 12-Hour Energy Saving feature.
Changing the Temperature Display (F or C)
The electronic oven control is set to display Fahrenheit (F)
when shipped from the factory. The display may be set to
show either Fahrenheit or Celsius (C) oven temperatures
from 170°F to 550°F (77°C to 288°C).
To change the temperature display:
1. Press broil. The display will show — —.
2. Press and hold until HI appears in the display.
3. Press and hold broil until F or C appears in the display.
4. Press or to change to F or C.
5. Press any control key to return to normal operating
mode.
Operating the Oven Light
The oven light is located at the upper rear corner of
the oven interior and is covered with a glass shield. The
shield must be in place whenever the oven is in use.
The oven light will automatically turn on when the oven door
is opened. Press the oven light icon located on the left side
of the control panel to turn the oven light on whenever the
oven door is closed.
For best results when baking, leave the oven light off.
To change the interior oven light, see “Replacing the Oven
Light” on page 22.
Minute Timer
To set the minute timer:
1. Press Timer on -off.
2. Press to increase time in one minute increments.
Press and hold to increase time in 10 minute increments. The timer can be set for any amount of time from
1 minute to 11 hours and 59 minutes.
If is pressed first, the timer will advance to 11 hours
and 59 minutes.
3. When the set time ends, the timer will beep three times
and will continue to beep three times every minute until
timer
on-off is pressed.
T o change the minute timer while it is in use:
While the timer is active and shows in the display , press and
hold the
remaining.
To cancel the minute timer before set time expires:
Press timer on-off once.
• The indicator light located above the timer on-off key
• The minute timer displays hours and minutes until 1
• The minute timer will not start or stop the cooking
or to increase or decrease the time
will glow while the minute timer is active.
hour remains on the timer. Less than 1 hour, the
display counts down in minutes and seconds. With
less than 1 minute, only seconds will display.
process. Use the minute timer alone or with any of the
other oven features. If another feature is active when
the minute timer is active, the minute timer will show
in the display. To view information about other active
features, press the key for that feature.
14
OVEN CONTROLS FUNCTIONS
CAUTION
Setting Bake
The oven can be programmed to bake at any temperature
from 170°F to 550°F (77°C to 288°C). The factory preset
automatic bake temperature is 350°F (176°C).
Always use pot holders or oven mitts when using the
oven. When cooking, the oven interior , e xterior, and oven
racks become very hot which can cause burns.
For best results:
• Fully preheat the oven before baking items like cookies,
cakes, biscuits, or breads.
• Leave oven light off while baking.
• Use single rack for baking for best baking performance.
Rack position 3 is recommended as shown here:
To set bake:
1. Press bake. The display will show — — —.
2. Within 5 seconds, press or . The display will
show 350°F (176°C). The temperature can then be
adjusted in 5°F (1°C) increments by pressing and
holding the
3. When the key is released, the oven will begin heating to
the selected temperature. When the displayed tempera
ture reaches the set temperature, the preheat indicator
light will turn off and the control will emit one long beep.
To change oven temperature after bake has started:
1. Press bake.
2. Press or to increase or decreas e to a new
temperature. The oven indicator light on the electronic
display will turn on and off when using the bake feature
and during preheat. This is normal and indicates that
the oven is cycling to maintain the selected baking
temperature.
3. To cancel ba kin g pr es s Off.
or .
-
• When baking cakes using 2 racks, place bakeware on
oven rack positions 3 and 5 and place the cake pans as
shown. (
• Use positions 3 and 5 when baking cookies on multiple
pans.
• Allow 2 to 4 inches (5.1 cm to 10.2 cm) of space
between bakeware to allow for proper air circulation.
• Dark or dull pans and glass absorb more heat than
shiny bakeware resulting in dark or over browning of
foods. It may be necessary to reduce the oven tempera
ture or cook time to prevent over browning of some
foods. Dark pans are recommended for pies. Shiny
pans are recommended for cakes, cookies and muffins.
• Do not open the oven door too often. Doing so will
reduce the temperature in the oven and increase
cooking time.
See Figure 3)
Figure 3: Rack positions (L) and pan spacing (R)
-
15
OVEN CONTROLS FUNCTIONS
WARNING
CAUTION
NOTE
Setting Broil
Use the broil feature to cook meats that require direct
exposure to radiant heat for optimum browning results.
Broiling will produce some smoke. If smoke is excessive,
place food further away from the element. Watch food to
prevent burning. When broiling always remember to
arrange the oven racks while oven is still cool. Position the
rack as suggested in
ovens” page 17.
Should an oven fire occur, close the oven door and turn
the oven off. If the fire continues, use a Class B/C fire
extinguisher. Do not put water or flour on the fire. Flour
may be explosive.
Always use oven mitts. Oven racks will become very hot
which can cause burns.
Broiling tips:
• If using broil pan and insert, place insert on broil pan.
Place on oven rack, preheat on broil HI for 10 minutes
before placing food on insert. Broil with the oven door
closed.
• Always use the broiler pan with the insert when broiling.
It allows the dripping grease to be kept away from the
high heat of the broil element. Do not use the pan
without the insert.
• Always pull the rack out to the stop position before
turning or removing food.
• Do not cover the broil pan insert with aluminum foil. The
exposed grease could catch fire. Do not use a roasting
rack when broiling.
“Suggested broil settings for electric
To set broil:
1. Arrange the oven rack while oven is still cool.
2. Press broil. The display will show — —.
3. Press for HI broil or for LO broil. Most foods may
be broiled at the HI broil setting.
4. For optimum results, preheat pan using Broil HI for 10
minutes before placing food on pan.
5. Boil with the oven door closed.
6. Broil on one side until food is browned. Turn and broil
food on the other side.
When broiling is finished press OFF.
Figure 4: Rack positions (L) Broil pan and insert (R)
If a broil pan and insert are not supplied with your
appliance you may order one from frigidaire.com.
16
Table 1: Suggest ed broil settings for electric ovens
OVEN CONTROLS FUNCTIONS
Food item Rack Position Temp
Steak 1” thick 5th Hi 5 4 140°F (60°C) Rare**
Steak 1” thick 5th Hi 6 4 145°F (63°C) Medium-rare
Steak 1” thick 5th Hi 7 5 170°F (77°C) Medium-well
Pork Chops 3/4 “thick 5th Hi 8 6 170°F (77°C) Well
Chicken - Bone In 4th Hi 20 10 170°F (77°C) Well
Chicken Boneless 3rd Hi 8 6 170°F (77°C) Well
Fish 3rd Hi as directed
Shrimp 3rd Hi 170°F (77°C) Well
Hamburger 1” thick 4th Hi 5 4 145°F (63°C) Rare**
Hamburger 1” thick 4th Hi 9 7 145°F (63°C) Medium-rare
Hamburger 1” thick 4th Hi 10 8 170°F (77°C) Well
** The U.S. Department of Agriculture states, “Rare fresh beef is popular, but you should know that cooking it to only 140°F (60°C)
means some food poisoning organisms may survive.” (Source: Safe Food Book, Your Kitchen Guide, USDA Rev. June
1985.) The lowest temperature recommended by the USDA is 145°F (63°C) for medium rare fresh beef. For well done
170°F (77ºC).
Cook time in minutes
1st side 2nd side
as directed
Internal Temp Doneness
170°F (77°C) Well
17
OVEN CONTROLS FUNCTIONS
NOTE
Adjusting the Oven Temperature
Your appliance has been factory calibrated and tested to
ensure an accurate baking temperature. For the first few
uses, follow your recipe times and temperature recommen
dations carefully. If you think the oven is cooking too hot or
too cool for your recipe times, you can adjust the control so
the oven cooks hotter or cooler than the temperature
displayed.
Important: Do not use oven thermometers such as those
found in grocery stores to check the temperature settings
inside your oven. These oven thermometers may vary as
much as 20ºF to 40ºF (11ºC to 23ºC) from actual temperatures.
• If at any time during the process of adjusting the oven
temperature feature you decide not to make the
change, press the OFF key once before the acceptance
beep.
• The oven temperature adjustment feature cannot be
modified if Bake or Broil is active.
• Oven temperature adjustments made will not affect the
broil or self cleaning feature temperatures.
To adjust oven temperature:
1. Press bake while the oven is idle.
2. Set the temperature to 550°F (288°C) by pressing and
-
holding
3. Within 3 seconds, press and hold bake until numeric
digit(s) appear.
4. Release bake. The display now indicates the a mount of
degrees offset between the original facto ry temperature
setting and the current temperature setting. If the oven
control has the original factory calibration, the display
will read 0.
5. The temperature can now be adjusted ±35°F (±19° C) in
5°F (1ºC) increments. Press and hold
temperature higher until the desired amount of offset
appears in the display. When lowering the oven temper
ature press . A minus sign (-) will appear before the
number to indicate that the oven will be cooler by the
displayed amount of degrees.
6. When you have made the desired adjustment, press
OFF to return to the time of day display .
.
to adjust the
-
• If at any time during the process of adjusting the oven
temperature feature you decide not to make the
change, press the OFF key once before the accep
tance beep.
-
18
CAUTION
CARE AND CLEANING
Remove spills and any heavy soiling as soon as possible.
Regular cleaning will reduce the difficulty of major cleaning
later.
• Before cleaning any part of the appliance, be sure all
controls are turned off and the appliance is cool.
• If ammonia or appliance cleaners are used, they must
be removed and the appliance must be thoroughly
rinsed before operating. Follow manufacturer's
instructions and provide adequate ventilation.
Figure 5: Use cleaners with caution
Surface or Area Cleaning Recommendation
Aluminum and vinyl Using a soft cloth, clean with mild dish detergent and water. Rinse with clean water, dry and
polish with a soft, clean cloth.
Painted and plastic control knobs
Painted body parts
Painted decorative trims
Control panel Using a soft cloth, clean with mild dish detergent and water or a 50/50 solution of vinegar and
Control knobs Using a soft cloth, clean with mild dish detergent and water or a 50/50 solution of vinegar and
Stainless Steel Using a soft cloth, clean with mild dish detergent and water or a 50/50 solution of vinegar and
Smudge Proof™ Stainless Steel
Black Stainless Steel
Manual clean oven interior The oven interior is porcelain coated and safe to clean using oven cleaners. Always follow
Using a soft cloth, clean with mild dish detergent and water or a 50/50 solution of vinegar and
water. Rinse with clean water, dry and polish with a soft, clean cloth. Glass cleaners may be
used, but do not apply directly to surface; spray onto cloth and wipe.
water. Do not spray liquids directly on the oven control and display area. Do not use large
amounts of water on the control panel - excess water on the control area may cause damage
to the appliance. Do not use other liquid cleaners, abrasive cleaners, scouring pads, or paper
towels - they will damage the finish.
water. To remove control knobs: turn to the OFF position, grasp firmly, and pull off the shaft. To
replace knobs after cleaning, line up the OFF markings and push the knobs into place.
water. Rinse with clean water, dry with a soft clean cloth. Do not use cleaners containing abra
sives, chlorides, chlorine, or ammonia.
Using a soft cloth, clean with mild dish detergent and water or a 50/50 solution of vinegar and
water. Rinse with clean water, dry with a soft clean cloth. Do not use appliance cleaner,
stainless steel cleaner, or cleaner containing abrasives, chlorides, chlorine, or ammonia.
These cleaners may damage the finish.
manufacturer's instructions for cleaners. After cleaning, remove any oven cleaner or the
porcelain may become damaged during future heating. Do not spray oven cleaner on any elec
trical controls or switches. Do not spray or allow oven cleaner to build up on the oven temperature sensing probe. Do not spray cleaner on oven door trim, door gasket, plastic drawer glides,
handles or any exterior surfaces of the appliance.
-
-
19
CARE AND CLEANING
WARNING
WARNING
Porcelain-enameled broiler pan and
insert
Porcelain door liner
Porcelain body parts
Oven door Use mild dish detergent and water or a 50/50 solution of vinegar and water to clean the top,
Aluminum Foil and Utensils
Never cover any slots, holes, or passages in the oven
bottom or cover an entire oven rack with materials such
as aluminum foil. Aluminum foil linings may trap heat,
causing a fire hazard.
Rinse with clean water and a damp cloth. Scrub gently with a soapy, non-abrasive scouring
pad to remove most spots. Rinse with a 50/50 solution of clean water and ammonia. If neces
sary, cover dif ficult spots with an ammonia-soaked paper towel for 30 to 40 minutes. Rinse and
wipe dry with a clean cloth. Remove all cleaners or future heating could damage the porcelain.
Do not allow food spills with a high sugar or acid content (milk, tomatoes, sauerkraut, fruit
juices or pie filling) to remain on porcelain surfaces. These spills may cause a dull spot even
after cleaning.
sides, and front of the oven door. Rinse well. Glass cleaner may be used on the outside glass
of the door. Ceramic smoothtop cleaner or polish may be used on the interior door glass. Do
not immerse the door in water. Do not spray or allow water or cleaners to enter the door vents.
Do not use oven cleaners, cleaning powders, or any harsh abrasive cleaning materials on the
outside of the oven door.
Do not clean the oven door gasket. The oven door gasket is made of a woven material which is
essential for a good seal. Do not rub, damage, or remove this gasket.
-
Protective Liners — Do not use aluminum foil to line the
oven bottom. Improper installation of these liners may
result in risk of electric shock or fire.
20
Removing and Replacing the Oven Door
CAUTION
IMPORTANT
Oven door
hinge
locations
L
O
C
K
about
10°
hinge
oven
door
roller
pin
hinge
arm
To remove oven door:
The door is heavy. For safe, temporary storage, lay the
door flat with the inside of the door facing down.
1. Open oven door completely, horizontal with floor (See
Figure 6).
2. Pull the door hinge locks on both left and right door
hinges down from the oven frame completely towards
the oven door (See
flat-blade screwdriver may be required.
3. Firmly grasp both sides of oven door along the door
sides. Do not use the oven door handle (See
4. Close the door to approximately 10 degrees from the
door frame (See
5. Lift the oven door hinge arms over the roller pins
located on each side of the oven frame (See
To replace oven door:
Figure 7). A tool such as a small
Figure 8).
Figure 8).
Figure 9).
CARE AND CLEANING
Figure 6: Door hinge location
Figure 7: Door hinge locks
1. Firmly grasp both sides of oven door along the door
sides. Do not use the oven door handle (See
Figure 8).
2. Holding the oven door at the same angle as the removal
position, seat the hook of the hinge arm over the roller
pins located on each side of the oven door frame (See
Figure 8 and Figure 9). The hook of the hinge arms
must be fully seated onto the roller pins.
3. Fully open the oven door, horizontal with floor (See
Figure 6).
4. Push the door hinge locks up towa rds and into the oven
frame on both left and right oven door hinges to the
locked position (See
Figure 7).
5. Close the oven door.
Special door care instructions - Most oven doors contain
glass that can break. Do not hit the glass with pots, p an s,
or any other object. Scratching, hitting, jarring, or
stressing the glass may weaken its structure, causing an
increased risk of breakage at a later time. Do not close
the oven door until all of the oven racks are fully in place.
Figure 8: Holding door for removal
Figure 9: Replacement and location of hinge arm and
roller pin
21
CARE AND CLEANING
CAUTION
NOTE
Replacing the Oven Light
The interior oven lights are located at the rear of the oven
cavity and are covered with a glass shield. The glass shield
must be in place whenever the oven is in use (See
Figure 10).
To replace the oven interior light bulb:
Be sure the oven is unplugged and all parts are cool
before replacing oven light.
1. Turn electrical power off at the main source or unplug
the appliance.
2. Remove interior oven light shield by turning a quarter
turn counter-clockwise.
3. Replace bulb with a new T-4 type Halogen 25 watt
appliance bulb.
Do not allow your fingers to touch the new bulb when
replacing. This will shorten the life of the bulb. Use a
paper towel or cotton glove while handling the new bulb
when installing.
Remove and replace storage drawer (some models)
Use the storage drawer for storing cooking utensils. The
drawer can be removed to facilitate cleaning under the
range. Use care when handling the drawer.
To remove the drawer:
1. Pull empty drawer out until it stops.
2. Tilt up the front of the drawer up and pull it out over the
glide stop.
To replace the drawer:
1. Insert the back of the drawer into the opening.
2. Lift up the drawer and line up the drawer supports with
the rails. Make sure to clear the glide stop.
3. Push in the drawer until it stops.
4. Replace glass oven light shield by rotating clockwise.
5. Turn power back on again at the main source (or plug
the appliance back in).
6. Be sure to reset the time of day on the clock
Figure 10: Wall oven Halogen light
22
BEFORE YOU CALL
Solutions to Common Baking Problems
For best cooking results, heat the oven before baking cookies, breads, cakes, pies or pastries, etc. There is no need to
preheat the oven for roasting meat or baking casseroles.
The cooking times and temperatures needed to bake a product may vary slightly from your previously owned appliance.
Baking Problems and Solutions Chart
Baking Problems Causes Corrections
Cookies and biscuits
burn on the bottom.
Cakes too dark on top
or bottom.
Cakes not done in
center
Cakes not level. • Range no t leve l.
.
• Cookies and biscuits put into
oven before the preheating time
is completed.
• Oven rack is overcrowded.
• Dark pan absorbs heat too fast.
• Cakes put in oven before
preheating time is completed.
• Rack position too high or too
low.
• Oven too hot.
• Oven too hot.
• Incorrect pan size.
• Pan not centered in oven.
• Pan too close to oven wall or
rack overcrowded.
• Pan warped.
• Oven light left on while baking.
• Allow oven to preheat to desired temperature before
placing food in oven.
• Choose pan sizes that will permit 2 to 4 inches (5.1
cm to 10.2 cm) space on all sides when placed in
the oven.
• Use a medium weight baking sheet.
• Allow oven to preheat to the selected temperature
before placing food in the oven.
• Use proper rack position for baking needs.
• Set oven temperature 25°F (13°C) lower than
recommended.
• Set oven temperature 25°F (13°C) lower than
recommended.
• Use pan size suggested in recipe.
• Use proper rack position and place pan to allow 2 to
4 inches (5.1 cm to 10.2 cm) space on all sides of
pan.
• Place a marked glass measuring cup filled with
water on the center of the oven rack. If the water
level is uneven, refer to the installation instructions
for leveling the range.
• Be sure to allow 2 to 4 inches (5.1 cm to 10.2 cm)
clearance on all sides of each pan in the oven.
• Do not use pans that are dented or warped.
• Turn off oven light while baking.
Foods not done when
cooking time is over
• Oven too cool.
.
• Oven overcrowded.
• Oven door opened too
frequently.
• Set oven temperature 25°F (13°C) higher than
suggested and bake for the recommended time.
• Be sure to remove all pans from the oven except the
ones to be used for baking.
• Open oven door only after shortest recommended
baking time.
23
BEFORE YOU CALL
Solutions to Common Problems
Before you call for service, review the following list. It may sa ve yo u tim e and ex pe n se. Possible solutions are provided
with the problem listed:
Problem Solution
Oven control panel beeps and
displays error codes
Poor baking results • Many factors effect baking results. Use proper oven rack position. Center food in
Appliance is not level • Poor installation. Place oven rack in center of oven. Place a level on the oven rack.
Cannot move appliance easily • Contact builder or installer to make appliance accessible.
Appliance does not operate • Make sure power cord is wired properly into outlet.
Flames inside oven or smoking
from oven vent
• Oven control has detected a fault or error condition. Press OFF to clear the error
code.
• Try bake or broil function. If the F or E code error repeats, turn off power to appliance, wait 5 minutes and then repower appliance. Set clock with correct time of
day. Try bake or broil function again. If fault recurs, press OFF to clear.
the oven and space pans to allow air to circulate. Preheat oven to the set tempera
ture before placing food in the oven.
• Try adjusting the recipe's recommended temperature or baking time. See
“Adjusting the Oven Temperature” on page 18 if you feel the oven is too hot or cold.
• Kitchen cabinet alignment may make oven appear not level. Be sure cabinets are
square and have sufficient room for appliance cleara nce. If cabinet s are not square
or are built in too tightly, contact builder or installer to make appliance accessible.
• Electrical power outage. Check house lights to be sure. Call your local electric
company for service outage information.
• Service wiring is incomplete. Call 1-800-944-9044 for assistance.
• Excessive spills in oven. Grease or food spilled onto oven bottom or oven cavity.
Wipe up excessive spills before starting oven. If flames or excessive smoke are
present when using Broil, see
“Setting Broil” on page 16.
-
24
BEFORE YOU CALL
Oven does not operate. • The time of day is not set. The oven clock must first be set in order to operate the
oven. See
• Be sure oven controls are set properly. See “Oven Controls Functions” beginning
on page 13 and review instructions for the desired cooking function in this manual.
• Make sure the valve on the regulator is OPEN. If the valve is closed the oven will
not operate; The illustration shows the valve in the closed position and the open
position. See installation instructions for further information.
“Setting the Clock” on page 13.
CLOSED OPEN
Oven smokes excessively when
broiling.
Oven light does not work. • Be sure the oven light is secure in the socket. See ““Replacing the Oven Light” on
• Incorrect setting. See “Setting Broil”on page 16.
• Meat too close to the broil element. Reposition broil rack to provide proper
clearance between the meat and broil element. Remove excess fat from meat. Cut
remaining fatty edges to prevent curling, but do not cut into lean.
• Grease build up on oven surfaces. Regular cleaning is necessary when broiling
frequently. Grease or food splatters will cause excessive smoking.
page 21
25
WARRANTY
Your appliance is covered by a one year limited warranty. For one year from your original date of
purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove
to be defective in materials or workmanship when such appliance is installed, used and maintained in
accordance with the provided instructions.
Exclusions
This warranty does not cover the following:
1. Products with original serial numbers that have been removed, altered or cannot be readily determined.
2. Product that has been transferred from its original owner to another party or removed outside the USA or
Canada.
3. Rust on the interior or exterior of the unit.
4. Products purchased “as-is” are not covered by this warranty.
5. Food loss due to any refrigerator or freezer failures.
6. Products used in a commercial setting.
7. Service calls which do not involve malfunction or defects in materials or workmanship, or for appliances
not in ordinary household use or used other than in accordance with the provided instructions.
8. Service calls to correct the installation of your appliance or to instruct you how to use your appliance.
9. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves,
etc., which are not a part of the appliance when it is shipped from the factory.
10. Service calls to repair or replace appliance light bulbs, air filters, water filters, other consumables, or knobs,
handles, or other cosmetic parts.
11. Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip
charges, or mileage expense for service calls to remote areas, including the state of Alaska.
12. Damages to the finish of appliance or home incurred during installation, including but not limited to floors,
cabinets, walls, etc.
13. Damages caused by: services performed by unauthorized service companies; use of parts other than
genuine Electrolux parts or parts obtained from persons other than authorized service companies; or
external causes such as abuse, misuse, inadequate power supply, accidents, fires, or acts of God.
CUSTOMER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT
REPAIR OR REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES, INCLUDING
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR
OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR. ELECTROLUX SHALL NOT
BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL
EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN LIMITED WARRANTY OR ANY IMPLIED
WARRANTY. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, SO THESE
LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.
Keep your receipt, delivery slip, or some other appropriate payment record to establish the warranty period
should service be required. If service is performed, it is in your best interest to obtain and keep all receipts.
Service under this warranty must be obtained by contacting Electrolux at the addresses or phone
numbers below.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
This warranty only applies in the USA and Canada. In the USA, your appliance is warranted by Electrolux Major Appliances
North America, a division of Electrolux Home Products, Inc. In Canada, your appliance is warranted by Electrolux Canada Corp.
Electrolux authorizes no person to change or add to any obligations under this warranty. Obligations for service and parts under
this warranty must be performed by Electrolux or an authorized service company. Product features or specifications as described
or illustrated are subject to change without notice.
If You Need
Service
Canada
1.800.265.8352
Electrolux Canada Corp.
5855 Terry Fox Way
Mississauga, Ontario, Canada
L5V 3E4
USA
1.800.944.9044
Electrolux Home Products, Inc.
10200 David Taylor Drive
Charlotte, NC 28262
Loading...