Frigidaire FCRS201RFW0, FCRS201RFB2, FCRS201RFB0, FCRS201LFW0, FCRS201LFB0 Owner’s Manual

...

FRIGIDAIRE

COMMERCIAL

COMMERCIAL FREEZER/REFRIGERATOR

GLASS DOOR REFRIGERATOR

TABLE OF CONTENTS

Product Registration ................................................ 2

Important Safety Instructions .................................... 2

Electrical Information ............................................... 3

Installation and Setup ............................................... 3-4

Appliance Start-up .................................................... 5

Features ................................................................. 5

Routine Maintenance ............................................... 6

Energy Conservation Measures ................................. 7

Troubleshooting Guide ............................................. 8-9

Wiring Diagram ....................................................... 10

Warranty ............................................................... 11

READ AND SAVE THESE INSTRUCTIONS 297068700(Feb.2006)

Product Registration

These instructions include information which is intended to assure the operator of correct installation, operation and service.

Before attempting installation, adjustment or maintenance, be certain of the following:

Important Safety Instructions

Read all instructions before using this appliance

For Your Safety

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this unit or any other appliance. Read

product labels for flammability and other warnings.

Child Safety

• Destroy carton, plastic bags, and any exterior wrapping material immediately after the appliance is unpacked. Children should

never use these items for play. Cartons covered with rugs, bedspreads, plastic sheets or stretch wrap may become airtight chambers and can quickly cause suffocation.

• A child might suffocate if he crawls into the appliance to hide or play. Remove the door/lid of the appliance when not in use, even if you plan to discard the appliance. Many communities

have laws requiring you to take this safety precaution.

• That you have read and fully understand the instructions.

• That you have all the tools required and are trained to use them.

• That you have met all installation and usage restrictions and are familiar with the functions and operations of the unit.

• That you follow all instructions exactly as given.

All the fittings, measurements, recommendations and procedures

are significant. Substitutions and approximations must be avoided. Improper handling, maintenance, installation and adjustment, or service attempted by anyone other than a qualified technician, may void the future warranty claims and cause damage to the unit and/or result in injury to the operator and/or

bystanders.

Record your Model and Serial Numbers

Record the model number and serial number of this appliance in the space provided below (the serial plate is located inside the cabinet compartment).

Model No. Serial No.

Installation Date Invoice Date

Start-up Date Telephone for Service

Proper Disposal of Appliance

Risk of Child Entrapment

Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators or freezers are still dangerous

- even if they will sit for "just a few days". If you are getting rid of your old refrigerator or freezer, please follow the instructions below to help prevent accidents:

• Remove the door.

• Leave shelves in place so children may not easily climb

inside.

• Have the refrigerant removed by a qualified technician.

above) should be filled in completely, signed and returned to the address provided.

Electrical Information

These guidelines must be followed to ensure that safety mechanisms in the design of this appliance will operate

properly.

Avoid fire hazard or electric shock. Do not use an extension cord or an adapter plug. Do not remove any

prong from the power cord.

Grounding type walmreceptacle

Powersuppmy cord with 3-prong grounding pmug

• Refer to the serial plate for correct electrical rating. The power cord of the appliance is equipped with a three-prong grounding plug for protection against shock hazards. It must be plugged directly into its own properly grounded three-prong receptacle, protected with a 15 amp time delay fuse or circuit

breaker. The receptacle must be installed in accordance with the local codes and ordinances. Consult a qualified electrician. Receptacles with Ground Fault Circuit Interrupters (GFCI) are

NOT RECOMMENDED. DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG.

• If the voltage varies by 10 percent or more, appliance performance may be affected. Operating the appliance with insufficient power can damage the motor. Such damage is not covered under the warranty. If you suspect your voltage is high or low, consult your power company for testing.

• To prevent the appliance from being turned off accidentally, do not plug the unit into an outlet controlled by a wall switch or pull cord.

• DO NOT pinch, knot, or bend the power cord in any manner.

Installation and Setup

Inspection for Damage

inspect the underside of the cabinet and packaging for damage such as a fork truck can cause. If hidden damage is found after

uncrating, immediately call the delivery carrier and request an inspection. Retain all packaging and crating materials until the inspection is complete.

Uncrating and Set-up

• Remove carton and all loose parts from inside of the unit.

• Tip the unit onto its back with the help of one assistant. Lay the unit gently to rest on blocks to avoid damaging the

condensate drain hose, and the plastic raceway that covers the evaporator tubing on the back of the cabinet.

• Remove and discard the two (2) wood skids from the bottom and the four (4) screws (see the Fig. 1).

• Remove the bottom door hinge and screw on the lower left hand side of the cabinet used to support the glass door during shipping using a 3t8 socket wrench (see Fig. 2).

• Remove the package containing the casters from the unit. This package will contain the following items:

• Two (2) caster rail supports (A)

• Two (2) spacer plates (B)

• Eight (8) carriage bolts (C)

• Four (4) bolts (D)

• Four (4) washers (E)

• Eight (8) locking nuts (F)

• Two (2) swivel casters (G)

• Two (2) fixed casters with brakes (H)

( o o:30:]

B C D E F G H

Figure 1

Other Precautions

• NEVER unplug the appliance by pulling on the power cord. Always grip the plug firmly and pull straight out from the

receptacle.

• To avoid electrical shock, unplug the appliance before

cleaning.

NOTE: Turning the control to "OFF" turns off the compressor but does not disconnect power to other electrical components.

Wood Skid

Figure 2

FrontFixedCasterInstallation

• Put two (2) carriage bolts through the rear (non-brake) side of the fixed caster and hold the carriage bolts loosely in place by threading several turns each on the locking nuts. Do not tighten the bolts yet.

• Hold the caster in position, insert the carriage bolt heads into the slots near the front of the caster rail and slide the caster

back.

• Insert the two (2) front carriage bolts thru the top side of the caster rail and then thru the front holes on the caster. Attach

locking nuts to each.

• Tighten all locking nuts securely using a ½ inch end wrench or socket wrench (see Fig. 3).

• Repeat the same procedure for the other fixed caster.

Fig. 5

_" *_, Spacer Plates 4 _1

Bolts _' _%"Swivel Caster

Caster

- Locking Nuts

Fig. 3

Rear Swivel Caster Installation

• Place a washer on a long bolt and then feed the bolt through

the hole in the swivel caster.

• Next, insert the caster bolt through the hole on the metal spacer and then thru the rear hole of the caster rail (see Fig. 4).

Washer

Caster Swivel __

Fig. 4

• Place a washer onto a long bolt and slide bolt through the hole located just behind the fixed caster at the front of the

caster rail.

• Align bolt with the hole in the front foot of the right hand base rail. Thread bolt into the hole and tighten securely using a ½ inch end wrench or socket wrench (see Fig. 6).

• Repeat the same procedure for the left hand caster rail assembly. After installation, tip the unit up with the help of an

assistant.

Washer

Bolt

Fig. 6

Appliance Placement

Leave a one (1) inch space on all sides and the back of the cabinet for ease of installation, proper air circulation and electrical

connections. DO NOT block the front grill on the lower front of your appliance. Sufficient air circulation is essential for the proper operation of your appliance. Choose a place that is near

a grounded electrical outlet. For the most efficient operation, the appliance should be located where surrounding temperatures

will not drop below 40°F (5°C) or exceed 110°F (43°C). Additional

compressor heaters are not recommended.

Caster Rail Installation

• Holding the swivel caster in place, align the caster rail assembly with the right hand bottom side of the unit.

• Thread the caster bolt into the hole in the bottom-most foot pad on the base rail.

• Tighten the bolt securely using a ½ inch end wrench or socket wrench (see Fig. 5).

• Repeat the same procedure on the left hand side with the

other swivel caster and caster rail assembly.Fig. 6

+ 7 hidden pages