Frigidaire FFBC46L2QS0, FFBC46C2QS0, FFBC46L2QS1, FFBC46L2QS, FFBC46C2QS1 Owner’s Manual

...

Controls ....................................... 7

call...............................................9

en0........................iiiii...................°

_n_e_r_n_ ..............................._

www,frigidaire,com USA1-800-944-9044 www,frigidaire,ca Canada 1-800-265-8352

Read and Save These Instructions

This Owner's Guide provides specific operating instructions for your model. Use your Beverage Cooler only as instructed in this guide. These instructions are not meant to cover every possible condition and situation that may occur. Common sense and caution must be

)racticed when installing, operating, and maintaining any

appliance.

Record Your Hodel and Serial Numbers

Record the model and serial numbers in the space

)rovided below. The serial plate is located on the upper

left wall inside the cabinet. Model Number:

Serial Number: Purchase Date:

Please read all instructions before using this Beverage Cooler,

Definitions

This is the safety alert symbol. It is used to alert

you to potential personal injury hazards. Obey all safety

messages that follow this symbol to avoid possible injury

or death,

IMPORTANT indicates installation, operation or maintenance information which is important but not

hazard-related.

_ DANGER

DANGER Risk of fire or explosion.Flammable refrigerant used. Do not use mechanical devices to

defrost refrigerator. Do not puncture refrigerant tubing.

DANGER Risk of fire or explosion.Flammable refrigerant used.To be repaired only by trained service

oersonnel. Do not puncture refrigerant tubing.

_ CAUTION

CAUTION Risk of fire or explosion.Flammable

refrigerant used.Consult repair manual/owner_ guide before affempting to service this product. All safety

precautions must be followed.

CAUTION Risk of fire or explosion.Dispose of property

in accordance with federal or local regulations. Flammable refrigerant used.

CAUTION- Risk of fire or explosion due to puncture of

refrigerant tubing ;Follow handling instructions carefully. Flammable refrigerant used.

DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate

injury. ................................

Electrical Information

- The beverage cooler must be plugged into its own dedicated 115 Volt, 60 Hz., 15

Amp, AC only electrical outlet. The power cord of the appliance is equipped with a three-

prong grounding plug for your protection against

electrical shock hazards. It must be plugged directly into a properly grounded three prong

receptacle. The receptacle must be installed in

accordance with local codes and ordinances. Consult a qualified electrician. Avoid connecting

refrigerator to a Ground Fault Interrupter (GFI)

circuit. Do not use an extension cord or adapter plug.

- If the power cord is damaged, it should be replaced by an authorized service technician to prevent any risk.

o Never unplug the appliance by pulling on the

power cord. Always grip the plug firmly, and pull straight out from the receptacle to prevent

damaging the power cord.

Unplug the appliance before cleaning and before replacing a light bulb to avoid electrical shock.

Performance may be affected if the voltage

varies by 10% or more. Operating the unit with

insufficient power can damage the compressor. Such damage is not covered under your warranty.

Do not plug the appliance into an electrical outlet

controlled by a wall switch or pull cord to prevent

the appliance from being turned off accidentally.

Grounding type

wall receptacle

f Do not, under

any circumstances

CUt_ remove_

or bypass the

grounding prong.

Child Safety

Destroy carton, plastic bags, and any exterior wrapping material immediately after the wine cooler is unpacked. Children should never use

these items to play. Cartons covered with rugs,

bedspreads, plastic sheets or stretch wrap may become airtight chambers, and can quickly cause

suffocation.

Remove all staples from the carton. Staples can cause severe cuts, and destroy finishes if they come in contact with other appliances or furniture.

An empty, discarded appliance is a very dangerous

attraction to children.

• Remove the door(s) of any appliance that is not in use, even if it is being discarded.

Proper Disposal of your Beverage Cooler

Risk of child entrapment

Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still

dangerous - even if they will sit for "just a few days". If you are getting rid of your old appliance, please follow the instructions below to help prevent accidents.

We strongly encourage responsible appliance recycling/

disposal methods. Check with your utility company or visit www.recyclemyoldfridge.com for more information

on recycling your old appliance.

Before you throw away your old beverage

cooler:

* Remove doors.

Leave shelves in place so children may not easily

climb inside.

Have refrigerant removed by a qualified service

technician.

Power cord with 3-prong grounded plug

This Use & Care Guide provides general operating instructions for your model. Use the appliance only as instructed in this Use & Care Guide. Before starting the appliance, follow these important first steps.

Location

o Choose a place that is near a grounded electrical

outlet. Do Not use an extension cord or an adapter

plug.

For optimal performance, it is recommended that you install the appliance where the ambient temperature is between 70 and 78 degrees

Fahrenheit. Allow space around the unit for good air circulation.

Leave a 2 inch space on the back and sides of the wine cooler for adequate circulation.

Be sure the appliance stays in the upright position during transport.

Keep the appliance from any hazardous or combustible agents.

The exterior walls of the beverage cooler may become quite warm as the compressor works to transfer heat

from the inside. Temperatures as much as 30° F warmer than room temperature can be expected. For

this reason it is particularly important in hotter climates to allow enough space for air circulation around your

appliance.

Cleaning

Wash any removable parts of the beverage cooler

interior, and exterior with mild detergent and warm

water. Wipe dry. Do not use harsh cleaners on these

surfaces,

Do not use razor blades or other sharp instruments,

which can scratch the appliance surface when

removing adhesive labels. Any glue left from the tape

can be removed with a mixture of warm water and

mild detergent, or touch the residue with the sticky side of tape already removed. Do not remove the serial plate.

Important Safeguards: Do not store food in your wine cooler as interior temperature may not get cool enough to prevent spoilage. In summer months or areas of high

humidity, the glass door may build up moisture. To

remove the moisture, wipe it away.

Handle Installation

Place handle over the two mounting studs located at

top of door.

Use hex head screw driver or Allen wrench to tighten

set screws from bottom to secure handle to door.

Mounting stud

Locate handle

Leveling

The beverage cooler must have all bottom corners resting firmly on solid floor. The floor must be strong enough to support a fully loaded beverage cooler. NOTE: It is Very Important for your appliance to be level in order to function properly. If the appliance is not leveled during installation, the door may be misaligned and not close or seal properly, causing cooling, frost, or moisture problems.

To Level Your Beverage Cooler:

After removing all interior and exterior packaging materials, use a carpenter's level to level the beverage cooler from front-to-back. Adjust the leveling legs in front, 1/2bubble higher, so that the door closes easily

when left halfway open.

Set screws

+ 7 hidden pages